I am not responsible if you brick your phone although you are likely soft bricked if you are reading this guide. This is how I successfully restored after flashing a T959 Odin rom/pit, I had to use a Jig after to get into download mode then was provided the necessary files by cnote74 on the following thread
http://forum.xda-developers.com/showthread.php?t=978836&page=16
Here is a Jig on Amazon, I bought mine on Ebay for 3 dollars.
http://www.amazon.com/SainSmart-Dongle-Samsung-Captivate-Vibrant/dp/B0053H73JQ
1.Open Odin.
2.Remove your memory and sim card
3.Boot your T959V into Download mode (Hold volume up + volume down then plug in your usb cable)
4.In Odin check Re-Partition, Auto Reboot, F.Reset Time
5.Select Sgs4g.pit for the PIT file
6.Select T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 for PDA
7.Select T959VUVKC1-Phone-CL932707.tar.md5 for Phone
8.Select SGH-T959V-CSC-TMB.tar.md5 for CSC
9.Click start.....
10.Success!
D/L
Odin
KC1
Thought i saw something like this before, but nonetheless, thanks for this.
Sent from my rockin' Galaxy S 4G using XDA Premium App
Sorry to bump up an old thread, if anyone help who is familiar enough to help me with this, I really do appreciate.
Basically, I can't boot into the phone and I am currently stuck on "Firmware upgrade encountered an issue" error screen (http://androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png) whenever I boots up. I tried the step above on odin and it is giving the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
May I know what does this mean and what else can I try?
wyst said:
Sorry to bump up an old thread, if anyone help who is familiar enough to help me with this, I really do appreciate.
Basically, I can't boot into the phone and I am currently stuck on "Firmware upgrade encountered an issue" error screen (http://androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png) whenever I boots up. I tried the step above on odin and it is giving the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
May I know what does this mean and what else can I try?
Click to expand...
Click to collapse
Its been awhile since I used Odin (I used heimdall as I'm on linux...), but I think this means that Odin is having difficulty talking to your device. Have you checked that you have the right drivers installed? You could also try running Odin as administrator.
If this fails, another thing to try would be a One-Click - see http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Heimdall_One-Click
Good luck!
Related
Hi Guys
My Phone bricked itself. I suddenly started to get in a bootloop all by itself. I tryed using zhingmings method on restoring stockrom
I couldn´t find a german one so i took the austrian, but i guess this is not a problem- is it?
I have acces to clockwork mode but if i try to make a factory reset it also just keeps restarting.
So when i try flashing the rom via odin i think it does nothing of worth i get this message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPF_I9100OJPLPC_I9100XXLPX_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPF_I9100OJPLPC_I9100XXLPX_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Also is there a way to turn of my phone. If i longpress power it just starts rebooting.
Your help is much appreciated.
Either you are in the wrong forum, or you are flashing the wrong rom....
So ask your question in the 9100 forum, or flash a P6800 rom
Good luck
May I know if you are using P6800 or I9100? Coz from the msg you posted you are flashing I9100 firmware. If you are using P6800, it will not work. It also might make things worst...
Sent from my GT-P6800 using xda app-developers app
I made a mistake upgrading my galaxy note with odin!!!!
I got the message ...
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies does not work, not recognizes my phone
When I try to go into recovery mode volume up + power + home, it goes to the same message.
I go into downloading mode, volume down +power +home
And Odin recognizes the device but a got this fail
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I try with different tar to get back but did not work, If someone can help me I will be very thankful.
Tars used:
N7000XXKKA_N7000BUKK1_N7000SFRKK1_HOME.tar
N7000_CODE_N7000ZSLPF_CL558430_REV02_user_low_ship.tar
Rooted_Stock_Odex_N7000XXLC1.tar
N7000XXLS2.tar
So I was trying to wipe my tablet in order sell it. It had Cyanogenmod 9.0 on it. After I factory wiped, it was stuck in a boot loop. Wouldn't get past the Cyanogenmod boot screen before it rebooted.
So I tried going into CWM recovery and reflashing Cyanogenmod. Once I did that, it now boots up onto the "Firmware upgrade encountered an issue" screen and won't go to anything else.
If I try to put it into either recovery or download, it just turns off then goes back to the same screen. I've tried to use Kies to restore it and nothing. Tried Odin and this comes up
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3113_CWM_RECOVERY-6.0.1.1_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)"
I have no idea what to do past this. Any help would be greatly appreciated.
Tab 2 firmware upgrade encountered an issue a solution
Zargari said:
So I was trying to wipe my tablet in order sell it. It had Cyanogenmod 9.0 on it. After I factory wiped, it was stuck in a boot loop. Wouldn't get past the Cyanogenmod boot screen before it rebooted.
So I tried going into CWM recovery and reflashing Cyanogenmod. Once I did that, it now boots up onto the "Firmware upgrade encountered an issue" screen and won't go to anything else.
If I try to put it into either recovery or download, it just turns off then goes back to the same screen. I've tried to use Kies to restore it and nothing. Tried Odin and this comes up
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3113_CWM_RECOVERY-6.0.1.1_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)"
I have no idea what to do past this. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem, kies didn't work, neither did odin. I used every fix suggestion I could find.
It finally dawned on me that the battery was holding everything in place. I took off the back of my Tab 2 and removed
the battery. I re-installed the battery after 10 minutes and was able to re install a stock rom. I hope thishelps.
Hello
Here is a brief history of my SGH-I337. I need help to debug.
1. Screen cracked. Got it fixed by Samsung, where it was reset to Factory default.
2. Try to install Lollipop through Kies3, when the phone got stuck in EFR and cannot boot up.
3. Tried everything that freakboy13 posted -- did not fix the issue.
4. downloaded firmware from Sammobile.com; below is the Odin error log.
-- begin error log----
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
-- end of error log------
Do I need to check other boxes to overcome this write fail? Appreciate any suggestions.
thanks
Hi, thank you for using XDA Assist. Odin is failing because you can't flash the mdl firmware on your device. You need to flash nb1, which is not available on sammobile. See this excellent guide by gutt13, http://forum.xda-developers.com/showthread.php?t=2616221. If you have further questions ask in that thread. They are the experts on your device.
Thread closed.
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pablo77777 said:
I followed a tutorial because its looked the best i had seen for a while and it had most the files included it was off this forum in the developers section so i booted my s5300 into download mode started up odin 3 and begin placing the files in the correct paths. Once in the correct paths i pressed start and here is what i get a fail? can anyone explain why this might be happening i think the old owner who gave me the brick said he had partioned it so he could use a custom rom ive booted into recovery mode and i see is it cyanmobile amd clockworkmod but i think the clockwork dont have any files? and something else anyway here is the code of the odin result any help would be very helpful has ive been up all night trying to repair it to no avail i dont know how much more i can take hehe?:laugh:
EDIT: might be worth mentioning it does still have a custom rom on the partition i can successfully install it boot when i reboot it just says onkey 7s reset?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5300_XXLF5.tar.md5 is valid.
<OSM> MODEM_S5300_XXLF5.tar.md5 is valid.
<OSM> CSC_S5300_BTULF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2560314