Database Info

[Q] Bricked phone

Hi, I was on CM9 ALPHA8 and I flashed with odin 1.85 and 3.04 the latest I9003XWLF2_I9003XXLE4_I9003ITVLF2_ stock rom used as PDA, but each time I pressed Start it was stuck in setup connection..., then I plugged battery off and now my phone doesn't boot up, and I can't go in recovery/download mode, anyone help ? I tried the trick pressing the hard-reset button behind the phone with a pin but no success, even tried by removing battery, pressing the buttons for download mode and put battery back in, all it did was windows looking for the omap3630 drivers .
Each time I remove battery and put battery back in (with usb plugged) I heard the windows sound.
Thanks for your help...

Make sure phone drivers are installed on ur pc.
Or either kies is installed.
Sent from my GT-I9003 using xda premium

Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2

chongns said:
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Can't flash anything without download mode...

adaba said:
Can't flash anything without download mode...
Click to expand...
Click to collapse
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.

vishal24387 said:
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
Click to expand...
Click to collapse
I've flashed over 50 times and yes I know how to put it in download mode...
Anyone help?

jig usb its the solution force the download mode look in google

Only Boots to CWM 5.5.0.4

I am new to the ROM scene. I recently tried to install the MIUI ROM, but the text messaging didn't work. So I tried to install another ROM (Dark Knight). Now my phone only boots to recovery mode. I have searched the internet for a solution, but cannot find one. Any help would be appreciated.

CheapCoffee said:
I am new to the ROM scene. I recently tried to install the MIUI ROM, but the text messaging didn't work. So I tried to install another ROM (Dark Knight). Now my phone only boots to recovery mode. I have searched the internet for a solution, but cannot find one. Any help would be appreciated.
Click to expand...
Click to collapse
That's a recovery bootloop caused by switching from MIUI to ICS, similar to switching from GB to ICS ..
Try this: http://forum.xda-developers.com/showpost.php?p=29028593&postcount=1
Here is the Infuse toolkit: http://forum.xda-developers.com/showthread.php?t=1702026
Good luck, let me know if that worked for you

CheapCoffee said:
I am new to the ROM scene. I recently tried to install the MIUI ROM, but the text messaging didn't work. So I tried to install another ROM (Dark Knight). Now my phone only boots to recovery mode. I have searched the internet for a solution, but cannot find one. Any help would be appreciated.
Click to expand...
Click to collapse
Return back to stock using this: Heimdall One-click Back-To-Stock UCLB3
then flash one of entropys daily drivers using the same method but with this: Entropy heimdal kernels/recovery (this will give you red cwm allowing you to flash roms...if you flash ics from this recovery you will need to do a double flash-flash like normal, then reboot back to recovery and flash again
both links are taking from this thread http://forum.xda-developers.com/showthread.php?t=1524081
How to get in download mode (needed to run the programs i linked):
1) remove battery
2) put battery back in
3) hold volume up+down simultaneously -but do not touch the power button...don't touch the power button, just don't do it lol
4) while holding both volume keys connect your phone to the computer using a usb data cable (like the one that came with the phone)
-you should now be in download mode or at a screen giving you the option to boot to download mode or reboot system

mg2195 said:
Return back to stock using this: Heimdall One-click Back-To-Stock UCLB3
then flash one of entropys daily drivers using the same method but with this: Entropy heimdal kernels/recovery (this will give you red cwm allowing you to flash roms...if you flash ics from this recovery you will need to do a double flash-flash like normal, then reboot back to recovery and flash again
both links are taking from this thread http://forum.xda-developers.com/showthread.php?t=1524081
How to get in download mode (needed to run the programs i linked):
1) remove battery
2) put battery back in
3) hold volume up+down simultaneously -but do not touch the power button...don't touch the power button, just don't do it lol
4) while holding both volume keys connect your phone to the computer using a usb data cable (like the one that came with the phone)
-you should now be in download mode or at a screen giving you the option to boot to download mode or reboot system
Click to expand...
Click to collapse
This worked!! Thanks to everyone that helped me!

yes
3

shak92 said:
yes
3
Click to expand...
Click to collapse
?
Sent from my HTC PH39100 using Tapatalk 2

