Database Info

Recover a soft bricked I9003 Galaxy SL

This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !

thanx buddy for this info

Ya sure !
Sent from my GT I9003 using XDA app-
Galaxy SL
CF Root
XXKPH
Cranium Rom V.3.1

All trials failed
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks

rizo99 said:
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks
Click to expand...
Click to collapse
First flash xxkpe
then kpq (or jpkpe)

rizo99 said:
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks
Click to expand...
Click to collapse
Your phone still enters recovery mode right.. and Enter into Download mode and Flash XXKPE with latona.pit .. then see if it boots up correctly.. then flash XXKPQ...

Bricked Phone
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
I recovered my phone!!! thanks to this post http://forum.xda-developers.com/showthread.php?t=1486616 Thank you all devs and xda...you don't know how I love you at this moment

The__Ripper said:
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
Click to expand...
Click to collapse
how were you able to flash anything if phone was switched off

The__Ripper said:
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
I recovered my phone!!! thanks to this post http://forum.xda-developers.com/showthread.php?t=1486616 Thank you all devs and xda...you don't know how I love you at this moment
Click to expand...
Click to collapse
Yea exactly what devilhell said. Its impossible to hardbrick your phone technically if you haven't flashed any bootloader on it.
Cheers
Sent from my GT-i9003 powered by MIUI

As long as your boot partition and recovery partition is not corrupted your phone is recoverable. If boot partition is corrupt your phone will not boot. So as long as your phone boots it is recoverable.
Sent from my GT-I9003 using XDA App

Deep in my heart we do beleave xda shall over come some days
Adi_Pat said:
This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !
Click to expand...
Click to collapse
# Dont need to hardreset. Just follow simple procedure and done.. Thank you. Thanks a lot xda-dev.
NB: I bricked my GT-i9003 v.3.2.6... I just follow the guide and read the xda members how to 3/4 times. ANd i dont get any problems at all... Oh my OS version downgrade from Gingerbread 3.6 to Froyo 2.2 .

Thanks, you saved me!
I flash KPQ but device not boot
Download mode working, device not boot, the screen turns on and off for a second
I flash I9003XEKB1 and device boot!
Thanks!!

Thanks...! Really helped me!

Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?

lichongwei said:
Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?
Click to expand...
Click to collapse
For a single file, no need to partition. Reflash the right way and it'll be alright
Cheers
Sent from my GT-i9003 powered by MIUI

lichongwei said:
Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?
Click to expand...
Click to collapse
Initialy, u no need to flash pit file.
now, u have to reflash xxkpe with have 4 files.
Read first the flash guide b4 flash again.
Sent from my GT-I9003 using Tapatalk

i9003 dead
I had my phone i9003 flashed to a i9000 stock rom by a total mistake.
I had both pit files on my PC so I mixed up by a mistake.
Now my device is completely dead and nothing works out. Not even charging, completely unusable now.
Hardware reset, JIG's and combination keys, ODIN setups..nothing takes me to download mode.
Phone is still under warranty so afraid to JTAG.
Do you all think my phone is recoverable? Will the samsung warranty tech's will find out about the issue and won't the claim?
Please help. tried everything and now clueless.

Hy,
my problem is,
that the storage is not prepared yet.so says the phone.also please use UI menu for format and reboot action.
and
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
I have no idea what to .
I've reflashed xxkpe everything.
I have amits kernel to format all partitions, everything wipt and and and
But nothing has helped
can someone please help me there?
P.S: kernel panic mode occurs when I remove the sdcard

xXCorleoneXx said:
Hy,
my problem is,
that the storage is not prepared yet.so says the phone.also please use UI menu for format and reboot action.
and
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
I have no idea what to .
I've reflashed xxkpe everything.
I have amits kernel to format all partitions, everything wipt and and and
But nothing has helped
can someone please help me there?
P.S: kernel panic mode occurs when I remove the sdcard
Click to expand...
Click to collapse
Did u convert the system to ext4 because ı had a problem like this with mobile odin and after first boot it says as you faced but when i convert the system and all the others to ext4 with chainfire ext app. Everything was ok.
Sent from my GT-I9003 using Tapatalk

prb in samsung galaxy s gt-i9003
well i have a simple question i have samsung S gt i9003 and i just update the software through my cell its in the option and after dl and installing the it stopped during istallation and it says update fail!!! kernel verify fail and red screen appears and dissappear after 2sec now i can only do download mood so can anyone help me wat to do?

