Why s3 is not recognized in dm.+modem+rmnet - Galaxy Note II, Galaxy S III Developer Discussion

I have a big problem... My gt i9300 has lost the imei after
A several flash by Odin.. Probably I got the imei in 4.3 jb f/w.
But I was using 4.1 which is my original.. I followed process of flash and
I flashed it on 4.1 french firmware but I won't get my imei..
Then I found lots of methods to get imei back..
But almost all the method's required my phone should be in dm+rmnet +modem
Mode... I had a put my phone in respective mode but it won't be able to connect to pc in such kind of mode.
It's showing usb won't recognized... But it connected in mtp mode which is useless for those methods.
Please if someone have solution for these reply me.. Thanks a lot.

rahul1681990 said:
I have a big problem... My gt i9300 has lost the imei after
A several flash by Odin.. Probably I got the imei in 4.3 jb f/w.
But I was using 4.1 which is my original.. I followed process of flash and
I flashed it on 4.1 french firmware but I won't get my imei..
Then I found lots of methods to get imei back..
But almost all the method's required my phone should be in dm+rmnet +modem
Mode... I had a put my phone in respective mode but it won't be able to connect to pc in such kind of mode.
It's showing usb won't recognized... But it connected in mtp mode which is useless for those methods.
Please if someone have solution for these reply me.. Thanks a lot.
Click to expand...
Click to collapse
What computer OS are you running? Ive heard xp works the best and win 8 is the worst for this kind of thing.
I had the same problem on my win8 machine. I tried it again on an older win xp machine and it recognized it right away in dm+rmnet+modem mode. on COM port 10. So I was able to use EFS tools to restore my IMEI.
Also, this should be in Q&A/Troubleshooting section. So don't be surprised if this thread gets moved or deleted.

Related

AP Fastboot Flash Mode not being detected on pc

I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
greatanomaly said:
I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
Click to expand...
Click to collapse
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
1BadWolf said:
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
Click to expand...
Click to collapse
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
greatanomaly said:
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
Click to expand...
Click to collapse
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
stuck on boot logo
1BadWolf said:
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
Click to expand...
Click to collapse
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Gr8mobiPro said:
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Chill man..nothing to worry about..please install motorola drivers..it should work.
its still not working
nishant203 said:
Chill man..nothing to worry about..please install motorola drivers..it should work.
Click to expand...
Click to collapse
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Use Virtual PC
I still have the same issue. I have installed Windows 7 on VM Ware workstation i.e virtual desktop and then followed the below steps :-
-Reboot your Virtual PC
-Install Motorola drivers.
-Reboot your computer
-Install RSD Lite
-Reboot your computer
-Boot your phone into Fastboot mode
-Connect your phone to your computer using a high-quality (preferably OEM) cable.
-Let your PC install any necessary drivers. When it finishes it should tell you that the device "Fastboot Edison S" is ready for use.
-Turn your phone off, disconnect the cable
-Reboot your computer
-Boot your phone back into Fastboot mode
-Wait a couple seconds then connect your phone to your computer
-Wait a couple more seconds, then look at the bottom text that's displayed on your phone. It should say
This means that your phone is connected to your computer.
-Open up RSD Lite
-Wait a couple seconds. At the top of the list should be your phone (under model it should say "Fastboot Edison S")
-If you've done all this and everything has worked out for you, flash the fxz! Make sure to follow the instructions in the noob thread as specifically as possible
Gr8mobiPro said:
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
This seems to be happening more lately. it IS a driver issue of some sort, that is for sure. I would just use one of the scripts, or moto-fastboot manually. they do the same thing as rsd but through command line either with your own typing, or a .bat script.
This may also work better in linux, so you can try downloading a live cd/usb of ubuntu and seeing if it is recognized. no need for drives with linux, just download one of the scripts that includes the moto-fastboot utility. Let me know if you need more help.
same issue
i am having the same issue with my at&t atrix 2. it is soft bricked due to an upgrade from gb to jbleak. ap fastboot flash mode (s) oa.65 battery ok ok to program connect usb data cable same message i have installed different motorola usb driver versions. i have also soldered the 4 pin to the 1 red+5v factory usb cable
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNE6DkvEZi41YPAYKVPqH_AlA4f4cQ
but still my pc says unable to recognize usb device. i dnt what to do any more. im in mexico and purchasing a new phone is very expensive i need help is there something any one can do i am sure my device is not completely bricked i just cant get the mofokin pc to recognize the mofokin phone in fastboot

[Q] Help!!Network Lost, IMEI number lost, Cant use network

Phone: Samsung galaxy S 4G ( SGH-T959V)
ROM: CM 7.1
I was using my gadget comfortably for a long time. Suddenly, i lost my mobile network and couldnt make calls. I tried to check network status in
SETTINGS->ABOUT PHONE. There was no help. The IMEI number seems to be lost too. i tried changing the ROM . The results were same. Please Help!!
Look in the development thread grab a one click from the heimdall one click thread and flash back to stock.
The problem is the computer does'nt recognize my phone.. In order to use HEIMDALL, a valid USB connection should exist for communication between the device and the PC.
i have installed all the drivers. Tried to connect with different cables and different platforms(computer). what can i do? Please help!
Have you tried a different usb port? I use the one on the front for heimdall and one on the back for Odin. Most would recommend the back ports.
Delete all drivers and let heimdall reinstall them.
Yes I tried everything. Is there anything I can do? Is there ODIN supported for this phone?
is there any flashable stock rom available for this DEVICE? PLease help!!

