I have no idea whats going on with my phone, I cannot seem to use the "master reset" feature of my phone I start it up and This (see attached image) comes up.
in addition: I find that for some reason when I do normally start it up it gets stuck at the "touch the android to begin" to I touch it, and I get "Sorry The process process .com.android.providers.calendar has stopped, unexpectedly, please try again. I force close and another message pops up android.process.acore has stopped please try again" I close that, and I get the application google services framework (process.com.google.process.gapps) has stopped please try again. I close that.and I get "the process com.google.process.gapps has stopped unexpecedtly, please try again" I try bypassing that screen entirely by using the 4 corners trick. (top left, top right, bottom right bottom left) and I get to the wizard screen only there is only the banner that says wizard screen and nothing else. (and then I get those same errors)
shyataroo said:
I have no idea whats going on with my phone, I cannot seem to use the "master reset" feature of my phone I start it up and This (see attached image) comes up.
in addition: I find that for some reason when I do normally start it up it gets stuck at the "touch the android to begin" to I touch it, and I get "Sorry The process process .com.android.providers.calendar has stopped, unexpectedly, please try again. I force close and another message pops up android.process.acore has stopped please try again" I close that, and I get the application google services framework (process.com.google.process.gapps) has stopped please try again. I close that.and I get "the process com.google.process.gapps has stopped unexpecedtly, please try again" I try bypassing that screen entirely by using the 4 corners trick. (top left, top right, bottom right bottom left) and I get to the wizard screen only there is only the banner that says wizard screen and nothing else. (and then I get those same errors)
Click to expand...
Click to collapse
So first off, what did you do to make this happen? Try rooting? Rooted and tried to flash a ROM? Something different? Did it just start out of the blue? Give some info on how you came to this situation...
Yes I tried rooting, followed the instructions to the letter, and at first the phone would not go past the "Blaze 4G" logo, (I let it sit there for upwards of 20 minutes with no change, taking out and putting the battery back in) so I decided to flash it back to factory settings using the factory default package provided on this forum. ..and thats how this whole thing started.
shyataroo said:
Yes I tried rooting, followed the instructions to the letter, and at first the phone would not go past the "Blaze 4G" logo, (I let it sit there for upwards of 20 minutes with no change, taking out and putting the battery back in) so I decided to flash it back to factory settings using the factory default package provided on this forum. ..and thats how this whole thing started.
Click to expand...
Click to collapse
Gapps need to be reinstalled.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Gapps need to be reinstalled.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
Definitely your gapps.
Only thing I can recommend is using Odin to flash stock again.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
If you still have a custom recovery you can install Gapps through it. You will have to do some research, though, and figure out which version Gapps you should use. Version of Gapps must correspond with version of Android .
Good luck, my friend
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
---------- Post added at 04:58 PM ---------- Previous post was at 04:52 PM ----------
shyataroo said:
could you perhaps provide me a link with the means to install it? like do I mount the phone as a USB hard drive (it isn't recognized)
Click to expand...
Click to collapse
On a scale of 1 - 10, I would say 4 - 6... The device is not hard bricked, so there is still hope
You'll get it sorted, Holmes. For more help, if ya need it, shoot me a pm
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
Somcom3X said:
Definitely your gapps.
Only thing I can recommend is using Odin to flash stock again.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
I did use odin to try to flash stock again, ...3 times.
shyataroo said:
I did use odin to try to flash stock again, ...3 times.
Click to expand...
Click to collapse
You wiped data? If you still got cwm format data in format menu.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You wiped data? If you still got cwm format data in format menu.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
the only thing I did to my phone was run odin to root it, using the link provided on here, and when that didn't work I tried re-odining it back to factory.
shyataroo said:
the only thing I did to my phone was run odin to root it, using the link provided on here, and when that didn't work I tried re-odining it back to factory.
Click to expand...
Click to collapse
Hmm. Can you Odin a recovery
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Hmm. Can you Odin a recovery
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
if you're asking me if I can go back into download mode, I believe I can.
shyataroo said:
if you're asking me if I can go back into download mode, I believe I can.
Click to expand...
Click to collapse
No, this: http://forum.xda-developers.com/showthread.php?t=1591622
Somcom3X said:
No, this: http://forum.xda-developers.com/showthread.php?t=1591622
Click to expand...
