Related
I lost my wall charger that came with my HP touchpad. The round plug thingie is what I'm looking for. Searching on Amazon brings up a number of items, for example:
http://www.amazon.com/HP-North-American-Charger-TouchPad/dp/B0055QYJJM/ref=dp_cp_ob_e_title_3
However, is there an alternative that works? I was able to use the Evo cable rather than the original HP sync/charge cable that came with the wall charger, but is there an alternative wall plug that works as well? Paying almost $28 for a charging cable seems a bit ridiculous.
Any help and advice would be most appreciated.
[[FOUND MY ANSWER]]
I found that Walmart was having a sale on the North American charger with the barrel wall connector for $11.99 and Meritline was having a sale for 6' long USB to micro-usb cables (pair for $4.99 no tax/shipping).
The listing on the Meritline page says that the cables are compatible with the Evo.
Given that the cable that comes with the HP barrel charger is pretty much monkey spit and fails within a month, I found a solution that works for less than $20.
Links are below:
Walmart HP Touchpad charger
http://www.walmart.com/ip/HP-TouchPad-Accessory-Travel-AC-Wall-Adapter-Charger/16641536
Meritline Cables (use this code MLCK222YNL1 for discount (cannot guarantee how long this code is good for, drops the price for a twin pack of the 6' cables from $10.99 to $4.99)
http://www.meritline.com/showproduc...e=6-feet-high-speed-micro-hdmi-cable-ethernet
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
dmarchant said:
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
Click to expand...
Click to collapse
Thank you for the advice. To be more specific, can you recommend any alternative charging cables/wall charger units specifically?
Any brand name USB charger that gives off 2 amps should be fine. I tend to stay away from really cheap generic chargers. Any microUSB cable should be fine even a generic one if it has decent reviews. I worry about generic chargers since a poorly regulated one could send a voltage too high, but generic cables should be fine.
The chargers I am currently using, as well as the one that came with the TP, are the one that came with a Blackberry Playbook and the one from my HTC Desire HD.
The Blackberry charger gives an error on the screen that it may not charge the TP, but as it gives 2 amps, charges in pretty much the same time as the official unit.
The HTC again gives the warning and takes about twice as long to charge.
what about the nook color charger i know it higher amps might work as well
cesar2010 said:
what about the nook color charger i know it higher amps might work as well
Click to expand...
Click to collapse
I just tested the TP with a charger for the NC, and unfortunately, it still gives the same "may not charge" warning...
There is NO after market charger that will charge at full rate like the HP barrel charger!
At best they will trickle charge at a much lower rate and take considerably longer to charge.
The TP relies on precise signaling which it will only get from the OEM item or specially modded after market units or cables.
Do a google for further info ie webosnation.com forums.
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Izeltokatl said:
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Click to expand...
Click to collapse
They will not work at full rate!
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Don't believe all the hype about using ONLY the HP charger, there are many that do the job perfectly well. Too many people make these authoritarian statements and all they do is cause FUD.
At my office, I use the AC charger from my last Samsung phone (mythic) and it works IDENTICALLY to the OEM one. I have also used a Moto and and LG with NO PROBLEMS. I have no issues getting to fully charged in little time.
At home, my OEM cable is plugged into a high-power USB port (2.1A, I believe) and it has no problem charging from near zero to full as well. Front or top-mounted USB ports tend to be 500mA or less, but the rear ones (coming directly off the motherboard) tend to have a higher supply. I also use a non-HP USB cable occasionally and it works fine.
(I got my TP during the original fire-sale and have been charging it these ways ever since with ZERO ISSUES.)
R1ptide said:
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Click to expand...
Click to collapse
The small voltage difference is marginal and isn't going to matter, the internal hardware should be able to tolerate a few tenths of a volt difference. In fact, I tested my Motorola charger rated at 5.1v and the Touchpad charger rated at 5.2v on a multimeter. The Motorola charger was outputting 5.20v and the Touchpad charger 5.16v. Granted this is at no load, but switching transformers are regulated so they should supply rated voltage at any current draw equal to or less than rated. Also depending on how well the voltage is regulated there may still be a slight AC ripple that the device has to deal with.
