I'm currently waiting for some new screen protectors to arrive BUT
I have an Invisible Shield Screen Protector sat here..
If I fit this is it easy enough to remove when the others arrive ?
Will it leave any marks or residue ?
Are they any good ?
Thanks
Well if you already have it you might as well use it. I find them a little difficult to fit, rather grippy for touch screen use and frankly they do mark up permanently, they are FAR from invisible or indestructible.
I didnt like mine, i actually removed it and fitted a cheap screen protector i got from eBay (6 for 1.99), and much prefer those.
So no issues removing it ? nor residue, gunk or mess ?
thanks
I would say no.
And no i had mine on for a week, no issue at all removing it, if anything it left my screen sparking clean.
I removed mine in favor of this one by FoneM8:
http://forum.xda-developers.com/showthread.php?t=676449
My invisibleShield had a lot of dust under it.
Removing it was painless and left no trace on the screen. I thought it would had been harder to get off but it was quite easy.
You just pull a corner and peel it back slowly.. Not any different from other screen protectors I guess.
I guess it depends on how careful that you are when you apply it. I took my time and used PLENTY of the supplied application fluid and it is great. Yes it is a little grippy, but grippy is better than slippery....?
I have also put a gel case on over my Desire (i have a proven record of putting my phone in the same pocket as my keys), and to date.....not a mark on the phone / screen.
Take your time applying it and use plenty of fluid is my advise
Thanks.
I'm waiting on my order from FoneM8 !
If they don't arrive today I use the Invisible shield and see how I get on.
As long as it won't mark or leave marks on the screen I may as well use it !
Thanks
i had the invisible Sheila, i removed and returned it for a full refund. it was just to restive for my liking but apart from that it was good.
my desire is now rocking the brando ultra clear, couldn't be happier
Currently go a cheap 5 for £2.90 from Amazon.. seems OK !
I had invisible shield fitted for about two weeks.
Removed it finally as I got too frustrated with it.
Fitting it wasn't exactly a doddle, even using plenty solution.
To get shot of bubbles I ended up marking the skin which didn't self heal as we've heard. That's not why I removed it though.
The skin is too sticky to use for touchscreen use.
I can see how it might be good for a laptop or something, but for smart touch screen phone? Nah - bad idea. I reckon it hot sticky climates, it will be even worse, as sweaty hands/fingers don't get on well with the invisible shield.
Personally I want to get my hands on a hard-ish type protector that has only slight give, so that the touch screen experience isn't flawed...
I said no!
I have a cheap 5 for 2.50 off eBay - after wasting 2 the third went on a treat, you'd never know it was there and no change to touchscreen at all
-------------------------------------
Sent via the XDA Tapatalk App
no don't use it.. i've had my on for bout 2 weeks now and its sucking alot of dust near the edges and what not so i'll be removing them when i'm back from holidays..
yes and no
From my experience of using on various devices and claiming multiple lifetime warranty and countless application, i feel that it's not great for the screen.
It feels "grippy" after applying which is not good when you try to slide your finger on the screen. On the hand on the back of devices it is perfect. It increases grip and prevent fall off from your hand when using one hand(especially people with smaller hands).
For screen, it impacts the clarity but not as bad as anti-glare(matte) screen protector, which I personally hate it. I only applied on the back, sides and button area.
The downside is it takes a lot of patience and time to apply the skin. I took 45 mins. But in the end the effect is simply stunning(if done correctly).
If you don't need the lifetime warranty then you can opt for http://www.bestskinsever.com/htc-desire-skin, USD 8. It's the same sans warranty.
You can check my picasa gallery here
For me it has to be a no, i prefer the HTC screen protector and leather case, i dont go throwing my phone around etc so it suits me fine. I rather than this than an invis shield around my phone but then again i do change my phone a few times each year.
The invis shield is really good but not for me.
Easy to remove, doesnt leave any mess on phone and nope i wouldnt recommend it i just think its stupid and doesnt feel right on the phone
Thanks for the comments.
I decided to wait until my cheap screen protectors arrived.
now fitted and feel good
Cheers
Related
Just wanted to let everyone know NOT to buy these screen protectors... I bought one for my XDA II about two weeks ago and it's real crap.
The visual quality is awesome, sylus is smooth; HOWEVER, the touch screen becomes really hard. You need to tap the screen hard before anything will happen. Also, if you get one spec of dust under the screen, that section of the protector will not stick to the screen and you'll get a big bubble.
