Database Info

on a scale of 1-10 how F**Ked is my phone?

I have no idea whats going on with my phone, I cannot seem to use the "master reset" feature of my phone I start it up and This (see attached image) comes up.
in addition: I find that for some reason when I do normally start it up it gets stuck at the "touch the android to begin" to I touch it, and I get "Sorry The process process .com.android.providers.calendar has stopped, unexpectedly, please try again. I force close and another message pops up android.process.acore has stopped please try again" I close that, and I get the application google services framework (process.com.google.process.gapps) has stopped please try again. I close that.and I get "the process com.google.process.gapps has stopped unexpecedtly, please try again" I try bypassing that screen entirely by using the 4 corners trick. (top left, top right, bottom right bottom left) and I get to the wizard screen only there is only the banner that says wizard screen and nothing else. (and then I get those same errors)

shyataroo said:
I have no idea whats going on with my phone, I cannot seem to use the "master reset" feature of my phone I start it up and This (see attached image) comes up.
in addition: I find that for some reason when I do normally start it up it gets stuck at the "touch the android to begin" to I touch it, and I get "Sorry The process process .com.android.providers.calendar has stopped, unexpectedly, please try again. I force close and another message pops up android.process.acore has stopped please try again" I close that, and I get the application google services framework (process.com.google.process.gapps) has stopped please try again. I close that.and I get "the process com.google.process.gapps has stopped unexpecedtly, please try again" I try bypassing that screen entirely by using the 4 corners trick. (top left, top right, bottom right bottom left) and I get to the wizard screen only there is only the banner that says wizard screen and nothing else. (and then I get those same errors)
Click to expand...
Click to collapse
So first off, what did you do to make this happen? Try rooting? Rooted and tried to flash a ROM? Something different? Did it just start out of the blue? Give some info on how you came to this situation...

Yes I tried rooting, followed the instructions to the letter, and at first the phone would not go past the "Blaze 4G" logo, (I let it sit there for upwards of 20 minutes with no change, taking out and putting the battery back in) so I decided to flash it back to factory settings using the factory default package provided on this forum. ..and thats how this whole thing started.

shyataroo said:
Yes I tried rooting, followed the instructions to the letter, and at first the phone would not go past the "Blaze 4G" logo, (I let it sit there for upwards of 20 minutes with no change, taking out and putting the battery back in) so I decided to flash it back to factory settings using the factory default package provided on this forum. ..and thats how this whole thing started.
Click to expand...
Click to collapse
Gapps need to be reinstalled.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
Gapps need to be reinstalled.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)

shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
Definitely your gapps.
Only thing I can recommend is using Odin to flash stock again.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
If you still have a custom recovery you can install Gapps through it. You will have to do some research, though, and figure out which version Gapps you should use. Version of Gapps must correspond with version of Android .
Good luck, my friend
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
On a scale of 1 - 10, I would say 4 - 6... The device is not hard bricked, so there is still hope
You'll get it sorted, Holmes. For more help, if ya need it, shoot me a pm
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app

Somcom3X said:
Definitely your gapps.
Only thing I can recommend is using Odin to flash stock again.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
I did use odin to try to flash stock again, ...3 times.

shyataroo said:
I did use odin to try to flash stock again, ...3 times.
Click to expand...
Click to collapse
You wiped data? If you still got cwm format data in format menu.
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
You wiped data? If you still got cwm format data in format menu.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
the only thing I did to my phone was run odin to root it, using the link provided on here, and when that didn't work I tried re-odining it back to factory.

shyataroo said:
the only thing I did to my phone was run odin to root it, using the link provided on here, and when that didn't work I tried re-odining it back to factory.
Click to expand...
Click to collapse
Hmm. Can you Odin a recovery
Sent from my SAMSUNG-SGH-T769 using Tapatalk

Somcom3X said:
Hmm. Can you Odin a recovery
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
if you're asking me if I can go back into download mode, I believe I can.