Phone Stuck on I5801 Help Please

Guyz my phone was rebooting since the last few days and yesterday it suddenly stuck on the I5801 logo. I tried going into to recovery mode and reseting the data but it dint work it was getting stuck there to like it kept on going and tried it a few times.I dont remmeber if i have ticked the usb debugging option and i dont know how to proceed but my phone goes into downloading mode wen i press the keys for it so can any tell me a solution to it .Thanks in advance im kind a new to this but i know how to flash using odin so i wanted to ask should i flash the kernel or rom and which one

download any .tar ROM like kyrillos rom and flash it via odin
connect the phone to download mode and then open odin and select the .ops file and tick one package and select the .tar rom you have downloaded and then click start
once the download is complete, wipe data in the recovery (it automatically enters it)
and then reboot
enjoy

Thanks alot ill try it out

my friend gave this link i flashed it accourding to this
://androidadvices.com/samsung-galaxy-3-gt-i5801-steps-install-official-froyo-ddjp6-22-firmware/2/
now my phone is stuck on
-- delete app data.....
Delete files,please wait.
i tried going into recovery but same thing happens.

Im not familiar with androidadvices.com so cant say why that would happen, I know that there is stock firmware available on here is you search STOCK FIRMWARE you will find it. download one you want to unzip it, flash the .tar file via odin and factory reset and wipe dalvik cache. this should solve any problems you have.

http://forum.xda-developers.com/showthread.php?t=1497261
download JPU and flash it via odin

My gti5801 is stuck on recovery menu and i dont know what to do...

pull out the battery and reflash your rom with odin

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help

ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....

ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.

first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:

malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.

MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies

ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.

mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?

ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there

so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0

Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...

ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy

LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.

mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?

ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..

mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>

ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

I cant instal cwm on my phone i9105

Hi ..
pleas help me to instal cwm in my phone i9105 , i use odin v 3.7 and instal CWMtouch-i9105_chotu.tar and finish is ok and restart phone ,
put when i go into cwm mod no change can you help me to root my phone ????

In Odin when flashing CWM, untick auto-reboot, when Odin is done flashing, it will not exit download mode, it will say something like RQT_CLOSE... Which means that you may know pull out the battery, and put it back in, then try to boot into recovery.

The problem is, that when you boot Android it overwrites CWM with the standard recovery. Here's what I did to stop that:
http://forum.xda-developers.com/showpost.php?p=42000557&postcount=91

I have those steps, but unfortunately, the same problem ???
Any there steps ???

Try to install This one http://d-h.st/oKe thanks to k2wl. This is same just download put to odin and flash Done!

oubwers that
also be sure to Press "Volume Up + Home + Power" until CWM appears, badly i saw somewhere to push Volume Down instead of Up...

LUV YA
panda00 said:
in odin when flashing cwm, untick auto-reboot, when odin is done flashing, it will not exit download mode, it will say something like rqt_close... Which means that you may know pull out the battery, and put it back in, then try to boot into recovery.
Click to expand...
Click to collapse
dude you saved me thaks big time :d you rock

Hi guys,
I made CWM touch for the newly released 4.2.2
My samsung is now rooted.
https://www.dropbox.com/s/eeuuo5s44r2nvkp/Jerry_recovery.tar.md5
Please make more mirrors for me, and thank me by clicking the thank you button and saying my name
YES YES YES !!!
Install with Odin > PDA.

Please Help . I need your help Developers....

Hello , I'm parsa...
I root and flash recovery(cwm) and rom(cm) on my friend galaxy fit .... there wasn't problem until next day ... he told me that device doesn't boot..
I tried to flash stock firmware on it and flashed but it doesn't work again and hangs on this page :
I follow instructions step by step to unbrick it but it doesn't work again .... :crying:
please tell me what can i do???what should I do??
I'm very embarrassed about it...help me...
thanks for helps...

