Database Info

Help i killed my Phone:D

I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: *************
imei: **************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s

Jojo1992 said:
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: SH26RW404047
imei: 359901049107937
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.

Jojo1992 said:
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Click to expand...
Click to collapse
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7

tivofool said:
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
Click to expand...
Click to collapse
i downloaded an RUU:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
then i make this:
fastboot devices
fastboot oem lock
then start RUU, but error no connection to device but in cmd i get a connection

I have a CID 111111 is that the Problem?

Jojo1992 said:
I have a CID 111111 is that the Problem?
Click to expand...
Click to collapse
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.

tivofool said:
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
Click to expand...
Click to collapse
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?

Jojo1992 said:
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Click to expand...
Click to collapse
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151

tivofool said:
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again

Jojo1992 said:
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Click to expand...
Click to collapse
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.

tivofool said:
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
Click to expand...
Click to collapse
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5

Jojo1992 said:
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Click to expand...
Click to collapse
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755

tivofool said:
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
Click to expand...
Click to collapse
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???

Jojo1992 said:
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Click to expand...
Click to collapse
There is a stock recovery here
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
The SECOND download is the stock one
Unless you change the name of the recovery the command will probably look more like this:
fastboot flash recovery ville_recovery_signed.img
And yes
fastboot oem lock
after you have flashed the stock recovery of course

tivofool said:
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
[/url]
Click to expand...
Click to collapse
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5

tominozh said:
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
Click to expand...
Click to collapse
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?

Jojo1992 said:
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Click to expand...
Click to collapse
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895

tivofool said:
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
Click to expand...
Click to collapse
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan

Jojo1992 said:
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Click to expand...
Click to collapse
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)

tivofool said:
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
Click to expand...
Click to collapse
ok thank you very much for the help!

[Q] Super CID and S-OFF not working (3.16.111.10, HBOOT 2.15)

Hey Everyone,
after I nearly bricked my One S4, I now would like to flash any custom rom.
Unfortunately, I can't change my CID to 11111111 and also I can't get S-off.
I tried / made the following:
1. I got root & unlock.
2. I tried to change the CID with ADB-push etc. - for some strange reason, I can write the changed mmcblk0p4 to the dev-folder, but immediately after I have written it (no write error!) and if I reopen it - no matter with a root explorer or by pulling it via ADB it has not changed.
I also tried to copy the file from the SD with a root explorer to the folder - same thing, copy works and immediately after it, the old CID is inside.
3. For obtaining S-off I tried all available options, the appropriate version of Moonshine (which stucks with pages and pages of dots - as far as I remember after step 3) and also Rumrunner 0.5 - which says I should update to a newer version.
Facepalm is no option as it is only for SuperCID.
Has anyone an Idea what I could do?
Here is additionaly the fastboot getvar all:
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...............
(bootloader) imei: ..............
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4181mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.089s
Regards & thanks,
Matthias

http://forum.xda-developers.com/showthread.php?t=2558334
Sent from my One S using XDA Premium 4 mobile app

Bad.Fish said:
http://forum.xda-developers.com/showthread.php?t=2558334
Sent from my One S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope - I told already in my first post:
3. For obtaining S-off I tried all available options, the appropriate version of Moonshine (which stucks with pages and pages of dots - as far as I remember after step 3) and also Rumrunner 0.5 - which says I should update to a newer version.
Click to expand...
Click to collapse
Any other ideas?

I was in your shoes until I found the link I posted. Maybe you didn't follow directions for rumrunner properly. Use rumrunner downloads from that link and try again. Won't hurt
Sent from my One S using XDA Premium 4 mobile app

Bad.Fish said:
I was in your shoes until I found the link I posted. Maybe you didn't follow directions for rumrunner properly. Use rumrunner downloads from that link and try again. Won't hurt
Sent from my One S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the same problem. I can't get S-OFF after unlocking bootloader and rooting. Same Hboot (2.15), tried rumrunner: on Windows it says I need to download updated version, on Ubuntu it won't go past pouring (1). Also tried firewater without success.
I was going to flash ViperOne S 3.2.0 after getting S-OFF. Should I try to flash it before getting S-OFF? Thanks for help!
(My software version is 3.16.401.10)

ZioRò said:
I have the same problem. I can't get S-OFF after unlocking bootloader and rooting. Same Hboot (2.15), tried rumrunner: on Windows it says I need to download updated version, on Ubuntu it won't go past pouring (1). Also tried firewater without success.
I was going to flash ViperOne S 3.2.0 after getting S-OFF. Should I try to flash it before getting S-OFF? Thanks for help!
(My software version is 3.16.401.10)
Click to expand...
Click to collapse
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus

Maeffjus said:
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus
Click to expand...
Click to collapse
Did you flash directly from TWRP? Thanks!

