Related
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
... weird... I didn't do anything differently I just kept running the .bat over and over again and eventually it moved on to the next steps.....
Open a command prompt and get into the directory you saved it in and run it from there. Worked for me that way after having the same issue as you.
MooreHeat said:
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
Click to expand...
Click to collapse
I had the exact same problem with the window closing and all you have to do is run it through a command prompt and It will work fine
sent from My Own Galaxy
if you're using debugfs method, I've read it doesn't play nice if you have Android SDK and ADB installed on your PC. It contains everything needed. Somehow, haveing ADB A-SDK causes some weird conflict/error. I'm not aware if this has been resolved.
Ya I figured it out... I actually didn't need to run it through cmd prompt... it just finally worked... lol
Sent from my SGH-I747 using xda app-developers app
A few days ago I've tried using ADB but it said my device is offline. Earlier I tried ADB over network. Again, it said my phone is offline. So I wanted to see if I can get ADB access from the bootloader. Surprize: I can't get into the bootloader. If I turn my phone off and press Volume Down + Power, it just boots.
Now, my phone is working good, I just wanted adb access to do that darn EFS backup. And what's up with that "can't get into bootloader" stuff? I did it fine and dandy when I rooted my phone..
EDIT: well, since I can not do the backup the normal way, I just downloaded the efs folder as a zip. and dev/block/. Is it as effective as the normal way?
andrei1015 said:
A few days ago I've tried using ADB but it said my device is offline. Earlier I tried ADB over network. Again, it said my phone is offline. So I wanted to see if I can get ADB access from the bootloader. Surprize: I can't get into the bootloader. If I turn my phone off and press Volume Down + Power, it just boots.
Now, my phone is working good, I just wanted adb access to do that darn EFS backup. And what's up with that "can't get into bootloader" stuff? I did it fine and dandy when I rooted my phone..
EDIT: well, since I can not do the backup the normal way, I just downloaded the efs folder as a zip. and dev/block/. Is it as effective as the normal way?
Click to expand...
Click to collapse
It is Vol-Up + Power for bootloader. And you can't have adb access in bootloader mode. Only fastboot access.
Ok but why isn't adb working? Why does it always say it's offline?
Sent from my Google Nexus S
andrei1015 said:
Ok but why isn't adb working? Why does it always say it's offline?
Sent from my Google Nexus S
Click to expand...
Click to collapse
It could be that you installed some software/driver that overrides a working USB driver.
Try install Google USB driver from Android SDK Tools.
Install Android SDK Tools
When SDK Manager runs, select Google USB Driver, see attached pic
If missed, run SDK Manager again as Administrator
Also, make sure you turn on Developer options and "check" Andoid (USB) debugging option in Developer options setup.
_android_ said:
It could be that you installed some software/driver that overrides a working USB driver.
Try install Google USB driver from Android SDK Tools.
Install Android SDK Tools
When SDK Manager runs, select Google USB Driver, see attached pic
If missed, run SDK Manager again as Administrator
Also, make sure you turn on Developer options and "check" Andoid (USB) debugging option in Developer options setup.
Click to expand...
Click to collapse
Yup, I have all of the above.. Still offline >.<
andrei1015 said:
Yup, I have all of the above.. Still offline >.<
Click to expand...
Click to collapse
Do you have the Samsung Galaxy Nexus ADB interface showing in your device manager?
Try uninstall and reload again.
Almost = https://dl.dropbox.com/1/view/xiulpm329s4wxcd/Apps/CloudShot/shot_25022013_192328.png
Still it says offline.
(thank you for trying to help me )
In fastboot mode it looks like this:
just tested at work and it says "device" instead of "offline" which is good I think. The only difference is that at work I installed the SDK long after I got it at home and it has a slightly different folder structure and it also comes with eclipse.
Resolved. Downloaded the new SDK with ADT from the android site and it works. Please forgive me for posting so many times. Can someone please delete this thread?
andrei1015 said:
Resolved. Downloaded the new SDK with ADT from the android site and it works. Please forgive me for posting so many times. Can someone please delete this thread?
Click to expand...
Click to collapse
Good for you.
Anyway, if you followed post #4 and installed the new SDK Tools, would have saved you a lot of time.
