Database Info

How-to Revert to stock

I am not responsible if you brick your phone although you are likely soft bricked if you are reading this guide. This is how I successfully restored after flashing a T959 Odin rom/pit, I had to use a Jig after to get into download mode then was provided the necessary files by cnote74 on the following thread
http://forum.xda-developers.com/showthread.php?t=978836&page=16
Here is a Jig on Amazon, I bought mine on Ebay for 3 dollars.
http://www.amazon.com/SainSmart-Dongle-Samsung-Captivate-Vibrant/dp/B0053H73JQ
1.Open Odin.
2.Remove your memory and sim card
3.Boot your T959V into Download mode (Hold volume up + volume down then plug in your usb cable)
4.In Odin check Re-Partition, Auto Reboot, F.Reset Time
5.Select Sgs4g.pit for the PIT file
6.Select T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 for PDA
7.Select T959VUVKC1-Phone-CL932707.tar.md5 for Phone
8.Select SGH-T959V-CSC-TMB.tar.md5 for CSC
9.Click start.....
10.Success!
D/L
Odin
KC1

Thought i saw something like this before, but nonetheless, thanks for this.
Sent from my rockin' Galaxy S 4G using XDA Premium App

Sorry to bump up an old thread, if anyone help who is familiar enough to help me with this, I really do appreciate.
Basically, I can't boot into the phone and I am currently stuck on "Firmware upgrade encountered an issue" error screen (http://androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png) whenever I boots up. I tried the step above on odin and it is giving the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
May I know what does this mean and what else can I try?

wyst said:
Sorry to bump up an old thread, if anyone help who is familiar enough to help me with this, I really do appreciate.
Basically, I can't boot into the phone and I am currently stuck on "Firmware upgrade encountered an issue" error screen (http://androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png) whenever I boots up. I tried the step above on odin and it is giving the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
May I know what does this mean and what else can I try?
Click to expand...
Click to collapse
Its been awhile since I used Odin (I used heimdall as I'm on linux...), but I think this means that Odin is having difficulty talking to your device. Have you checked that you have the right drivers installed? You could also try running Odin as administrator.
If this fails, another thing to try would be a One-Click - see http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Heimdall_One-Click
Good luck!

Help! Guess i bricked my phone

Hi Guys
My Phone bricked itself. I suddenly started to get in a bootloop all by itself. I tryed using zhingmings method on restoring stockrom
I couldn´t find a german one so i took the austrian, but i guess this is not a problem- is it?
I have acces to clockwork mode but if i try to make a factory reset it also just keeps restarting.
So when i try flashing the rom via odin i think it does nothing of worth i get this message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPF_I9100OJPLPC_I9100XXLPX_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPF_I9100OJPLPC_I9100XXLPX_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Also is there a way to turn of my phone. If i longpress power it just starts rebooting.
Your help is much appreciated.

Either you are in the wrong forum, or you are flashing the wrong rom....
So ask your question in the 9100 forum, or flash a P6800 rom
Good luck

May I know if you are using P6800 or I9100? Coz from the msg you posted you are flashing I9100 firmware. If you are using P6800, it will not work. It also might make things worst...
Sent from my GT-P6800 using xda app-developers app

help no one can solve this issue??!

My phone just boots to the "Saumsung Galaxy Note II" screen and it is stuck there. I dont think its a loop because it doesnt loop (by that I mean it doesnt disappear and appear).
I m afraid using odin would erase everything.
I want to save my data, what should I do? Which rom do i use?
I tried downloading 3 to 4 note 2 roms but they all failed in odin.
Please specify what I need to download in order to save my data.
At this point, I am also ready to just give up and restore factory settings. I went to the at&t technicans, who are completely useless and they used their roms and couldnt help at all. I went to a fix phone place and they couldnt do anything either.
Please help!

Ummmm do you know that you posted this in the s6 forum and not the note 2?
Sent from my SM-G920V using Tapatalk

i know but no one is capable of answering there.