shyataroo said:
if you're asking me if I can go back into download mode, I believe I can.
Click to expand...
Click to collapse
No, this: http://forum.xda-developers.com/showthread.php?t=1591622

Somcom3X said:
No, this: http://forum.xda-developers.com/showthread.php?t=1591622
Click to expand...
Click to collapse
ITS ALIVE. holy monkey-F**K ITS ALIVE. Sir, I thank you from the bottom of my heart, which unfortunately for you seeing as how I'm a 'murican, isn't that far comparatively speaking

shyataroo said:
ITS ALIVE. holy monkey-F**K ITS ALIVE. Sir, I thank you from the bottom of my heart, which unfortunately for you seeing as how I'm a 'murican, isn't that far comparatively speaking
Click to expand...
Click to collapse
Glad I could help. Enjoy your stay.

Edit: Problem solved. After just using stock Blaze 4G I found elsewhere rather than the file listed on the tutorials here for the PDA section, I was able to boot in recovery mode again and was able to do a stock reset from there. Everything looks a little different, but at least it actually runs again.

[Q] AT&T D800 stuck in twrp

I am have been using the stock rom, only rooted and using xposed frame network. Had been working perfectly well until today morning is see my phone in TWRP recovery. I don't remember updating anything recently. I tried restoring from my backup, tried restoring to factory reset and tried wiping dalvik ,cache., but every time it comes back to TWRP. Please help

Gulfcoastowl said:
I am have been using the stock rom, only rooted and using xposed frame network. Had been working perfectly well until today morning is see my phone in TWRP recovery. I don't remember updating anything recently. I tried restoring from my backup, tried restoring to factory reset and tried wiping dalvik ,cache., but every time it comes back to TWRP. Please help
Click to expand...
Click to collapse
AT&T sent out an update yesterday that's supposed to prepare your phone for the update later. It seems that the update just applied itself with asking. Anyways, try this link, it might help: http://forum.xda-developers.com/showthread.php?t=2451696

thank you
dirty2k9 said:
AT&T sent out an update yesterday that's supposed to prepare your phone for the update later. It seems that the update just applied itself with asking. Anyways, try this link, it might help: http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
Thank you man i did the terminal command method without nuking my phone. Wish i knew this before i restored to stock and factory reset etc. I have download a bunch and re install and retweek

LG G2 stuck on TWRP
Gulfcoastowl said:
Thank you man i did the terminal command method without nuking my phone. Wish i knew this before i restored to stock and factory reset etc. I have download a bunch and re install and retweek
Click to expand...
Click to collapse
Hi guys!! i have the same problem but the phone is not recognized in ADB when i use the command prompt, tried the terminal command prompt from TWRP, but it does not show nothing where i can input the code given in the link. Any help would be appreciated.
---------- Post added at 07:12 PM ---------- Previous post was at 06:43 PM ----------
Crimson0124 said:
Hi guys!! i have the same problem but the phone is not recognized in ADB when i use the command prompt, tried the terminal command prompt from TWRP, but it does not show nothing where i can input the code given in the link. Any help would be appreciated.
Click to expand...
Click to collapse
On terminal command on TWRP do i just press select and enter the code? thanks again!:good:
---------- Post added at 07:32 PM ---------- Previous post was at 07:12 PM ----------
Crimson0124 said:
Hi guys!! i have the same problem but the phone is not recognized in ADB when i use the command prompt, tried the terminal command prompt from TWRP, but it does not show nothing where i can input the code given in the link. Any help would be appreciated.
---------- Post added at 07:12 PM ---------- Previous post was at 06:43 PM ----------
On terminal command on TWRP do i just press select and enter the code? thanks again!:good:
Click to expand...
Click to collapse
Just enter the code from the link provided and IT WORKED!!!!! Thaaaaaankkkkk Youuuuu! :laugh::good:

dirty2k9 said:
AT&T sent out an update yesterday that's supposed to prepare your phone for the update later. It seems that the update just applied itself with asking. Anyways, try this link, it might help: http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
So I did this yesterday and it worked.... but the phone started trying to update again today and now the terminal command only works for the first minute of power-on. After that, the phone just tries to do the update again and puts me back in twrp.
PLEASE HELP!!!