Wow the threads make it look so easy but here are my steps so far and I'm a couple hours into S-Off but had to go through all this stuff (The basics I guess but this is my first time on android 4.4 so I was pretty lost.
1) First I found the XDA Developer link here which has a QR code to scan to download the file.
2) Realized I did not have a QR Scanner installed so I installed google goggles.
3) Scanned the code and realized it did not work and simply takes me to the xda developers forum
4) Searched for another link and found this one http://dottech.org/156395/how-to-roo...verizon-guide/ (This QR code works)
5) downloaded and installed the weaksauce exploit.
6) Decided I will backup my data on the phone before continuing .
7) Installed titanium backup
8) Was told to enable USB debugging
9) Found this can only be enabled if your phone has development mode enabled.
10) Searched for how to do that on this newest version of android and found this link. http://www.pcadvisor.co.uk/how-to/go...formance-mode/ which I was able to figure out the exact steps for the M* on my own.
11) In the newly unlocked developer options from the enabled USB debugging.
12) Titanium backup reminded me I do not have the paid version (but I do own a licesnse!) Need to copy the license file to the SD card.
13) Realized I don't have an external SD card installed.
14) Searched the house for a paperclip to pop out the SD card slot, no dice... Found a needle and trimmed the head off it with wire cutters, and popped out the door.
15) Installed the SD card!
16) Titanium backup says it cannot write to the external SD card (Well this is where I like to keep my backups not on the internal Card....)
So Starting from 18 how do I:
1) Use titanium backup to backup to my external SD card (No write permission). I have tried the SDFix application and that did not work. How do i get write permission to backup with titanium backup?
2) Where do I download the HTC M8 Drivers?
Ok so I guess I cannot backup the phone, lets say I will just skip the backup.
I'm trying to S-Off using the weaksauce method. I go to the folder where I downloaded firewater and type adb reboot and I get a message that my device is unauthorized..
What now?
Did you look here ? http://forum.xda-developers.com/showthread.php?t=2708628
Works great.
You can just use internal storage for your backup, once you get the phone s offed . Then do a backup to the external sd card. You need root access and a kernel without write protection. Take your time, it'll work.
Sent from my Nexus 7 using XDA Premium 4 mobile app
I would recommend watching some of these videos, they are very helpful.
http://forum.xda-developers.com/showthread.php?t=2697957
+1 on the videos well worth watching!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Did you get it figured out? If you didn't and still need some help, send me a PM and I'll walk you through step by step and help you get it done. I've walked three people through the S-OFF method now (using Teamviewer and chat) and am getting pretty efficient at it. Shoot me a PM if your still stuck.
Watch this...
https://www.youtube.com/watch?v=sLtmwN1UyUU
I'm having the exact same problem. I rooted the phone thinking that's all I'd need to do. But with TiBu I can't backup to my SD card. So now I'm trying to do the S-Off so I can solve that problem. But I can't get the adb to work either.
I installed the HTC Sync Manager "package" from HTC, which allegedly comes with the driver. But, when I plug the phone into the computer it doesn't even see an adb device for my phone. I'm familiar with adb devices because I used it on my Droid Bionic.
Then I downloaded what has been nicknamed the "HTC One Toolkit M8" and installed the "Universal Adb Driver" from that. Still, no adb device is detected. Frankly, I'm laughing and disgusted with this phone. I'm laughing because someone with my prior skills with android should have no problem with this. But disgusted because this phone has been the most counter-intuitive phone I've ever owned. Just trying to disable the lock screen took almost 30 minutes.
Anyone know what I'm doing wrong? When I plug the phone in right now it shows up under "Portable Devices" and that's it. My Bionic would pop up 3 devices(CD-ROM, media device or something of that sort and the adb device).
I've literally spent the last hour searching with Google trying to figure out what I'm doing wrong. I thought it was a driver problem, but now that I'm not seeing any "unknown" devices nor am I seeing the adb device I'm convinced I've screwed this up somehow.
Yay me. I can't find my old account info, so 1 post for me.
