Database Info

[Q]Urgent Need HELP !!!

guys , i was trying to flash the devices to stock roms 2.3.5
and it show FAIL in the odin mode .... after that i restart my phone and now my phone only stuck at a screen which is : [Phone]..[exclamation mark]..[PC]
did i bricked my phone ???
any solution please ?

juhn300308 said:
guys , i was trying to flash the devices to stock roms 2.3.5
and it show FAIL in the odin mode .... after that i restart my phone and now my phone only stuck at a screen which is : [Phone]..[exclamation mark]..[PC]
did i bricked my phone ???
any solution please ?
Click to expand...
Click to collapse
Don't worry. It is a soft brick.
Flash any stock ROM
http://forum.xda-developers.com/showthread.php?t=1004647
Go to the above thread and dl XXKPE and XXKPQ
Flashing guides: http://forum.xda-developers.com/showthread.php?t=1133787

rockyddroid said:
Don't worry. It is a soft brick.
Flash any stock ROM
http://forum.xda-developers.com/showthread.php?t=1004647
Go to the above thread and dl XXKPE and XXKPQ
Flashing guides: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
bro , there is no more available download....
[This file is either removed due to copyright claim or is deleted by the uploader.]
what should i do next

and 1 more things i wanna ask , my previos roms was 2.2.1
and now i alrdy success flash my devices with DXKP9 , but it keep repeat the samsung animation there , the phone just cant get in android ..... what should i do next , pls help me

juhn300308 said:
and 1 more things i wanna ask , my previos roms was 2.2.1
and now i alrdy success flash my devices with DXKP9 , but it keep repeat the samsung animation there , the phone just cant get in android ..... what should i do next , pls help me
Click to expand...
Click to collapse
ur into a bootloop dat is because of not proper reading.. from froyo to gb..u need xxkpe as d base..thn other gb roms..
SO..!
dude..relax...curiosity kills d cat...
get to downloading mode..
flash xxkpe... first... xxkpe..and the instructions can be found in asswome kkrraazzyy's thread for stock roms..
xxkpe is MUST to move on to gingrbread...
aftr xxkpe flash whatever u want to...
dxkp9..or xxkpq or whatever u want too..
hope i helped...

go www.sammobile.com download the firmware dxkf1.
u will get 3 files after unzip.
flash with the pit file.
Take out battery than reboot download mode.
flash those 3 files.
or try flash dxkp9 again with bootloader update check.
do not check the efs clear!!
read and understand all the steps beforehand.
Sent from my GT-I9003 using Tapatalk

it took me 20 mins..
i found it for u.
http://hotfile.com/dl/141734402/4e31a5a/I9003XXKPE.zip.html
this is the link for xxkpe...
Run Odin3 v1.83
Turn the phone Off. Set phone to download mode : Press Volume down + Home Key first, then hold Power button.
Connect USB cable and the program will detect the phone’s Com number.
Add these files to respective tabs.
PIT – latona_20110114.pit,
BOOTLOADER – APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5,
Phone – MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5,
PDA – CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5,
CSC – GT-I9003-CSC-MULTI-OXAKPE.tar.md5,
VERIFY all the files...
As soon as the phone is successfully updated with the latest version of XXKPE 2.3.4, you will have to now clear the cache from your phone so that all the cache data is being erased. To erase the same, you will have to first go into the recovery mode which can be done by first switching your phone off and then long press the volume up key, press Menu as holding both the buttons press the power button to start. You can see that after device gets switched ON, you will find options like clear cache data. You can clear that by selecting options Wipe data/factory reset and also you need to select Wipe Cache partition after which you need to reboot your device by selecting reboot system
FLASH XXKPE TWICE
thn flash any gb rom u want to STOCK ROMS.. cz custom roms are diffrnt ball game al together..
phewww... i hope m clear..