ZioRò said:
Did you flash directly from TWRP? Thanks!
Click to expand...
Click to collapse
The ROM yes, the boot is a img file - you have flash it with fastboot (fastboot flash boot xxxhbootxxx.img - however the file name is)

Maeffjus said:
The ROM yes, the boot is a img file - you have flash it with fastboot (fastboot flash boot xxxhbootxxx.img - however the file name is)
Click to expand...
Click to collapse
Managed to flash the rom! It's awesome, so many customizations available
Anyway, I'll try to S-Off again and let you know..

Maeffjus said:
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus
Click to expand...
Click to collapse
I finally managed to get S-Off some days ago. It was just due to my antivirus, Bitdefender. Even though I disabled it, any way to s-off wouldn't work. Uninstalled it and then ran Rumrunner again. Everything went fine!!

Did you try moonshine S-OFF?For your Firmware and cid no: http://moonshine.io/download/di7ki1txf7jq.html
And instructions:
http://forum.xda-developers.com/showthread.php?t=2325590

Unfortunately both did not work AGAIN - I disabled the AV software and disabled the services etc as well.
Rumrunner says Error und Moonshinhe runs forever (see attachement).
Any Ideas?

Maeffjus said:
Unfortunately both did not work AGAIN - I disabled the AV software and disabled the services etc as well.
Rumrunner says Error und Moonshinhe runs forever (see attachement).
Any Ideas?
Click to expand...
Click to collapse
Read moonshine instructions carefully and try again.

hmgurbuz said:
Read moonshine instructions carefully and try again.
Click to expand...
Click to collapse
I really really did - it is not that complicated to foolow them up - for instance, i have never ever installed the HTC Sync Manager (Laptop is one month old)

Remove all of antivirus programs.It should if you are on 3.16.111.10

[q] not booting

My HTC One SV (LTE europe version ) stuck while booting, it displays white logo screen only,
now i unlocked bootloader and tried to flash rom, but failed,
How i can flash a custom rom or original oerating systedm in my phone,
please help me.

anpayy said:
My HTC One SV (LTE europe version ) stuck while booting, it displays white logo screen only,
now i unlocked bootloader and tried to flash rom, but failed,
How i can flash a custom rom or original oerating systedm in my phone,
please help me.
Click to expand...
Click to collapse
Can you get into the bootloader? If you can, you can flash TWRP recovery via fastboot and flash a custom Rom with the recovery.

Yes
thearif said:
Can you get into the bootloader? If you can, you can flash TWRP recovery via fastboot and flash a custom Rom with the recovery.
Click to expand...
Click to collapse
i can get into bootloder, but where can i get TWRP recovery and custom rom file ?

anpayy said:
i can get into bootloder, but where can i get TWRP recovery and custom rom file ?
Click to expand...
Click to collapse
Go to http://forum.xda-developers.com/showthread.php?t=2292432 . Read through and find the recovery there. It is pretty well explained there. I am on my mobile so I am not sure of the link will take you to the first page. It is on the first page. Make sure you get the correct recovery for your phone model.

Original rom
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???

anpayy said:
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???
Click to expand...
Click to collapse
That I do not know, but if my memory serves me right, there was a thread either in android development or general sections with the latest OTAs. You might wanna search for that...

anpayy said:
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???
Click to expand...
Click to collapse
You've already got the link to my index thread, but it seems you are to lazy to have a look at it. You even only need to watch for the software number and you will easily find what you are searching for.

Os intallation failed
i tried to install OTA update through TWRP recovery , but it failed

You can't flash this in recovery. Use TWRP recovery and flash the rom (not the Ota). Links are in my index thread.

Installed rom
Sucessfully instaled Viper SV rom,
but still phone did not booting,

Did you also flash boot.img of the rom in fastboot?

no
I missed to boot boot.img,
Now phone is working perfectly...........
Thanks all........specially old.splatterhand & thearif

Nice

anpayy said:
I missed to boot boot.img,
Now phone is working perfectly...........
Thanks all........specially old.splatterhand & thearif
Click to expand...
Click to collapse
Good to hear that...