Click to collapse
ITS ALIVE. holy monkey-F**K ITS ALIVE. Sir, I thank you from the bottom of my heart, which unfortunately for you seeing as how I'm a 'murican, isn't that far comparatively speaking
shyataroo said:
ITS ALIVE. holy monkey-F**K ITS ALIVE. Sir, I thank you from the bottom of my heart, which unfortunately for you seeing as how I'm a 'murican, isn't that far comparatively speaking
Click to expand...
Click to collapse
Glad I could help. Enjoy your stay.
Edit: Problem solved. After just using stock Blaze 4G I found elsewhere rather than the file listed on the tutorials here for the PDA section, I was able to boot in recovery mode again and was able to do a stock reset from there. Everything looks a little different, but at least it actually runs again.
Related
*Copied mostly from my topic on AndroidForums*
/*from June 27th, thread start*/
So I found out that on the 25th or 26th there was an update for the Verizon GS3. Every time I try to update, it gives me this error (see below) after it reboots. I should also probably note that when it reboots, you briefly see "Booting into recovery" in the top left corner, though it doesn't actually boot into recovery. I was rooted, but I did a full unroot with SuperSU, and it still doesn't work. I dont want to flash a stock image because of all my app data that I do not want to lose.
Here is what the update screen looks like: i . imgur. com/oC04moq.png
And after the "update": i . imgur. com/oC04moq.png
Scroll down a little bit on that same box: i . imgur. com/iSqwQl0.jpg
Please someone help me! This is driving me crazy!
/End post 1\
Click to expand...
Click to collapse
/revive post October 6th\
So its been about 3 months now. Problem still persists. Again, I can not flash anything with ODIN(307), or update the phone. I have tried with Kies and in the phone. I can boot into download mode and recovery mode fine. Any help would again be greatly appreciated. I don't have access to my pc atm but any suggestions are still appreciated.
*The phone runs flawlessly, I just want to be able to root again *
/end post
Click to expand...
Click to collapse
/suggestion from user
"I would wind this back to the start.
It may not be just a phone issue. Uninstal kies and any android drivers and reboot.
Try this first:
★[8/27] [Casual] [Root, Unlock, Recovery] Vzw S3 Toolkit or 1-Click!! [ALL OTA's]★ - xda-developers
For the Verizion only. Anyone else thinking of using this start a new thread!!"
Click to expand...
Click to collapse
and my respose after trying: gyazo . com/3827e1487bf8cb3aeb0871b946fde785.png
Been on this for about 10mins, videos I have seen have done nearly instantly. I don't want to disconnect anything...
EDIT: I tried again twice. Same issue. I'm going to uninstall all drivers etc and try again.
Nup, still not working. Any more suggestions?
So far I have tried:
Odin(for root)
Kies(for updating)
Casual
Uninstalling kies/drivers and reinstalling and retrying all
All recognize the device, but nothing happens.
Click to expand...
Click to collapse
Now I'm here. I've never seen or heard anything like this before. Please post any suggestions you might have. I am down to try almost anything.
Sorry if I'm breaking any rules or anything. I just want this resolved.
And sorry for long post.
I'm assuming you've done all this with the same USB cable? Try a different cable (preferably the included one), different usb port, and also a different computer.
Sent from my SCH-I535 using Tapatalk 4
I can't even tell what is going on, this post is very confusing. Is Odin giving a fail message?
1. Odin should work, if it doesn't in a normal circumstance, then this method will work http://forum.xda-developers.com/showthread.php?t=1840030. This is will wipe all your data, but you'll be good to go from there.
2. Why did you unroot through super su? What rom are you running right now?
3. You can try using this image:
http://forum.xda-developers.com/showthread.php?t=1974114, then after you do this method you can run casual and root from there, while preserving your data.
Sent from my SCH-I535 using Tapatalk 2
Thanks to both of you!!!!!! I used a different port on my PC, and used the nowipe image BadUsername posted, and now I'm rooted, custom recovery, unlocked bootloader, and no data loss!! Again, thank you so much.
:highfive: yea teamwork! And last thing I'll suggest is to backup your IMEI if you haven't done so before.
Hi,
Recently I brought T Mobile LG G2 Unlocked Phone from US. Few Days back I clicked on "Update&Center" Icon and it started updating apps and also I updated the system. This system update spoiled my phone with out knowing it I clicked on system update. After upgrade my phone is not starting and going to teamwin console as shown in image. I tried to find out solution in lot of website but I am not understanding where to start, how to start and what softwares I need to download. I tried to go to LG Service center here in India but they wont service other country LG mobiles. Even I tried to repair in mobile shop but no use.