khawajakustoms said:
So I did this yesterday and it worked.... but the phone started trying to update again today and now the terminal command only works for the first minute of power-on. After that, the phone just tries to do the update again and puts me back in twrp.
PLEASE HELP!!!
Click to expand...
Click to collapse
Mine was doing the same. Let your battery get down to like 25% and then enter the command. The update won't install because of low battery. Then you can go into titanium and freeze software updates. Make sure you're not plugged into a charger when you when you enter the command.
Sent from my LG-D800 using xda app-developers app

Naes said:
Mine was doing the same. Let your battery get down to like 25% and then enter the command. The update won't install because of low battery. Then you can go into titanium and freeze software updates. Make sure you're not plugged into a charger when you when you enter the command
Click to expand...
Click to collapse
took a while to wear my battery down, but got it done and so far so good. Thank you for the tip.
I had to uninstall the software update instead of just freezing it (I don't have the paid version). I figured freezing and uninstalling would have the same result ultimately. That shouldn't cause any problems right?

Naes said:
Mine was doing the same. Let your battery get down to like 25% and then enter the command. The update won't install because of low battery. Then you can go into titanium and freeze software updates. Make sure you're not plugged into a charger when you when you enter the command.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't think so but maybe someone with more knowledge will chime in. Hopefully it doesn't try to download the update again.
Sent from my LG-D800 using xda app-developers app

I am also stuck in twrp . I used the command via adb and via terminal command. but I can't boot into system. It again comes back to the twrp. You help is desperately needed guys.

zia1288 said:
I am also stuck in twrp . I used the command via adb and via terminal command. but I can't boot into system. It again comes back to the twrp. You help is desperately needed guys.
Click to expand...
Click to collapse
Same for me too, am i bricked my device ?? Is that it ? Is there anyway around to bring it back !!! am helpless and stuck
Device does not get detected in my Windows 8.1
Anyone please help me !!!

[Guide] AT&T LG G3 Back To stock (including MM)

Method for Going back to Stock on your AT&T LG G3
If your running Marshmallow 6.0 See 2nd post for downgrading/going back to stock - http://forum.xda-developers.com/showpost.php?p=54222637&postcount=2
RETURN TO STOCK TOT Method! AT&T
Download
1. Download Both Stock Image File & DLL file - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
4.Megalock DLL File: HERE
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Click to expand...
Click to collapse
​
[/CENTER]
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to buy me a Beer if you feel I have helped you Thank you!

Downgrade/Go back to stock from MM 6.0
LGUP:
Download LGUP Here - http://oceanhost.eu/28lf2bj57g7q/LGUP-G2-G3.zip.html
Install every file
Make sure you have downloaded the required TOT file - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Start LGUP on your computer "make sure your phone is plugged in"
On LGUP choose "Upgrade" Then choose the TOT file you downloaded, then go back choose "refurbish" and flash!
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY

Many thanks for this. Hopefully I never need it! Coming from a Samsung, this is a bit more complicated than I am accustomed.

I assume this is pc only?
Sent from my LG G3
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
And do you think I need to do this if I'm just taking it in to a retail store? The store employee probably isn't going to check super in depth Will he?
What I'm asking is if I use supersu to unroot and then do a factory reset using the devices stock recovery would that he good enough to swap devices at the store?
Sent from my LG G3

Pure+ said:
I assume this is pc only?
Sent from my LG G3
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
And do you think I need to do this if I'm just taking it in to a retail store? The store employee probably isn't going to check super in depth Will he?
What I'm asking is if I use supersu to unroot and then do a factory reset using the devices stock recovery would that he good enough to swap devices at the store?
Sent from my LG G3
Click to expand...
Click to collapse
This guide? Yes
Sent from my C6903 using Tapatalk

hyelton said:
This guide? Yes
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
I figured as much. And comment on my other question?
Sent from my LG G3