Save your $15US
It is probably the placement of the protector thats causing the problem, I suggest you see how close to the edges it is sitting, even a tiny part of the protector tucked under the edge can stop the screen working completely, I have heard nothing but good about this brand.
It's on there perfectly...
I had a G2 lying around for the Siemens SX56 and thought I would give that a try and see if it's any better. I installed it and it was a little too small (tuck wise), so it would move around slightly if you are playing games. I just put a drop of Super Glue in two corners (clean job) and it's perfect.
Awesome considering I only paid $14US for 2!
I have had no problems with the martin fields screen protector. I've tried to order a G2 screen protector a long time ago - waited two weeks and order never came, so I went with the martin fields. To get a real clean job, its good to have a piece of tape lying around - or use one of those Post it flags to remove the dust on the screen or the screen protector.
And putting superglue on your XDA II is insane. I highly recommend not to if you lack great hand dexterity. *imagines self* :roll:
I think it totally depends which you get... G2 doesn't "really" support the XDA II.
haha, yes yes... I used a small needle and everything. YOU DON'T WANT TOO MUCH GLUE, JUST A DROP TO HOLD IT DOWN. remember, you want to remove it later!
Superglue on your touchscreen??? :shock:
I bought MF and I don't have too much problem - other than my clumsy hands.
The tapping hard is not experienced as said here, but compared to without the screen protector (any one, not necessary MF), you need to tap harder & write harder. :roll:
As for taking the protector out and the dust, I learned the hard way -- use scotchtape to stick up the protector, use the scotchtape to stick off the dust, & don't use water or thinner to clean the sticky side -- use the scotchtape and gently peck on the sticky side. :wink:
cheers
I had the WRITEShield before the MFO's, and although they were great, the MFO's are heaps better. I have to say, I find the required touch to be much lighter than the WS's.
Many of the forum users over at MTekk love them too, infact this is the first complaint.
Hope you get your problems sorted...
Dave
I've no problems so far with MF.
No hard touch screen problem...infact its same as before putting on the protector.
The MF is cool....only minor comment is it will get scratch after a while of intense gaming or writing. Comparable with G2s.
The PDA shop recommend me to change it after 6~8 months....depending on the scratch surface.
So far I've not encountered a clear type Screen protector that doesn't scratch.
The ones from Brando Brand are Matt finished but will last forever without a scratch on it.
I let the shop assistant (actually, he is the boss!) fixed the thing for me and it looked like a tedious task to get a perfect job. The screen need to be cleaned, apply it slowly from the top side and if there is a dust spot, remove with cellotape. I couldn't have done a better job than him!
hmm, that's really weird. I have to tap it at least twice as hard on the edges and three times in the center.
At first I thought my LCD was dead, but I removed the protector and the touch does work awesome.
No problems here either. I've been using MF on all my phones, SE P800/900 and now my Qtek 2020. Also tried Brando's protector but it's not too bright, so prefere the MF.
Don't get me wrong, I love the visual quality, but can't stand the touch of it.
So far, the two I have tried to get on my Herald (wing), either somehow end up with a piece of dust behind them, or end up with a damn bubble. And now I'm outta them ($20 for a pack, $20 I now don't have). EDIT: Not to mention, I cant seem to cut the right effing amount, so it either folds around one or doesn't cover the other...POS
Are they REALLY that helpful, or is this just a false sense of hope?
Damn, why cant they just make an EASY screen protector for our devices?
Just hang in there. They are helpful.
Why don't you buy those ready made for your device, so you don't have to cut it. Try Martin Fields or Brando Workshop. I prefer Brando's Transparent screen protectors.
---
hkbladelawhk said:
So far, the two I have tried to get on my Herald (wing), either somehow end up with a piece of dust behind them, or end up with a damn bubble. And now I'm outta them ($20 for a pack, $20 I now don't have). EDIT: Not to mention, I cant seem to cut the right effing amount, so it either folds around one or doesn't cover the other...POS
Are they REALLY that helpful, or is this just a false sense of hope?
Damn, why cant they just make an EASY screen protector for our devices?
Click to expand...