after few treis , finally get my phone back to life ........ thanks to all of your's help and the thanks button is pressed ~

its an easy fix
go to either of these page
sammobile dot com
click firmware ( 3 times to go actual firmware page)
and then type gt-i9003
or
samsung-updates dot com
(since i am new user i cant post links)
download any of the 2.3.6 or 2.3.5 depending on your likes.
use odin to flash but make sure if your phone is working first put connection mode to USB mode, and from application development choose install from Unknown Sources and USB debugging mode. Then go to Downloading Mode and flash using ODIN. Once done your phone will restart and give it around 45 seconds you will see it stuck at samsung logo. once its there take out your battery and put it back and then enter Recovery mode. there first do
"Factory Data Reset" and then "Delete Cache". then reboot the phone
this will fix your phone and it will work like charm.

Big Problem ! [HELP] Failes to mount/data

Hey guys !
I'm hoping that you can help me resolve this issue.
I was flashing XXKPE with partition and after the flash process ended,on the screen appeared:
E:Failed to mount /data(No such file or directory)
-- Copying media files...
E:failed to mount /sdcard (file exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, please use UI menu for format and reboot action.
Meida files copy failed
# MANUAL MODE #
-- Applying Multi-CSC...
Applied the CSC-code 'KOR'.
Successfully applied multi-CSC.
And I can't do anything.
I tried flashing with pit,without pit,tried flashing another rom. No success.
Any idea what it could be?
Is the sdcard damaged? And if yes,how much does it cost to repair it.
Tnx !

If I'm not wrong(I can't really confirm), your internal SD is corrupt . what I would do is flash a kernel with cwm recovery, boot to recovery and under mounts and storage wipe system and everything except SD ext and the important ones so your phone won't get screwed(I forget the options, you could list them here and I can point them out). Then boot to download mode and flash from the start. If this doesn't work then idk what would

bscraze said:
If I'm not wrong(I can't really confirm), your internal SD is corrupt . what I would do is flash a kernel with cwm recovery, boot to recovery and under mounts and storage wipe system and everything except SD ext and the important ones so your phone won't get screwed(I forget the options, you could list them here and I can point them out). Then boot to download mode and flash from the start. If this doesn't work then idk what would
Click to expand...
Click to collapse
I installed BCK kernel. And formated everything but no succes. It's stuck at the GT-I9003 screen.
:crying:

U clashed a new ROM after wiping? Also, you could try mounting /data before wiping data.

bscraze said:
U clashed a new ROM after wiping? Also, you could try mounting /data before wiping data.
Click to expand...
Click to collapse
First i will let it charge(I hope it's charging right now) . Then i will try again.
Do you think that if i send my phone to the Samsung Shop ( I still have warranty) Will they repair my device? It's a little over the hand for me to send it to SAmsung because I bought it from Germany and I'm from Romania. I have to ship it there to a friend to send it to the repair shop.

sherbibv said:
First i will let it charge(I hope it's charging right now) . Then i will try again.
Do you think that if i send my phone to the Samsung Shop ( I still have warranty) Will they repair my device? It's a little over the hand for me to send it to SAmsung because I bought it from Germany and I'm from Romania. I have to ship it there to a friend to send it to the repair shop.
Click to expand...
Click to collapse
I'm not sure, maybe you can flash a stock ROM and say that kies screwed your phone up.

bscraze said:
I'm not sure, maybe you can flash a stock ROM and say that kies screwed your phone up.
Click to expand...
Click to collapse
I'm now on froyo.
I'll send it to Germany and tell them that I tried to update and the phone crashed immediately after the installation was successful. And then I tried to revive the phone by installing froyo but no success.
Sounds like a good plan ! But the problem is that I don't know how much it's going to take them to return my SL. It could take them over a month. I'll be missing it
Tnx for your help buddy ! Hope things will work out fine in the end.:good:

sherbibv said:
I'm now on froyo.
I'll send it to Germany and tell them that I tried to update and the phone crashed immediately after the installation was successful. And then I tried to revive the phone by installing froyo but no success.
Sounds like a good plan ! But the problem is that I don't know how much it's going to take them to return my SL. It could take them over a month. I'll be missing it
Tnx for your help buddy ! Hope things will work out fine in the end.:good:
Click to expand...
Click to collapse
Your phone will get repaired within 1 week.

