[Q] Rooting gt-900F - General Questions and Answers

Hi,
I tried rooting my galaxy S5 using CF-Auto Root by ChainFire. But I get the following error in Odin and my phone doesn't get rooted. Can anyone help me, please?
This is the message I get from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)

jocooljocool said:
Hi,
I tried rooting my galaxy S5 using CF-Auto Root by ChainFire. But I get the following error in Odin and my phone doesn't get rooted. Can anyone help me, please?
This is the message I get from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Shows NO error .... Did you even press "start" ?
Uninstall Samsung KIES before using ODIN

LS.xD said:
Shows NO error .... Did you even press "start" ?
Uninstall Samsung KIES before using ODIN
Click to expand...
Click to collapse
HI,
I pressed start. Have tried a few times already. I don't have Samsung kies installed. I'll try on another pc and see.

jocooljocool said:
HI,
I pressed start. Have tried a few times already. I don't have Samsung kies installed. I'll try on another pc and see.
Click to expand...
Click to collapse
Are you using the latest ODIN version?

I'm using 3.07 version . It was together in the zip file. Just tried in a different pc. Same results.
Sent from my SM-G900F using XDA Free mobile app

jocooljocool said:
I'm using 3.07 version . It was together in the zip file. Just tried in a different pc. Same results.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Latest Odin --> LINK

Managed to root my phone. My computer was blocking the Samsung phone drivers from being installed. That was the problem.
Sent from my SM-G900F using XDA Free mobile app

Related

[Q] Is anyone out there...I am finally in download mode...what now?

So I have been trying for hours to get into download mode...and I am in. Before I was getting the repeating galaxy s 4g screen and then nothing. Well I tried to flash kc1 (hawk.zip) and this is what it said.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T959VUVKG4_CL385158_REV00_user_low_noship.tar.md5 is valid.
<OSM> T959VUVKG4-Phone-CL1037720.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is still in download mode and I am afraid to unplug it because it will take forever to get into it again! what can i do???? please help!
press the reset button on odin and download the KC1 deodexed file from whitehawkx and odin that then just odin back to your desired odin rom
Try downloading this and Odining:
http://forum.xda-developers.com/showthread.php?t=1193751
pammie, one last thing to try if you are going to gb:
http://forum.xda-developers.com/showthread.php?t=1217491

Stuck in Recovery

I have flashed the EE4 and the ED2 files with the PIT via Odin. I have all the drivers installed, everything works 100%.
No matter what I do, I cannot get back to stock.
It keeps going to recovery.
If I install one of those md5 files, I get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CI510_VZW_ED2_ALL_ONE-LTE-CP_REV03_user_CL986330.tar.md5 is invalid.
<OSM> End...
<ID:0/005> Removed!!
Please help me. It seems like I've tried everything in the book.
CCRAZEDD said:
I have flashed the EE4 and the ED2 files with the PIT via Odin. I have all the drivers installed, everything works 100%.
No matter what I do, I cannot get back to stock.
It keeps going to recovery.
If I install one of those md5 files, I get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CI510_VZW_ED2_ALL_ONE-LTE-CP_REV03_user_CL986330.tar.md5 is invalid.
<OSM> End...
<ID:0/005> Removed!!
Please help me. It seems like I've tried everything in the book.
Click to expand...
Click to collapse
flash cwm with odin then flash the stock cwm install file
Sent from my Galaxy Nexus using xda premium
ztkryan said:
flash cwm with odin then flash the stock cwm install file
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
If you wouldn't mind giving me a detailed walkthrough, along with links, I would appreciate it so much. thank you very much.
CCRAZEDD said:
<OSM> MD5 hash value is invalid
<OSM> CI510_VZW_ED2_ALL_ONE-LTE-CP_REV03_user_CL986330.tar.md5 is invalid.
Click to expand...
Click to collapse
I would re-download the stock odin file. It looks like you have a bad download.

help no one can solve this issue??!