Edit: Also, after installing the "Minimal ADB and Fastboot" as well as the Android SDK, the command "adb devices" has never found my phone. LOL
Just an FYI...the tool to open the SD card slot comes with the phone. It's the metal piece with the HTC logo in the packaging that the manuals come in. You'll have to pull that part of the box apart to get it out.
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Click to expand...
Click to collapse
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
robocuff said:
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Click to expand...
Click to collapse
I don't. I haven't gotten that far since I haven't gotten s-off done.
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Joshy8 said:
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
I don't. I haven't gotten that far since I haven't gotten s-off done.
Click to expand...
Click to collapse
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
robocuff said:
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Click to expand...
Click to collapse
Windows 8 doesn't have any problems with adb. I've used it flawlessly on several computers. USB 3.0 neither. USB 3.0 can however cause problems with Firewater running correctly.
nicholi2789 said:
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
Click to expand...
Click to collapse
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know, I have had lots of driver issues on lots of devices and had to sort it out many times. Most notably was my Nexus 7 that thing was the hardest device to get drivers installed for, it took me hours. I've gotten pretty dang efficient at installing drivers nowadays though. I need more specific information about your set-up before I can really offer good advice though. The HTC Media Cd rom that you see pop up when you plug in is the CDROM.iso. It's just stupid HTC bloatware crap, you can disable it or delete it once you have root. When you plug it in you should see the CDROM popup on your desktop then it should mount as MTP too. You should be able to browse your internal and external storage.
One thing I would suggest though and you may think i'm crazy for it.. Swap the USB cable your using for a different one and try that on a different usb port. I've messed around trying to get drivers installed for hours, only to switch the USB cord and have it work just fine. I've even had this problem with brand new USB cords.
If you do still need help tomorrow don't hesitate to shoot me a PM, I would be glad to help.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
hager03 said:
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
Click to expand...
Click to collapse
Haha. I wont' ask. Thanks for the tip, but I am doing adb devices. It comes back and says something like "List of devices found" or something and then is blank. Of course, it works just fine on my Bionic.. haha. It's always listed.
This is going to be a silly question, but did you turn on USB Debugging in the developer options? Does the phone say USB debugging connected on the phone's notification tray?
You should either have unknown device or you should see it listed properly in device manager.
I would go through device manager and uninstall any devices related to the phone. When prompted I would also remove the drivers. Then follow the below guide.
http://forum.xda-developers.com/showthread.php?t=2742295
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.
Hi,
To make to perfectly clear I am not a developer and my understanding of such issues should be classed as "novice" but I have done a lot of reading up and believe I now need to post a question regarding my problem.
Here goes...
I bought a 32gb off Amazon before Christmas which arrive with 4.4.4. I assumed after a few days of running it would update itself to Lollipop but to no avail, no matter how many times I "checked for updates". I now believe this is probably due to it being a Japanese import. I suspect this as this is on the barcode sticker and the Android with the hatch open logo in recovery has Japanese text underneath.
Anyways I posted a few questions on the Google community and they have basically told me to sit tight as the update is still rolling out. Seems to me that I could be waiting forever so I started to look at doing the manually install myself, remember I'm a amateur here...
I successfully downloaded the ADK file from Google and, even though this came with the USB drivers, I downloaded these seperatly too. I've since deleted the duplicate files.
The problem I am getting is I cannot get the USB drivers to install for when the phone is in USB debugging mode. When I put the phone into both PTP and MTP mode I can direct the driver location towards the folder and everything works OK, when its debugging mode it says they cannot be installed. I think its important to note that I am using Windows XP.
I've tried removing, restarting and reinstalling but to no avail.
Suspect its an XP thing, how do I get around this?
Thanks in advance!
iainwith2is said:
Hi,
To make to perfectly clear I am not a developer and my understanding of such issues should be classed as "novice" but I have done a lot of reading up and believe I now need to post a question regarding my problem.
Here goes...
I bought a 32gb off Amazon before Christmas which arrive with 4.4.4. I assumed after a few days of running it would update itself to Lollipop but to no avail, no matter how many times I "checked for updates". I now believe this is probably due to it being a Japanese import. I suspect this as this is on the barcode sticker and the Android with the hatch open logo in recovery has Japanese text underneath.