Hi all,
I'm new in this forum so I post there.
My problems starts after try to updete htc one sv k2_ul. After update I get red triangle and then my phone freezed on white screen with logo.
Try to do factory reset from bootloader, but nothing happen. After few days looking information I unlock bootloader and try flash new boot, but after that I get Tampered. I found if I must s-off, but how I can get it? My pc found phone only on fastboot mode. Any ideas?

miegas said:
Hi all,
I'm new in this forum so I post there.
My problems starts after try to updete htc one sv k2_ul. After update I get red triangle and then my phone freezed on white screen with logo.
Try to do factory reset from bootloader, but nothing happen. After few days looking information I unlock bootloader and try flash new boot, but after that I get Tampered. I found if I must s-off, but how I can get it? My pc found phone only on fastboot mode. Any ideas?
Click to expand...
Click to collapse
You can't get S-off, without working OS.
You don't have an OS anymore on your phone?
Are you running a custom recovery like TWRP?
Run this fastboot cmd and copy the output here (remove your imei & serial number):
Code:
fastboot getvar all

old.splatterhand said:
You can't get S-off, without working OS.
You don't have an OS anymore on your phone?
Are you running a custom recovery like TWRP?
Run this fastboot cmd and copy the output here (remove your imei & serial number):
Code:
fastboot getvar all
Click to expand...
Click to collapse
My os just stop working.
I don't try TWRP, today will look more about that.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.15.40a.00.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.401.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4143mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.075s
edit
I flashed TWRP and I make restore, but phone won't start anyway. Maybe need to flash new os?

Flash the stock rom in TWRP, and don't forget to flash boot.img of the rom in fastboot.
Links are in my index thread.
Make a backup in recovery (just in case) and a wipe (advanced -> everything except int & ext sdcard) before.

old.splatterhand said:
Flash the stock rom in TWRP, and don't forget to flash boot.img of the rom in fastboot.
Links are in my index thread.
Make a backup in recovery (just in case) and a wipe (advanced -> everything except int & ext sdcard) before.
Click to expand...
Click to collapse
Something I make wrong. I flashed TWRP, then installed ViperSV, phone restarted and booted TWRP. Then I found boot.img in yours index thead.
Then in fastboot flashed new boot, but phone still booting in TWRP. What I make wrong?

You need to flash the boot.img thats inside the ViperSV.zip, not any from my index thread.

I have no ROM. How install one?

Hi there!
I unlock the bootleader and root my device (HTC One S) to install another ROM.
I have done a full clean, so I have nothing. I installed the clockworkmod recovery.
What Can I do to install the factory rom and let my device like factory, but with the bootloader unlocked?
PD: Sorry with my english.

jajasuperman said:
Hi there!
I unlock the bootleader and root my device (HTC One S) to install another ROM.
I have done a full clean, so I have nothing. I installed the clockworkmod recovery.
What Can I do to install the factory rom and let my device like factory, but with the bootloader unlocked?
PD: Sorry with my english.
Click to expand...
Click to collapse
You can relock your bootloader, flash a RUU (stock firmware package), unlock the bootloader again. Or you can just flash a sense based custom rom. BUT if I was you, I would go for a Kitkat (Android 4.4.4) or Lollipop (5.0.2) custom rom, as it really improves your One S

LS.xD said:
You can relock your bootloader, flash a RUU (stock firmware package), unlock the bootloader again. Or you can just flash a sense based custom rom. BUT if I was you, I would go for a Kitkat (Android 4.4.4) or Lollipop (5.0.2) custom rom, as it really improves your One S
Click to expand...
Click to collapse
Thanks for answering.
I prefer the second jejeje
Which rom would you recommend me? It doenst matter if it is kitkat or lollipop. I wanna use the mobile
I dont know if it is a S3 or S4 :S

jajasuperman said:
Thanks for answering.
I prefer the second jejeje
Which rom would you recommend me? It doenst matter if it is kitkat or lollipop. I wanna use the mobile
I dont know if it is a S3 or S4 :S
Click to expand...
Click to collapse
Thats quite bad Are you familiar with using fastboot commands? Its important if its S3 or S4.

LS.xD said:
Thats quite bad Are you familiar with using fastboot commands? Its important if its S3 or S4.
Click to expand...
Click to collapse
Yes, I have installed some recoveryes using it
What should I do?

jajasuperman said:
Yes, I have installed some recoveryes using it
What should I do?
Click to expand...
Click to collapse
Connect phone in "fastboot" mode to your computer.
Open command line and type:
fastboot getvar all
Post the output here but remove your "IMEI"

LS.xD said:
Connect phone in "fastboot" mode to your computer.
Open command line and type:
fastboot getvar all
Post the output here but remove your "IMEI"
Click to expand...
Click to collapse
Here u have:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH24WW408505
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4174mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

HTC One S - S4 - Europe
1. step: flash actual recovery
Fastboot flash recovery openrecovery-twrp-2.8.5.0-ville.img
Once done choose your rom from HERE

LS.xD said:
HTC One S - S4 - Europe
1. step: flash actual recovery
Fastboot flash recovery openrecovery-twrp-2.8.5.0-ville.img
Once done choose your rom from HERE
Click to expand...
Click to collapse
Installed.
I´ll choose this: http://forum.xda-developers.com/htc-one-s/development/rom-resurrection-remix-lollipop-t2986405
What is the second step?