Click to collapse
oh my.. i can't stress enough how important these babies are!
i can even say that HTC and all OEM companies should ship their new touch screen phones with them!
i suggest buy ready made/fit for your device, make sure they're of high quality ... being thrifty on these can cost you more in the long run..
i used capdase on my Himalaya.. changed it only after 1.5years of everyday use.. when i took it off, touchscreen remained scratchless! then got another one on it right now! good as new! (esp with it's new wm6 heart! )
go get them on your toy.. if you can't do it on your own(like me!), have the store personnel do it for you...
the one that came with the phone is too small. i ordered one from shieldzone. the invisibleshield is an amazing product, i have used them before and they have a lifetime warranty.
I completely agree that screen protectors are a absolute pain to install and degrade the viewing in many situations. Yet for some reason, I continue to use them. Go figure!
What they really do is offer some protection to the screen. Sometimes I would like to take the risk and go without.
Martin Shield ..
I used it for my old Magician ... and now Kaiser (warning you must cut it a little bit).
But it is very easy to put and perfect ... no bubbles.
Tried brando, and got bubbles.
People also said about WriteShield ... havent used that one.
well, you must prepare before put the protector
- wipe clean the table
- enough light (a lot!)
- wash your hand
- DONT BREATHE
and pray
I have always used Martin Fields, no problems at all.
" should ship their new touch screen phones with them!"
if they did it would prob not be the top notch quality ones
My Kaiser came with a screen protector in the box... No alcohol wipe or cardboard bubble remover though.
I don't know how many of you are aware of this... www.bestskinsever.com
vp3G was kind enough to mention it to me. I've used all kinds of screen protectors and this is fantastic. Though they have ready made ones available for most HTC devices, I would suggest looking at the DIY protector. It's extremely easy to cut and apply. The best part is you can cut it a little bigger than the actualy visible portion of the screen. That way you can slide a tiny part of it under the edges of the outer frame of the phone. This way you can enusre that there is no damage at the edges of screen due to dust accumulation. Most ready made screen protectors tend to not cover the edges perfectly. By doing it yourself you can get it perfectly right.
The best part about the protectors from bestskinsever other than the price is that it does not have any adhesive. Instead you have to use soap solution to be able to stick it onto the screen. The great part about that is you can't get any fingerprints on it before you apply it to the screen. If you mess up.... just reimmerse it into the soap solution and reapply.
It's great... and thanks again vp3G.
its a good choice to get the dual layered ones which are very hard to mess up. Since they are hard they don't allow bubbles to form. Also if you know how to open up your phone you can put the screen protector right on the screen and underneath the edges (no more lint or loose tobacco under the screen) which makes it that much better
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Every gadget owner loves their devices be it Cell Phones, Laptops, GPS, Gaming Consoles, etc. and would never want our devices to get scratchy, dirtily, peel off or loose their color and shine. For this some of us freaks keep cleaning out devices or cover them with cheap looking low quality plastic guard just to see it getting peeled off soon and getting all scratches just to buy another one in few weeks. This is because many of us are unaware of some of the finest Body Scratch Guards which themselves can never attain a scratch.
Yes, that’s true and this article is about Top 4 Body Guards covering not just the screen but the complete body of your device, that I came across. I’ll just be giving my honest reviews about all four of them and leave the rest on you to decide which you prefer.
you can find the comparison here:
http://winmo.techparaiso.com/best-s...isible-shields-vs-ghost-armor-vs-body-guardz/
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
band27 said:
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
Click to expand...
Click to collapse
i would still like to see some screenshots of bestskinsever for diamond as nothing is available anywhere.
want the best protector? Buy a psp HORI Protector, cut to size. 100% invisible and only a knife will scratch it. 2 for .99 on ebay
I'd also love to hear people experience with Best Skins Ever. I'm a sucker and always buy the zagg.com stuff, price = quality after all... but would be willing to grab a BSE skin based on peoples reviews, as the markup on zagg.com is ridiculous.
One thing, I dislike with the zagg.com skins is, after a while the protector appears as if it has a gasoline like stain in the middle of it, symmetrical to about half an inch away from the edge of the screen on all sides. So basically a mini rectangle on the inner portion of the display. Any else experience this? and does the BSE have this tendency?
P.S. Don't forget BodyGuardz
I've been using Invisible shield by Zagg since I bought my Diamond and I completly agree with Lokosis. I also feel the corners are becoming a bit rough, it looks like someone can just pull it off.
* Doesn't fit into my HTC pouch anymore (see picture attached).
* Attracts a lot of dust.
