Hey guys, does anyone know a tweak where my phone will stop charging at like 99% so that when I charge overnight, it doesn't over charge? Or is this already a feature in many custom kernels such as elementalx
Sent from my Nexus 5 using XDA Free mobile app
It's a feature of the phone itself. Don't worry about it
Sent from my Nexus 5
With all my phones, I've always left them charging overnight. As jd1639 says - they are designed to ensure they are not overcharged. This is both to protect the phone and also not to waste electricity.
I use an old Motorola charger by my bedside which is rated at 500 mah. As it's going to be plugged in for 7 or 8 hours, it might as well charge slowly! It's better for the battery that way - maybe see if you can pick up a lower-rated charger if you want to be extra careful.
surrealjam said:
With all my phones, I've always left them charging overnight. As jd1639 says - they are designed to ensure they are not overcharged. This is both to protect the phone and also not to waste electricity.
I use an old Motorola charger by my bedside which is rated at 500 mah. As it's going to be plugged in for 7 or 8 hours, it might as well charge slowly! It's better for the battery that way - maybe see if you can pick up a lower-rated charger if you want to be extra careful.
Click to expand...
Click to collapse
That's actually worse for the battery, being charged too slowly
Sent from my Nexus 5 using Tapatalk
Ben36 said:
That's actually worse for the battery, being charged too slowly
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I've not heard that anyway, but is 500 mah "too slowly"? That's the output you'll get from a USB drive.
Ah right... Just looked it up. If it's an ac wall charger. It's ok. If it's a usb port they generally give out less voltage (around 4.2-4.5) so your battery won't last as long between charges
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Ah right... Just looked it up. If it's an ac wall charger. It's ok. If it's a usb port they generally give out less voltage (around 4.2-4.5) so your battery won't last as long between charges
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
If the battery is fully charged it shouldn' matter what voltage was used to get there. A full charge is a full charge.
marleyfan61 said:
If the battery is fully charged it shouldn' matter what voltage was used to get there. A full charge is a full charge.
Click to expand...
Click to collapse
This isn't true. A charger only works by applying a voltage to the cable which causes electrons to flow into the battery. The N5 battery is at full charge at 4.2V. If you're charging it with a supply that is running at less than 4.2V it will only charge up to the voltage applied.
Edit: I guess to clarify I should say that you're right that a "full charge is a full charge" but you will never get to a full charge if you are applying too low a voltage. And keep in mind that if your USB port is only providing 4.2A there is a voltage drop across the wire so you would end up with a lower voltage at the battery.
marleyfan61 said:
If the battery is fully charged it shouldn' matter what voltage was used to get there. A full charge is a full charge.
Click to expand...
Click to collapse
That's ampage i think. Ampage will gain with charge. Voltage will always stay the same
Edit -
http://batteryuniversity.com/learn/article/charging_from_a_usb_port
Sent from my Nexus 5 using Tapatalk
Related
Ive seen threads for almost all the wireless chargers except this one, so ive decided to create one to unite all the information.
Ive just ordered it on amazon for 50€.
What is your experience with it guys? Cant wait to recieve it.
Sent from my Nexus 4 using xda app-developers app
I have one here and it works fine, charges my phone with no problem and temperatures never go above 36c. The only two issues I have is firstly the Nexus 4 slides around on this thing like there is a layer of Teflon between the phone and charger. I heartily recommend LEAVING the protective film that the Maxell comes with ON the charger that stops the phone slipping.
Secondly forget about using daydream with the charger, in my experience daydream uses up too much power to be useful with wireless charging. The battery charges at snail pace and the phone heats up to over 45c with daydream enabled. I like the Maxell and I like wireless charging my first choice would be the Nexus Orb if it was available, but the Maxell does a good a job as any.
Thanks for the advice. Will keep maxell plastic on. Wish they could deliver it faster. Will take a month
Sent from my Nexus 4 using xda app-developers app
Just got one of these from eBay for £42. Seems to charge fine with the N4 the S line TPC case on.
My only, albeit minor, issue with it is the bright blue LED which illuminates while charging. This is easily resolved by making sure the N4 covers it or stick a bit of dark tape on top.
