Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
i think you should try to download latest version and flash
and i think it is a nightly so you will have some isusse
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
yes i use.
I've experienced the first screen on my tab the first time I tried the Easter egg on SlimKat. Never had a problem since... does the Easter egg persist to do this?
Swyped from my P3110 running SlimKat from the XDA Premium HD app!
happened in all roms :\
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
It happened with all kitkat roms i have installed on my p5100 (omni , mokki, cm , sonic hd )
I think that tab 2 10.1 hardware is not good enough to run kitkat animation on this resolution or screen size
Note : it worked perfectly on my samsung s gti9000
No Logcat = No Problem
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Abade002 said:
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Click to expand...
Click to collapse
Nope, you should not need to install the stock ROM if the current ROM is stable enough for you to download the updated recovery. Once you have it downloaded, update the recovery. Then maybe do a complete wipe/factory reset from the recovery, then reinstall CM 11 (or any other) fresh.
Related
Hello All
Any one have idea to install custom ICS or JB Rom in Bluestacks, ?
I need to install new android version inside.
Thanks All​
nagar.xda said:
Hello All
Any one have idea to install custom ICS or JB Rom in Bluestacks, ?
I need to install new android version inside.
Thanks All​
Click to expand...
Click to collapse
+1
anybody?
yonijuerga said:
+1
anybody?
Click to expand...
Click to collapse
LOOK HERE THESE ARE THE ROM RELEASES BUT DONT EXPECT ANYTHING LIKE CUSTOM JB OR ICS ROMS...
http://forum.xda-developers.com/wiki/BlueStacks_App_Player
jb
JB roms are pretty buggy right now, not sure if it's the same for everyone though.
i have a samsung gt p3100 rooted, still on ICS. i've tried the cyanogenmod 10.1.2, it works okey, but i get a distorted screen before the cyanogenmod animation appears.
how do we fix this?
do i need to flash a jb bootloader after flashing cyanogenmod based on jellybean? or can i just leave my ics bootloader untouched? will that solved issues about the bootscreen being distorted?
just a follow up, if i flash a jb bootloader, will that still work if i switch back to stock ics?
thanks
Bootloader is not divided like ics or jb that is device specific so dont touch bootloader.. try other things..
mckoy_g said:
i have a samsung gt p3100 rooted, still on ICS. i've tried the cyanogenmod 10.1.2, it works okey, but i get a distorted screen before the cyanogenmod animation appears.
how do we fix this?
do i need to flash a jb bootloader after flashing cyanogenmod based on jellybean? or can i just leave my ics bootloader untouched? will that solved issues about the bootscreen being distorted?
just a follow up, if i flash a jb bootloader, will that still work if i switch back to stock ics?
thanks
Click to expand...
Click to collapse
There is no bootloader in Samsung devices. I think your problem is kernel-related.
Sent from my GT-S7500 using xda app-developers app
thanks for the response.
so i can just use the cyanogenmod 10.1.2 without even flashing a jb bootloader?
mckoy_g said:
thanks for the response.
so i can just use the cyanogenmod 10.1.2 without even flashing a jb bootloader?
Click to expand...
Click to collapse
yes you can
daniel98 said:
yes you can
Click to expand...
Click to collapse
is there a "+ rep" button that i'm missing here? thanks for the response. i switched back to 10.1.2 and flashed gapps. everything is okey. the distorted screen just takes seconds and can be ignored.
thanks again.
I just flashed leak 3 on my A2 and installed BMM. I also installed a custom ROM on system3 but, when I try booting on it, it says CustomerID error. I backed up my CID before installing the ROM, should I restore it now?
Kraix said:
I just flashed leak 3 on my A2 and installed BMM. I also installed a custom ROM on system3 but, when I try booting on it, it says CustomerID error. I backed up my CID before installing the ROM, should I restore it now?
Click to expand...
Click to collapse
Yes just restore back your cid
Sent from my MB865 using xda app-developers app
jackall77 said:
Yes just restore back your cid
Click to expand...
Click to collapse
I restored it and I no longer get that error. Thanks for that. The custom rom still doesn't work tho. It just goes to a black screen. The ROM si mokee RC4. Any ideas why that might happen?