* Don't need a bulky case anymore.
* Gives the back cover a shiny effect.
well yesterday i received my best skins for diamond. i must say delivery was really fast but a little disappointed. i'll tell you why later.
also i'll be posting the pics of my diamond soon.
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
AdamHC said:
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
Click to expand...
Click to collapse
nothing to wory dude. even i first bought IS and den after an hour got to know about BSE so i ordered that too. i'd a talk with IS ppl and they say that when i receive the item, then i should take out the screen guard, put it in envelope and send it back to there address. thats it. they said they dont need the box of spray or anything. just the invisible shield in an envelope. and as soon as they receive it, they'll refund you the money. sending it back in envelope is much cheeper and you save alot. so order BSE now and wait for IS to arrive and send it back
invisible? are you blind?
Well, it's a good screen protector, but it's definitely not invisible...
Are you blind guys?
I just got the screen one and not the whole case skin because I own an o2 Ignito which has a lovely-grippy-rubber-feeling-matt-black back cover, although it is not as sexy as the standard Diamond my wife has.
I was honestly quite disappointed because it is expensive and honestly looks crap compared to cheaper alternatives.
Have you ever tried Vikuiti by 3M guys?
I have it on my Orbit (it's a PSP screen protector, I opened the Orbit and cut the film on the proper size of the display, once re-assembled you can't see any edge at all) it's impossible to leave fingerprints and it is anti-reflection.
The Diamond one is gloss finishing instead, it costs € 8 on eBay (german seller but ships worldwide)
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
AdamHC said:
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
Click to expand...
Click to collapse
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
sunnyin86 said:
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
Click to expand...
Click to collapse
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
AdamHC said:
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
Click to expand...
Click to collapse
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
sunnyin86 said:
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
Click to expand...
Click to collapse
In that case I think I might buy one of the BSE. I think that trying to protect the sides is simply too much effort and is tedious. Besides that, the sides are fairly scratch resistant and you can't even see those scratches if them do occur without having to look for them anyway. I really think IS should have skipped trying to protect them or made a second piece to go around the outside.
both are sam so betteer to opt for bse. am loving it.
more pros n cons on bse please......
i found that they didn't provide spray bottle....
mygreatdiamond said:
more pros n cons on bse please......
i found that they didn't provide spray bottle....
Click to expand...
Click to collapse
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
BodyGuardz vs BestSkinsEver
Hello,
Here is my experience. I had a InvisibleSHIELD on my iPod Classic and it was great so I was considering buying one but after reading some of the the feed back it seemed that the product was good but the fit for our diamonds and even the iPhone (which i am now looking for) was not great.
I then heard about BestSkinsEver and because it was so cheap decided to go ahead and try it. I got it over 2 months ago and when I received it I applied it immediately. I have done a few of these so and since I am some what of a perfectionist I applied it to the best I could. It looked OK but after a few weeks the corners started peeling. Also due to the way the backing is placed it puts stress in areas which causes other areas to lift off (this is mostly on the corners). I ended up using a nail clipper to start clipping areas that were peeling off. After about 2 months it started to peal even more so I decided to go back to the reviews and see what was available. After doing some research I decided to go with the 12 piece BodyGuardz. It came in a set of 2 which is nice when i transfer the phone to my wife.
So all of this is to tell you that my first impressions of the BodyGuardz is well as good as I felt when I put the InvisibleSHIELD on my first iPod Classic. For me it did take a while (about 2-3 hours) to apply. This was not done in one sitting but instead because it was a 12 piece I applied each piece with 10 minute intervals allowing for tackiness to set in and so it would be easier to handle as I continued with the many pieces. First major thing I noticed and was really happy about was the BodyGuardz stickiness was considerably more than the BestSkinsEver. It stuck to the corners almost right away. Although throughout the process I did press down on the corners it was quite a bit easier as the BestSkinsEver did not have good stickiness. Also on a side note when i removed the BestSkinsEver it came of like a sticker which i know from my previous iPod is not normal and it usually takes a lot more effort to get it off carefully. Overall I am very happy at my first impressions of the BodyGuardz and the quality of the material seems to be better than the BestSkinsEver. Not to mention the 12 piece may seem like a lot of work but having individual pieces allows for no stress on the film in weird areas allowing it to sit flat with no parts lifting off (so far, i'll update in a month or two). Which is not the same case for the BestSkinsEver and from what I hear the InvisibleSHIELD. Newayz I hope this review helps someone.