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
sirclesam said:
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
Click to expand...
Click to collapse
Its all down to the charge rate that the TP is able to draw.
2A which is theoretically possible from TP AC barrel charger would charge the 6A+ battery of the TP from flat to full in approximately 6.5 hours.
If the BB charger were able to have 500mA drawn by the TP then it would fully charge in approximately 26 hours.
The charges would be no different.
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
stuart_f said:
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
Click to expand...
Click to collapse
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
pa49 said:
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
Click to expand...
Click to collapse
oh, for the love of gods. REALLY? I was just asking for a replacement cable. I don't want to reinvent the charging paradigm. I just need a simple recommendation for a cable. If a thread could be highjacked any further I don't know how it could be.
I appreciate all your "advice" but seriously, this is NOT what I was asking.
Anyone know if I can get a similar cable in the UK? Kind of lost my TP cable, and I miss the flexibility the long cable gave me, it was so much easier to use on charge!
well i know that my tbolt cable works. i have to use the tp adapter though. my tbolt adapter makes the touchpad say that the charger is incompatible.
Has anyone managed to get a car charger for this phone?
I've just tried to charge the phone with my car charger modded to "AC" mode by shorting the middle pins... and the S4 gets nada...
Have they changed the charging mechanics?
Is that what's going on? I was wondering what the heck was wrong with my charger!
Yup, the car charger still charges my old HTC, even with the Samsung cable... so there's definitely something different inside the charger...
I have a 2A usb car charger with generic cable to charge my devices. It's nothing special, but it works with my S4. Hope that helps.
http://www.monoprice.com/products/p...=10826&cs_id=1082603&p_id=8858&seq=1&format=2
I have this charger and it charges my GS4. Of course, I bought it 2 years ago.
EDIT: I guess it helps when I paste the link. Duh... http://www.amazon.com/Verizon-Vehicle-Charger-USB-Port/dp/B003NA0658
I have a 500mA car charger and it didn't work. Even though it worked on my Xperia Z. I bought a 2A charger from Maplin and it works just fine.
Sent from my GT-I9505 using Tapatalk 2
delete
moobieboobie said:
I have a 2A usb car charger with generic cable to charge my devices. It's nothing special, but it works with my S4. Hope that helps.
http://www.monoprice.com/products/p...=10826&cs_id=1082603&p_id=8858&seq=1&format=2
Click to expand...
Click to collapse
I also have the same charger works just fine.
Sent via Galaxy S4
Hmmm will have to look into getting a decent 2A charger then and NOT modifying it...
So I opened up my car charger and un-modded it back to original and it works like a charm now
I've got a 1A Belkin car charger and it seems to overload after a while when charging my gs4.
The green light on it blinks and my phone makes that sound when you plug in the charger.
Takes a while for it to happen but gets more frequent the longer you have it plugged in.
The charger works fine with my gf's nexus 4.
ttsprnkls said:
I've got a 1A Belkin car charger and it seems to overload after a while when charging my gs4.
The green light on it blinks and my phone makes that sound when you plug in the charger.
Takes a while for it to happen but gets more frequent the longer you have it plugged in.
The charger works fine with my gf's nexus 4.
Click to expand...
Click to collapse
I'm using the Motorola charger (big blue circle). Got it for my Razr Maxx a year or so ago (I've gone through like 4 phones since then) and it works wonderfully. It's the best micro-USB car charger I've ever seen. Coiled cord, huge blue light (but not too bright since it's an ambient-style light), and charges quickly.
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Seriously, the best car charger I've ever owned. 950mA is also one of the highest car chargers I've used.
I used to have that same motorola charger but I just switched to this one by SPIGEN: http://www.amazon.com/gp/product/B0069EGLFY/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
It charges at the same amperage as the stock wall charger that came with the S4. I use the Galaxy Charging Current app to check.
