Miui V5 on N900 (Let's start working on it!) - Galaxy Note 3 General

So Miui V5 released kitkat version of it's rom. I think there is nothing much left for us to not to try porting it. I'll give it a shot tomorrow =)

wow am I waiting for this rom,,,:laugh:
great job:good:

If you need a tester I will be
Sent from my SM-N900 using XDA Premium 4 mobile app

Wow and I was just about to ditch my N900
I hope this will be easy.I tried an MIUI port on the HOX+ but didn't succeeded

hope this is not another fake thread like one we had about 4k video recording, thanks for your efforts and hoping high for miui port :victory::highfive:

We don't even have CM rom. Is it possible to get MIUI?

phyowaiummg said:
We don't even have CM rom. Is it possible to get MIUI?
Click to expand...
Click to collapse
it is possible to use tw as base but i dont know if it will boot without modifying the kernel

I tried porting this all night. I followed MIUIs porting instructions by the letter but I do not get further than the bootlogo. Sadly I have no idea how to get a meaningful error message out of this. Any suggestions? (Or anyone wanting to team up on this?)

r4in34734 said:
I tried porting this all night. I followed MIUIs porting instructions by the letter but I do not get further than the bootlogo. Sadly I have no idea how to get a meaningful error message out of this. Any suggestions? (Or anyone wanting to team up on this?)
Click to expand...
Click to collapse
I'm going to try the instructions I just saw that they release kitkat version of miui for mi3 and I'll try it like I did on my old One X, try to port it on the samsung rom

Yes. When you try following their instructions you will get their bootlogo animation but then the device will be stuck there. As far as I understand it is not possible to get a logcat at this stage so I am out of ideas how to meaningfully debug this?

I'm trying to set the environment at the moment I'll give it a shot and what'd be the worst anyways? I'll get a boot loop

ereneren564 said:
I'm trying to set the environment at the moment I'll give it a shot and what'd be the worst anyways? I'll get a boot loop
Click to expand...
Click to collapse
Sounds good. Please keep the thread updated. Can't wait to try this if it works

ereneren564 said:
I'm trying to set the environment at the moment I'll give it a shot and what'd be the worst anyways? I'll get a boot loop
Click to expand...
Click to collapse
If MIUI booted up under N900, I will make my kernel dualboot support for it!

halaszk88 said:
If MIUI booted up under N900, I will make my kernel dualboot support for it!
Click to expand...
Click to collapse
wow. This would be amazing

You have earned my all support
Thats sound very well my friend..
Waiting for your test Rom unpatiently..

ereneren564 said:
So Miui V5 released kitkat version of it's rom. I think there is nothing much left for us to not to try porting it. I'll give it a shot tomorrow =)
Click to expand...
Click to collapse
Big fan of MIUI
Please make it work [emoji4]
Sent from my SM-N900 using Tapatalk

halaszk88 said:
If MIUI booted up under N900, I will make my kernel dualboot support for it!
Click to expand...
Click to collapse
We love you. Thanks.
Tapatalk
**NOTE 3 VN Rom V13.1 S5 TEMA*** OS 4.4.2 KitKat**
**NOTE 2 Zinse Rom V3.1 S5 TEMA*** OS 4.4.2.KitKat**
Android rom yükleme, root etme, recovery flaşlama, bootloader işlemleri
Samsung, HTC, LG, Sony ve MTK Replika cihazlar

I think it's very hard to port an MIU5 to the N900
You must see what is the MI3 processor if it is Exynos or not
To try to port it the way it is described the 2 bases should be very close
I wish you luck

Great news.
I wait this rom for a long time.
Thanks.