Sent from my Nexus 7 using xda premium
I just picked a Maxell Air Voltage charger up from Ebay here in the UK, it is a very nice bit of kit I must say and works great, the only downside is that the charging range isnt too good, I was expecting at least 6mm so that I could charge it whilst it was in my flip case, it wont charge through the flip case and it wont charge through any case that is metal or has a foil liner this of course is fairly obvious.
i am sure some of the thinner plastic half cases and gel cases it will be fine, I think that the Nillkin Fashion Shape Flip Leather Case is also OK with it so I will pick one of those up with it.
I tested the effective range with UK 2 x 1p pieces stacked on top of each other which is 3.0 mm thick in total, so if your case it over 3mm thick then it wont work without taking the phone out of the case, something to think about if you are going to get this charger.
I wouldnt hang on to get the orb charger, thats a long way off IMHO, the Maxell air voltage is a great unit, is cheap and will work with other QI devices, well worth getting it.
Sounds good so far. I've ordered mine off Amazon after hesitating because of the price.. Taking ages to arrive during this holiday season. Looking forward to it.
Had mine for around 2 weeks now, works perfectly with my tpu case on.
Did originally have daydream turned on and it was a little slow but now its off it charges great.
Well worth the money. If they were a little cheaper i'd buy another!
hi,
does it use 110 or 220 voltage?
I also have the Maxell charger of Ebay and it charges through the Nillkin hard case with no issues at all which was a deal breaker for me if it couldn't.
I agree with the comment to leave Daydream off as it seems to charge the phone better..
Sent from my Nexus 4 using xda premium
Just got mine. It got up to 98%, does yours get to 100%?
Sent from my Nexus 4 using xda app-developers app
Mine gets up to 100% although not the first time that I charged it for some reason...
Sent from my Nexus 4 using xda premium
ianm said:
Just got one of these from eBay for £42. Seems to charge fine with the N4 the S line TPC case on.
My only, albeit minor, issue with it is the bright blue LED which illuminates while charging. This is easily resolved by making sure the N4 covers it or stick a bit of dark tape on top.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Cheers mate, I was a bit worried about charging through my S-Line case. I've just ordered one from play. I have a desktop stand, but sometimes the connection doesn't fit in properly.
Got my nillkin case for my n4 which is superb and can confirm the Maxwell does charge through it as the other poster mentioned so it isn't a one off, if the case was a little thicker it won't do it though so be warned
Sent from my Nexus 4 using xda app-developers app
rttnpig] said:
Just got mine. It got up to 98%, does yours get to 100%?
Click to expand...
Click to collapse
Mine is getting stuck at 89%. Then it goes in to a state of limbo where it disconnects, uses up a bit of charge, reconnects, gets back to 89% disconnects, etc etc.
Anyone else? Defective unit?
Also, has anyone else suffered severe battery life deterioration after using this? It may well just be coincidence but about 3 days after first using it my battery life has fallen off a cliff. The Android Kernal OS is suddenly showing up at over 30% usage on the stock battery data page, whereas before it was under 10%.
Working fine with mine no problems. But I find when it charges to 100% it waits until it drops to 95% before recharging again. This is fine as I understand that qi charging doesn't allow for trickle charging, so it's either full power or no power. I wouldn't say it degrades the battery life but rather it screws up the battery stats. To fix this I just plug the usb charger once a week or so.
I think the capacity reading gets messed a bit as due to the on/off charging after reaching full charge, since unlike trickle charging where the battery's voltage is kept constant, the voltage is always raising or falling. Depending on when you take your phone away with you in relation to its current charge state you might get a slightly lower capacity for that particular charge.
Sent from my Nexus 7 using Tapatalk HD
Makaijin said:
Working fine with mine no problems. But I find when it charges to 100% it waits until it drops to 95% before recharging again. This is fine as I understand that qi charging doesn't allow for trickle charging, so it's either full power or no power. I wouldn't say it degrades the battery life but rather it screws up the battery stats. To fix this I just plug the usb charger once a week or so.
I think the capacity reading gets messed a bit as due to the on/off charging after reaching full charge, since unlike trickle charging where the battery's voltage is kept constant, the voltage is always raising or falling. Depending on when you take your phone away with you in relation to its current charge state you might get a slightly lower capacity for that particular charge.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
What im going to do to solve this is buy a electricity temporizator and set it to 3 h so it stops once those hours are done. I always charge mobile at the same hour.
Enviado desde mi Nexus 4 usando Tapatalk 2
Makaijin said:
Working fine with mine no problems. But I find when it charges to 100% it waits until it drops to 95% before recharging again. This is fine as I understand that qi charging doesn't allow for trickle charging, so it's either full power or no power. I wouldn't say it degrades the battery life but rather it screws up the battery stats. To fix this I just plug the usb charger once a week or so.
