Factory reset and flashed rom. I hang in the splash screen with it saying kernel is not seandroid enforcing and set warrant bit:kernel
I have also tried my backup and during flash tells me it failed.. Any help would be greatly. Appreciated as I have no phone.
Have you tried going to download mode and odin back to a stock tar rom?
Sent from my SM-G900P using XDA Free mobile app
zune70 said:
Have you tried going to download mode and odin back to a stock tar rom?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
i have not, i am new to samsung and odin. any way you could help me on this one?
awdlexusis said:
i have not, i am new to samsung and odin. any way you could help me on this one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2729617. follow the step 1 -5 really you need to download odin from the link and the stock ND2 file is on the bottom of the post. then you would Flash the stock Nd2 tar (put it in "AP/PDA" in Odin). Make sure you have all the Samsung drivers install on your computer. to get in download mod you would hole the power button, home button and the volume down button to enter download mode. A warning should popup and you would push volume up the continue to download mode. Hope this helps.
zune70 said:
http://forum.xda-developers.com/showthread.php?t=2729617. follow the step 1 -5 really you need to download odin from the link and the stock ND2 file is on the bottom of the post. then you would Flash the stock Nd2 tar (put it in "AP/PDA" in Odin). Make sure you have all the Samsung drivers install on your computer. to get in download mod you would hole the power button, home button and the volume down button to enter download mode. A warning should popup and you would push volume up the continue to download mode. Hope this helps.
Click to expand...
Click to collapse
Thank you so much for the help.I got my phone back to working now!!
Related
Hi, I was on CM9 ALPHA8 and I flashed with odin 1.85 and 3.04 the latest I9003XWLF2_I9003XXLE4_I9003ITVLF2_ stock rom used as PDA, but each time I pressed Start it was stuck in setup connection..., then I plugged battery off and now my phone doesn't boot up, and I can't go in recovery/download mode, anyone help ? I tried the trick pressing the hard-reset button behind the phone with a pin but no success, even tried by removing battery, pressing the buttons for download mode and put battery back in, all it did was windows looking for the omap3630 drivers .
Each time I remove battery and put battery back in (with usb plugged) I heard the windows sound.
Thanks for your help...
Make sure phone drivers are installed on ur pc.
Or either kies is installed.
Sent from my GT-I9003 using xda premium
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
chongns said:
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Can't flash anything without download mode...
adaba said:
Can't flash anything without download mode...
Click to expand...
Click to collapse
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
vishal24387 said:
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
Click to expand...
Click to collapse
I've flashed over 50 times and yes I know how to put it in download mode...
Anyone help?
jig usb its the solution force the download mode look in google
Hi, im new to xda as well as new to my android Galaxy SL I9003.
my phone is running on android 2.3.6.
Baseband version I9003JXKP3
Buildnumber GINGERBREAD.JPKPH
i want to upgrade my phone to the ICS alpha version and i have no idea where to start.
can someone please guide me step by step how to install it?
thanks in advance.
Root your phone use this http://forum.xda-developers.com/showthread.php?t=1351056 downlaod bagaria.tar then download now ICS alpha copy it in your sd card. After that Go to recovery mode, install zip then browse ICS rom.
to get into the recovery mood do i have to like install something? my phone is completely stock. i tried restarting it with the volume key up and power button but nothing happened.
enlighten me please.
Sent from my GT-I9003 using xda app-developers app
kithmal11 said:
to get into the recovery mood do i have to like install something? my phone is completely stock. i tried restarting it with the volume key up and power button but nothing happened.
enlighten me please.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
You need to use shortcut to go to download mode(Volume down + OK + Power) not recovery mode, as you're still on stock.
Then flash using ODIN.
IN the link i have given i think there is a turorial on how to flash bagaria.tar if none then go to download mode down volume power and menu HOLD THEM. Once in there, plug it in pc open Odin, Must see color yellow and word "added" in logview. Then clik PDA search bagaria.tar Once done you can now go to recovery mode w/ install zip.,.
I need some help with my galaxy tab 2 (p3113)!!
The tablet does not boot at all....it powers on and will only go to the odin download (while holding power and volume down).
It will not go to recovery AT ALL when I try holding power and volume up...just a black screen...no android icon or anything....tablet will ONLY go to odin download screen and nothing else.
I tried flashing stock rom with odin version 1.3 and 1.8 and 3....every single attempt at flashing stock rom fails...odin recognizes tablet plugged in (yellow box shows tablet plugged in) but flashing stock rom fails every time....tried flashing stock ICS and stock JB....nothing...cant get any recovery mode with power button and volume button pressed...
Any ideas???? Kies does not recognize tablet and neither does adb...reinstalled kies and drivers several times...no help
Now what????
Service center
Gesendet von meinem GT-P3110 mit Tapatalk 2
swedrows said:
I need some help with my galaxy tab 2 (p3113)!!
The tablet does not boot at all....it powers on and will only go to the odin download (while holding power and volume down).
It will not go to recovery AT ALL when I try holding power and volume up...just a black screen...no android icon or anything....tablet will ONLY go to odin download screen and nothing else.
I tried flashing stock rom with odin version 1.3 and 1.8 and 3....every single attempt at flashing stock rom fails...odin recognizes tablet plugged in (yellow box shows tablet plugged in) but flashing stock rom fails every time....tried flashing stock ICS and stock JB....nothing...cant get any recovery mode with power button and volume button pressed...
Any ideas???? Kies does not recognize tablet and neither does adb...reinstalled kies and drivers several times...no help
Now what????
Click to expand...
Click to collapse
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app
Droidlover123 said:
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
What pit files do I need and where do I get them? This will erase and partition the internal storage, right? Would that allow me to load a recovery afterwards?
