problems with recovery and roms - Verizon HTC One (M8)

So here is my problem. Every time I flash a recovery, my rom gets deleted, so I flash another one. I know this, because EVERY TIME I reboot, it goes straight to recovery. But, when I flash a rom, my recovery gets deleted. So I flash recovery again... It's an endless cycle.
Even stock recovery doesn't work. It just shows a screen with a red triangle with an exclamation point inside of it. So, I either don't have a rom, or don't have recovery.
I have S-OFF with firewater and I am trying to flash skyfall and TWRP.
What the hell is going on? This has NEVER happened with any other phone I have owned.

Thread closed.
Please only start ONE thread about a particular issue. This one is fine.
http://forum.xda-developers.com/showthread.php?t=2728079
Thanks.

Related

Bootloop help

So I was cruising around the Nexus S forums and found a rom I liked after I unlocked and rooted my phone.
I flashed Paranoid Android and then flashed the Matr1x kernel. Thus putting me in a neverending bootloop.
No ability to go back to CWM so I can't restore. And I can't put it in download mode so no ODIN.
What the heck do I do?
Can anyone help?
BTW if this is actually called a soft brick I'm sorry my terminology might be off.
Also I did this because the last phone I did extensive flashing with was an HTC Inspire 4G and it was easy to flash stuff just clear everything and flash what you wanted no bootloops. Sadly this phone not so much.
Hmm... No recovery...I've been stuck in a bootloop but I had recovery!
Sorry for the useless post, I cant help you..
Are you able to get into bootloader?
Usually when a bootloop occurs you should still be able to go in recovery.
When you say "no ability to access CWM" do you mean ROM Manager? Or the recovery mode?
What happens when you try to access the recovery mode?
same issue like urs
http://forum.xda-developers.com/showthread.php?t=1775933
try clean install;
flash Rom-Wiper.zip
flash Dalvik-Wiper.zip
then;
factory reset,
Format the system, data, cache, boot & partitions of your device.
I mean no access to recovery. CWM is Clock Work Mod Recovery. I have no access to fastboot either. The only thing my phone can do is bootloop.
You have to be mistaken.
Press power and volume up to get into fastboot ( bootloader). Then pick recovery....
That rom or kernel will not erase recovery. If your phone is in a bootloop it is making it past the bootloader
So it appears it as if I was mistaken. I got into fastboot and booted into CWM I'm still confused as to what I did, but I think I corrupted the Kernel.
It was the weirdest thing though. I tried it at least a dozen times, then I tried to run down the battery and try it again afterwards, and it didn't work so I gave up. Then I tried it again about 5 minutes ago and it worked. I'm sorry I cause you guys so much confusion. I've been doing this for so long I guess I just didn't doubt I was doing it right.

NS4G CWM/Recovery Flash Issues

So. I'm sorry to say, but this phone has given the biggest headache. Here's the background:
I really only use this phone for entertainment and stuff. BUT I decided to root and unlock the bootloader, somehow or another the phone apparently lost root a few times (According to some users here) but never lost SuperUser or anything. I've never been able to flash a rom on this thing. Then a few weeks ago the phone just encountered an error of some sort and would only get to the ICS boot animation and loop over and over. I just gave up on it. Then one day I decided to play with it. I got it into fastboot and then into recovery, (Not CWM Recovery) and was able to get it all set up again. So I figured I'd give it one more shot. I downloaded CWM and downloaded recovery, and a custom rom. tried to flash through fastboot>recovery but it's still the stock recovery, not CWM recovery. So I factory resetted it etc and started from scratch. Now if I download CWM it WILL NOT download recovery. It gets about 99% of the way and tells me: "An error occurred while attempting to run privileged commands!" If I download it from a link I can't open the file....... Someone help I just want a good JellyBean Rom. :crying:
Edit: I've Googled as much as I could stand and still haven't come across anything entirely helpful. Please explain so I could understand. Pictures help if needed lol
Anyone?
You can't use clockworkmod app to flash recovery without root.
Get the fastboot image of cwm recovery ( not the app). Or twrp. Flash it with fastboot.
Boot directly into it and flash what you want. If you boot up a stock os it overwrites the custom recovery on boot.
clockworkmod app sucks IMHO and should never be used for anything period. Not fond of the recovery itself either.