Any news?
Sent from my SM-N900 using XDA Premium 4 mobile app

Related

[REQUEST] Miui port

whats up guys..so now we have the car kernel thanks to Varun..appreciate ur work btw..I think devs can now start working on the Miui Roms..and why don't make it official we know that some developer are working with omni ROM secs so I hope somebody will be the xl maintainer in Miui..our device is worthy of having all good Roms..
Sent from my C2105 using XDA Premium 4 mobile app
man_77 said:
whats up guys..so now we have the car kernel thanks to Varun..appreciate ur work btw..I think devs can now start working on the Miui Roms..and why don't make it official we know that some developer are working with omni ROM secs so I hope somebody will be the xl maintainer in Miui..our device is worthy of having all good Roms..
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried to port the MIUI V6 from Nexus 5 rom but without success till this moment. It just get stuck on the boot screen. Will try to solve the issue and will share the update if I achieve any?
appreciate all efforts dude hope someone can help u..all I can give u is moral support which we need it for devs in this community
Sent from my C2105 using XDA Premium 4 mobile app
Would be great if someone could port MIUI for XL
utsavkoju said:
I have tried to port the MIUI V6 from Nexus 5 rom but without success till this moment. It just get stuck on the boot screen. Will try to solve the issue and will share the update if I achieve any?
Click to expand...
Click to collapse
man_77 said:
appreciate all efforts dude hope someone can help u..all I can give u is moral support which we need it for devs in this community
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kyasa85 said:
Would be great if someone could port MIUI for XL
Click to expand...
Click to collapse
You can not expect STABLE MIUI unless we have a full stable AOSP/CM
Once we have one stable ROM from any of above, I think we can have other ROMS as well. Also, the CAF kernel needs to be fully stable.
Once both of them are fixed, I am sure we will see some new roms at Xperia L forum
utsavkoju said:
I have tried to port the MIUI V6 from Nexus 5 rom but without success till this moment. It just get stuck on the boot screen. Will try to solve the issue and will share the update if I achieve any?
Click to expand...
Click to collapse
Can you try to port from another device which has same CPU, GPU and display (4"-4.5")?
FantasticalX said:
Can you try to port from another device which has same CPU, GPU and display (4"-4.5")?
Click to expand...
Click to collapse
I am trying to do that as it would be lot easier. But I don't see any other devices in which miui V6 is ported. Please share me the device name and link if you find any.
utsavkoju said:
I am trying to do that as it would be lot easier. But I don't see any other devices in which miui V6 is ported. Please share me the device name and link if you find any.
Click to expand...
Click to collapse
Nokia X?
Sent from my taoshan using Tapatalk
FantasticalX said:
Nokia X?
I didn't find miui rom for Nokia X. Would you please share me the link?
Click to expand...
Click to collapse
utsavkoju said:
FantasticalX said:
Nokia X?
I didn't find miui rom for Nokia X. Would you please share me the link?
Click to expand...
Click to collapse
Try LewaOS http://forum.xda-developers.com/showthread.php?t=2697520
Click to expand...
Click to collapse
utsavkoju said:
Try LewaOS http://forum.xda-developers.com/showthread.php?t=2697520
Click to expand...
Click to collapse
I prefer porting MIUI but will try to port Lewa OS in the mean time. Thanx for the link.
Though i doubt it will boot as its on android version 4.1.2.
utsavkoju said:
I prefer porting MIUI but will try to port Lewa OS in the mean time. Thanx for the link.
Though i doubt it will boot as its on android version 4.1.2.
Click to expand...
Click to collapse
Don't forget to replace our 4.1 kernel's BOOTCLASSPATH with LewaOS's bootclasspath (if available) to make it bootable :good:
What's up guys..is there any news about anyone working on miui..we now have official cm and omni..it's all good but i think miui is the most unique one it seems like a different os..hope that there is someone workin on it
Sent from my C2105 using XDA Premium 4 mobile app
man_77 said:
What's up guys..is there any news about anyone working on miui..we now have official cm and omni..it's all good but i think miui is the most unique one it seems like a different os..hope that there is someone workin on it
Sent from my C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Miui source code has been released on GitHub back in December, so it's definitely possible to port it. It's also KitKat based.
Send from my Viking War Schip
is there anyone working on miui port?
Sent from my C2105 using XDA Premium 4 mobile app
Port miuiv6 for xperia l
utsavkoju said:
I have tried to port the MIUI V6 from Nexus 5 rom but without success till this moment. It just get stuck on the boot screen. Will try to solve the issue and will share the update if I achieve any?
Click to expand...
Click to collapse
i'm too trying to build it from redmi 1s rom after completion i'm having build and update script and build prop of armani(redmi 1s ) i don't know why its building armani instead of taoshan .i have built the rom using android kitchen followed every step carefully .
i have selected taoshan zip first then redmi's rom which i was trying to port finally i'm finishing with armani build .