Droidlover123 said:
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
What pit files do I need and where do I get them? This will erase and partition the internal storage, right? Would that allow me to load a recovery afterwards?
So I have a Tab 2 10.1 GT-P5113 that is more or less bricked. It won't allow me to boot in to the recovery in order to reset it. I've tried using Odin v3.07 to load Clockworkmod and the Stock rom that I found here...
http://forum.xda-developers.com/showthread.php?t=2420381
but Odin doesn't like Zip files.
I've tried the Vol - and power buttons and all I get is a black screen. Vol + and the power button get me the ODIN Mode. This was so easy to do on my GP5.0 but it at least had a working bootloader this thing is completely uncooperative. Please help.
Thanks,
TirrexFalcon said:
So I have a Tab 2 10.1 GT-P5113 that is more or less bricked. It won't allow me to boot in to the recovery in order to reset it. I've tried using Odin v3.07 to load Clockworkmod and the Stock rom that I found here...
http://forum.xda-developers.com/showthread.php?t=2420381
but Odin doesn't like Zip files.
I've tried the Vol - and power buttons and all I get is a black screen. Vol + and the power button get me the ODIN Mode. This was so easy to do on my GP5.0 but it at least had a working bootloader this thing is completely uncooperative. Please help.
Thanks,
Click to expand...
Click to collapse
Have you tried unzipping the stock ROM, then flashing the md5 through Odin? The md5 needs to be placed in the PDA, make sure repartition IS NOT checked.
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
TirrexFalcon said:
So I have a Tab 2 10.1 GT-P5113 that is more or less bricked. It won't allow me to boot in to the recovery in order to reset it. I've tried using Odin v3.07 to load Clockworkmod and the Stock rom that I found here...
http://forum.xda-developers.com/showthread.php?t=2420381
but Odin doesn't like Zip files.
I've tried the Vol - and power buttons and all I get is a black screen. Vol + and the power button get me the ODIN Mode. This was so easy to do on my GP5.0 but it at least had a working bootloader this thing is completely uncooperative. Please help.
Thanks,
Click to expand...
Click to collapse
So, now I I have a screen that says "Firmware upgrade encountered an issues. Please select recovery mode in Kies & try again" I would love to... if I could get to recovery.
njstein said:
Have you tried unzipping the stock ROM, then flashing the md5 through Odin? The md5 needs to be placed in the PDA, make sure repartition IS NOT checked.
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I unzipped the "shakatu_GT-P5113_4.2.2" file but I don't see an MD5 file. There is a boot.img but that is about it.
TirrexFalcon said:
I unzipped the "shakatu_GT-P5113_4.2.2" file but I don't see an MD5 file. There is a boot.img but that is about it.
Click to expand...
Click to collapse
So I would try and find the stock ROM from Samsung. The one in development, though it IS stock, isn't what you want to get it back up and running, you want the official Stock from Sammie. I would unbrick that sucker first, then go back and root, flash custom recovery, then ROM.
TirrexFalcon said:
So I have a Tab 2 10.1 GT-P5113 that is more or less bricked. It won't allow me to boot in to the recovery in order to reset it. I've tried using Odin v3.07 to load Clockworkmod and the Stock rom that I found here...
http://forum.xda-developers.com/showthread.php?t=2420381
but Odin doesn't like Zip files.
I've tried the Vol - and power buttons and all I get is a black screen. Vol + and the power button get me the ODIN Mode. This was so easy to do on my GP5.0 but it at least had a working bootloader this thing is completely uncooperative. Please help.
Thanks,
Click to expand...
Click to collapse
Perhaps you can find what you need here: http://samsung-updates.com/device/?id=GT-P5113
Is there a way to create a Boot SD Card and force the device to boot into a Recovery mode? CWM perhaps?
I need some help. I have been searching and trying everything i found but nothing seems to work. I have a 920i 5.0.2. I accidently installed the 920F 5.1.1 bootloader and modem. I am stuck on the samsung screen with "kernel seandroid enforcing." I am able to get back into download mode. Using odin, i tried to flash the stock 920i 5.0.2 and 5.1.1 firmware but neither are working. I tried installing the 920i 5.1.1 bootloader and modem via odin but no dice. An suggestion and advice would be greatly appreciated. Thanks in advance.
Try flashing stock firmware via Smart Switch.
1. Download Smart Switch.
2. Put your phone in download mode
3. Press "more"
4. Press "Emergency software recovery and initialization"
5. Device initialization
6. search for you device - i guess SM-G920i
7. Type in S/N number that was on the back of your phone.
8. Follow the steps and it should reinstall stock android for you.
Beware that your files and stuff will be gone.
I figured out, I was able to put my phone into recovery. I first had to go into download mode, but press cancel so it doesn't actually go into download mode, then quickly press/hold the buttons to go into recovery. I restored my backup from here.
Sent from my GT-N5110 using XDA Premium 4 mobile app
mtt311 said:
I figured out, I was able to put my phone into recovery. I first had to go into download mode, but press cancel so it doesn't actually go into download mode, then quickly press/hold the buttons to go into recovery. I restored my backup from here.
Sent from my GT-N5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you please provide a more detailed solution, please?
I am stuck at this all the time.
I did not use smart switch. My phone was stuck on the Samsung logo screen. Evenn though i tried to enter recover by pressing home+power+volume up, my phone would not go into recover. In order to enter recover, I first had to enter download mode but only as far as the warning screen. I canceled instead of entering download mode and quickly pressed volume up+home+power which allowed me to enter recovery. In recovery I was able to restore and flash as appropriate. This fixed my phone which was stucked on the Samsung logo. Hope this helps.