Flash the stock Note 2 firmware on your phone via Odin. It should restore it to normal. Below are the stock firmware from Sammobile. Just pick the one from your country.
http://www.sammobile.com/firmwares/database/GT-N7100/

i tried the US version first.
http://www.sammobile.com/firmwares/confirm/13212/I317UCAMA4_I317ATTAMA4_ATT/

yinxzon said:
there is no US version..
Click to expand...
Click to collapse
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN

se1000 said:
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN
Click to expand...
Click to collapse
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)

yinxzon said:
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Are you putting the phone in download mode?

se1000 said:
Are you putting the phone in download mode?
Click to expand...
Click to collapse
yes it is. says downloading do not turn off target！！

yinxzon said:
yes it is. says downloading do not turn off target！！
Click to expand...
Click to collapse
Make sure you have the right drivers and the odin box shows blue

se1000 said:
Make sure you have the right drivers and the odin box shows blue
Click to expand...
Click to collapse
Failed!　Drivers should be installed as it shows up on device manager after I installed Kies 3.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

downloaded both roms and both failed again
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

You haven't said how this happened...
Did you flash a custom rom then it failed to boot?
Do you have custom recovery installed?
Tried odin on another computer or different USB port?
I had strange errors like that when I used a different usb cable. Went back to the genuine samsung one that came with the phone and it was ok.
Also, make sure Kies isn't loaded when you are trying to flash.

Your phone was stuck in boot screen. You could just have it factory wiped your or reset cuz the system files were corrupt and can't fully load... now that you may or may not have damaged the rom from flashing different flash file. Say good bye to your data... you have to search for the stock rom of your unit and search for tuts on how to use heimdall...
Sent from my HUAWEI P6-U06 using XDA Free mobile app

I downloaded various custom roms, all of which failed once this happened. I havent tried odin on a different computer and I only have one usb on my surface pro 3. I will try another computer.
I am using the original USB.
What do you mean Kies isnt loaded... I am using the Kies md5???
darqo, i am using the stock rom.

heimdall doesnt work either.
when installing the driver on zadig i only see the gadget serial and i dont see the samsung driver for me to update.

if it detects your device it can flash it use heimdall to fix your kernel preloaders and be sure to download the apropriate flash files.... some russian forums has lots of stock roms to choose from. what seems to be the usual error, is the first thing you must start with. dig on google for some tuts to resolve the error. in my case i disabled samsung kies. i only used its preloader drivers to detect my device. then used other software to fix it... i had that problem too with stuborn drivers. i used usbdeview to remove unwanted drivers the keeps bugging the program the instal the usb drivers from samsung kies program folder... you need a clean pit file for your device and fresh stock rom, a clean or fixed cache.rfs, dbdata.rfs to fix corrupted partitions of your unit...
''SOME DEVS ARE LAZY THESE DAYS, CAN'T BLAME THEM THEY NEED TO EARN A LIVING''
Sent from my Connect-V3 using XDA Free mobile app

SM G935U firmware on SM G935A

I have sm g935A with baseband version G935AUCU4CRE4 which i had flashed from odin months ago , i wanted to ask that can i flash g935U firmware in it and if so then which firmware i should flash it into in sammobile under the section of g935U firmware there are many firmware like USA , USA(T-MOBILE) , USA(AT&T) etc so which one should i flash it and which odin software should i use?

Flash
Beckchaos said:
I have sm g935A with baseband version G935AUCU4CRE4 which i had flashed from odin months ago , i wanted to ask that can i flash g935U firmware in it and if so then which firmware i should flash it into in sammobile under the section of g935U firmware there are many firmware like USA , USA(T-MOBILE) , USA(AT&T) etc so which one should i flash it and which odin software should i use?
Click to expand...
Click to collapse
https://forum.xda-developers.com/att-s7-edge/how-to/fw8-0-0-s7-edge-snapdragon-universal-t3845440
Hi, you can use this thread, I already use it and it's work perfectly, and the updates comes inmediatle yesterday done it and the update comes right away, use the Odin3 v3.13.1_3B_PatcheD, works on the first try.

saved my ass bro thanks a million

exetak said:
https://forum.xda-developers.com/att-s7-edge/how-to/fw8-0-0-s7-edge-snapdragon-universal-t3845440
Hi, you can use this thread, I already use it and it's work perfectly, and the updates comes inmediatle yesterday done it and the update comes right away, use the Odin3 v3.13.1_3B_PatcheD, works on the first try.
Click to expand...
Click to collapse
hello mate sorry for jist poping up here..
my s7edge original firmware is sm-g935a at&t 6.0 marshmallow. and then i flash it to sm-g935u 7.0 nougat..unlocked version via odin.. how can i root it now? im totally confuse.please help and give some tutorial how can i root it..thank you so much!

