Related
I'm currently waiting for some new screen protectors to arrive BUT
I have an Invisible Shield Screen Protector sat here..
If I fit this is it easy enough to remove when the others arrive ?
Will it leave any marks or residue ?
Are they any good ?
Thanks
Well if you already have it you might as well use it. I find them a little difficult to fit, rather grippy for touch screen use and frankly they do mark up permanently, they are FAR from invisible or indestructible.
I didnt like mine, i actually removed it and fitted a cheap screen protector i got from eBay (6 for 1.99), and much prefer those.
So no issues removing it ? nor residue, gunk or mess ?
thanks
I would say no.
And no i had mine on for a week, no issue at all removing it, if anything it left my screen sparking clean.
I removed mine in favor of this one by FoneM8:
http://forum.xda-developers.com/showthread.php?t=676449
My invisibleShield had a lot of dust under it.
Removing it was painless and left no trace on the screen. I thought it would had been harder to get off but it was quite easy.
You just pull a corner and peel it back slowly.. Not any different from other screen protectors I guess.
I guess it depends on how careful that you are when you apply it. I took my time and used PLENTY of the supplied application fluid and it is great. Yes it is a little grippy, but grippy is better than slippery....?
I have also put a gel case on over my Desire (i have a proven record of putting my phone in the same pocket as my keys), and to date.....not a mark on the phone / screen.
Take your time applying it and use plenty of fluid is my advise
Thanks.
I'm waiting on my order from FoneM8 !
If they don't arrive today I use the Invisible shield and see how I get on.
As long as it won't mark or leave marks on the screen I may as well use it !
Thanks
i had the invisible Sheila, i removed and returned it for a full refund. it was just to restive for my liking but apart from that it was good.
my desire is now rocking the brando ultra clear, couldn't be happier
Currently go a cheap 5 for £2.90 from Amazon.. seems OK !
I had invisible shield fitted for about two weeks.
Removed it finally as I got too frustrated with it.
Fitting it wasn't exactly a doddle, even using plenty solution.
To get shot of bubbles I ended up marking the skin which didn't self heal as we've heard. That's not why I removed it though.
The skin is too sticky to use for touchscreen use.
I can see how it might be good for a laptop or something, but for smart touch screen phone? Nah - bad idea. I reckon it hot sticky climates, it will be even worse, as sweaty hands/fingers don't get on well with the invisible shield.
Personally I want to get my hands on a hard-ish type protector that has only slight give, so that the touch screen experience isn't flawed...
I said no!
I have a cheap 5 for 2.50 off eBay - after wasting 2 the third went on a treat, you'd never know it was there and no change to touchscreen at all
-------------------------------------
Sent via the XDA Tapatalk App
no don't use it.. i've had my on for bout 2 weeks now and its sucking alot of dust near the edges and what not so i'll be removing them when i'm back from holidays..
yes and no
From my experience of using on various devices and claiming multiple lifetime warranty and countless application, i feel that it's not great for the screen.
It feels "grippy" after applying which is not good when you try to slide your finger on the screen. On the hand on the back of devices it is perfect. It increases grip and prevent fall off from your hand when using one hand(especially people with smaller hands).
For screen, it impacts the clarity but not as bad as anti-glare(matte) screen protector, which I personally hate it. I only applied on the back, sides and button area.
The downside is it takes a lot of patience and time to apply the skin. I took 45 mins. But in the end the effect is simply stunning(if done correctly).
If you don't need the lifetime warranty then you can opt for http://www.bestskinsever.com/htc-desire-skin, USD 8. It's the same sans warranty.
You can check my picasa gallery here
For me it has to be a no, i prefer the HTC screen protector and leather case, i dont go throwing my phone around etc so it suits me fine. I rather than this than an invis shield around my phone but then again i do change my phone a few times each year.
The invis shield is really good but not for me.
Easy to remove, doesnt leave any mess on phone and nope i wouldnt recommend it i just think its stupid and doesnt feel right on the phone
Thanks for the comments.
I decided to wait until my cheap screen protectors arrived.
now fitted and feel good
Cheers
Ran across this today searching for cases for the Epic. Anyone using one? Its interesting in that it locks the slider during normal use and hinges open if you want to use the keyboard.