I always assume the worst, so prepare for it.

mrhaley30705 said:
I always assume the worst, so prepare for it.
Click to expand...
Click to collapse
I would, but I live in a Mac world. I don't know a single person with a pc and even at work my company has all Macs. I'm completely locked out from the pc eco system right now.
Sent from my LG G3

hyelton said:
Method for Going back to Stock on your AT&T LG G3
Click to expand...
Click to collapse
tried this... stuck at "Factory unlock status 2"
any ideas?

screwyluie said:
tried this... stuck at "Factory unlock status 2"
any ideas?
Click to expand...
Click to collapse
Perform a factory reset

hyelton said:
Perform a factory reset
Click to expand...
Click to collapse
if only it were that simple

screwyluie said:
if only it were that simple
Click to expand...
Click to collapse
Yes... Its very simple.

hyelton said:
Yes... Its very simple.
Click to expand...
Click to collapse
snarky reply FTW!
thanks for all your help, I got it sorted, and no a factory reset was not part of the process

screwyluie said:
snarky reply FTW!
thanks for all your help, I got it sorted, and no a factory reset was not part of the process
Click to expand...
Click to collapse
Wasn't sure if it was stated still in my OP or not, but that error usually occured when flashing the tot method for the first time on a new phone, which you would use a button combo to factory reset while booting up the phone.

hyelton said:
Wasn't sure if it was stated still in my OP or not, but that error usually occured when flashing the tot method for the first time on a new phone, which you would use a button combo to factory reset while booting up the phone.
Click to expand...
Click to collapse
I tried a great many things to get rid of the 2 status and nothing worked... I think I reflashed no less than 20 times, and finally one took. The flash tool, if left alone would always come back as failed and I'd be left with a status 2. I tried factory resets, I tried various other little tricks listed here and there on the web (usb ports, plugging and unplugging at various times, etc) nothing worked... finally after a dozen or so tries at various trick methods, I thought, well let's just do it by the book one more time and see what happens, and sure enough I finally got a status 3 and a pass, pulled the battery and rebooted, everything is good now.

screwyluie said:
I tried a great many things to get rid of the 2 status and nothing worked... I think I reflashed no less than 20 times, and finally one took. The flash tool, if left alone would always come back as failed and I'd be left with a status 2. I tried factory resets, I tried various other little tricks listed here and there on the web (usb ports, plugging and unplugging at various times, etc) nothing worked... finally after a dozen or so tries at various trick methods, I thought, well let's just do it by the book one more time and see what happens, and sure enough I finally got a status 3 and a pass, pulled the battery and rebooted, everything is good now.
Click to expand...
Click to collapse
Also remember flashtool will almost ALWAYS fail.. Once its 85% its pretty much done. If it fails past 85% it's done flashing, the rest is just waiting for reboot.

hyelton said:
Also remember flashtool will almost ALWAYS fail.. Once its 85% its pretty much done. If it fails past 85% it's done flashing, the rest is just waiting for reboot.
Click to expand...
Click to collapse
yeah tried that too, it booted to a factory reset status 2 screen.
I'm sure I'm the odd man out in this process, but for me it wasn't as straight forward as all that. I think perhaps the answer for me was flashing multiple times until it finally decided to work. I know with the sgs3 (my last phone) some people had to flash multiple times and others didn't, I'm thinking it's the same here.

screwyluie said:
yeah tried that too, it booted to a factory reset status 2 screen.
I'm sure I'm the odd man out in this process, but for me it wasn't as straight forward as all that. I think perhaps the answer for me was flashing multiple times until it finally decided to work. I know with the sgs3 (my last phone) some people had to flash multiple times and others didn't, I'm thinking it's the same here.
Click to expand...
Click to collapse
What matters is you have it working now

There just doesn't seem to be overwhelming evidence that returning to stock is completely dependable for the 850d. So I continue to pine for root.
Sent from my LG-D850 using XDA Premium 4 mobile app

Alienuser said:
There just doesn't seem to be overwhelming evidence that returning to stock is completely dependable for the 850d. So I continue to pine for root.
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes... Its the same exact method as the G2 was and that thread has 600 pages I think??