Justin
Mr. Makk said:
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
Click to expand...
Click to collapse
I never sprayed the device only the shield itself. I would not recommend spraying the device. That said I do like the spray on the shield as it is a bit more even but you can use any spray bottle. I got one with Bodyguardz but there was not enough fluid in it so i had to fill it up with my own solution newayz.
Which will be the best screen protector? Which is the best based off your past experiences?
I am in the UK and willing to order from the US but I'm not sure which is the best. I still need to sell my unused XO from my Galaxy Nexus
UK here too. I've tried Zagg, Skinomi and BSE in the past. BSE are undoubtedly the best of those 3
I'm having trouble deciding on a screen protector as well, but I've always gotten the InvisibleSHIELD. I mostly do so because I can buy the full body skin (or any of the kits they sell), then take it to the mall and they'll apply it all free of charge. If they screw up (they never do), then they'll give me a brand new one. If it gets all scratched up, gets a bubble, or ANYTHING, I just take it to the mall (without a receipt or box or anything) and they'll replace it all totally free. If I screw up applying other protectors, I don't want to have to ship it back and wait for a new one. While others do sometimes have kiosks (from what I've heard), I have yet to actually see one. I've never minded the whole orange peel thing personally, so it doesn't really affect my decision by much. I just love their warranty in combination with the kiosks. It makes it very easy.
Another thing I'm worried about is this: If I get the full body kit, can I still use a case, or will the friction of putting the case on be enough to screw it up? Has anyone had this issue? Should I just get a front and back kit instead? I plan on using case with the phone to protect from drops and what not, I usually just get a Speck Candy Shell or something, although I'm a huge fan of the LifeProof cases since they look good and offer great protection (either or not they'll make a Nexus 4 case is a different story, I suppose).
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
How is the touch feeling of BSE ? Similar to glass or sticky like Zagg ?
They are all very similar. I usually go with Skinomi because of the price. I already pre-ordered it off Amazon.
I love XO skins. I just ordered one for the Nexus 4.
Sent from my GSM Galaxy Nexus using Tapatalk 2
sgp steinheil is the best it feels smooth like its not there but is extremly hard my nexus s has deep scratches on the screen protector that havent even touched the glass
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Well I don't know what kind of screen protectors you've been using but the ones I've used don't have any effect on the sensitivity of the touchscreen. I am careful with my stuff anyway but the small hairline scratches really annoy/bother me for some reason.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
Protection is absolutely necessary for me since I work in construction/maintenance
I personally love steinheil! ( SGP )
I'm going for Ghost Armor actually.
Your question is the best for the N4. But nobody has any of these screen protectors made for the N4, and only a couple really lucky people have the phone. None of the opinions in your poll are actually based on experience with this device and this protector. Wait until people start getting them and then look at reviews.
chrisjcks said:
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
where you order it??? Icant decide
I'm going with BSE because I've heard a lot of good things about them. Plus I like the wet apply idea. I've ALWAYS had problems with the sticky dry screen protectors. One little piece of fuzz or dust and you have annoying bubbles every where. And over time bits of fuzz/lint get up around the corners and it slowly starts to peel off.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
I'm sorry, but it doesn't matter what you do. Before you know it you'll be in direct sunlight and you'll see all sorts of small little scratches. Then later, you'll always know they're there. I'm OCD about it. I can't stand having the tiny little scratches because I want my phone to stay new. I think the first time you put a phone in your pocket, it gets some sort of tiny little scratch from something.. then over time they build up and make the screen look aweful. Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
XO Skins are the ones I have been using for a few years now. From what I have read xo and sgp are the only ones without orange peel. I don't know how the sgp do on curves though I posted a review of xo in my signature when I had the samsung google nexus
BravoMotorola said:
Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
Click to expand...
Click to collapse
Exactly, all these videos of people dropping coins/keys on the phone are pointless. swipe over that phone just once with sand paper and its all over...
Emama said:
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
Click to expand...
Click to collapse
Me too. I ordered some of these:
http://www.protectionfilms24.com/article/vikuiti-adqc27-screen-protector-google-nexus-4-126198.html
They were great on my G2 but it has a flat screen. I'll let people know after I get them. I will be disappointed if they don't properly stay on the screen.
What is this "Orange peel" that people are referring to?