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001061&products_id=31414
Now this looks like quite a nice case for functionality.
Now if they just took off the whole part in the back for the clip and form fit the corners a bit more and offered it in more colors that'd be nice.
This may be the best thing I can do for now, I have been scouring for a jelly case to slip over the epic, since I never use the keyboard
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
bitbang3r said:
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
Click to expand...
Click to collapse
There are videos on you tube. The bottom looks like a very snug press fit. Top must be looser to allow for the hinge to work.
Sent from my SPH-D700 using Tapatalk
...
I had a similar case for my old HTC Titan. I LOVED it. Being a pretty serious phone abuser, that case kept my phone together!
-Rob
I used to have a similar case for my Treo and they are extremely well made. I irregularly dropped my phone from about 5 feet in the air onto hard linoleum and it never suffered any indignities. These come in both black and silver so if you want a different color you would want the silver so you could send it out to be powder coated.
I just ordered one.
Mine came last night.
The good: locks the slider firmly closed. No wobble or "play" at all when pressing the power button. Phone easy to remove (for GameGripper purposes).
The bad: Feels terrifyingly slippery compared to the Seidio ActiveX. Obstructs "slide down" gesture for notifications.
The seemingly fatal (a big one): my "back" fake hardkey keeps randomly going berserk... but ONLY that specific one. The foam in the top half seems to be confusing the capacitive sensor.
Sent from my SPH-D700 using XDA App
Update: I've had the 'search' fake hardkey freak out a few times on me, too.
Another problem: it's definitely affecting reception. 4G and GPS barely work with the case in place.
Sigh. So close. So agonizingly close. It's awesome to not have the phone shear and jiggle apart every time I hit the power button, and the fact that it allows the phone to be easily removed for the Game Gripper without really compromising the slide-out keyboard's usability is very cool.
I'm really convinced that this case went straight from plastic prototype to mass production before anyone actually tried to use it in an area with 4G service, high humidity (presumably what's screwing up the foam and touchscreen), and who didn't just assume that the GPS was dysfunctional because Samsung sucks.
Sigh. Too expensive to throw away, and really nice in ways that ultimately don't matter because the touchscreen-button problem makes it totally unusable
The plot thickens: more touchscreen observations:
* Oddly, there's NO FOAM around the lower part of the screen where the phantom-pressed fake hardkeys are.
* Last night, it went completely berserk with phantom button presses on cue when I rubbed the latch a certain way.
This suggests that the problem's root cause might extend to the electrical conductivity of the case itself. It's strange, because I wasn't able to find reports of the same problem for users of Monaco cases for other phones (like the Droid). Lots of complaints about signal attenuation, but no reports of touchscreen problems.
I'm seriously tempted to buy some liquid electrical tape and coat the inside of the lid to see whether it helps. The problem DOES seem to go away when the lid is no longer in contact with the screen. However, if it's happening because the sensor is acting kind of like a Hall Effect sensor and the case is acting like a Faraday cage, nothing short of making the case (or at least the top lid) out of plastic is likely to fix the problem. Still, it's worth a try since I really like the case itself, and my alternative is to basically chuck it.
Update: as an experiment, I wrapped black electrical tape around the bottom lip of the top part. It helped a lot. I think I might have also found a contributing cause: cat fur. I think wisps of cat fur might be bridging the metal case & screen and carrying static electricity to the sensor. Oddly, though, some of its *worst* back-arrow spasams have occurred with the phone laying on the desk, untouched, 3 feet away.
I'm still trying to think of a good way to plastic-coat the case without making it look bad & get a nice, even black rubbery coating on it.
Sent from my SPH-D700 using XDA App
How thin is it compared to the other plastic cases?
Very interested in getting the Monaco Aluminum Case, which is very similar to this one. My last concern, how thin is it compared to Seidio Innocase Surface?
Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....
I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.
It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star
Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta
The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?
Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star
Hello guys!
Has anyone tried this case?
http://www.ebay.com/itm/16130482774...arms=gh1g=I161304827748.N19.S2.M-37283.R3.TR3
No one?