5280WRX said:
I used to have that same motorola charger but I just switched to this one by SPIGEN: http://www.amazon.com/gp/product/B0069EGLFY/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
It charges at the same amperage as the stock wall charger that came with the S4. I use the Galaxy Charging Current app to check.
Click to expand...
Click to collapse
really 1900mAh??
if you say "yes" i'll order one
5280WRX said:
I used to have that same motorola charger but I just switched to this one by SPIGEN: ...
It charges at the same amperage as the stock wall charger that came with the S4. I use the Galaxy Charging Current app to check.
Click to expand...
Click to collapse
Do you use it with the original cable or a generic one? I read that there are some differences in charging amount using also different cables. This SPIGEN Car charger looks very interesting. Thanks!
TrueTenacity said:
Has anyone managed to get a car charger for this phone?
I've just tried to charge the phone with my car charger modded to "AC" mode by shorting the middle pins... and the S4 gets nada...
Have they changed the charging mechanics?
Click to expand...
Click to collapse
I have tired a few most only charged at 400-500 m-amps (aka running with gps and screen on discharged it faster then it was charging) with some random picks at fry's i found one that was marked 3 amp charger that whould do 780 m-amps so the phone still makes head way chargeing while being used as GPS
FYI the tool i use to measure says the Samsung charger is 1900 M-amps and my apple ipad charging brink is 1400 just for reference.
tool is Galaxy Charging Current Lite i would link it but the forum will not let me
Trueglich said:
I have tired a few most only charged at 400-500 m-amps (aka running with gps and screen on discharged it faster then it was charging) with some random picks at fry's i found one that was marked 3 amp charger that whould do 780 m-amps so the phone still makes head way chargeing while being used as GPS
FYI the tool i use to measure says the Samsung charger is 1900 M-amps and my apple ipad charging brink is 1400 just for reference.
tool is Galaxy Charging Current Lite i would link it but the forum will not let me
Click to expand...
Click to collapse
You can also use elixir 2, the battery stats will give amps while discharging and change when charging. I think it uses the current_now as reference.
I have a 2a usb car charger and I just use the usb cable from the phone. I bought the car charger from best buy.
Sent from my SCH-I545 using Tapatalk 4 Beta
fabian_b_m said:
Do you use it with the original cable or a generic one? I read that there are some differences in charging amount using also different cables. This SPIGEN Car charger looks very interesting. Thanks!
Click to expand...
Click to collapse
Different USB cables do pass different current even if using the same charging main. From tests I've done so far, a generic 3 ft USB 2.0 cable I randomly purchased online only allowed around 400 mA. An old Blackberry Torch 9810 cable allowed around 1200 mA. Original cable that came with the S4 allows 1900 mA. These numbers are from using the original wall charger main that came with phone.
Sent from my SGH-I337M using xda app-developers app
I bought an anker car charger and mediabridge charging usb cable and it's a great combo. The images of the anker car charger is different, should be dual usb ports.
http://www.amazon.com/Anker®-2-4A-2...=1375543576&sr=1-1&keywords=anker+car+charger
http://www.amazon.com/gp/product/B009W34X1I/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
I don't know the exact current I'm getting, but from the battery monitor widget app, I'm seeing at least 1amp or higher of positive current.
I know this is a bad subject to bring into discussion but notice the S4 charger for the wall charger charges faster I bought a generic car charger for my last phone and it couldn't even keep up with the charge if I was using the GPS...... Any idea what a good car charger brand is or even Samsung makes for for the S4? I really would like a nice car charger that won't screw things up with my phone thanks all if you can just put your input if not thats ok too...
i bought this http://www.amazon.co.uk/MOFRED®-Mic...sr=1-1&keywords=samsung+galaxy+s4+car+charger should be good
The Motorola with the blue light, pn SPN5400A.