I would recommend to you follow this thread http://forum.xda-developers.com/showthread.php?p=51886671#post51886671

Thanks But when I flash custom recovery it says : "E:/can't mount system or directory ..." and just can flash stock firmware so then device hangs on that page....
and I can't wipe data/system(factory reset) in recovery...again hangs on that page..
I installed drivers and wanted to use One Click Unbrick but computer can't detect device ( I tried with 2 pc )...
I really don't know what should i do??? I tried every things...
please tell your friend and devlopers because i don't know any body here...thanks...

did you remove your battery and flashed again rom or cwm ?

maybe , I don't remember .... it's about 2month ago....
DO you find a way??
I search but didn't find any way...

what is your telephone status now.did you proceed to download and recovery mode.ıf you login to download or recovery mode it easy.

Yes can..
Yes I can go to Download Mod and Recovery but when select reboot or wipe data in recovery , hangs on that page...
Yesterday I brick device to use one click unbrick but didn't detect phone , But I flash stock rom again and now I can go to download and recovery...
Click to expand...
Click to collapse
What's your Idea??
My PC OS : Windows 7 Ultimate 64-bit
Click to expand...
Click to collapse

Reboot to Odin mode and connect your mobile to your PC. Download Odin to your PC. Then search a method on how to flash stock rom on Galaxy Fit with Odin. Follow the instructions.
---------------------------------
Hope I helped you! If I did , then why not press that Thanks button under my post...

Thanks , But I know That and Do all of them ... Please read from first post...My problem is when i flash Stock rom(firmware) phone stop on this page ...
it happened when go to recovery and press reboot or wipe data/system(factory reset) too...

Awww... Sorry dude... Cant help you with that :/
-----------------------------------------
Hope I helped you! If I did , then why not press that Thanks button under my post...

Colud you take backup from your sd card and formatted again and put rom and recovery versions you have.and test again
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12&nocache=1&z=1710748479235917
and follow

First of all, the phone is not bricked, obviously as long as it has a recovery and will turn on at all. As for a fix, try a seperate-file firmware flash, google "upgrade galaxy fit to 2.3.4", or something like that, also, try flashing a CWM recovery with ODIN, and just flash a CM7 ZIP or any other ROM, it will not be able to mount /system/ beucase the default samsung SYSTEM format is EFS, which CWM can not read, it can only read EXT file systems, soooo, install the recovery and a custom ROM, see what happens

Flash Froyo!
Hey there,I also suffered a lot sue to this ! Ultimately i flashed a froyo rom and everything was back to normal! :good:

@Enymous
Just ask ur friend what he did to the phone!!:sly:
Usb debugging needs to be enabled.
Next thing is:- Stop worrying!! Flash the same firmware version(if u remembered exactly) which came preinstalled from factory. It may b froyo or gingerbread. Download that particular firmware & note that if u were having froyo preinstalled & have downloaded the same exact firmware, then it must be a 4 package firmware(i.e. containing 4 files when u uncompress it). U can use Odin 4.42 & follow this sequence (even if u know) :
*Install Samsung mobile drivers on pc.
*Take out & reinsert battery.
*Press "HOME,POWER,VOLUME-DOWN" buttons together for download mode.
*Launch Odin 4.42 as administrator.
* Connect the phone to pc & wait till u see COM PORT mapping box turned yellow.
* Now set the files from the froyo package that u downloaded in exactly the same sequence as follows:
OPS: BENI_v1.0.ops
BOOT: APBOOT_S5670.....tar.md5
PHONE: MODEM_S5670.....tar.md5
PDA: CODE_S5670.....tar.md5
CSC: CSC_S5670.....tar.md5
Press start & wait till u see "PASSED"
Meanwhile ur phone will reboot.
Then it will b back to life(with froyo) guaranteed.
First try these steps!! I know it 100% works. coz I m used to all these issues.
Good Luck!!:thumbup:
Hope this helps...!!