URGENT HELP!! cant get into recovery...odin mode ok but all flashes fail

I need some help with my galaxy tab 2 (p3113)!!
The tablet does not boot at all....it powers on and will only go to the odin download (while holding power and volume down).
It will not go to recovery AT ALL when I try holding power and volume up...just a black screen...no android icon or anything....tablet will ONLY go to odin download screen and nothing else.
I tried flashing stock rom with odin version 1.3 and 1.8 and 3....every single attempt at flashing stock rom fails...odin recognizes tablet plugged in (yellow box shows tablet plugged in) but flashing stock rom fails every time....tried flashing stock ICS and stock JB....nothing...cant get any recovery mode with power button and volume button pressed...
Any ideas???? Kies does not recognize tablet and neither does adb...reinstalled kies and drivers several times...no help
Now what????

Service center
Gesendet von meinem GT-P3110 mit Tapatalk 2

swedrows said:
I need some help with my galaxy tab 2 (p3113)!!
The tablet does not boot at all....it powers on and will only go to the odin download (while holding power and volume down).
It will not go to recovery AT ALL when I try holding power and volume up...just a black screen...no android icon or anything....tablet will ONLY go to odin download screen and nothing else.
I tried flashing stock rom with odin version 1.3 and 1.8 and 3....every single attempt at flashing stock rom fails...odin recognizes tablet plugged in (yellow box shows tablet plugged in) but flashing stock rom fails every time....tried flashing stock ICS and stock JB....nothing...cant get any recovery mode with power button and volume button pressed...
Any ideas???? Kies does not recognize tablet and neither does adb...reinstalled kies and drivers several times...no help
Now what????
Click to expand...
Click to collapse
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app

Droidlover123 said:
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
What pit files do I need and where do I get them? This will erase and partition the internal storage, right? Would that allow me to load a recovery afterwards?

Droidlover123 said:
Bro try putting pit files on Odin!!!!.!.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
What pit files do I need and where do I get them? This will erase and partition the internal storage, right? Would that allow me to load a recovery afterwards?

[HOW TO ROOT] Samsung Galaxy SII Plus

Hello, I'm going to show You how to root your Samsung Galaxy SII Plus
*Including both variants of the phone*
So what you need ?
-Android Firmware version 4.2.2
-USB Cable
Odin (Flashing Tool) version:
-Odin 3.10.0 LINK : https://www.androidfilehost.com/?fid=95916177934547981
And also choose your CWM recovery:
-CWM Recovery GT-I9105P LINK : http://d-h.st/II4
-CWM Recovery GT-I9105 LINK : http://d-h.st/bq8
-Root Package LINK : http://download.chainfire.eu/396/SuperSU/
-Brain, and pair of eyes.
Click to expand...
Click to collapse
How to root your Samsung?
- Open Odin 3.10.0.exe
- Put your phone into 'Download Mode'
(Power button+Home button+Volume down button)
- Connect phone with your PC (USB Cable)
- When you enter in Download Mode, wait for your PC to install drivers
- Odin will mark your Box wih blue color and there should be something like COM:1 (Example)
- Uncheck Auto Reboot option
- Go to PDA (or AP) and find your recovery (Should be in Downloads, My Documents)
- After you checked everything click on Start (For finish it takes up to 20 seconds)
- When Odin says 'RES OK' take out battery, put it again and go to you Recovery
(Power button+Home button+Volume up button)
- Navigate with Volume Rockers (Volume Up-Volume Down)
- Select via Power Button
- Go to 'install zip from sdcard' (If your Root Package is in your Phone Memory/Downloads)
Or to 'install zip from sdcard/sdcard1' (If your Root Package is in your SD Card/Downloads)
- When you've found your Root Package select it via Power button, and install it
- Go back and select 'reboot system now'
Click to expand...
Click to collapse
Good job pal, you've rooted your Samsung !
Youtube Video
LINK : https://www.youtube.com/watch?v=RM7lxd7fDqk
Click to expand...
Click to collapse
If you brick your phone im not responsible.
Do at your own risk.
Click to expand...
Click to collapse

awesome sir :good:

noob question
Can I just install root update using stock recovery mode without installing CWM ?