sherbibv said:
I'm now on froyo.
I'll send it to Germany and tell them that I tried to update and the phone crashed immediately after the installation was successful. And then I tried to revive the phone by installing froyo but no success.
Sounds like a good plan ! But the problem is that I don't know how much it's going to take them to return my SL. It could take them over a month. I'll be missing it
Tnx for your help buddy ! Hope things will work out fine in the end.:good:
Click to expand...
Click to collapse
Don't think you should tell them you tried to install froyo. Just say kies screwed it

bscraze said:
Don't think you should tell them you tried to install froyo. Just say kies screwed it
Click to expand...
Click to collapse
Probably your right

vishal24387 said:
Your phone will get repaired within 1 week.
Click to expand...
Click to collapse
I sure hope so

The PIT file always create problem when installing a stock rom. U can install the XXKPE by:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config.

pranshah said:
The PIT file always create problem when installing a stock rom. U can install the XXKPE by:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config.
Click to expand...
Click to collapse
I' have allready donw that.No succes.I flash XXKPE with PIT all the time.

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help

ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....

ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.

first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:

malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.

MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies

ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.

mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?

ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there

so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0

Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...

ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy

LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.

mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?

ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..

mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>

ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

stuck up at no boot or recovery image

Hi geeks of this forum
I am stuck up at Fastboot mode- no boot or recovery image after i tried flashing my jz054k to JRO03E ... i was using nexus root toolkit 1.6.3. SO i happened to restore which lead to this problem. I am trying my best to get through it but all failures. PLs help me!
I love my Nexus s
Model number i9020kc1 :crying:

Him85 said:
Hi geeks of this forum
I am stuck up at Fastboot mode- no boot or recovery image after i tried flashing my jz054k to JRO03E ... i was using nexus root toolkit 1.6.3. SO i happened to restore which lead to this problem. I am trying my best to get through it but all failures. PLs help me!
I love my Nexus s
Model number i9020kc1 :crying:
Click to expand...
Click to collapse
... ... http://forum.xda-developers.com/showthread.php?p=42324740#post42324740 ... ...

Setting.Out said:
... ... http://forum.xda-developers.com/showthread.php?p=42324740#post42324740 ... ...
Click to expand...
Click to collapse
i have tried some CMW 6.x.x.x.IMG recovery types... but al failures... Unable to atleast see the home screen to do something. Only "NO BOOT OR RECOVERY IMAGE" is seen all time...
Pls Guide Me Through Proper Instruction..."Setting Out" ..pls..

Him85 said:
i have tried some CMW 6.x.x.x.IMG recovery types... but al failures... Unable to atleast see the home screen to do something. Only "NO BOOT OR RECOVERY IMAGE" is seen all time...
Pls Guide Me Through Proper Instruction..."Setting Out" ..pls..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1766475
Download this program for your computer, follow the instructions, Flash your phone back to stock (using bricked mode), You will need to re-install a custom recovery, and then flash in the rom ect...
Make sure you do a clean flash, for ANYTHING you install on your phone..

Setting.Out said:
http://forum.xda-developers.com/showthread.php?t=1766475
Download this program for your computer, follow the instructions, Flash your phone back to stock (using bricked mode), You will need to re-install a custom recovery, and then flash in the rom ect...
Make sure you do a clean flash, for ANYTHING you install on your phone..
Click to expand...
Click to collapse
yeah had actually installed this program and have gone into this mess.. Can u guide me .....i kno w i am going kiddish in this .. but yes ofcourse for this time because i want to see my nexus back to life

