after I use www.shuame.com software to get miui system in. it told me to get fastboot mode. but I cannot get that step.
now the phone is no charge and no power on.
When I connect the phone to a PC with Windows only recognizes QHSUSB_DLOAD no response from phone.
have any solution for my case?
help plz.
Greetings,
You have already been offered help in this thread no need for another thread.
http://forum.xda-developers.com/showthread.php?t=2752882
Thread closed.
Thank you,
BD619
Related
I've been trying to solve this for a while now and cant seem to get it to work.
I have adb and fastboot installed on the computer.
When I run the cmd window, I can get a recognition from adb when I'm in recovery mode, but as soon as I run <adb reboot bootloader> the phone goes into bootloader, disconnects temporarily from the computer and reconnects.
When I go into devices on the computer I can see that the computer see's it. It recognizes it as my HTC although it shouldn't right?
When I come back to my cmd window I try to run fastboot commands with no success. <fastboot devices> gives me a blank line and its ready for the next command.
I looked around and saw that a lot of people dint have the right cables, drivers for the phone or dint restart they're computer.
I have done it all. I re-downloaded the drivers I think 10 times in vane.
Any help would be appreciated thx
OS on phone is no longer there I lost it. dont know how.
OS on computer is windows 10 64 bit
pannic514 said:
I've been trying to solve this for a while now and cant seem to get it to work.
I have adb and fastboot installed on the computer.
When I run the cmd window, I can get a recognition from adb when I'm in recovery mode, but as soon as I run <adb reboot bootloader> the phone goes into bootloader, disconnects temporarily from the computer and reconnects.
When I go into devices on the computer I can see that the computer see's it. It recognizes it as my HTC although it shouldn't right?
When I come back to my cmd window I try to run fastboot commands with no success. <fastboot devices> gives me a blank line and its ready for the next command.
I looked around and saw that a lot of people dint have the right cables, drivers for the phone or dint restart they're computer.
I have done it all. I re-downloaded the drivers I think 10 times in vane.
Any help would be appreciated thx
OS on phone is no longer there I lost it. dont know how.
OS on computer is windows 10 64 bit
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the HTC One (M7) at http://forum.xda-developers.com/htc-one which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/htc-one/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.
I have a Xperia S running cm 12.1 with unlocked bootloaders TWRP installed and i tried to partition my SD card [http://forum.xda-developers.com/showthread.php?t=2584759] but clearly something went wrong and now the phone wont boot. I made a lot of research and tried everything but all the guides require to be able to boot into flashmode . My phone is dead the only sign of life is a red led when its charging which after some hours of charge will shut off. When the light is off and the phone connected on PC, the PC can recognize the device on unspecified devices (QHSUSB_DLOAD). i have installed all the needed drivers from Sony, google drivers from sdk, and adb drivers(adb wont see the device and i tried everything to do so, but nothing seem to work). I got a market for android on my pc called mobogenie that when i connect the phone it detects that a phone is connected but wont see what phone.The hardware reset buttons work but its useless in the current position. Concluding, the phone is bricked and wont open in fastboot-flashboot-bootloader-TWRP, its recognized as a device but not as "Xperia s" i got all the drivers and i want to flash the original firmware (already downloaded) to fix it. A possible problem is that the partition table is destroyed and after the flash it will hopefully be restored. The problem is not on the hardware but on software. I tried to trigger the download mode with the Samsung way (USB jig, 300k ohm ) but nothing happened as expected. Every solution i found required flash mode which is not accessible at the moment and i tried lots of things to go into fastboot(ever the rubber band trick,remove the battery etc). PLEASE help i dont know what to do, please help me flash it (i already got flashtool, Emma) or anohter solution. Thanks for the help in advance. (its my first thread in the forum, i hope to post it on the right section, i posted it here because i need the assistance of the developers i guess)
Hello,
Welcome to XDA.
The XDA Assist forum isn't what you think it is. We merely assist by helping to point users with issues in the right direction for their issue.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/xperia-s/help?nocache=1&z=2025285740382969
The experts there may be able to help.
Register an XDA account to post and reply in the forums.
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Maxim b said:
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Click to expand...
Click to collapse
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
Thanks!
I am trying to unlock my bootloader to rot my device. When i plug my usb in my phone and computer, it automatically recognizes it. After booting into fastmode, nothing. The computer says 'usb device not recognied' What can i do?
My computer has windows 10
Moderator Information,
Thread closed as duplicate. Note to @cuteyr if you have realised you have created the thread in the wrong forum, instead of posting a new thread, you can use the report button and the moderators can move it for you.
Many thanks,
Stephen
i was changing my rom to the stock rom yu5010a. my phone switched off and now it neither switch on nor opens the fastboot loader menu. it is not even charging. i connected my phone via USB with laptop but it is unrecognizable. it is not recognised by the laptop also. i've read articles about qualcomm 9800 mode and other articles too. but my phone is unrecognizable so i am unable to do anything. please help me. tell me in detail what to do to unbrick my phone
XDA Visitor said:
i was changing my rom to the stock rom yu5010a. my phone switched off and now it neither switch on nor opens the fastboot loader menu. it is not even charging. i connected my phone via USB with laptop but it is unrecognizable. it is not recognised by the laptop also. i've read articles about qualcomm 9800 mode and other articles too. but my phone is unrecognizable so i am unable to do anything. please help me. tell me in detail what to do to unbrick my phone
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
First, please register an account so you can post in our forums. After that, please have a look at the YUphoria homepage:
http://forum.xda-developers.com/yu-yuphoria
You can post our questions here:
http://forum.xda-developers.com/yu-yuphoria/help
Good luck and welcome to XDA!