jajasuperman said:
Installed.
I´ll choose this: http://forum.xda-developers.com/htc-one-s/development/rom-resurrection-remix-lollipop-t2986405
What is the second step?
Click to expand...
Click to collapse
Download ROM - GApps - SuperSU
copy all to your sdcard. (you can connect your phone via twrp recovery: "Mount" --> "Enable MTP"
then press "Install" and select the downloaded zips.
Order: 1. Rom 2. GApps 3. SuperSU (4. Kernel)
You can optionally use a "custom kernel" e.g. Frosted Kernel which can be controlled with Trickster Mod

LS.xD said:
Download ROM - GApps - SuperSU
copy all to your sdcard. (you can connect your phone via twrp recovery: "Mount" --> "Enable MTP"
then press "Install" and select the downloaded zips.
Order: 1. Rom 2. GApps 3. SuperSU
Click to expand...
Click to collapse
I tried only flashing the Rom, and when I reboot, I see a black screen and the device do nothing :S
The Roms says something habout 2.15 and 2.16. Do I nothing something else?

jajasuperman said:
I tried only flashing the Rom, and when I reboot, I see a black screen and the device do nothing :S
The Roms says something habout 2.15 and 2.16. Do I nothing something else?
Click to expand...
Click to collapse
Yup i forgot that your phone is S-ON. S-ON means you need to flash the kernel manually via fastboot each time you install a rom. Flash 1. 2. 3. and then connect your phone in fastboot mode to the computer.
Extract "boot.img" from the rom.zip and flash it via fastboot:
Fastboot flash boot boot.img

LS.xD said:
Yup i forgot that your phone is S-ON. S-ON means you need to flash the kernel manually via fastboot each time you install a rom. Flash 1. 2. 3. and then connect your phone in fastboot mode to the computer.
Extract "boot.img" from the rom.zip and flash it via fastboot:
Fastboot flash boot boot.img
Click to expand...
Click to collapse
You are the best!
Thank thank thank you very very much DD
Wow

jajasuperman said:
You are the best!
Thank thank thank you very very much DD
Wow
Click to expand...
Click to collapse
You're happy - me too

Problem with Custom Roms

Hi there i tested these ROMS on mine HTC One S Ville S4 (International).
Here the Results:
Maximus 10.0.0 - http://forum.xda-developers.com/showthread.php?t=2445392
I´ve followed all steps but no luck, the phone reach splash screen and all i get is all 3 lights on the bottom and a green on the top illuminated.
LIBERTY ROM - The Sixth Element 4.4.2/4.4.3
Almost the same situation with Maximus Rom but with Black splash screen this time on the 2 versions of this Rom
At the moment i have the ViperOneS 3.2.0 but i would like test other Roms.
Here my specs:
----> Start <----
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.16.31501S.17_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: SH24PW******
(bootloader) imei: ***************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3873mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
----> End <----

you need a specific hboot to try the rom. i think is 2.15 and you have 1.13.. so..... i think that is the problem.

first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...

grorg said:
first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...
Click to expand...
Click to collapse
No luck with RUUs

vic_111 said:
No luck with RUUs
Click to expand...
Click to collapse
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)

LS.xD said:
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)
Click to expand...
Click to collapse
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware

Rapier said:
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware
Click to expand...
Click to collapse
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.

LS.xD said:
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.
Click to expand...
Click to collapse
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S

vic_111 said:
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S
Click to expand...
Click to collapse
You can unlock it at any time, but you will have to lock it before upgrade the firmware.

LS.xD said:
You can unlock it at any time, but you will have to lock it before upgrade the firmware.
Click to expand...
Click to collapse
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Click to expand...
Click to collapse
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
Click to expand...
Click to collapse
I'm glad you finally made it. HBOOT 2.16 works with S-OFF only, thats why I uploaded 2.15. As @Rapier mentioned earlier, you can use rumrunner.us for easily getting S-OFF

Mind you that hboot 2.16 gives you shared internal storage. E.g. all free space is available to all partitions. This may come tot be necessary for you if flashing lollipop roms since the "foot print" of installed aps on lollipop becomes much larger. This has to do with runtime environment... Kitkat runs with Dalvik Cache whereas Lollipop runs with the Android Runtime aka ART.
So, staying on hboot 2.15 give you the old partition layout with approx. 1 GByte(??) free for apps and 7 as internal SD.
While hboot 2.16 serves all your free internal storage to all partitions. This saves you headache of internal space for apps running out.
(Someone may deel to fill in the technical gaps i left in)
Cheers , happy hboot 2.16 user.
Verstuurd vanaf mijn One S met Tapatalk