Hi SERGIUHUSCA I have tried an OEM one and it works 100% I cant paste the link yet because of XDA policy.
And it works 100% with Samsung GS5.
Best Regards...
I bought http://www.ebay.co.uk/itm/171382082...49&var=470430675712&ssPageName=STRK:MEBIDX:IT
But the right-hand side doesn't fully click into place, so I'd be worried about it's water resistance.
I have the official samsung one and it sucks
I have bought nearly a month ago this Samsung EF-CG900BBEGWW S View Cover. In simple words, i am sure you can buy a better case.
This particular one doesn't close well in the front, so sometimes the screen goes on for excessive time. Furthermore, the acrylic window is very fragile and gets scratched easily.
The contact that makes the switch between the small (window) screen and full screen mode, which seems to be placed somewhere in the backpart of the case fails and once in a day i have to unattach and attach it back to get the function again.
Really, bad quality product, I frankly discourage anyone to buy it.
Yep I think all of the s-view covers are having issues with the front part not closing fully. Apparently it's due to lack of magnetism. Mine isn't scratching but I've only had it for 4 days. However, I'd expect it to scratch; and better that scratch than the phone itself, which is the main reason I have the case.
Don't buy this fake case!The case can brik your phone!
After i put the case on my phone in 30 minutes i feel a overheating on the phone!After that the phone doesn't recognize the sim card and reboot itself!Imediatly i take off the case ad everything came back to normal!
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine) from the link below. Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
<MODERATOR EDITED - SPAM REFERRAL LINKS DELETED>
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for two reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
rice923 said:
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Price: It's $10 on amazon. Not expensive, not cheap. Pretty normal pricing.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for three reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
3. I'm not a fan of the logo smack in the center of the back, especially when the original Nexus logo is obstructed. Considering there are three total logos/labels on the case, this one should've been omitted.
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
Click to expand...
Click to collapse
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Elnrik said:
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Click to expand...
Click to collapse
After I get my "x only" Dbrand skins, it should look more acceptable. I'm probably still gonna end up making a true bumper out of this down the road[emoji1]
Sent from my Nexus 6P using Tapatalk
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine). Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
I've been using this case for the past few days. I received the "updated" version that has the P above the fingerprint reader.
I enjoy the overall feel of the case. I like the ridges on the sides, it really allows you to get some grip on the phone, I feel less likely to drop it.
The buttons feel nice and click nicely, but because of the ridges I have a harder time finding them (and determining power from volume keys) when I'm not looking at the phone. I'm sure this will get easier over time.
I like the clear plastic on the back, I'm running mine stock without any skins, but it's still nice to see the faint nexus logo from the graphite version. As you mentioned that it felt like a snug fit, mine actually feels a little loose in some places, like the top and bottom.
The opening for the finger print reader is larger than the scanner, and I actually prefer this to one the same size as the reader. I feel like it's easier to find and unlock, and recognizes a little easier
Sent from my Nexus 6P using Tapatalk
heleos said:
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Absolutely fine by me! It's a review thread and you have some thoughts about the same product. All good
Sent from my Nexus 6P using Tapatalk
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
diomark said:
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Something sounds fishy about that. Never had that problem even once. Also, it takes a fair amount of effort and coincidence to butt dial on a 6p. Gotta press the power button, followed with a way to unlock the device, then precisely press the dialer icon, and choose someone to call. You may want to look into it a bit deeper. I've never butt dialed a single person since owning any smartphone in any configuration in the past 5 years.
Sent from my Nexus 6P using Tapatalk
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
diomark said:
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I see. Sounds like all the planets aligned. If you decide you still want to use the case, I would recommend actually shaving down the inside of the button (the side that physically touches the power button of the phone). That should cut back on the sensitivity, but it's effort that I don't know if you'd like to invest.
Design of the Poetic Affinity has changed
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Bhalraam32 said:
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Click to expand...
Click to collapse
Yep its nice. I still need to return my old ones.
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Lord. Tech said:
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Click to expand...
Click to collapse
It actually has good protection for as thin as it is due to the way its built. Very sturdy case.