Kraix said:
I restored it and I no longer get that error. Thanks for that. The custom rom still doesn't work tho. It just goes to a black screen. The ROM si mokee RC4. Any ideas why that might happen?
Click to expand...
Click to collapse
Try mokee rc4 with jbx kernal..flash mokee rc4 then gapps lastly jbx kernal .. always read the op first.everyone can boot all rom nowday no issue on black screen now.
Sent from my MB865 using xda app-developers app
jackall77 said:
Try mokee rc4 with jbx kernal..flash mokee rc4 then gapps lastly jbx kernal .. always read the op first.everyone can boot all rom nowday no issue on black screen now.
Click to expand...
Click to collapse
You are officially awesome. Thank you very much.
My G2 broke last week and I am using this Galaxy S3 until my G2 gets repaired.
It is currently running a VERY old version of CyanogenMod - CM10.1 20130713 EXPERIMENTAL version and ClockworkMod Recovery V6.0.3.1 which I know is quite old version.
I was wondering what steps I need to take to get this phone running a 4.4.x ROM? What should I flash first? Also any recommendations on 4.4.x ROMs - AOSP vs. TouchWiz?
Thanks in advance.
Stigy said:
My G2 broke last week and I am using this Galaxy S3 until my G2 gets repaired.
It is currently running a VERY old version of CyanogenMod - CM10.1 20130713 EXPERIMENTAL version and ClockworkMod Recovery V6.0.3.1 which I know is quite old version.
I was wondering what steps I need to take to get this phone running a 4.4.x ROM? What should I flash first? Also any recommendations on 4.4.x ROMs - AOSP vs. TouchWiz?
Thanks in advance.
Click to expand...
Click to collapse
My recommendation would be to update ClockworkMod Recovery first. I think they're on to version 6.0.4.5 now, not sure though since I'm using TWRP instead.
In regards to choosing a ROM I think that depends on what you're into. Since you're already running CyanogenMod and you want 4.4 then you should probably take a look at CM11. I had mobile network/signal problems using the "Official" build so I'm using a Mastamoon unofficial build, it works great. Search for: cm-11-20140709-unofficial-mastamoon-d2lte.zip
CrustyMcLovin said:
My recommendation would be to update ClockworkMod Recovery first. I think they're on to version 6.0.4.5 now, not sure though since I'm using TWRP instead.
In regards to choosing a ROM I think that depends on what you're into. Since you're already running CyanogenMod and you want 4.4 then you should probably take a look at CM11. I had mobile network/signal problems using the "Official" build so I'm using a Mastamoon unofficial build, it works great. Search for: cm-11-20140709-unofficial-mastamoon-d2lte.zip
Click to expand...
Click to collapse
Do I need to flash anything before going to a CM11 ROM from CM10?
I see in a lot of ROM threads about locked bootloader or certain baseband, etc.
Any advice on that? Anything I should be weary about?
Stigy said:
Do I need to flash anything before going to a CM11 ROM from CM10?
I see in a lot of ROM threads about locked bootloader or certain baseband, etc.
Any advice on that? Anything I should be weary about?
Click to expand...
Click to collapse
Yeah you should probably upgrade to MF1. There is a link to it on the page for that particular ROM i had recommended. I don't think a locked bootloader will be an issue at this point since you've already got CM10 on there.
http://forum.xda-developers.com/showthread.php?t=2569769
Hi, I can't seem to play SimCity Buildit on my Tab 2 7.0 because it always FC's while loading. Even after the new update, its still happening and it works fine on my Nexus 5. Anyone else having the same problem?
Which rom are you using.
I believe I'm using OmniRom, not sure what build though.
Riqitch said:
I believe I'm using OmniRom, not sure what build though.
Click to expand...
Click to collapse
What android version are you on?
Try updating to Omni 5.1 If you are on Omni 5.0
Hassan 4 said:
What android version are you on?
Try updating to Omni 5.1 If you are on Omni 5.0
Click to expand...
Click to collapse
I updated to the new version at it worked... for a while until it FC'ed one day. I am currently trying to fix it by wiping the cache, reboots and maybe considering re flashing again.