Related
Hello everyone I'm in the dinc2 forums. I'm a marine and the other day I was showing a guy I work with my s-off rooted dinc2 running miui and he immediately was interested. He has the inspire and I was looking for a little know-how on what to do and we don't really have the time to search religiously due to work. He's running stock 2.3.3 any help would be appreciated if you want to email me my email is [email protected]
Thanks!
Linch89 said:
Hello everyone I'm in the dinc2 forums. I'm a marine and the other day I was showing a guy I work with my s-off rooted dinc2 running miui and he immediately was interested. He has the inspire and I was looking for a little know-how on what to do and we don't really have the time to search religiously due to work. He's running stock 2.3.3 any help would be appreciated if you want to email me my email is [email protected]
Thanks!
Click to expand...
Click to collapse
Ace Hack Kit
That will walk you through the root/s-off/unlock process. It's been VERY much simplified over time, now it's just a 1 step process. Read the effen manual a few times before you start - but like I said, at this point it's very straight-forward.
Once installed hit up the MIUI thread. Basically you'll download the ROM to your SD, boot to recovery, perform a wipe, and flash the ROM
And thank you for your service and dedication to this wonderful country of ours!
He said the adb drivers won't connect
Any specific error messages? At what point is this happening? Is he trying to run the hack kit or just trying to access an ADB shell?
The hack kit contains all necessary adb files/drivers
Make sure he's done all of this:
Make sure HTC USB Drivers for Android are installed (included in the Hack Kit @ tools/windrivers)
Disable all malware detection, including Windows Defender
Uninstall HTC Sync
Uninstall Droid Explorer
Uninstall iTunes or stop service
Uninstall Other phone pda or tablet software
We just tried on our lunch we disabled everything the HTC drivers were already installed with sync uninstalled. We were at the pre-step where you run the command as an admin and the command window comes up for a second and closes itself. Does his phone need temp root to run the kit?
trouble rooting my phone
when i run the hack as admin on windows 7 it give an error message this is what the error message says
check adb connectivity
shad0fox04/2011
service not running
error error error
phone not plug in or driver not installed or usb debugging not enable
error error error
pres any key to continue the it just cut off i checked all of that and everything is good to go so what is the problem lol
did u ever find out y adb wont connect im having d same problem
Linch89 said:
We just tried on our lunch we disabled everything the HTC drivers were already installed with sync uninstalled. We were at the pre-step where you run the command as an admin and the command window comes up for a second and closes itself. Does his phone need temp root to run the kit?
Click to expand...
Click to collapse
Did you install the drivers that came with the kit just to be safe?? I just did this like 2 days ago and it worked perfect..
Linch89 said:
We just tried on our lunch we disabled everything the HTC drivers were already installed with sync uninstalled. We were at the pre-step where you run the command as an admin and the command window comes up for a second and closes itself. Does his phone need temp root to run the kit?
Click to expand...
Click to collapse
Has he by any chance tried a different USB port? And is the phone in charge only mode, it's not mounting itself as a disk drive automatically? I don't know how feasible it might be, but if he has another computer available try running it there and see if you get any different results. At least then we might be able to narrow down better whether it's the software, the computer, or the phone.
jonathanj942 said:
when i run the hack as admin on windows 7 it give an error message this is what the error message says
check adb connectivity
shad0fox04/2011
service not running
error error error
phone not plug in or driver not installed or usb debugging not enable
error error error
pres any key to continue the it just cut off i checked all of that and everything is good to go so what is the problem lol
Click to expand...
Click to collapse
Another simple thing that I have to ask about...you guys did extract all the contents of the hack kit somewhere on your computer, correct? You're not trying to run it from the .zip?
If it is extracted,
go to the tools\win\ directory.
Hold Shift and Right-Click in an empty spot, select "open command window here"
type "adb devices" and hit Enter
You should see 12 alpha-numerics listed under "List of devices attached"
If you don't see anything under this, then for some reason adb isn't recognizing your phone is plugged in. In which case I'd try a different USB port or computer
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
... weird... I didn't do anything differently I just kept running the .bat over and over again and eventually it moved on to the next steps.....
Open a command prompt and get into the directory you saved it in and run it from there. Worked for me that way after having the same issue as you.
MooreHeat said:
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
Click to expand...
Click to collapse
I had the exact same problem with the window closing and all you have to do is run it through a command prompt and It will work fine
sent from My Own Galaxy
if you're using debugfs method, I've read it doesn't play nice if you have Android SDK and ADB installed on your PC. It contains everything needed. Somehow, haveing ADB A-SDK causes some weird conflict/error. I'm not aware if this has been resolved.