I think the capacity reading gets messed a bit as due to the on/off charging after reaching full charge, since unlike trickle charging where the battery's voltage is kept constant, the voltage is always raising or falling. Depending on when you take your phone away with you in relation to its current charge state you might get a slightly lower capacity for that particular charge.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Trickle charging is horrible for lithium ion/poly batteries. Unplug from AC charger as soon as you can. LiOn batteries don't like to be at full peak 4.2v for long. It's actually better that many of these Qi chargers are only charging to 89 or 95% of capacity by the wireless charges. It's better for the long life of the battery. Charge them often too. Don't let it go down to 10% or 5%. Put them on the charger when your phone is down to 50% and take them off the charger when they get to 90%. It's easy to do with a wireless charger.
Lakino said:
Trickle charging is horrible for lithium ion/poly batteries. Unplug from AC charger as soon as you can. LiOn batteries don't like to be at full peak 4.2v for long. It's actually better that many of these Qi chargers are only charging to 89 or 95% of capacity by the wireless charges. It's better for the long life of the battery. Charge them often too. Don't let it go down to 10% or 5%. Put them on the charger when your phone is down to 50% and take them off the charger when they get to 90%. It's easy to do with a wireless charger.
Click to expand...
Click to collapse
Source.
Cuz all that contradicts lithium theory.
Sent from my Nexus 4 using xda premium
ptesmoke said:
Source.
Cuz all that contradicts lithium theory.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Batteryuniversity.com
Lakino said:
Trickle charging is horrible for lithium ion/poly batteries. Unplug from AC charger as soon as you can. LiOn batteries don't like to be at full peak 4.2v for long. It's actually better that many of these Qi chargers are only charging to 89 or 95% of capacity by the wireless charges. It's better for the long life of the battery. Charge them often too. Don't let it go down to 10% or 5%. Put them on the charger when your phone is down to 50% and take them off the charger when they get to 90%. It's easy to do with a wireless charger.
Click to expand...
Click to collapse
I'm actually aware that constant trickle charging at full charge isn't ideal for long term health of the battery. Which is why I mentioned I only plug the wired usb charger once a week. I only plug it in for about 30 mins so the voltage stabilises as to help the phone more accurately display its charge % state better. Obviously it's all subjective as I've yet to actually perform any tests to see if it's ture or not.
On the subject of long term battery health, trickle charging on wired may not be ideal, but nor is wireless charging due to heat it produces. During wireless charging, according to my battery stats widget the phone reaches 39°C, while wired usb it never goes above 22°C (room temp. basically). The good thing about wireless charging is the heat drops back down when the battery is full and the qi charger is no longer sending any current. But when the charge drops back down to 95 % it restarts charging again, and the heat returns.
So, which is more harmful to the battery, heat or constant trickle charging? In either cases it's still a good practice to remove the phone from the charger (both wired or wireless) once it's reached full charge.
Sent from my Nexus 7 using Tapatalk HD
This is a continuation of the discussion that was started here. Since I do not want to crowd that thread with an offtopic subject, I am continuing here. I am quoting the relevant posts from that thread also.
unni_kmr said:
One issue bothers me a lot. I cannot use the phone for navigation for more than 2 hours even with car charger connected. In about 2 hours, it drains out fully. My latest theory is that after about 30 mins of charging, the battery starts heating up, and so it stops charging.
Click to expand...
Click to collapse
mtdew said:
User error or bad unit I have zero issues with my GPS or car charging. Also what amperage is your car charger capable of outputting.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
unni_kmr said:
I am not 100% sure in terms of the amperage. But I tried with a car charger capable of charging a laptop, using the wall charger and cable which came with the phone. I was sitting in the passenger seat, phone was in my lap (not mounted in windshield) and Google Maps was running in navigation mode. For the first 15 minutes or so, I saw that the phone was charging. The charge level increased by 1% or 2%. After I think 20 minutes, it stopped charging. CPU-Z app was showing battery status as
health: over heated or heated (don't remember clearly the text)
power source: connected
status: not charging or discharing
Phone's back was very hot. I unplugged the USB cable and connected it back, and it started charging again! I waited for it to cool down, removed the phone case, repeated this and got the same result.
This is why I believe the phone is doing something to protect it from over heating. I am not sure though.