Can some one please tell me the steps how to bring back my LG G2 Mobile to Working state. I am really confused what kind of software to download some one will say download drivers install through LG Flash tool. Please some one guide me what all steps I need to do. Any suggestion would be much appreciated.
Try these and see if it helps...
https://www.google.com/url?sa=t&sou...111D7e8LobiaesNdA&sig2=9igHP-Qon4gKpi6rGwv0NA
http://forum.xda-developers.com/showthread.php?t=2451696
Swizzle82 said:
Try these and see if it helps...
https://www.google.com/url?sa=t&sou...111D7e8LobiaesNdA&sig2=9igHP-Qon4gKpi6rGwv0NA
http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
Hi Swizzle,
Thank you for your reply.
I tried both links, but still my phone is going to "teamwin" console. Process I followed : Advanced -> Terminal Command -> Select ->
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota -> Go
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc -> Go
Please see the attachment also.
Some One Please Help Me
Can you enter upgrade mode by powering off the phone and then while plugging it in to a windows pc hold vol + at same time??
Swizzle82 said:
Can you enter upgrade mode by powering off the phone and then while plugging it in to a windows pc hold vol + at same time??
Click to expand...
Click to collapse
I Tired that too by watching this video youtube.com/watch?v=z6SGWR0hGg4
I downloaded these softwares in my machine
1)FlashTool.1.0.54
2)B2CAppSetup
3)LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1
4)T-Mobile USA D80110C_00.kdz
Step -1: Installed LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe on my PC
Step -2: Installed B2CAppSetup On my PC
Step -3: Connected my phone to PC, and Pressed Powerkey+Up arrow and went to download mode.
Step -4:UpTestEX.exe and followed the process shown in video.
Step -5:Changed the country to Republic of Korea because on back side of my phone it say made in korea.
Step 6: Pressed Start Upgrade button on LG Mobile Support Tool.
Step 7: Hanged near Downloading Software (as shown in the pic) I waited for 4 hours still it is in same stage. But in video it took kdz file from path he mentioned, where as in my case it is showing downloading software.
Please see the attached images.
Are there in backups stored?
Sent from my LG-D801 using Tapatalk
unciviilized said:
Are there in backups stored?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Sorry, how to check backups stored ? I don't know how to check. I am new to this kind of things, I am just searching some website and trying the steps as per there suggestion. None of the things are working for me
vijaysachin said:
Sorry, how to check backups stored ? I don't know how to check. I am new to this kind of things, I am just searching some website and trying the steps as per there suggestion. None of the things are working for me
Click to expand...
Click to collapse
On first picture go to restore then see if there is a backup there should say a name of a rom with a date maybe
Sent from my LG-D801 using Tapatalk
Did the restore work for you?
Sent from my LG-D801 using Tapatalk
unciviilized said:
Did the restore work for you?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I Checked clicked on restore Icon but there is blank screen.
Go to install then , what do u see?
Sent from my LG-D801 using Tapatalk
unciviilized said:
Go to install then , what do u see?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I saw TWRP folder.
vijaysachin said:
I saw TWRP folder.
Click to expand...
Click to collapse
Install->(up A level) ->boot,cache,data,dev .......
Look for the folder downloads and open
Sent from my LG-D801 using Tapatalk
---------- Post added at 10:39 PM ---------- Previous post was at 10:37 PM ----------
Option left is to restore to 4.2.2
LG Flash Tool Install and Usage for ATT LG G2 D800: http://youtu.be/Lg693AYgoTo
Sent from my LG-D801 using Tapatalk
unciviilized said:
Look for the folder downloads and open
Sent from my LG-D801 using Tapatalk
---------- Post added at 10:39 PM ---------- Previous post was at 10:37 PM ----------
Option left is to restore to 4.2.2
LG Flash Tool Install and Usage for ATT LG G2 D800: http://youtu.be/Lg693AYgoTo
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I didn't found any folder name with download. Second option you mentioned to restore 4.2.2. I will check this video and I will try to execute it. Hope this will work
vijaysachin said:
I didn't found any folder name with download. Second option you mentioned to restore 4.2.2. I will check this video and I will try to execute it. Hope this will work
Click to expand...