[dump]hia_aero_uhl_htc_europe_1.10.401.7

100% Pure SYSTEM IMAGEs
1.10.401.7Carrier: HTC Europe
Device: HIA_AERO_UHL
Model ID: 2PQ910000
Base Version:1.10.401.7 CL635503 release-keys
Android Version: Android Marshmallow 6.0 (MRA58K)
Sense Version: HTC Sense 7.0_GP
​ Download:
https://mega.nz/#!hRBxiagR!k_2H2eynRmV-n5Jjy511_dFsHLFLXExE9ODGP31ZbRY
This thread dedicated for ROM developers and advanced users. Feel free to use it for your purposes
Leave credits if you use it as a base for your custom ROM.
Wow, thanks for sharing!
We expect a port for m7? ?
I hope a port on Samsung Galaxy S5. Sense is the perfection, stop touchwiz
m8 is waiting !!!!
pasudag said:
We expect a port for m7?
Click to expand...
Click to collapse
A port for this phone would be awesome. I still believe this is the best phone HTC has ever produced. Perfect size, awesome speakers, great camera, nice display. Only thing it is missing is expandable storage (and a port of this rom )
thanks
ItsDon said:
A port for this phone would be awesome. I still believe this is the best phone HTC has ever produced. Perfect size, awesome speakers, great camera, nice display. Only thing it is missing is expandable storage (and a port of this rom )
Click to expand...
Click to collapse
A port is very possible. If you recall we(few members of skydragon) ported sense 7 of imgs. Downloading this now to see what we can come up with. I couldn't get a test device this time around so to OP really appreciate posting these!
Someone can deodex this rom ?
AndroGeek974 said:
Someone can deodex this rom ?
Click to expand...
Click to collapse
we are working on it as I type. I got boot.img modded and ready and system.img is unpacked into files. Final step is to deodex this.. Either manually or with a tool. Going to see what happens.
@Tigerstown Thanks for your answer, if you guys need help, i'm here.
The hype is real!
i will be donating for this
Thank you, we look forward to try it ..[emoji4]
Then don't buy Samsung LoL [emoji12]
Sent from my HTC One_M8 using Tapatalk
I was trying to deodex 32bit but some files are missing the and some are only 64bit. Is there another dump?
com.qti.dpmframework.jar-missing
dpmapi.jar-missing
ethernet-service.jar-64bit no 32bit
imscmlibrary.jar-missing
rcsimssettings.jar-missing
rcsservice.jar-missing
services.jar-64bit no 32bit
tcmclient.jar-missing
usbnet.jar-64bit no 32bit
wifi-service.jar-64bit no 32bit
chubbzlou said:
I was trying to deodex 32bit but some files are missing the and some are only 64bit. Is there another dump?
com.qti.dpmframework.jar-missing
dpmapi.jar-missing
ethernet-service.jar-64bit no 32bit
imscmlibrary.jar-missing
rcsimssettings.jar-missing
rcsservice.jar-missing
services.jar-64bit no 32bit
tcmclient.jar-missing
usbnet.jar-64bit no 32bit
wifi-service.jar-64bit no 32bit
Click to expand...
Click to collapse
Nope, these files aren't supposed to be there...
LlabTooFeR said:
Nope, these files aren't supposed to be there...
Click to expand...
Click to collapse
That sucks I guess it can't be ported to the m8.
chubbzlou said:
That sucks I guess it can't be ported to the m8.
Click to expand...
Click to collapse
Dam.....
^Yeah, HTC doesn't want you to keep using new Roms for their older phones so they can stay in business due to you buying a new phone once in a while..haha.