Click to expand...
Click to collapse
mtdew said:
Amperage is important son too little it will discharge, I think it will limit if too much. Nav can cause some heat for some of these guys but I've never heard of it getting that high my guess is something was wrong.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
acejavelin said:
I have gotten my last few chargers at Sam's Club, they are about $10, and are rated at [email protected]
In an older phone I had a similar issue where my phone would overheat and not charge properly, once I got a new charger I cut the end off the old one and read the voltage with a meter, it was putting out almost 7.1v (should be 4.75-5.25vDC for USB 1.0-2.0 standard, and 5.25-5.75vDC for USB 3.0), pretty sure that is what caused it... cheap components equals cheap quality and flaws. Current rating should be irrelevant, as long as it meets the devices minimum requirements (most modern phones are [email protected]), even if a charger is rated at 2, 3, or even 5 amps, the device should not draw more than it can handle. Current is drawn, not pushed, a device will draw the needed current at the expected voltage, you can't really "over-current" a device by using a power source that is rated at the proper voltage but a higher current. Similar instance can occur by using a charger that has too low of a current rating, the device will try to draw more current than the adapter is rated at and the adapter will eventually fail or fall out of specifications.
Some other good chargers are by Anker, PowerGen, or RAVPower, and of course a Samsung branded adapter will work well, most all of these can be purchased for $8-$15 on Amazon. If the adapter is not rated with a current rating, then skip it, it is probably only 600ma-750ma and will be more headache than it's worth in the long run.
Click to expand...
Click to collapse
bps119 said:
Good to see that we're getting a new user who actually does their homework. :thumbup:
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
technoid1964 said:
The Skyrocket (and several other Samsung phones) need special "type 2" chargers. Apple charges are type 6, so if it says compatible with Apple, don't use it as it may not work. If the two center pins on the USB port doesn't have a 50 ohm resistor across them (or not shorted) , the Skyrocket will only draw 350 mA. Samsung and older Curve BlackBerry chargers have the resistor. At 350 mA, the phone draws more than the charger is providing, and the charger circuitry heats up trying to keep up with demand.
Jrockttu has a great thread under General called "Fix your Skyrockets battery life"
I've MOD'd all of my chargers, now my phone is happy with the screen on all day while driving and it stays charged, or charges slowly...
Tim
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
To eliminate the possibilities mentioned above, I bought the following:
1. Car Charger: PowerGen Black 3.6Amps / 18W Dual USB Car charger
2. USB Cable: Mediabridge USB Charging Cable
I also installed this app (Skyrocket Charger Info).
Summary of what happened:
With new car charger: Fast Charge (A/C) - Charging at 898 ma
With old car charger: Charger Wakelock - Charging at 497 ma
When connected to mains using factory charger: Fast Charge (A/C) - Charging at 898 ma
When connected to PC USB port: Slow Charge (USB) - Charging at 497 ma
Even with this new charger, phone stops charging once it heats up.
The full story:
Once I plugged in the phone to the new car charger using the new USB cable, the app showed the charging current as "Fast Charge - Charging at 898 ma". This is the same mA value it shows when I plugin into the mains with the phone's factory charger. I drove around with maps for around 15 minutes. Once I stopped, I saw that charge level had dropped by around 9%. I immediately launched CPU-Z app. It was showing battery overheated & not charging (see attachment 1). The phone was hot.
I removed the charger. After I think 1 minute, the battery status became 'good'. I plugged in the charger again. It started charging. While I was looking at the CPU-Z screen, battery status changed from 'good' to 'overheated' and 'charging' to 'not charging'.
Attachments:
(Please note that these screenshots are from another test where I had driven for around 30 minutes, and is not based on the above story.)
1. Phone state once I stopped the car. Charger is connected, but phone is not charging. Note that ignition is on.
2. After removing the charger.
3. After connecting the charger again. Within a few seconds of taking this screenshot, it changed to what is shown in attachment 1.
So I guess I can't do much about this, right?
I can't remember if you replaced the battery or not.... That could also be any issue if it's getting old and can't absorb the charge as fast as it used to... It will heat up quicker.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
How old is your battery? And how many times a day do you plug it in?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Sorry. I somehow missed your replies.
technoid1964 said:
I can't remember if you replaced the battery or not.... That could also be any issue if it's getting old and can't absorb the charge as fast as it used to... It will heat up quicker.
Click to expand...