Him85 said:
yeah had actually installed this program and have gone into this mess.. Can u guide me .....i kno w i am going kiddish in this .. but yes ofcourse for this time because i want to see my nexus back to life
Click to expand...
Click to collapse
1. make some coffee
2. get a comfy chair
3. read, read, read...
4. now that you have read about your issue and how to use the toolkit.. (while you are shaking your head no, and are just continuing to read only this...)
5. I am assuming that you are unlocked and have the correct drivers installed, because you already read and followed the instructions.. ;P
6. Boot into your bootloader.. (volume + and power)
7. Open the program (nexus root toolkit)
8. Plug your phone into your computer using the usb cable
9. Using the program, click the "flash to stock" (bricked) option.. If your device isn't recognized, or connected.. You missed a step while you were reading and learning about how to use the toolkit.. or if you don't have a recovery image, you need to find one, or possibly the tookit can download it for you..
10. Keep clicking "ok"
11. A black box will open on your computer.. telling you that it's fixing your phone.. your phone will reboot and you'll celebrate!!..
Now you have a restored to stock phone, without a custom recovery, it isn't rooted, but it is unlocked..
12. You want a custom phone?
13. Use the toolkit that you have now mastered.. because you read on how to do this..
14. Download the .zip files you want to install on your phone (making sure that it is for your phone, as wrong files will break your phone) transfer them to your phone...
15. You open and use the toolkit, ADVANCED/ BOOT RECOVERY... WIPE (DALVIK, CACHE, DATA)/ INSTALL ZIP(s) wiping dalvik and cache for additional installs.. ROM, then KERNEL, then ect..
16. You become addicted to flashing, thinking you can make it better, faster, better battery..
17. You break it again and re-read this, and the other forums you didn't read the first time.. and start over again.. lol..

Setting.Out said:
1. make some coffee
2. get a comfy chair
3. read, read, read...
4. now that you have read about your issue and how to use the toolkit.. (while you are shaking your head no, and are just continuing to read only this...)
5. I am assuming that you are unlocked and have the correct drivers installed, because you already read and followed the instructions.. ;P
6. Boot into your bootloader.. (volume + and power)
7. Open the program (nexus root toolkit)
8. Plug your phone into your computer using the usb cable
9. Using the program, click the "flash to stock" (bricked) option.. If your device isn't recognized, or connected.. You missed a step while you were reading and learning about how to use the toolkit.. or if you don't have a recovery image, you need to find one, or possibly the tookit can download it for you..
10. Keep clicking "ok"
11. A black box will open on your computer.. telling you that it's fixing your phone.. your phone will reboot and you'll celebrate!!..
Now you have a restored to stock phone, without a custom recovery, it isn't rooted, but it is unlocked..
12. You want a custom phone?
13. Use the toolkit that you have now mastered.. because you read on how to do this..
14. Download the .zip files you want to install on your phone (making sure that it is for your phone, as wrong files will break your phone) transfer them to your phone...
15. You open and use the toolkit, ADVANCED/ BOOT RECOVERY... WIPE (DALVIK, CACHE, DATA)/ INSTALL ZIP(s) wiping dalvik and cache for additional installs.. ROM, then KERNEL, then ect..
16. You become addicted to flashing, thinking you can make it better, faster, better battery..
17. You break it again and re-read this, and the other forums you didn't read the first time.. and start over again.. lol..
Click to expand...
Click to collapse
Hey!!
Thanks for awesome tip
I could finally do it
Thanks a ton for sparing your precious time U rock!!

odin
Him85 said:
Hi geeks of this forum
I am stuck up at Fastboot mode- no boot or recovery image after i tried flashing my jz054k to JRO03E ... i was using nexus root toolkit 1.6.3. SO i happened to restore which lead to this problem. I am trying my best to get through it but all failures. PLs help me!
I love my Nexus s
Model number i9020kc1 :crying:
Click to expand...
Click to collapse
you can try a odin file to reinstall rom.