Click to collapse
The video you send helped me a lot THANK YOU VERY MUCH. After following those steps my phone started and I felt so happy seeing that, but my phone is keep on restarting. What I have to do next ?
Even I can't switch off my mobile, phone is restarting continuously. Please help me from hear also.
I tried the same process showed in the video for T-Mobile 4.2.2 JB version. But at 94% I got a failure saying download fail !!! Please find the attachment for the same. After this failure my phone is continuously in boot loop. Can some one please help me
vijaysachin said:
I tried the same process showed in the video for T-Mobile 4.2.2 JB version. But at 94% I got a failure saying download fail !!! Please find the attachment for the same. After this failure my phone is continuously in boot loop. Can some one please help me
Click to expand...
Click to collapse
I just restored my phone with this and I also got the download fail but it worked on the phone try it again don't pay attention to the program but let your phone plugged in and don't close the program until it boots
Sent from my LG-D801 using Tapatalk
---------- Post added at 07:51 PM ---------- Previous post was at 07:25 PM ----------
Before you try it again do a factory reset using the poweron key sequence? (power+vol-, let go when LG logo comes up, press again immediately
Sent from my LG-D801 using Tapatalk
Did you get it working? ?
Sent from my LG-D801 using Tapatalk
Method for Going back to Stock on your AT&T LG G3
If your running Marshmallow 6.0 See 2nd post for downgrading/going back to stock - http://forum.xda-developers.com/showpost.php?p=54222637&postcount=2
RETURN TO STOCK TOT Method! AT&T
Download
1. Download Both Stock Image File & DLL file - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
4.Megalock DLL File: HERE
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Click to expand...
Click to collapse
[/CENTER]
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to buy me a Beer if you feel I have helped you Thank you!
Downgrade/Go back to stock from MM 6.0
LGUP:
Download LGUP Here - http://oceanhost.eu/28lf2bj57g7q/LGUP-G2-G3.zip.html
Install every file
Make sure you have downloaded the required TOT file - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Start LGUP on your computer "make sure your phone is plugged in"
On LGUP choose "Upgrade" Then choose the TOT file you downloaded, then go back choose "refurbish" and flash!
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
Many thanks for this. Hopefully I never need it! Coming from a Samsung, this is a bit more complicated than I am accustomed.
I assume this is pc only?
Sent from my LG G3
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
And do you think I need to do this if I'm just taking it in to a retail store? The store employee probably isn't going to check super in depth Will he?
What I'm asking is if I use supersu to unroot and then do a factory reset using the devices stock recovery would that he good enough to swap devices at the store?
Sent from my LG G3
Pure+ said:
I assume this is pc only?
Sent from my LG G3
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
And do you think I need to do this if I'm just taking it in to a retail store? The store employee probably isn't going to check super in depth Will he?
What I'm asking is if I use supersu to unroot and then do a factory reset using the devices stock recovery would that he good enough to swap devices at the store?
Sent from my LG G3
Click to expand...
Click to collapse
This guide? Yes
Sent from my C6903 using Tapatalk
hyelton said:
This guide? Yes
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
I figured as much. And comment on my other question?
Sent from my LG G3
I always assume the worst, so prepare for it.
mrhaley30705 said:
I always assume the worst, so prepare for it.
Click to expand...
Click to collapse
I would, but I live in a Mac world. I don't know a single person with a pc and even at work my company has all Macs. I'm completely locked out from the pc eco system right now.
Sent from my LG G3
hyelton said:
Method for Going back to Stock on your AT&T LG G3
Click to expand...
Click to collapse
tried this... stuck at "Factory unlock status 2"
any ideas?
screwyluie said:
tried this... stuck at "Factory unlock status 2"
any ideas?
Click to expand...
Click to collapse
Perform a factory reset
hyelton said:
Perform a factory reset
Click to expand...
Click to collapse
if only it were that simple
screwyluie said:
if only it were that simple
Click to expand...
Click to collapse
Yes... Its very simple.
hyelton said:
Yes... Its very simple.
Click to expand...
Click to collapse
snarky reply FTW!
thanks for all your help, I got it sorted, and no a factory reset was not part of the process
screwyluie said:
snarky reply FTW!
thanks for all your help, I got it sorted, and no a factory reset was not part of the process
Click to expand...