Anyways I posted a few questions on the Google community and they have basically told me to sit tight as the update is still rolling out. Seems to me that I could be waiting forever so I started to look at doing the manually install myself, remember I'm a amateur here...
I successfully downloaded the ADK file from Google and, even though this came with the USB drivers, I downloaded these seperatly too. I've since deleted the duplicate files.
The problem I am getting is I cannot get the USB drivers to install for when the phone is in USB debugging mode. When I put the phone into both PTP and MTP mode I can direct the driver location towards the folder and everything works OK, when its debugging mode it says they cannot be installed. I think its important to note that I am using Windows XP.
I've tried removing, restarting and reinstalling but to no avail.
Suspect its an XP thing, how do I get around this?
Thanks in advance!
Click to expand...
Click to collapse
Install the adb/fastboot drivers. Google is your friend
Firstly thank you for your reply.
I have tried your install but it hasn't worked. I can tell I have been following a smilar update route looking at the pictures you uploaded also, although these screen snaps were obviously from a new OS (windows 7 perhaps).
Whats interesting to note however, is that in my device manager the phone is clearly shown twice, at the top as "Android Device", with "Google Nexus ADB Interface" below it and then again further down as "Other Devices" with MTP below with the familiar yellow exclamation mark.
Significant?
You actually don't need debugging mode if you're intending to manually flash the ROM. Debugging mode is only an android setting and you flash the ROM using fastboot which is outside of android.
Also you don't need the SDK.
I would say go to general > sticky roll-up then read my adb and fastboot thread to start
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
iainwith2is said:
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
Click to expand...
Click to collapse
If you used the adb and fastboot installer in my thread, did you use the "install system wide" option?
If not, do.
If you did and it did not work, read more of that section as the manual steps are also mentioned, which you'll need to follow.
iainwith2is said:
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
Click to expand...
Click to collapse
You don't have adb/fastboot set up properly. Google 15 second adb install xda.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You don't have adb/fastboot set up properly. Google 15 second adb install xda.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
He should already have it from my thread. Its just a question whether he used it correctly or whether it doesn't set up the environment variables on xp properly
Yes installed the 15 second install, Y,Y,N, then installed the Clockmod driver.
I'll go back and read it again, guess I must've missed something.
Have you rebooted? Try that. Is still no, you'll need to manually populate the environment variables.
Right, I have re-read the manual section and I can tell you I HAD edited the path before as I was following another instruction, one where it required SDK tools. So I have deleted the text I added last time (platform-tools was part of it) and copied and pasted the test in the manual area, including the colon.
Still cannot see the adb in the command window though?
iainwith2is said:
Right, I have re-read the manual section and I can tell you I HAD edited the path before as I was following another instruction, one where it required SDK tools. So I have deleted the text I added last time (platform-tools was part of it) and copied and pasted the test in the manual area, including the colon.
Still cannot see the adb in the command window though?
Click to expand...
Click to collapse
Don't copy and paste it. The text is generic. You must put your text there....then reboot.
this is what I pasted:
;c:\adb_fastboot
?
iainwith2is said:
this is what I pasted:
;c:\adb_fastboot
?
Click to expand...
Click to collapse
Which is generic. Is the folder your adb and fastboot executables are in called c:\adb_fastboot? If you used the installer, it is not.
Where would the installer put them? I've searched my computer for "fastboot" and its found the exe that I put in a folder on my desktop. This looks a similar address to what I changed the path to previously...
Oy vey
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Oy vey
Pardon?
Click to expand...
Click to collapse
OK so my path is broken so I won't be able to run adb commands?
Did you look at the root of c:? C:\adb perhaps? Its all covered in my thread isn't it? Are you reading it or skimming it? You don't even *need* to put it in the path. Its just easier. Please read to the end of the thread
Also, you don't need to run any adb commands
Yes I've scanned c: drive.
I've read and understood what I can, I'm not an expert so I can only compute what I understand.
I have reinstalled the adb setup a few times and I have noticed that it clearly says "0 files copied" after I select the exe files and system wide options.
I have also tried to run the adb and fastboot devices commands in the command window which gives me the aforementioned error messages.
For some reason, these programs are not being installed onto my machine?