I am also looking for a car charger that quickly charges the battery like the stock wall charger. I went from 1% to 50% in around 45 minutes with the stock wall charger the other day.
Try to find a 2000mA (2A) car charger
i would just get something like this i were you guys. I have one and it works great http://www.ebay.com/itm/171038027580?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Xcor3 said:
i would just get something like this i were you guys. I have one and it works great http://www.ebay.com/itm/171038027580?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Click to expand...
Click to collapse
its 1 amp.
get at least a 2 amp charger @ OP
I agree 2Amp tends to be the way to go from what im learning but still looking for a great car charger lol
Is there a way within the UI to see how much charge the phone is getting? I have a generic USB car charger and I want to know if it's .5, 1, or 2 amps.
Generally I'm happy if I can use Google Maps navigation on a charger without losing any battery % but it would still be nice to know if I'm getting the fastest charge possible.
snakecharmer23 said:
Is there a way within the UI to see how much charge the phone is getting? I have a generic USB car charger and I want to know if it's .5, 1, or 2 amps.
Generally I'm happy if I can use Google Maps navigation on a charger without losing any battery % but it would still be nice to know if I'm getting the fastest charge possible.
Click to expand...
Click to collapse
Not that I know of but I am not too good when it comes to these kinds of questions lol sorry
snakecharmer23 said:
Is there a way within the UI to see how much charge the phone is getting? I have a generic USB car charger and I want to know if it's .5, 1, or 2 amps.
Generally I'm happy if I can use Google Maps navigation on a charger without losing any battery % but it would still be nice to know if I'm getting the fastest charge possible.
Click to expand...
Click to collapse
Generic car chargers, usually offers 700mah or 1000mah for the most.
It seems that getting 2000mah charger is the only good solution.
snakecharmer23 said:
Is there a way within the UI to see how much charge the phone is getting? I have a generic USB car charger and I want to know if it's .5, 1, or 2 amps.
Generally I'm happy if I can use Google Maps navigation on a charger without losing any battery % but it would still be nice to know if I'm getting the fastest charge possible.
Click to expand...
Click to collapse
Battery Monitor Widget from the market will. It shows discharge rate when off charge on charging rate when on charger.
Sent from my SPH-L720 using xda app-developers app
snakecharmer23 said:
Is there a way within the UI to see how much charge the phone is getting? I have a generic USB car charger and I want to know if it's .5, 1, or 2 amps.
Generally I'm happy if I can use Google Maps navigation on a charger without losing any battery % but it would still be nice to know if I'm getting the fastest charge possible.
Click to expand...
Click to collapse
Battery Monitor Widget can show you the charging rate. I have the Pro version.
Sent from my Nexus 7 using Tapatalk 2
swieder711 said:
Battery Monitor Widget can show you the charging rate. I have the Pro version.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Could you show a screen shot of where that app shows the charging rate?
I bought one from best buy it charges just as good or even faster than the stock charger. It's a Rocket fish 3 amp
Sent from my SPH-L720 using xda premium
Beastn said:
I bought one from best buy it charges just as good or even faster than the stock charger. It's a Rocket fish 3 amp
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
I have the same one. Works great.
Just keep in mind battery monitor widget does a best guess calculation on Samsung devices because Sammy refuses to put the code in that reports the actual current. Back on GB on my Captivate one of the roms had the code and it was nice but Samsung in its infinite wisdom deems it more important to include 500MB of bloat and omit this tiny important driver.
---------- Post added at 08:37 PM ---------- Previous post was at 08:16 PM ----------
Here are a few screen shots
http://pcsites.com/ebay/2013-05-11 20.19.41.png
http://pcsites.com/ebay//2013-05-11 20.19.49.png
http://pcsites.com/ebay//2013-05-11 20.28.15.png
I am considering 2 http://www.amazon.com/Release-Bolse...UTF8&colid=2YCT75R10D09V&coliid=IX3MOZIVWPAU4
or
http://www.amazon.com/Lightening-Ch...TF8&colid=2YCT75R10D09V&coliid=I1H99YUA2ZS8XI
Can someone recommend a car charger that I can buy in the UK that can charge the S4 reliably at 2A? I tried a few so-called 2A chargers, but they are only able to deliver 1.1A (as measured by the Galaxy Current App), while the wall charger delivers 1.9A.