!! HELP !! phone stuck in bootloop

i have a lyf flame phone it was working fine but after intalling xposedv72sdk22.zip it got into booloop(struck on bootlogo)
i have tried:
1. wipe data/factory reset
2. wipe cache partion
it is on stock recovery and rooted.tried installing zips but signature verification error.
there is no stock rom available on the net for this phone.
help me to repair it as i want to enjoy 4g sim!

You have corrupted your system files and in this situation factory resetting the device is useless as its only deletes user data, not what you changed. Also can you verify if this website is talking about your model specifically since you as you haven't specified a model for your device... Reset your Flame phone.

rehone in bootloop
sir there is no stock rom for my device
can i install one of the flame's model stock rom?will it hard brick my device?
please tell me another solution:crying::crying:.help:crying:

Could you tell me your phone's model please

ls-4001 (lyf flame 3)

i also want frimware there are no frimware of lyf flame 3 mt device is bricked i have solution but frimware is not availble help me

You will need to find someone with the same phone and backup the firmware from there

No one upload stuff for lyf flame 3

!!!!solved!!!!
nirmal cartoon said:
No one upload stuff for lyf flame 3
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B7Fr6NRtO--MYjdyWHdNVGFaeXM/view?usp=drivesdk
download firmware from here and flash it.
hit thanks if helped!

pratyaksh tyagi said:
https://drive.google.com/file/d/0B7Fr6NRtO--MYjdyWHdNVGFaeXM/view?usp=drivesdk
download firmware from here and flash it.
hit thanks if helped!
Click to expand...
Click to collapse
Thank s bro

how to flash
Please guide how to flash file...

Just download and extract it.
Open upgrade download.
Connect using USB cable holding vol down button. And click on play icon.
Flashing will start. Done

Thanks for guiding....
I am away from my PC
When I flash it will give feedback
Tnx again

No success
Downloaded and extract in PC
Open Upgrade download exe
Connected USB cable with holding down volume ( vibration mode )
Hit play icon but no flashing start...
Something did wrong but i can't get it

chandrakhatri82 said:
Downloaded and extract in PC
Open Upgrade download exe
Connected USB cable with holding down volume ( vibration mode )
Hit play icon but no flashing start...
Something did wrong but i can't get it
Click to expand...
Click to collapse
you have done something wrong.check these steps:
1. Once you open upgrade download. click on play before connecting your device.
2. remove battery for 10s~15s and then put it back again.
3. hold only vol down button and connect usb.
4 done....
here is a link to spreadtrum drivers:*(first install them)*
http://smkdrivers.blogspot.in/p/spreadtrum-spd-all-usb-drivers.html
hit thanks if helped.
you can google for driver. if this didn't helped.
or follow this video
https://www.youtube.com/watch?v=mm7zyjH-JoA

pratyaksh tyagi said:
you have done something wrong.check these steps:
1. Once you open upgrade download. click on play before connecting your device.
2. remove battery for 10s~15s and then put it back again.
3. hold only vol down button and connect usb.
4 done....
here is a link to spreadtrum drivers:*(first install them)*
http://smkdrivers.blogspot.in/p/spreadtrum-spd-all-usb-drivers.html
hit thanks if helped.
you can google for driver. if this didn't helped.
or follow this video
https://www.youtube.com/watch?v=mm7zyjH-JoA
Click to expand...
Click to collapse
Tried but software not detecting mobile

chandrakhatri82 said:
Tried but software not detecting mobile
Click to expand...
Click to collapse
i was also puzzeled in this step to flash, but at last i did with stictly following the steps.
if you followed all of them correctly then you would have flashed your device 100%.
as you said you were not able to flash you can ensure that:
1. your device is of sprdtrum chip(ls-4001) and not of MTK.
2. wipe cache/ partition and data before flash.
3. install SPRD Device drivers(!most important!)
4. retry
LINK TO DRIVERS- https://androidmtk.com/install-spreadtrum-usb-driver-manually EXTREMELY IMPORTANT STEP
revert back with sucess or failure

My Jio Phone is boot loop. So plz help me with firmware