Click to collapse
Wasn't sure if it was stated still in my OP or not, but that error usually occured when flashing the tot method for the first time on a new phone, which you would use a button combo to factory reset while booting up the phone.
hyelton said:
Wasn't sure if it was stated still in my OP or not, but that error usually occured when flashing the tot method for the first time on a new phone, which you would use a button combo to factory reset while booting up the phone.
Click to expand...
Click to collapse
I tried a great many things to get rid of the 2 status and nothing worked... I think I reflashed no less than 20 times, and finally one took. The flash tool, if left alone would always come back as failed and I'd be left with a status 2. I tried factory resets, I tried various other little tricks listed here and there on the web (usb ports, plugging and unplugging at various times, etc) nothing worked... finally after a dozen or so tries at various trick methods, I thought, well let's just do it by the book one more time and see what happens, and sure enough I finally got a status 3 and a pass, pulled the battery and rebooted, everything is good now.
screwyluie said:
I tried a great many things to get rid of the 2 status and nothing worked... I think I reflashed no less than 20 times, and finally one took. The flash tool, if left alone would always come back as failed and I'd be left with a status 2. I tried factory resets, I tried various other little tricks listed here and there on the web (usb ports, plugging and unplugging at various times, etc) nothing worked... finally after a dozen or so tries at various trick methods, I thought, well let's just do it by the book one more time and see what happens, and sure enough I finally got a status 3 and a pass, pulled the battery and rebooted, everything is good now.
Click to expand...
Click to collapse
Also remember flashtool will almost ALWAYS fail.. Once its 85% its pretty much done. If it fails past 85% it's done flashing, the rest is just waiting for reboot.
hyelton said:
Also remember flashtool will almost ALWAYS fail.. Once its 85% its pretty much done. If it fails past 85% it's done flashing, the rest is just waiting for reboot.
Click to expand...
Click to collapse
yeah tried that too, it booted to a factory reset status 2 screen.
I'm sure I'm the odd man out in this process, but for me it wasn't as straight forward as all that. I think perhaps the answer for me was flashing multiple times until it finally decided to work. I know with the sgs3 (my last phone) some people had to flash multiple times and others didn't, I'm thinking it's the same here.
screwyluie said:
yeah tried that too, it booted to a factory reset status 2 screen.
I'm sure I'm the odd man out in this process, but for me it wasn't as straight forward as all that. I think perhaps the answer for me was flashing multiple times until it finally decided to work. I know with the sgs3 (my last phone) some people had to flash multiple times and others didn't, I'm thinking it's the same here.
Click to expand...
Click to collapse
What matters is you have it working now
There just doesn't seem to be overwhelming evidence that returning to stock is completely dependable for the 850d. So I continue to pine for root.
Sent from my LG-D850 using XDA Premium 4 mobile app
Alienuser said:
There just doesn't seem to be overwhelming evidence that returning to stock is completely dependable for the 850d. So I continue to pine for root.
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes... Its the same exact method as the G2 was and that thread has 600 pages I think??
So yeh i wiped and thought i had a rom to install, didnt though. mistake on my part i know. can someone link or help me install the correct drivers so i can get adb working to push a rom so i can my phone up and running again?
when i boot into recovery it is only showing up as 'AOSP ON HAMMERHEAD' with the little yellow error triangle in device manager.
like i said i just need help getting a rom pushed on my phone
EDIT: im thinking about just restore stock unroot cause you can just do it from fastboot. is there anyway to get my data off before that or would you suggest just pushing a rom?
Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 05:08 PM ----------
jd1639 said:
Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Edit, if you get adb working you could pull your sdcard. Personally I think it's easier to get a rom working and then using mtp to drag and drop what you want off your sdcard to your pc
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Google 15 second adb install xda. Should be everything you need. Then push a rom onto your device.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 05:08 PM ----------
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i used that but it still says 'AOSP ON HAMMERHEAD' in device manager when im in recovery. will that matter at all?
they all also explainhow to use adb and get it running with a rom. is there anything special i need to do for my situation?
fergdizzle9090 said:
yeah i used that but it still says 'AOSP ON HAMMERHEAD' in device manager when im in recovery. will that matter at all?
they all also explainhow to use adb and get it running with a rom. is there anything special i need to do for my situation?
Click to expand...
Click to collapse
Right click on that>update driver software>browse my pc>let me pick from the list of drivers>android adb interface
varuntis1993 said:
Right click on that>update driver software>browse my pc>let me pick from the list of drivers>android adb interface
Click to expand...