[JB][4.1.2] CyanogenMod 10 for S6310

IMPORTANT
I do not have a successful boot yet. Stay tuned for more updates!
Found a solid 4.1.2 base, will try porting it to CM10
Installation
Install TWRP
Wipe Data, System, Cache and Dalvik
Install CM zip
Install GApps
Reboot
XDA:DevDB Information
CM10 for S6310, ROM for the Samsung Galaxy Young S6310
Contributors
lesleyxxx15, PsychoGame
Source Code: https://github.com/CyanogenMod-S6310
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: None
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-01-21
Last Updated 2016-02-12
WoW it's nice to see that there is still developments for this phone...
Good work bro, I'm ready to test it on my S6312
Sent from my SM-G361H using Tapatalk
Mr said:
WoW it's nice to see that there is still developments for this phone...
Good work bro, I'm ready to test it on my S6312
Sent from my SM-G361H using Tapatalk
Click to expand...
Click to collapse
Seriously. It's meant for the single-sim variant of the galaxy young......It can be used by S6310/S6310L/S6310N(though nfc will not work). It may work but it's either only one sim card being read or no sim at all
Sent from my GT-S6310 using Tapatalk
jacobpayag said:
Seriously. It's meant for the single-sim variant of the galaxy young......It can be used by S6310/S6310L/S6310N(though nfc will not work). It may work but it's either only one sim card being read or no sim at all
Sent from my GT-S6310 using Tapatalk
Click to expand...
Click to collapse
Could try making a build for dual sim. But first a boot.
Speaking how's that boot doing
Sent from my GT-S6310 using Tapatalk
jacobpayag said:
Speaking how's that boot doing
Sent from my GT-S6310 using Tapatalk
Click to expand...
Click to collapse
Im working on it. I need to do some work on the init files.
wher is the rom ???
wher is the rom ???
zinou zizou said:
wher is the rom ???
Click to expand...
Click to collapse
It's in development, I just created a development thread already to let people know I'm working on it.
Any updates?
Raiyan862 said:
Any updates?
Click to expand...
Click to collapse
Well I have been trying to get all 3 displays working of my pc (grrrr Xorg) and I have done some work on rebuilding the source tree because it corrupted (just like my boot drive did and had to order new drive, reinstall Linux, etc.). I'm doing my best to get back to work ASAP.
Good luck , lesleyxxx15
something wrong
lesleyxxx15 said:
Well I have been trying to get all 3 displays working of my pc (grrrr Xorg) and I have done some work on rebuilding the source tree because it corrupted (just like my boot drive did and had to order new drive, reinstall Linux, etc.). I'm doing my best to get back to work ASAP.
Click to expand...
Click to collapse
i look in your device tree it seems like missing something
you should have a royss.mk
simokb1996 said:
i look in your device tree it seems like missing something
you should have a royss.mk
Click to expand...
Click to collapse
It's the default tree pulled from CAF.
Any updates ?
victoriordachi said:
Any updates ?
Click to expand...
Click to collapse
Nope, and there won't be many as I have to do work for school.
Bootloop
I now have proper display output but I have a bootloop, any help is appreciated.
Logcat
After the last line where it enters the loop adb doesn't work.
I guess it's an init problem..
lesleyxxx15 said:
I now have proper display output but I have a bootloop, any help is appreciated.
Logcat
After the last line where it enters the loop adb doesn't work.
I guess it's an init problem..
Click to expand...
Click to collapse
Definately an init file. Things were failing to start. Any how again, I don't have a laptop with me and I can't point out exactly what
Sent from my SM-T210 using Tapatalk
jacobpayag said:
Definately an init file. Things were failing to start. Any how again, I don't have a laptop with me and I can't point out exactly what
Sent from my SM-T210 using Tapatalk
Click to expand...
Click to collapse
Looks like it's the same problem NV-Dev had..
Maybe if I build for 10.1 it will work?
In my compilations he came to bootanimation and stayed there, and the ADB worked, but died of nowhere.
NV-Dev said:
In my compilations he came to bootanimation and stayed there, and the ADB worked, but died of nowhere.
Click to expand...
Click to collapse
Thats exactly what I have.
Edit:
Syncing 10.1 source

Request: may someone port NitrogenOS?