[Q] Wiped with no rom to install, only have recovery now...

So yeh i wiped and thought i had a rom to install, didnt though. mistake on my part i know. can someone link or help me install the correct drivers so i can get adb working to push a rom so i can my phone up and running again?
when i boot into recovery it is only showing up as 'AOSP ON HAMMERHEAD' with the little yellow error triangle in device manager.
like i said i just need help getting a rom pushed on my phone
EDIT: im thinking about just restore stock unroot cause you can just do it from fastboot. is there anyway to get my data off before that or would you suggest just pushing a rom?

Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 05:08 PM ----------
jd1639 said:
Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Edit, if you get adb working you could pull your sdcard. Personally I think it's easier to get a rom working and then using mtp to drag and drop what you want off your sdcard to your pc
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 05:08 PM ----------
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i used that but it still says 'AOSP ON HAMMERHEAD' in device manager when im in recovery. will that matter at all?
they all also explainhow to use adb and get it running with a rom. is there anything special i need to do for my situation?

fergdizzle9090 said:
yeah i used that but it still says 'AOSP ON HAMMERHEAD' in device manager when im in recovery. will that matter at all?
they all also explainhow to use adb and get it running with a rom. is there anything special i need to do for my situation?
Click to expand...
Click to collapse
Right click on that>update driver software>browse my pc>let me pick from the list of drivers>android adb interface

varuntis1993 said:
Right click on that>update driver software>browse my pc>let me pick from the list of drivers>android adb interface
Click to expand...
Click to collapse
yeah everytime i try and do that it says it doesnt work. the 15 second tool worked for when it was booted in a rom but now its in recovery and the driver isnt correct. might just completely wipe and unroot and go back stock...

fergdizzle9090 said:
yeah everytime i try and do that it says it doesnt work. the 15 second tool worked for when it was booted in a rom but now its in recovery and the driver isnt correct. might just completely wipe and unroot and go back stock...
Click to expand...
Click to collapse
Restart both the devices and try again. If that doesn't work again then
download the latest google drivers and try with them.
edit-http://developer.android.com/sdk/win-usb.html
But since its working for you when android is booted I see no reason for it not working in recovery mode. obv it needs to be installed correctly. Btw what recovery r u using?

varuntis1993 said:
Restart both the devices and try again. If that doesn't work again then
download the latest google drivers and try with them.
edit-http://developer.android.com/sdk/win-usb.html
But since its working for you when android is booted I see no reason for it not working in recovery mode. obv it needs to be installed correctly. Btw what recovery r u using?
Click to expand...
Click to collapse
TWRP. i updated to the latest one to install 4.4.4 and now when i try to install catcalysm it fails. im thinking it may be a source of some other issues

ended up using a toolkit to install a universal driver and wipe out all others. recognized it from there. thanks! now back to my original issues..

fergdizzle9090 said:
ended up using a toolkit to install a universal driver and wipe out all others. recognized it from there. thanks! now back to my original issues..
Click to expand...
Click to collapse
When you type
Code:
adb devices
does it list your device?

theesotericone said:
When you type
Code:
adb devices
does it list your device?
Click to expand...
Click to collapse
yep it does now after i tried several different drivers. that was my problem initially is that wasnt showing up when in recovery. now im onto my next problem to figure out why i cant make outgoing calls... i think its a sprint/4.4.4 issue...

fergdizzle9090 said:
Wiped with no rom to install, only have recovery now...
Click to expand...
Click to collapse
A clean slate. I love it. A little too much some times, I think.