Ya I figured it out... I actually didn't need to run it through cmd prompt... it just finally worked... lol
Sent from my SGH-I747 using xda app-developers app
http://www.youtube.com/watch?v=JmvCpR45LKA
I have seriously searched EVERY DAMN INCH of the Internet for this. Okay, obviously, I've seen all the posts like this one:
http://forum.xda-developers.com/showthread.php?t=2351390 (I actually wanted to reply there but can't, sad)
And I've done all those steps, I've uninstalled everything, I've reinstalled everything, I've called my mom to tell her she wasn't lying to me about me being special, I've done it all ten times. This is what happens:
System stuff: Windows XP, cyanogenmod 10, ADB and Apps set to root, USB debugging on, Android 4.2.2, latest Android Commander, Galaxy S3 Sprint, Android Debug Bridge version 1.0.31
I open cmd and type adb devices, it shows me a device is available:
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
ba0a8be4 device
I open Android Commander, it has a blank line that's highlighted blue, I click "OK", it says:
Connected device has status offline and cannot be used. Please reboot your device.
I reboot my device, same thing happens.
Does anyone have any ideas? I'm seriously about to just flash it to 421 but I hate just giving up. I hate it almost as much as I hate asking for help. I spent 7 hours last night (I was up until 2am!!) and then another 4 or 5 today just trying to figure this out. I'm completely lost here. Oh, another thing, since I'm at it, does anyone know how to delete the saved RSA key from my phone? I looked in that data/adb place that link said and renamed it but it didn't seem to reset the key... maybe I need to restart, I'll try restarting after I rename it. Yep, I bet that'll work. It probably had it in memory. Anyway, pointless rant about RSA done. I hope someone has some ideas before I resort to just sitting in the corner, cuddling up with my phone, and crying until my mommy tells me I'm special.
Another possibly important thing is that Droid Explorer works briefly (I can see phone's files come up) but then crashes when I try opening anything.
It also, as I was just playing with it, seems like Android Commander causes the adb server to become outdated. Does that mean anything? I just ran adb devices, then tried AC, then did adb dev again and it needed to restart the service. I don't know if that means anything. Just something I noticed.
Oops I had to update the link, I just realized I copied the wrong one from the page suggestions it does. This now has the one I meant.
Did you find a solution? I am having the same problem.
I gave up. Flashed stock, then cm 10 with system and cache wipes then cm 10.1 without wiping system. Haven't tried with my computer since I mostly use my phone. I'll check later and update this and let you know. I would have just kept stock but my god that stuff sprint puts on sickens me......
I found a solution and it works.
http://forum.xda-developers.com/showpost.php?p=40276190&postcount=1488
Yeah, I even said in my message that I made sure that was up to date. I was able to connect to adb and see it show up as a device now but Android Commander doesn't work. I did find out that adb push (and I assume pull) works but that probably worked before and I just didn't try. Anyway, I'm not too concerned. Glad you got yours figured out.
Hope this helps!
I managed to get android commander to work by installing the latest adb with the sdk manager and then I copied adb.exe, AdbWinApi.dll and AdbWinUsbApi.dll to the bin folder located where ever you install android commander!
lukesheardown said:
I managed to get android commander to work by installing the latest adb with the sdk manager and then I copied adb.exe, AdbWinApi.dll and AdbWinUsbApi.dll to the bin folder located where ever you install android commander!
Click to expand...
Click to collapse
Copying the adb files to the bin directory worked for me, thanks!
Wow the threads make it look so easy but here are my steps so far and I'm a couple hours into S-Off but had to go through all this stuff (The basics I guess but this is my first time on android 4.4 so I was pretty lost.
1) First I found the XDA Developer link here which has a QR code to scan to download the file.
2) Realized I did not have a QR Scanner installed so I installed google goggles.
3) Scanned the code and realized it did not work and simply takes me to the xda developers forum
4) Searched for another link and found this one http://dottech.org/156395/how-to-roo...verizon-guide/ (This QR code works)
5) downloaded and installed the weaksauce exploit.
6) Decided I will backup my data on the phone before continuing .
7) Installed titanium backup
8) Was told to enable USB debugging
9) Found this can only be enabled if your phone has development mode enabled.
10) Searched for how to do that on this newest version of android and found this link. http://www.pcadvisor.co.uk/how-to/go...formance-mode/ which I was able to figure out the exact steps for the M* on my own.
11) In the newly unlocked developer options from the enabled USB debugging.
12) Titanium backup reminded me I do not have the paid version (but I do own a licesnse!) Need to copy the license file to the SD card.
13) Realized I don't have an external SD card installed.
14) Searched the house for a paperclip to pop out the SD card slot, no dice... Found a needle and trimmed the head off it with wire cutters, and popped out the door.
15) Installed the SD card!
16) Titanium backup says it cannot write to the external SD card (Well this is where I like to keep my backups not on the internal Card....)
So Starting from 18 how do I:
1) Use titanium backup to backup to my external SD card (No write permission). I have tried the SDFix application and that did not work. How do i get write permission to backup with titanium backup?