I'm having this on my Nexus4 and it's a great Nougat experience.
Unfortunately, i have zero knowledge on how to port this to OPO or any other device.
http://forum.xda-developers.com/nex...nitrogen-os-n-substratum-10-09-2016-t3459341/
Would help testing such ROM if a dev picks it up.
zagzag99 said:
I'm having this on my Nexus4 and it's a great Nougat experience.
Unfortunately, i have zero knowledge on how to port this to OPO or any other device.
http://forum.xda-developers.com/nex...nitrogen-os-n-substratum-10-09-2016-t3459341/
Would help testing such ROM if a dev picks it up.
Click to expand...
Click to collapse
it cannot be ported just aosp rom there are 7.0.0 rom for opo too
Dhairya said:
it cannot be ported just aosp rom there are 7.0.0 rom for opo too
Click to expand...
Click to collapse
Too bad, because it has a stable amount of customizations added to it.
zagzag99 said:
Too bad, because it has a stable amount of customizations added to it.
Click to expand...
Click to collapse
Well you tell me snapdragon s4 processor to 801 ? How that to 7.0
Dhairya said:
Well you tell me snapdragon s4 processor to 801 ? How that to 7.0
Click to expand...
Click to collapse
Obviously I'm not expecting one to one port of code.
But I'm guessing the NitrogenOS rom branches can be mixed with the OPO device branches so to make that rom ported.
Just like other ROMs, right?
Simply I never done that and none of the 'build yourself' guides i tried worked out for me.
zagzag99 said:
I'm having this on my Nexus4 and it's a great Nougat experience.
Unfortunately, i have zero knowledge on how to port this to OPO or any other device.
http://forum.xda-developers.com/nex...nitrogen-os-n-substratum-10-09-2016-t3459341/
Would help testing such ROM if a dev picks it up.
Click to expand...
Click to collapse
I'll try building it from source, should be easy enough lol
noahvt said:
I'll try building it from source, should be easy enough lol
Click to expand...
Click to collapse
With multirom supported script, please.
Bump.
Look they're already at 7.1
http://forum.xda-developers.com/nex...n-substratum-10-09-2016-t3459341/post69287502
No one with some experience can to try the build from source??
@noahvt, any progress?
zagzag99 said:
Bump.
Look they're already at 7.1
http://forum.xda-developers.com/nex...n-substratum-10-09-2016-t3459341/post69287502
No one with some experience can to try the build from source??
@noahvt, any progress?
Click to expand...
Click to collapse
I was able to build the rom for the one but it didn't boot (logcat said: "Slim services.jar not found") I contacted the dev but have not received a response yet. I will try syncing the 7.1 source to see if it works
noahvt said:
I was able to build the rom for the one but it didn't boot (logcat said: "Slim services.jar not found") I contacted the dev but have not received a response yet. I will try syncing the 7.1 source to see if it works
Click to expand...
Click to collapse
Thanks.
Would like very much to see the manifest and changes you've done to make it happen.
I tried some stuff myself but failed to get it to build for bacon.