nice

How can I unbrick my att D850

I have tried the .tot method using lgflash but i get through the steps and when it starts to flash the rom it errors and says version check failed and underneath it is a row of 0's. The checked info above like phone model and stuff is all correct. Is there some other way of doing this?

tstanyaspain said:
I have tried the .tot method using lgflash but i get through the steps and when it starts to flash the rom it errors and says version check failed and underneath it is a row of 0's. The checked info above like phone model and stuff is all correct. Is there some other way of doing this?
Click to expand...
Click to collapse
Just follow my LG G3 back to stock guide if you wasn't already.
That error usually means your using a USB 3.0 port. Make sure your using a USB 2.0 port only!
The tot method is the ONLY back to stock method for AT&T LG phones.
Sent from my LG-E981h using Tapatalk

i have switched to a usb 2.0 port and I get the same error the exact error message reads: "Model information check fail!00000000"

maybe i am trying to use the wrong .tot my phone had lollipop 5.0.1 when it crashed do i need to then bring it back to stock 5.0.1? i have been trying to flash it with "LGD850AT-01-V10d-310-410-JUN-19-2014+0.bin"??? If so then how also do I change a system.img file to a .bin file so i can use lgflash? here is a pic of my screen after trying to flash .bin using lgflash

Can anyone here help me with this please????? I would so appreciate it!!!

tstanyaspain said:
maybe i am trying to use the wrong .tot my phone had lollipop 5.0.1 when it crashed do i need to then bring it back to stock 5.0.1? i have been trying to flash it with "LGD850AT-01-V10d-310-410-JUN-19-2014+0.bin"??? If so then how also do I change a system.img file to a .bin file so i can use lgflash? here is a pic of my screen after trying to flash .bin using lgflash
Click to expand...
Click to collapse
I'm confused why would you need to change system.img to .bin what's that got to do with going back to stock??
You just flash the file in flashtool
Sent from my LG-E981h using Tapatalk

Sounds like you need to place the lg g3 megallock.DLL in the lgflashtool directory.

lwg45714 said:
Sounds like you need to place the lg g3 megallock.DLL in the lgflashtool directory.
Click to expand...
Click to collapse
Wait what? Flash tool won't even open if that's not there. So it's not that. Also it's a generic megalock file. There's no exact model megalock dll.
Sent from my iPhone using Tapatalk
---------- Post added at 11:14 PM ---------- Previous post was at 11:12 PM ----------
tstanyaspain said:
i have switched to a usb 2.0 port and I get the same error the exact error message reads: "Model information check fail!00000000"
Click to expand...
Click to collapse
And after changing USB ports did you change your com port to com41? When you use a different USB port you must change the com port again.
Sent from my iPhone using Tapatalk

It won't let me create a new thread so hoping someone here can help
I hit fix permissions in twrp and now it won't boot passed the the animation screen. Just sits at a black screen.
Anyone know how to fix this?

nest75068 said:
It won't let me create a new thread so hoping someone here can help
I hit fix permissions in twrp and now it won't boot passed the the animation screen. Just sits at a black screen.
Anyone know how to fix this?
Click to expand...
Click to collapse
Re flash the rom?
Sent from my iPhone using Tapatalk

hyelton said:
Re flash the rom?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Was hopi that wouldn't be the case. The reason I did that was becasue TWRP was not seeing my 64gb card so I could do a Nandroid(not enough space on internal).
Guess I have to wait until I can get home to find my old 32gb card so I can then download the ROM again and then flash.

Ended up having to reintsall rom and do a complete wipe because even after dirty flashing, I kept getting an error saying Home had stopped.

nest75068 said:
Ended up having to reintsall rom and do a complete wipe because even after dirty flashing, I kept getting an error saying Home had stopped.
Click to expand...
Click to collapse
Yeah after something like that you'd need to
Sent from my iPhone using Tapatalk

Try this if flash tool done work.. I had bootloop from firmware upgrade. This fixed my phone.
http://forums.androidcentral.com/showthread.php?t=373947
Post 5.
Sent from my LG-D850 using XDA Free mobile app