[Q] Flashed new kernel, won't boot

I used Hasoon2000's HTC All-In-One Kit to root my phone. That all worked.
The issue came when i flashed a new kernel. I placed the boot.img from King Kang's new ROM (http://forum.xda-developers.com/showthread.php?t=1959099)
Anyway, When i boot I get the HTC, quietly brilliant logo, and this in red letters "This build is for development purposes only. Do not distrubute... "
i can boot into recovery (pwr+ vol down)
And i get the ***TAMPERED*** AND ***unlocked*** tags at the top
I don't know where to go from here...
Thanks for the help.
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
ccamwilkins said:
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
Click to expand...
Click to collapse
You mentioned in your original post that you could boot into recovery, so is that not working now? Factory reset might've fubared the recovery piece, so you could do one of two things:
1) download the original RUU version for your phone, relock your phone, and flash the RUU and start over.
2) try reinstalling TWRP.
This whole thing sounds like trying to install a kernel or fastboot flash a boot.img without SuperSU correctly installed. This is what happened to me when I first unlocked my phone and tried to fastboot flash the CM10 boot.img after failing the flash from recovery twice. Without that super-user permission, bad things tend to happen. If you decide to continue on with reinstalling TWRP, make sure SuperSU.zip is flashed successfully from
TWRP, then try your rom/kernel combination again (or even a different combination if you're apprehensive).
BEWARE: sometimes partially flashing these things can corrupt your sd card. I had to reflash the original RUU to fix my phone BEFORE I rerooted and flashed a rom/kernel.
Have you fastbooted a SU to your phone after you rooted and unlocked? I'd imagine you did if you followed the toolkit.. So your on 2.20... Just download cleanrom 5.1 on your computer. Mount sdcard via recovery and drag cleanrom onto phone. Flash entire rom in recovery. I bet it works
Once your on a stable rom, download king kang from your phone. Download flashgui. Open flashgui app, navigate to king kang and let it find the boot img and flash it for you.. Once successful, immediately boot into recovery and flash entire rom through twrp.
Success
Sent from my One X using Tapatalk 2

[Q] TWRP Recovery Keeps Being Deleted

I keep flashing TWRP recovery but upon rebooting it keeps getting reset. I dont have stock recovery nor TWRP. I read another thread that mentioned stock recovery being reinstalled upon reboot, but im not even getting stock.
Once i flash TWRP, i can get into it, but after rebooting its back to nothing. Anyone know whats up?
Thanks guys
Delete the files that keep flashing over your recovery. There's a sticky in general

Bricked Shield (wifi) tablet after flashing 6.0 update

Last night, I downloaded the 6.0 update, copied the .zip to external storage, rebooted to CWM, and flashed it (successfully), then flashed SuperSU over it, cleared dalvik, and rebooted.
Since then, I'm stuck with the Nvidia boot screen. I can use Power/Vol Up to get in to fastboot, but when I try to boot back into recovery, the screen goes black, but goes back to the Nvidia boot screen instead of booting to recovery, even after flashing a recovery image to it via fastboot.
I can probably fix this with enough time and tinkering, but I just came back from a two week from vacation at work and don't have the time to futz around with this. Posting here in case someone already has an idea on what the problem is/how to fix this.
Update: I was able to get back into recovery using TWRP referenced in http://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541. Direct link is https://www.androidfilehost.com/?fid=24345424848487676.
I'm thinking this is a kernel issue.
This was a kernel issue. Flashing a older OTA (http://ota.nvidia.com/ota/data/post...wf-full_ota-36442_589.1541.20150826095201.zip) and booting normally, then rebooting to bootloader and fastbooting the CWM image worked. I'm restoring from a backup I took before flashing the update last night, then flashing TWRP, backing up, and trying this all over again.
Thank you, I was having the same issue :good:
Have the exact same issue, except that now, for some reason, I can't even get the device to turn on!

Categories

Resources