You cant.
Sent from my GT-I9105P using XDA Premium 4 mobile app

Hi, is there any data loss with this procedure?
Does the CWM Recovery use any space on the device or card after?

Hi There,
It goes all well for these steps..
How to root ?
-Open Odin 3.07.exe
-Put your phone into Download Mod
(Power button-Home button-Volume down button,at same time)
-When you enter in Download Mod, you should get blue box on Odin 3.07
-Uncheck Auto Reboot option
-Go to PDA and find your recovery, then click on OK
-After you checked everything click on Start
-It should take around up to 30-40 seconds
- When its finished take out battery, put it again
but after putting battery back in.. i cant seem to get in CWM it just get stuck on Samsung Galaxy Screen where it shows model of the phone which is GT-I9105P. And after waiting for 5 min it automatically reboots and phone starts normal. And if i try to goto CWM it takes me to stock CWM.
Any help?
Thanks alot in advance.
Ali

Thanks, it work on stock odex 4.2.2 on my I9105P. Just see the instructions.

Thanks

@cefur23 really strange.. try holding those buttons like on video
Sent from my GT-I9300 using XDA Premium 4 mobile app

Thank you!!!

Hi, I have a problem now
i have done every step and before the final step (installing the zip file from the recovery)
When I open the recovery mode
It says no command and get me back to the official recovery mode
Can anyone help me please
And my phone is on the latest update of 2.4.4

It is 4.2.2 not 2.4.4
Well, try again recovery, of still doesnt work,try different one
Sent from my GT-I9105P using XDA Premium 4 mobile app

help me
For 4.2.2 i need to flash and install custom rom and download it from sammobile? Or no?
WITHOUT flash and rom my device being root?
My device is i9105p - build : JDQ39.i9105PXXUBNG1

I got the same Problem... after all steps, i got only the Stock Recovery. ???
On which Version must be the Phone for that, i need a "special" ROm before, maybe 4.1.2 ?
Thanks for help !

Hey guys!!!
My s2 is not connecting to Odin what can i do ???

jimisjordan said:
Hey guys!!!
My s2 is not connecting to Odin what can i do ???
Click to expand...
Click to collapse
Install Samsung USB Drivers.

I have heard CWM Recovery doesn't work well with phone...

[email protected] said:
I have heard CWM Recovery doesn't work well with phone...
Click to expand...
Click to collapse
You heard bad.

Thanks! But could you provide a guide to reverse this process? how to get the phone to the original state as it has been manufactured? Thanks a lot!

Selrond said:
Thanks! But could you provide a guide to reverse this process? how to get the phone to the original state as it has been manufactured? Thanks a lot!
Click to expand...
Click to collapse
Soon I should update thread with newer files, and that reversing, how you call it

stuck in splash screen.

Factory reset and flashed rom. I hang in the splash screen with it saying kernel is not seandroid enforcing and set warrant bit:kernel
I have also tried my backup and during flash tells me it failed.. Any help would be greatly. Appreciated as I have no phone.

Have you tried going to download mode and odin back to a stock tar rom?
Sent from my SM-G900P using XDA Free mobile app

zune70 said:
Have you tried going to download mode and odin back to a stock tar rom?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
i have not, i am new to samsung and odin. any way you could help me on this one?

awdlexusis said:
i have not, i am new to samsung and odin. any way you could help me on this one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2729617. follow the step 1 -5 really you need to download odin from the link and the stock ND2 file is on the bottom of the post. then you would Flash the stock Nd2 tar (put it in "AP/PDA" in Odin). Make sure you have all the Samsung drivers install on your computer. to get in download mod you would hole the power button, home button and the volume down button to enter download mode. A warning should popup and you would push volume up the continue to download mode. Hope this helps.

zune70 said:
http://forum.xda-developers.com/showthread.php?t=2729617. follow the step 1 -5 really you need to download odin from the link and the stock ND2 file is on the bottom of the post. then you would Flash the stock Nd2 tar (put it in "AP/PDA" in Odin). Make sure you have all the Samsung drivers install on your computer. to get in download mod you would hole the power button, home button and the volume down button to enter download mode. A warning should popup and you would push volume up the continue to download mode. Hope this helps.
Click to expand...
Click to collapse
Thank you so much for the help.I got my phone back to working now!!