[Q] brick ??!

Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!
What custom rom did you had ? 4.4.2 or 4.1.2 ?
KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA
First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk
I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!
Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk
Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?

[Completed] Android Note 2 stuck on firmware encounter an issue

Hope this is the right place to be asking this question
First timer so pls excuse if i miss out anything.
I was doing an ota firmware update to my t mobile Samsung note 2 (SGH-T889) using kies 3.1. My phone was stuck on 41 percent for about an hour so i disconnected the phone thinking that it will reboot and ask me to reconnect. Well since it didnt, its been stuck on this firmware encounter an issue please selcet recovery mode in kies and try again.
I hooked it back up and now in kies it just says connecting but nothing happens.
i tried putting my phone in download mode to see if itll connect to kies and still nothing. The phone wont allow me to get into recovery mode due to this issue. Im a mac user so i even downloaded wine to use odin i downloaded all samsung drivers needed for a connection and odin cant even detect my phone. Im not sure if usb debugging is on in my phone . I cant access nothing on my phone i tried many tricks on youtube looked at xda forms i even went into tmobile and they didnt kno what to do. Im using the factory usb, i tried diff ports and just cant seem to get a good connectiong between either programs. Please helps its been 3 days without a phone..thank you
Hi,
I see you've already asked about this in the appropriate section for your device.
http://forum.xda-developers.com/note-2-tmobile/help/note-2-stuck-firmware-encounter-issue-t3217172
That's awesome! :good:
As XDA Assist is here to help navigate the site, not for support... I'll close this thread since you already found your way.
Good luck!

Odin Broke my Phone, Flashed TWRP Using Odin 3.10.7

I went into Odin mode and flashed TWRP in the AP/PDA as all tutorials say (I am skeptical about that, I think this is what caused my phone to brick. BL obviously stands for bootloader, but I wasn't going to question the experts). Afterwards, I went to restart my phone and now I only boot to a broken Odin mode which says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I cannot turn it off without taking the battery out, it reboots immediately. I tried plugging my phone in and running Kies, but I left it to detect devices for 10 minutes and it was still attempting to connect to my SGS2. I have absolutely no idea what to do, I've never gotten this message in Odin before. It was tricky to even get Kies as Samsung took down their link and replaced it with SmartSwitch. Any help would be greatly appreciated.
idk which tutorial youve read but you should of read mine, it uses odin3v1.87 and only pda is ever used and/or needed for the skyrocket.
u could be sol but trying my tut shouldnt hurt.
if theres life theres a chance for it to be revived.
you could try flashing twrp or better yet a full stock firmware so all partitions get reformatted/repartitioned correctly, fingers crossed.
links in my sig
vincom said:
idk which tutorial youve read but you should of read mine, it uses odin3v1.87 and only pda is ever used and/or needed for the skyrocket.
u could be sol but trying my tut shouldnt hurt.
if theres life theres a chance for it to be revived.
you could try flashing twrp or better yet a full stock firmware so all partitions get reformatted/repartitioned correctly, fingers crossed.
links in my sig
Click to expand...
Click to collapse
Thanks; the only problem is that I can't even flash anything at the moment. My phone needs Kies and the drivers first, the Odin/download and recovery modes cannot be accessed otherwise. Kies has never had my phone drivers beforehand as I never had Kies before my phone had problems I should have looked harder for more detailed tutorials like yours first (one of many oversights that I neglected as a newbie). I also forgot to mention I visited the cm wiki to try to flash a newer custom OS and the tutorial asked for Windows users to use Heimdall suite, which failed to work properly in Windows 10 (at least for me). I used it to install a driver which may have replaced my Kies driver but now that I had uninstalled Kies completely and reinstalled it just after my phone broke, I no longer have a way of getting those drivers back since Kies apparently uses the history of my connected phones to install the drivers. I may be completely wrong (I feel I am) so please correct me.
thers a stand alone usb drivers link in the 1stop thread under the utilities section
vincom said:
thers a stand alone usb drivers link in the 1stop thread under the utilities section
Click to expand...
Click to collapse
Well it's not the drivers. Kies simply won't connect for whatever reason. I've tried Kies emergency recovery but it needs my phone to have been plugged in to another computer somewhere in order to get a recovery code or I need Kies to simply detect my phone. I've installed the new drivers multiple times but it doesn't change any results.
fyi you dont need kies for any of my tutorials.
uninstall kies, restart pc and reinstall standalone usb drivers and restart pc.
then follow my guides to the "t"
vincom said:
fyi you dont need kies for any of my tutorials.
uninstall kies, restart pc and reinstall standalone usb drivers and restart pc.
then follow my guides to the "t"
Click to expand...
Click to collapse
I found your stickies and found a link to the proper .tar.md5 file for the stock rom and it works now. Thanks for the help ^^
same prob
Raeffion said:
I found your stickies and found a link to the proper .tar.md5 file for the stock rom and it works now. Thanks for the help ^^
Click to expand...
Click to collapse
i have the same probleme can you sent me the tuto please and links for the correct solution i727 Galaxy S II Skyrocket (SGH-I727)
ayuda
I format the mobile and now when it starts it stays in the twrp crazy and it blinks it stays like an infinite cycle of blinks and when I put it to load with the engine it starts only to the twrp logo it makes. do not abilite the mode
depuration
usb but if I go to the download mode I need your help thanks

Categories

Resources