My phone just boots to the "Saumsung Galaxy Note II" screen and it is stuck there. I dont think its a loop because it doesnt loop (by that I mean it doesnt disappear and appear).
I m afraid using odin would erase everything.
I want to save my data, what should I do? Which rom do i use?
I tried downloading 3 to 4 note 2 roms but they all failed in odin.
Please specify what I need to download in order to save my data.
At this point, I am also ready to just give up and restore factory settings. I went to the at&t technicans, who are completely useless and they used their roms and couldnt help at all. I went to a fix phone place and they couldnt do anything either.
Please help!
Ummmm do you know that you posted this in the s6 forum and not the note 2?
Sent from my SM-G920V using Tapatalk
i know but no one is capable of answering there.
Flash the stock Note 2 firmware on your phone via Odin. It should restore it to normal. Below are the stock firmware from Sammobile. Just pick the one from your country.
http://www.sammobile.com/firmwares/database/GT-N7100/
i tried the US version first.
http://www.sammobile.com/firmwares/confirm/13212/I317UCAMA4_I317ATTAMA4_ATT/
yinxzon said:
there is no US version..
Click to expand...
Click to collapse
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN
se1000 said:
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN
Click to expand...
Click to collapse
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
yinxzon said:
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Are you putting the phone in download mode?
se1000 said:
Are you putting the phone in download mode?
Click to expand...
Click to collapse
yes it is. says downloading do not turn off target!!
yinxzon said:
yes it is. says downloading do not turn off target!!
Click to expand...
Click to collapse
Make sure you have the right drivers and the odin box shows blue
se1000 said:
Make sure you have the right drivers and the odin box shows blue
Click to expand...
Click to collapse
Failed! Drivers should be installed as it shows up on device manager after I installed Kies 3.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
downloaded both roms and both failed again
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You haven't said how this happened...
Did you flash a custom rom then it failed to boot?
Do you have custom recovery installed?
Tried odin on another computer or different USB port?
I had strange errors like that when I used a different usb cable. Went back to the genuine samsung one that came with the phone and it was ok.
Also, make sure Kies isn't loaded when you are trying to flash.
Your phone was stuck in boot screen. You could just have it factory wiped your or reset cuz the system files were corrupt and can't fully load... now that you may or may not have damaged the rom from flashing different flash file. Say good bye to your data... you have to search for the stock rom of your unit and search for tuts on how to use heimdall...
Sent from my HUAWEI P6-U06 using XDA Free mobile app
I downloaded various custom roms, all of which failed once this happened. I havent tried odin on a different computer and I only have one usb on my surface pro 3. I will try another computer.
I am using the original USB.
What do you mean Kies isnt loaded... I am using the Kies md5???
darqo, i am using the stock rom.
heimdall doesnt work either.
when installing the driver on zadig i only see the gadget serial and i dont see the samsung driver for me to update.
if it detects your device it can flash it use heimdall to fix your kernel preloaders and be sure to download the apropriate flash files.... some russian forums has lots of stock roms to choose from. what seems to be the usual error, is the first thing you must start with. dig on google for some tuts to resolve the error. in my case i disabled samsung kies. i only used its preloader drivers to detect my device. then used other software to fix it... i had that problem too with stuborn drivers. i used usbdeview to remove unwanted drivers the keeps bugging the program the instal the usb drivers from samsung kies program folder... you need a clean pit file for your device and fresh stock rom, a clean or fixed cache.rfs, dbdata.rfs to fix corrupted partitions of your unit...
''SOME DEVS ARE LAZY THESE DAYS, CAN'T BLAME THEM THEY NEED TO EARN A LIVING''
Sent from my Connect-V3 using XDA Free mobile app

[Completed] Samsung Galaxy S1 I93000 [HELP]

So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?
Duke55555 said:
So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?
Click to expand...
Click to collapse
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Yes i did,sorry for delay

Issue when trying to root : <OSM> All threads completed. (succeed 0 / failed 0)

I was trying to root my SM-G920F ,which is running Android 6.0.1, when i received the following message on Odin3.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
the phone was in download mode (Odin) and the developer option is On as it is the case with USB debugging, also the reactivation lock is off.
Android version : 6.0.1
Baseband version : G920FXXU4DPI9
Kernel Version : 3.10.61-8821257 Sep 16 2016
Build Number MMB29K.G920FXXU4DPIL
KNOX Version : KNOX 2.6
ANY help will be appreciated.
CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Click to expand...
Click to collapse
You're trying to flash wrong file. Try this;
https://download.chainfire.eu/733/CF-Root/CF-Auto-Root/CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip
boogiesamy said:
did you tried it with cf autoroot? make sure you also have enabled oem unlock in developers options, if still not work try to flash an older firmware in phone
Click to expand...
Click to collapse
I'm couln't find "OEM UNLOCK" anywhere
forumber2 said:
You're trying to flash wrong file. Try this;
....
Click to expand...
Click to collapse
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
boogiesamy said:
Just flash this firmware version: https://drive.google.com/file/d/0BzcqBQZhElPfZ0lhcHR2RmdRUFk/view?usp=drivesdk
After flash hard reset, then try to root with cf autoroot again
Click to expand...
Click to collapse
Can you please point me to a guide ?
emGiin said:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
Click to expand...
Click to collapse
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
forumber2 said:
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
Click to expand...
Click to collapse
Yes i was using the in-built Odin and the phone was in download mode, i'll try another usb cable.
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
boogiesamy said:
Use this step by step guide on flashing full firmware https://simunlockremote.com/how-to-flash-using-odin/
Click to expand...
Click to collapse
It's not related the installed firmware.

Categories

Resources