Mr.Pintu said:
Can someone recommend a car charger that I can buy in the UK that can charge the S4 reliably at 2A? I tried a few so-called 2A chargers, but they are only able to deliver 1.1A (as measured by the Galaxy Current App), while the wall charger delivers 1.9A.
Click to expand...
Click to collapse
I've ordered this 2a charger for the car and am just waiting for it to arrive now (from South Korea...).
http://www.ebay.co.uk/itm/221224291949?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
Pleomax is apparently a subsidiary company of Samsung, so I'm expecting compatibility/functionality to be good.
I ordered the following holder to go with it too, from the same manufacturer and seller, its currently in the same shipment as the charger:
http://www.ebay.co.uk/itm/SAMSUNG-G...AU_MobilePhoneAccessories&hash=item4ac397a9c3
Mr.Pintu said:
Can someone recommend a car charger that I can buy in the UK that can charge the S4 reliably at 2A? I tried a few so-called 2A chargers, but they are only able to deliver 1.1A (as measured by the Galaxy Current App), while the wall charger delivers 1.9A.
Click to expand...
Click to collapse
Just to point out.... While you do need a 2A+ charger, the cable also plays a huge factor. I've measured anywhere from 460mA to 1900mA depending on the cable plugged into it.
Sent from my SGH-M919 using xda premium
Gday All,
I realise that this topic has been mentioned in a few threads, but from what I could find, there is no definiteve fix.
Is there a way to disable this so that a non-genuine charger will work once the screen turns off, or if I was to root the device, is there then a way to do it.
Please dont flame me, I'm a total newb to android, and I dont mind admitting that.
Bit dissapointed that Samsung has sunk to this.
TIA!
Not sure what issues you are having but I have been using a few different chargers without issue. Which exact charging method are you trying to use (cable type, charger type, charger rated output voltage and amperage)?
Sent from my SM-P900 using Tapatalk
The problem isn't that the charger is 3rd party.
The problem is that the device requires a 5.1V 2A charger or higher.
Anything lower than that is simply not powerful enough. You can find these specs in small lettering on the charger. Most cheap 3rd party launchers are 5V 1A.
CrazyManR32 said:
Gday All,
I realise that this topic has been mentioned in a few threads, but from what I could find, there is no definiteve fix.
Is there a way to disable this so that a non-genuine charger will work once the screen turns off, or if I was to root the device, is there then a way to do it.
Please dont flame me, I'm a total newb to android, and I dont mind admitting that.
Bit dissapointed that Samsung has sunk to this.
TIA!
Click to expand...
Click to collapse
I was one of the ones having problems with it needing to have the screen on to charge. It was a problem with the charger (yes, it was marked as a high amperage charger), changed to a different one (Anker 40W 5 port) and it's working fine.
ericbergan said:
I was one of the ones having problems with it needing to have the screen on to charge. It was a problem with the charger (yes, it was marked as a high amperage charger), changed to a different one (Anker 40W 5 port) and it's working fine.
Click to expand...
Click to collapse
Huge second on the Anker. I love that charger by the way. With various devices I would get irritated with some refusing to charge on certain chargers (my BlackBerry Bold in particular). I've since switched to the Anker 5 port 40 Watt and no longer worry about which cable I'm reaching for. Every device gets the power it needs with no fuss.
muzzy996 said:
Not sure what issues you are having but I have been using a few different chargers without issue. Which exact charging method are you trying to use (cable type, charger type, charger rated output voltage and amperage)?
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
Initially i was using a belkin 2 port, 2.1amp per port charger, which would start charging but stop once the screen was off.