ROM- Unofficial PACROM Marshmallow for Xperia Z3 Compact

PACROM MARSHMALLOW​
I am ready to help you fix your device incase something happens (Like losing recovery for example)
This is an unofficial port of PacRom for the z3 compact. The build is not tested and I am not responsible for anything that happens to your device. Your device is your, and only your responsibility
The bugs might be camera, build.prop and maybe even booting. This is a very early build and I am looking for testers who do not use their z3c as their daily driver. I am not able to test these builds due to my device being a daily driver. Please report any bugs that there may be.
The installation process is similar to that of any custom rom.
Use Gapps Pico, only if you want play store.
Installation:
1. Boot to TWRP3
2. Backup current rom
3. Wipe data/ factory reset.
4. Install pacromport.zip (Download)
5. Install opengapps arm pico (6.0)
6. Reboot and pray that it boots.
DO NOT USE WITH SIM !!! RIL not working, using sim might result in sim lock
Credits:
-PacRom Devs
-nelvinchi (XDA Dev- used his cm13 as base)
-GOD
I cannot guarantee that this rom works 100% or that it works at all. I'm asking for testers who can test this rom and tell me about any bugs. If it does not work, do not kill me. This rom was ported from hammerhead and I really doubt that it works. And do not try to install it on any other device, I have turned off assert, so it will not check what device you are using.
Has anyone tried yet? If you have, let me know please.
panzerox123 said:
Has anyone tried yet? If you have, let me know please.
Click to expand...
Click to collapse
I will try it soon.
king960 said:
I will try it soon.
Click to expand...
Click to collapse
Hopefully you don't use the phone as a daily driiver. I have really less hopes that the phone will bootup. And as a precaution, dont use the phone with a sim ok? Thanks!
Status error 7.
king960 said:
Status error 7.
Click to expand...
Click to collapse
Hmmm thanks for trying out. Build.prop problem.
king960 said:
Status error 7.
Click to expand...
Click to collapse
Iwill start from sratch again, but currently working on miui 8 port. It'll wake a week or two to get this working
oh nice! but for this device? and based on stock rom or not?
salva93 said:
oh nice! but for this device? and based on stock rom or not?
Click to expand...
Click to collapse
Not based on stock, but unfortunately not working now. You can try out my stock based aoxp rom
Link not working... "404 not found"
pickandrew said:
Link not working... "404 not found"
Click to expand...
Click to collapse
I know, I removed it myself. The rom is not working as of now, I mean there are a few incompatibilies. I will try to get it working in another 2 weeks
panzerox123 said:
Iwill start from sratch again, but currently working on miui 8 port. It'll wake a week or two to get this working
Click to expand...
Click to collapse
Porting KitKat based MIUI 8 for Z3C?
Cirra92 said:
Porting KitKat based MIUI 8 for Z3C?
Click to expand...
Click to collapse
I guess MM based. MIUI team has released patchrom for Marshmallow based MIUI 8
Patchroom here: https://github.com/MiCode/patchrom
king960 said:
I guess MM based. MIUI team has released patchrom for Marshmallow based MIUI 8
Patchroom here: https://github.com/MiCode/patchrom
Click to expand...
Click to collapse
Well that would be nice as well as camera mods could be applied, because stock Sony rom became boring and a bit annoying. High hopes for an updated MIUI rom anyway
Cirra92 said:
Porting KitKat based MIUI 8 for Z3C?
Click to expand...
Click to collapse
Marshmallow based
panzerox123 said:
Marshmallow based
Click to expand...
Click to collapse
Uuu nice, anxiously waiting for that one :fingers-crossed:
Cirra92 said:
Uuu nice, anxiously waiting for that one :fingers-crossed:
Click to expand...
Click to collapse
I've managed to port everything. But I want to port the ROM features to stock so I can make it available for LB and UB. But there is only so much I can do now.
panzerox123 said:
I've managed to port everything. But I want to port the ROM features to stock so I can make it available for LB and UB. But there is only so much I can do now.
Click to expand...
Click to collapse
Amazing stuff! I'm on UBL, so I'll surely flash it even if you release it for UBL only
Cirra92 said:
Amazing stuff! I'm on UBL, so I'll surely flash it even if you release it for UBL only
Click to expand...
Click to collapse
I'm almost done with UB. Not sure if it will work however, my ports have usually failed to even boot. That is the reason I am sticking with stock based rons

Categories

Resources