Click to collapse
yeah everytime i try and do that it says it doesnt work. the 15 second tool worked for when it was booted in a rom but now its in recovery and the driver isnt correct. might just completely wipe and unroot and go back stock...
fergdizzle9090 said:
yeah everytime i try and do that it says it doesnt work. the 15 second tool worked for when it was booted in a rom but now its in recovery and the driver isnt correct. might just completely wipe and unroot and go back stock...
Click to expand...
Click to collapse
Restart both the devices and try again. If that doesn't work again then
download the latest google drivers and try with them.
edit-http://developer.android.com/sdk/win-usb.html
But since its working for you when android is booted I see no reason for it not working in recovery mode. obv it needs to be installed correctly. Btw what recovery r u using?
varuntis1993 said:
Restart both the devices and try again. If that doesn't work again then
download the latest google drivers and try with them.
edit-http://developer.android.com/sdk/win-usb.html
But since its working for you when android is booted I see no reason for it not working in recovery mode. obv it needs to be installed correctly. Btw what recovery r u using?
Click to expand...
Click to collapse
TWRP. i updated to the latest one to install 4.4.4 and now when i try to install catcalysm it fails. im thinking it may be a source of some other issues
ended up using a toolkit to install a universal driver and wipe out all others. recognized it from there. thanks! now back to my original issues..
fergdizzle9090 said:
ended up using a toolkit to install a universal driver and wipe out all others. recognized it from there. thanks! now back to my original issues..
Click to expand...
Click to collapse
When you type
Code:
adb devices
does it list your device?
theesotericone said:
When you type
Code:
adb devices
does it list your device?
Click to expand...
Click to collapse
yep it does now after i tried several different drivers. that was my problem initially is that wasnt showing up when in recovery. now im onto my next problem to figure out why i cant make outgoing calls... i think its a sprint/4.4.4 issue...
fergdizzle9090 said:
Wiped with no rom to install, only have recovery now...
Click to expand...
Click to collapse
A clean slate. I love it. A little too much some times, I think.
nice
Hey all,
This started a couple of weeks ago and has gotten worse. I'll be using my phone normally and it will just freeze. No warnings, no messages, nothing. If I wait around 5 minutes I'll be booted back to the lock screen and the message "Unfortunately the process com.android.systemui has stopped." The phone will then function normally. Now when it freezes I just hold down the power button until the phone restarts since it's quicker.
I haven't installed any new apps recently so I don't think it's down to that. Sometimes before the phone freezes it will stutter badly for about 20 seconds. Would appreciate any help. Running stock 4.4.4.
Would be helpful if you could post your logcat/dmesg. That way we can have a look and narrow down the problem
kilowatt95 said:
Would be helpful if you could post your logcat/dmesg. That way we can have a look and narrow down the problem
Click to expand...
Click to collapse
If you let me know how to do that I'll be happy to oblige
ipodgeenie said:
If you let me know how to do that I'll be happy to oblige
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2185929
Make sure you enable USB debugging. I believe in this case logcat is more important than dmesg.
kilowatt95 said:
http://forum.xda-developers.com/showthread.php?t=2185929
Make sure you enable USB debugging. I believe in this case logcat is more important than dmesg.
Click to expand...
Click to collapse
I tried using SysLog but I don't have root access so I cannot export any logs. Also, I do not have access to a computer. Any suggestions?
Thanks!
Are you using CM or some other type of themes? I used to see that often. So I stopped using them.
KJ said:
Are you using CM or some other type of themes? I used to see that often. So I stopped using them.
Click to expand...
Click to collapse
Nope, it's completely stock.
ipodgeenie said:
Nope, it's completely stock.
Click to expand...
Click to collapse
Unfortunately afaik as of JB you either need root for logcat or access to a computer.
I'm just taking a shot in the dark here but perhaps try wiping the cache partition from recovery? You don't need a custom recovery to wipe cache.
Sent from my Nexus 5 using XDA Free mobile app
try dirty flash stock rom. but check if it is deodexed or odexed.
edit: you mean its rooted but stock rom or is it just non-rooted?
chimmychenga said:
try dirty flash stock rom. but check if it is deodexed or odexed.
edit: you mean its rooted but stock rom or is it just non-rooted?
Click to expand...
Click to collapse
It isn't rooted