Click to collapse
I will try to purchase a new battery if its not too costly.
hotbyz168 said:
How old is your battery? And how many times a day do you plug it in?
Click to expand...
Click to collapse
My phone and battery are now 18 months old. When I am in office, I charge it twice. It doesn't drain much, but I keep it fully charged just before leaving office.
Phone can overheat when under direct sunlight with GPS, screen and CPU working (the most power-consuming activity on the phone happens to be navigation), and also charging. Nothing unusual in that - its internal temperature in this case can reach beyond 100 degrees C. The battery can't charge when above 60-70 degrees C, because it can get physically damaged or even explode.
Concealing the phone from direct sunlight might work.
Limiting the CPU frequency might work.
A new battery might work.
I read a post here and I didn't quite understand which charger should I buy for a quick charge.
Appreciate the help.
The one that came with the phone.
The phone will only take in what it needs.
This phone charges the fastest I have ever witnessed on AC obviously.
guy6136206 said:
I read a post here and I didn't quite understand which charger should I buy for a quick charge.
Appreciate the help.
Click to expand...
Click to collapse
only use the charger given with the box cause they have settled some voltage parameters according to phone's battery ...so dont go for any other charger ...it might heat up your battery or any wrong can be happen to u ....
bro it is 2300 mah battery so it takes time to fill up some juice into battery ...
dont worry
Sent from my Nexus 5 using Tapatalk
Any 2 amp charger will work. 1 amp chargers will work too but won't charge as quickly.
Sent from my Moto X
http://www.androidbatterylife.com/2013/12/easy-pick-correct-charger.html
rahil3108 said:
only use the charger given with the box cause they have settled some voltage parameters according to phone's battery ...so dont go for any other charger ...it might heat up your battery or any wrong can be happen to u ....
bro it is 2300 mah battery so it takes time to fill up some juice into battery ...
dont worry
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
All (good) USB chargers are going to charge at the same 5V as the Nexus 5 charger. Any charger from another phone will work without issue, but if it's under 1.2A it will charge more slowly (many are 1A). Just don't buy a cheap, poorly made charger and you'll be fine.
aavvaallooss said:
http://www.androidbatterylife.com/2013/12/easy-pick-correct-charger.html
Click to expand...
Click to collapse
The major assumption here that a slower charge leads to a higher run time is not true.
http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries
A slower charge leads to the saturation charge phase taking less time while the constant current phase takes longer. The battery in the Nexus 5 and the accompanying 1.2A charger is meant to give you the quick 70% charge that is discussed in the BU article and then trickle charge during the saturation charge. If you're charging overnight it doesn't matter which method you use, you'll still reach 100% around the same time and the runtime will be the same.
Tnx everyone, I have the original chargr but I lost is cable.
I tried many cables but that just are not fast enoug.
Any idea where I can buy one?
Is it real?
Is it effective?
Sent from my Nexus 5 using Tapatalk
peeweew said:
Is it real?
Is it effective?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
What does this thread even mean?
Trickle charging has been around for years. All it means is that once a device is charged to 100%, the charger will allow the device to discharge a tiny bit, then will top it off that tiny bit, and then rinse and repeat. Obviously it's effective because if your phone charges to 100%, you don't have to unplug it immediately. You can just leave it on the charger and it will stay at 100%.
Trickle charging
peeweew said:
Is it real?
Is it effective?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
A trickle charge is a charge at a very low current.
Trickle charging is when the battery is charged at a low rate. It's actually the best way to charge a battery although it takes longer.SO ITS 100% EFFECTIVE & REAL:good:
I'm thinking out of picking up the Incipio battery mod. I normally plug in with about 30% left but after my research on prolonging battery life, I'm realizing the battery mod might actually extend the life of the Z Force battery.
Any ways, the point/question is: do you leave the mod always attached and charge it at night (or when you need to)? Or do you only attach the mod when your battery hits a certain percentage?
So far I only lose about 20% during a day. I know that's not much but I'm connected to a 4g network extender so I don't search for a signal.
To answer your question the first day I had the battery mod I set it in efficiency mode and just slapped it on. That sets the mod battery to kick in when the phi e battery hits 80%. It worked like a charm. At the end of the day my mod was at 70%.
I only used it the first day and since then it's just been sitting there charged. But I try to not let my battery fall below 70-80%.
Sent from my XT1254 using XDA Free mobile app
I leave my tumi battery mod connected all of the time.