2) Where do I download the HTC M8 Drivers?
Ok so I guess I cannot backup the phone, lets say I will just skip the backup.
I'm trying to S-Off using the weaksauce method. I go to the folder where I downloaded firewater and type adb reboot and I get a message that my device is unauthorized..
What now?
Did you look here ? http://forum.xda-developers.com/showthread.php?t=2708628
Works great.
You can just use internal storage for your backup, once you get the phone s offed . Then do a backup to the external sd card. You need root access and a kernel without write protection. Take your time, it'll work.
Sent from my Nexus 7 using XDA Premium 4 mobile app
I would recommend watching some of these videos, they are very helpful.
http://forum.xda-developers.com/showthread.php?t=2697957
+1 on the videos well worth watching!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Did you get it figured out? If you didn't and still need some help, send me a PM and I'll walk you through step by step and help you get it done. I've walked three people through the S-OFF method now (using Teamviewer and chat) and am getting pretty efficient at it. Shoot me a PM if your still stuck.
Watch this...
https://www.youtube.com/watch?v=sLtmwN1UyUU
I'm having the exact same problem. I rooted the phone thinking that's all I'd need to do. But with TiBu I can't backup to my SD card. So now I'm trying to do the S-Off so I can solve that problem. But I can't get the adb to work either.
I installed the HTC Sync Manager "package" from HTC, which allegedly comes with the driver. But, when I plug the phone into the computer it doesn't even see an adb device for my phone. I'm familiar with adb devices because I used it on my Droid Bionic.
Then I downloaded what has been nicknamed the "HTC One Toolkit M8" and installed the "Universal Adb Driver" from that. Still, no adb device is detected. Frankly, I'm laughing and disgusted with this phone. I'm laughing because someone with my prior skills with android should have no problem with this. But disgusted because this phone has been the most counter-intuitive phone I've ever owned. Just trying to disable the lock screen took almost 30 minutes.
Anyone know what I'm doing wrong? When I plug the phone in right now it shows up under "Portable Devices" and that's it. My Bionic would pop up 3 devices(CD-ROM, media device or something of that sort and the adb device).
I've literally spent the last hour searching with Google trying to figure out what I'm doing wrong. I thought it was a driver problem, but now that I'm not seeing any "unknown" devices nor am I seeing the adb device I'm convinced I've screwed this up somehow.
Yay me. I can't find my old account info, so 1 post for me.
Edit: Also, after installing the "Minimal ADB and Fastboot" as well as the Android SDK, the command "adb devices" has never found my phone. LOL
Just an FYI...the tool to open the SD card slot comes with the phone. It's the metal piece with the HTC logo in the packaging that the manuals come in. You'll have to pull that part of the box apart to get it out.
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Click to expand...
Click to collapse
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
robocuff said:
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Click to expand...
Click to collapse
I don't. I haven't gotten that far since I haven't gotten s-off done.
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Joshy8 said:
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
I don't. I haven't gotten that far since I haven't gotten s-off done.
Click to expand...
Click to collapse
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
robocuff said:
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Click to expand...
Click to collapse
Windows 8 doesn't have any problems with adb. I've used it flawlessly on several computers. USB 3.0 neither. USB 3.0 can however cause problems with Firewater running correctly.
nicholi2789 said:
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
Click to expand...
Click to collapse
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know, I have had lots of driver issues on lots of devices and had to sort it out many times. Most notably was my Nexus 7 that thing was the hardest device to get drivers installed for, it took me hours. I've gotten pretty dang efficient at installing drivers nowadays though. I need more specific information about your set-up before I can really offer good advice though. The HTC Media Cd rom that you see pop up when you plug in is the CDROM.iso. It's just stupid HTC bloatware crap, you can disable it or delete it once you have root. When you plug it in you should see the CDROM popup on your desktop then it should mount as MTP too. You should be able to browse your internal and external storage.
One thing I would suggest though and you may think i'm crazy for it.. Swap the USB cable your using for a different one and try that on a different usb port. I've messed around trying to get drivers installed for hours, only to switch the USB cord and have it work just fine. I've even had this problem with brand new USB cords.
If you do still need help tomorrow don't hesitate to shoot me a PM, I would be glad to help.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
hager03 said:
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
Click to expand...
Click to collapse
Haha. I wont' ask. Thanks for the tip, but I am doing adb devices. It comes back and says something like "List of devices found" or something and then is blank. Of course, it works just fine on my Bionic.. haha. It's always listed.
This is going to be a silly question, but did you turn on USB Debugging in the developer options? Does the phone say USB debugging connected on the phone's notification tray?
You should either have unknown device or you should see it listed properly in device manager.
I would go through device manager and uninstall any devices related to the phone. When prompted I would also remove the drivers. Then follow the below guide.
http://forum.xda-developers.com/showthread.php?t=2742295
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.