jetskie said:
hello mate sorry for jist poping up here..
my s7edge original firmware is sm-g935a at&t 6.0 marshmallow. and then i flash it to sm-g935u 7.0 nougat..unlocked version via odin.. how can i root it now? im totally confuse.please help and give some tutorial how can i root it..thank you so much!
Click to expand...
Click to collapse
I have the 935U firmware flashed to my sm-g935a AT&T phone. It is the Oreo version however and I believe I had to use a modified version of Odin at the time to flash it onto my phone. I'll go through my old bookmarks and notes and see what I can find regarding exact details and newer rom releases.
It sound like you did the same thing I did and just flashed your S7 with the official universal firmware which contains a lot less bloat. I flashed my phone almost exactly a year ago with my current oreo firmware.
I have the same question as well, is there an official way to root the snapdragon S7/S7 Edge from AT&T besides the crappy "engboot" workaround? Since it's now almost 2020? Do any modified versions of the "U" version rom exist for flashing onto the S7 Edge snapdragon models?
I have lots of questions and some research to do too mate, I'll keep you posted.

Sakima said:
I have the 935U firmware flashed to my sm-g935a AT&T phone. It is the Oreo version however and I believe I had to use a modified version of Odin at the time to flash it onto my phone. I'll go through my old bookmarks and notes and see what I can find regarding exact details and newer rom releases.
It sound like you did the same thing I did and just flashed your S7 with the official universal firmware which contains a lot less bloat. I flashed my phone almost exactly a year ago with my current oreo firmware.
I have the same question as well, is there an official way to root the snapdragon S7/S7 Edge from AT&T besides the crappy "engboot" workaround? Since it's now almost 2020? Do any modified versions of the "U" version rom exist for flashing onto the S7 Edge snapdragon models?
I have lots of questions and some research to do too mate, I'll keep you posted.
Click to expand...
Click to collapse
thank you mate for the information.. i guess were both hopeless for now..hoping for the official root in the future.. kindly inform me soon for the root update..thanks lot mate..

I am trying to install G935U on G935S. It always fail and couldnt flash the device properly. Also, ROM is in Korean and I want it in English. Please help.
I download the latest firmware from Sam mobile. Below error when using Home_CSC. With CSC_OYM, it stays at Setup Connection and finally fails. Tried with ODIN versions - 3.12.1, 3.12.3, 3.13.1, 3.13.3, 3.13.1_3B_PatcheD, 3.12_PrinceComsy with no luck.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Please help! I want to install the phone.
samsunggti9000 said:
I am trying to install G935U on G935S. It always fail and couldnt flash the device properly. Also, ROM is in Korean and I want it in English. Please help.
I download the latest firmware from Sam mobile. Below error when using Home_CSC. With CSC_OYM, it stays at Setup Connection and finally fails. Tried with ODIN versions - 3.12.1, 3.12.3, 3.13.1, 3.13.3, 3.13.1_3B_PatcheD, 3.12_PrinceComsy with no luck.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Please help! I want to install the phone.

My G930FXXU1DQG2 from Brazil has still Nougat..how can i install oreo?

Based version of my s7 is G930FXXU1DQG2 .so i found out it is from Brazil.. I bought it in Croatia and knox was already tripped. Still i have 7.0 and no official update for 8.0 is available.. currently phone is not rooted. How can i upgrade to 8.0 and which way is safest ? I apreciate evety help and sorry if my english is not so great

sams7 said:
Based version of my s7 is G930FXXU1DQG2 .so i found out it is from Brazil.. I bought it in Croatia and knox was already tripped. Still i have 7.0 and no official update for 8.0 is available.. currently phone is not rooted. How can i upgrade to 8.0 and which way is safest ? I apreciate evety help and sorry if my english is not so great
Click to expand...
Click to collapse
Download Samsung Smartswitch to your pc, plug the phone in and let Smartswitch update

cooltt said:
Download Samsung Smartswitch to your pc, plug the phone in and let Smartswitch update
Click to expand...
Click to collapse
i am not sure if you understand me. It says that software is already updated. i did what u sugested but i am still on andorid7.0 and smartswitch cant help.