Sent from my XT1650 using Tapatalk
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
For the record, the Tumi, Kate Spade, and Incipio should all behave identically...as they are all made by Incipio...the only differences between the 3 are looks...and price
Sent from my XT1650 using Tapatalk
edneum2 said:
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
This.
I want to be able to use my phone as it was meant to be used without thinking about battery life later in the day.
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
The wireless charging capable Tumi mod only charges via wireless. It will NOT charge through the phone.
Obviously when wireless charging it will charge both the mod and phone. When wired charging it only does the phone and not the mod.
However the non-wireless one does charge the mod when charging via wire (I tested it).
Sent from my XT1650 using Tapatalk
JasonJoel said:
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
Click to expand...
Click to collapse
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
HotShotAzn said:
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
Click to expand...
Click to collapse
Not true, I have the Tumi wireless mod: wired & wireless both charge mod & phone.
I have two of both models of Tumi in front of me, and I am 100% sure neither of the wireless models will charge through the phone when it is connected via USB. Not sure why yours is different...
To be clear both of the non-wireless models I have DO charge through the phone when connected via USB...
Sent from my XT1650 using Tapatalk
I have the incipio wireless charging battery pack, can confirm it does charge when the phone is connected with usb.
I wonder if it matters if the mod is in 'efficiency mode' or not... I didn't think so from previous testing, but I'll check that tomorrow.
Edit: I have been using another usb-c cable/charger, not the 'turbo 30' one that came with the phone... That may be the difference. I'll test tomorrow.
Sent from my XT1650 using Tapatalk
So I'll have to apologize. I charged one of the phones with the usb charger that came with the phone, and it DID charge both the phone and mod.
So I must have something else going on with my setup at work, as it definitely does NOT there (even after being plugged in for hours) ...
Sorry for the confusion, and misinformation!
Sent from my XT1650 using Tapatalk
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
I bought my wife the Kate Spade battery pack and it officially died as a result of using a Droid Turbo 1 charger for her nightly charge. The first week or two, it charged just fine throughout the night. Now, however, it won't charge, even on the stock charger (although it will sometimes glitch out and say there is a 97% charge while still not supplying juice to the phone).
I have the Tumi with wireless charging, and I definitely prefer being able to charge it without the phone attached. As for my wife's, Big Red said that they offer a 1 year warranty on accessories, so I'll be able to take the dead one in for an exchange.
Word to the wise: use the stock charger whenever charging your phone with a non-wireless charging model of the battery packs attached. Wireless charging seems to work just fine, every night.
Sent from my XT1650 using Tapatalk
Ace2cool said:
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
Click to expand...
Click to collapse
Actually I get my battery mod to charge using the Verizon branded usb c fast charger. I made sure it worked in a store before I bought it. It does pop up saying turbo charging also. It is not as fast as the Motorola charger. I use Ampere to test them. The Verizon charger is about 2200 and the Motorola one is about 5700. But that and the supplied charger are the only ones that will work to charge the mod. I got screen shots somewhere. I'll try to post them.
Sent from my XT1254 using XDA Free mobile app
The screen shot with the white background shows the supplied Motorola charger.
The screen shot with the white background is the Verizon branded USB C fast charger.
Hope this helps. I've tried using about 15 different chargers and these were the only 2 that would charge the battery mod. That's not to say there's not other ones out there that will do it. Just sharing what I've found.
Sent from my XT1650 using XDA Free mobile app
I had the Tumi wireless battery mod. Changed it to the Incipio wireless battery mod. heres what I have found. Both will charge wireless. They will not however charge using any chargers, while connected to phone, without using the supplied charger or the verizon branded usb c fast charger. Both just sit there with any other charger saying waiting to charge.
I spent more time than ill admit to speaking to verizon tech support, motorola tech support, tumi tech support and incipio tech support verifying this.
Yes any charger will charge the phone. but it needed to turbo charge to be able to switch to charging the battery mod. Ive tried about 10 different chargers to test this. QC 2.0 chargers from the turbo chargers wont charge the battery mods.
I use a generic QC 2.0 charger at home, work, and in the car. All three charge the Tumi mod and the phone. Also use a wireless charger plugged into my computer which charges both. I don't think I've even unwrapped the charger that came with the phone.
It is strange how some chargers work and some don't. I have 5 usb-c chargers, 2 work and 3 don't.
Sent from my XT1650 using Tapatalk