ShadowLea said:
The problem isn't that the charger is 3rd party.
The problem is that the device requires a 5.1V 2A charger or higher.
Anything lower than that is simply not powerful enough. You can find these specs in small lettering on the charger. Most cheap 3rd party launchers are 5V 1A.
Click to expand...
Click to collapse
This seems logical, but it does work when i use the genuine charger from my sgs3 which is a 5vdc 1a charger. Takes all night to charge, but charges non the less.
ericbergan said:
I was one of the ones having problems with it needing to have the screen on to charge. It was a problem with the charger (yes, it was marked as a high amperage charger), changed to a different one (Anker 40W 5 port) and it's working fine.
Click to expand...
Click to collapse
Thanks for the info mate, ill see if i can get hold of one of these in australia, that being said, it appears that these are also 5v rather then the 5.3?
CrazyManR32 said:
This seems logical, but it does work when i use the genuine charger from my sgs3 which is a 5vdc 1a charger. Takes all night to charge, but charges non the less.
Click to expand...
Click to collapse
That's because the retention rate of the S3's charger is higher than that of a generic cheap 3rd party one. Where the S3 charger actually delivers 0.8-1A, the cheaper ones usually average around 0.5A.
This is why charging over a usb 2.0 port without any power boosts also (usually, there have been some exceptions) doesn't work.
I usually charge mine with my Note 3 or S5 charger, as the three are all the same charger.
Hi, guys and gals..
Does anyone know if ifs possibly let to get a car charger capable of fast charging my S6?
UK Sellers Only.
PaulN543 said:
Hi, guys and gals..
Does anyone know if ifs possibly let to get a car charger capable of fast charging my S6?
UK Sellers Only.
Click to expand...
Click to collapse
On amazon there are some 2.1A.
http://www.amazon.co.uk/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=fast charger in car
Looking for a 9v 1.67A if possible like the stock Samsung wall charger
PaulN543 said:
Looking for a 9v 1.67A if possible like the stock Samsung wall charger
Click to expand...
Click to collapse
Mind if I ask, as i'm not really into this.
Does it 'damage' anything, if using 2.1A, as I already have such a charger?
Faspaiso said:
Mind if I ask, as i'm not really into this.
Does it 'damage' anything, if using 2.1A, as I already have such a charger?
Click to expand...
Click to collapse
I have a Maxboost car charger that I bought from Amazon (US). And it has two USB ports. One 2.0 amps and the second is 2.4 amps. I've used both on my iPhone 6 and Note 4 without any issues.
Sent from my SM-N910W8
Faspaiso said:
Mind if I ask, as i'm not really into this.
Does it 'damage' anything, if using 2.1A, as I already have such a charger?
Click to expand...
Click to collapse
It's not like the charger "pushes" current into your phone, but rather how much current the charger is able to provide if a device tries to "pull" that amount of energy from the charger. A charger rated at wrong(to high) voltage will on the other hand damage your device.
paalkr said:
It's not like the charger "pushes" current into your phone, but rather how much current the charger is able to provide if a device tries to "pull" that amount of energy from the charger. A charger rated at wrong(to high) voltage will on the other hand damage your device.
Click to expand...
Click to collapse
So shortly, Amp doesn't matter, but Voltage do?
Voltage should be 5, right?
Choetech makes a 4 port CLA. Works great on my GS6.
I can't post links yet but if you are Jedi material you can figure it out.
Xxw.amazon.co.uk/gp/aw/d/B00SOJA43W/ref=mp_s_a_1_2?qid=1431275858&sr=8-2&pi=AC_SY200_QL40&keywords=choetech+quick+charge&dpPl=1&dpID=41enbLJ8nNL&ref=plSrch
I bought one of these from Amazon it supports the Qualcomm fast charging
Quick Charge 2.0 iVoler Adaptive Fast Turbo Rapid Car Charger
http://www.amazon.co.uk/gp/aw/d/B00V68OHAO