https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ZTO/download/G930FXXU1DQG2/179848/ as u can see on this link this version which i have still has 7.0

sams7 said:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ZTO/download/G930FXXU1DQG2/179848/ as u can see on this link this version which i have still has 7.0
Click to expand...
Click to collapse
Ok, make sure development options are enabled then OEM unlock is enabled. Down load odin and the latest unbranded Oreo from sammobile and flash.
Do you know how to do any of this?

cooltt said:
Ok, make sure development options are enabled then OEM unlock is enabled. Down load odin and the latest unbranded Oreo from sammobile and flash.
Do you know how to do any of this?
Click to expand...
Click to collapse
Yes i do..already installed odin and downloaded some firmware from some tutorial on youtube and proces failed. Here is what odin has done :<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4071 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
it took only few seconds and this happend and stopped the proces.
So i decided to download this firmware and try again : https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ZTO/download/G930FXXS3ERLA/250062/
Is it better to try with this one or should i find another.

sams7 said:
Yes i do..already installed odin and downloaded some firmware from some tutorial on youtube and proces failed. Here is what odin has done :<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4071 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
it took only few seconds and this happend and stopped the proces.
So i decided to download this firmware and try again : https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ZTO/download/G930FXXS3ERLA/250062/
Is it better to try with this one or should i find another.
Click to expand...
Click to collapse
What country are you actually in?

cooltt said:
What country are you actually in?
Click to expand...
Click to collapse
Currently in Bosnia and Herzegovina. So my phone by the version nubmer is from Brazil,i bought it in Croatia and iam in Bosnia and Herzegovina. a bit crazy

sams7 said:
Currently in Bosnia and Herzegovina. So my phone by the version nubmer is from Brazil,i bought it in Croatia and iam in Bosnia and Herzegovina. a bit crazy
Click to expand...
Click to collapse
OK well because its a G930F you can flash any European firmware on Oreo.
This is the one for your country https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/TEB

Make sure also to have newest Odin installed ,any older Odin will not be able to flash Oreo stock rom .
As member above said u can install any country based stock firmware for g930f , u don't need oem unlock or debugging on ,it's only for rooting and installing TWRP ect.
Use Uk or Germany ,but u also can use BH,Croatian ect
Pozdrav iz Hrvatske! (Hello from Croatia)

Scorpionea said:
Make sure also to have newest Odin installed ,any older Odin will not be able to flash Oreo stock rom .
As member above said u can install any country based stock firmware for g930f , u don't need oem unlock or debugging on ,it's only for rooting and installing TWRP ect.
Use Uk or Germany ,but u also can use BH,Croatian ect
Pozdrav iz Hrvatske! (Hello from Croatia)
Click to expand...
Click to collapse
Thx , i'll try then with firmware that is for my country ( B&H) . I hope i dont get any error during flashing. Odin is v3.13 so that should do the trick. Only problem is download speed limit on this site,( for free membership is sooo slow ) so i'll get back to you guys later when download is completed.

sams7 said:
Thx , i'll try then with firmware that is for my country ( B&H) . I hope i dont get any error during flashing. Odin is v3.13 so that should do the trick. Only problem is download speed limit on this site,( for free membership is sooo slow ) so i'll get back to you guys later when download is completed.
Click to expand...
Click to collapse
I downloaded firmware,used lates odin and again same error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 3949 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do next? :/

You can use updato.com for faster speed or use samfirm app for windows (google it).
Hmm dont know why it is showing in odin cant open specified file.. try different usb cable . Make sure your download is not corrupted ect . Also disable OEM unlock if its enabled

Scorpionea said:
You can use updato.com for faster speed or use samfirm app for windows (google it).
Hmm dont know why it is showing in odin cant open specified file.. try different usb cable . Make sure your download is not corrupted ect . Also disable OEM unlock if its enabled
Click to expand...
Click to collapse
Also try Odin 3.12.7, make sure your not using Windows 8, Use SamFirm tool instead, make sure you have the correct USB drivers for samsung, turn off antivirus software on your pc while you flash.
This error can be many things i'm afraid.