Struggling to go back to 8.0 with Recovery Software - Nokia Lumia 1020

I'd like to go back to 8.0. I have O2 branded firmware, updated to 8.1 by the dev app means and that all went fine. However subsequently I've tried to use the Nokia Software Recovery programme to roll back to 8.0 and I just get an 'InternalError' message as soon as it starts to try and download the 8.0 firmware. I've also tried recovering by flashing the firmware for O2 via the software flashing guide on XDA but again it fails to download. I've made sure that Windows Firewall is off so it's not blocking the app.
Is there an issue with Nokia's servers or am I just doing something wrong?
My understanding - before I even updated to 8.1 - was that (unofficially) you could roll back quite easily as long as you have a PC and a bit of time available.

leoni1980 said:
I'd like to go back to 8.0. I have O2 branded firmware, updated to 8.1 by the dev app means and that all went fine. However subsequently I've tried to use the Nokia Software Recovery programme to roll back to 8.0 and I just get an 'InternalError' message as soon as it starts to try and download the 8.0 firmware. I've also tried recovering by flashing the firmware for O2 via the software flashing guide on XDA but again it fails to download. I've made sure that Windows Firewall is off so it's not blocking the app.
Is there an issue with Nokia's servers or am I just doing something wrong?
My understanding - before I even updated to 8.1 - was that (unofficially) you could roll back quite easily as long as you have a PC and a bit of time available.
Click to expand...
Click to collapse
Hi. I installed on my windows 8 pc the nokia software recovery tool, plugged my phone and went back to 8 on my lumia 1020. No problems at all. Any chance your internet connection is bad?

leoni1980 said:
via the software flashing guide on XDA but again it fails to download
Click to expand...
Click to collapse
You are talking about that one? http://forum.xda-developers.com/showthread.php?t=2515453

is it possible to debrand a rm 877 lumia at&t 1020? i remember triying for some time to do this in the past but gave up after trying a couple of rom's. All failed verification or something like this, the program didn't allow them to be flashed.
i also used the guide in the link.

motoi_bogdan said:
is it possible to debrand a rm 877 lumia at&t 1020? i remember triying for some time to do this in the past but gave up after trying a couple of rom's. All failed verification or something like this, the program didn't allow them to be flashed.
i also used the guide in the link.
Click to expand...
Click to collapse
No.

anaheiim said:
You are talking about that one? http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
Yes. But still call quality is bad. I have updated my 1020 to 8.1 again because the call quality was again bad for some calls.
The probable solution is a volume booster, or a jailbreak. Something we will not see in wp.

Related

Rogers 2.2 update is available through Kies

Yep...Go get it.
EDIT: I mean Kies...The update box was in my way when I was typing lol
So what is the ROM version name?
A.VOID said:
So what is the ROM version name?
Click to expand...
Click to collapse
Just a min, update failed...I think cause launcher pro was the default home...trying again damn it.
Someone post a odin copy.
?
Let the BRICKING begin!
Would love an ODIN of this ROM... looking forward to it!
Installed Kies... Update process starts but Kies crashes. Anyone else have this issue? I'm currently trying to unroot to see if that makes a difference.
Edit: Exact issue is: MSC.Thunder.FirmwareUpdate has stopped working.
Does it regardless if I choose to backup or not the contacts and data.
Edit 2: Unroot changes nothing.
Edit 3: Doing a factory reset on the device doesn't help either. WTF?
connected to Kies - message "This device will be supported soon"
Fortysixandtwo said:
connected to Kies - message "This device will be supported soon"
Click to expand...
Click to collapse
http://www.samsung.com/ca/support/detail/supportPrdDetail.do?menu=SP00&prd_ia_cd=01012200&prd_mdl_cd=SGH-I896ZKARWC&prd_mdl_name=SGH-I896&prd_ia_sub_class_cd=P#
Get it here
Wonder if it'll be 2.2.1...
Ok so I just got back from writing an exam and will try to reinstall Kies. I tried 2 times to update through my computer this morning and once on my wife's PC (She has a Captivate as well)
All 3 attempts it says that Its downloaded the update but then it fails when it tries to install. Now remember I've not rooted or anything, so i think that there might be a newer version of kies or something...going to look now.
But anyways it tries to update it says a bunch of stuff like: You phone Jsomething1 and the update is supposed to be Jsomething2...I dont get it.
Remember I dont hack or mod phones in the slightest, so I have no clue what this J1 (mine) and the update of j2 is...?
The update is big though, takes a few minutes to download and I have a 16mps download speed...
Downloading this version of Kies and will try again:
http://www.samsungapps.com/about/onPc.as
I'm with Rogers with an AT&T Captivate (Rooted and Cognition 2.3b6). Will I be able to update my device to it? I much prefer the Rogers software than AT&T's. I don't care if I have to use Odin or erase everything.
alexvtr said:
Installed Kies... Update process starts but Kies crashes. Anyone else have this issue? I'm currently trying to unroot to see if that makes a difference.
Edit: Exact issue is: MSC.Thunder.FirmwareUpdate has stopped working.
Does it regardless if I choose to backup or not the contacts and data.
Edit 2: Unroot changes nothing.
Edit 3: Doing a factory reset on the device doesn't help either. WTF?
Click to expand...
Click to collapse
What ROM are you on ?
Did you put the phone in recovery mode when you have the first pop up menu ?
ScottyNuttz said:
Wonder if it'll be 2.2.1...
Click to expand...
Click to collapse
Nope it's 2.2
Where does it say it was released?
gunstar3035 said:
Ok so I just got back from writing an exam and will try to reinstall Kies. I tried 2 times to update through my computer this morning and once on my wife's PC (She has a Captivate as well)
All 3 attempts it says that Its downloaded the update but then it fails when it tries to install. Now remember I've not rooted or anything, so i think that there might be a newer version of kies or something...going to look now.
But anyways it tries to update it says a bunch of stuff like: You phone Jsomething1 and the update is supposed to be Jsomething2...I dont get it.
Remember I dont hack or mod phones in the slightest, so I have no clue what this J1 (mine) and the update of j2 is...?
The update is big though, takes a few minutes to download and I have a 16mps download speed...
Click to expand...
Click to collapse
Did you put your phone in Recovery mode like the first pop up is asking ? (Unplug usb cable from phone (not the computer), power off the phone, Hold vol up/down button and plug usb cable. You should now be in download mode (black/yellow screen with a shovelling droid)
silvertag said:
What ROM are you on ?
Did you put the phone in recovery mode when you have the first pop up menu ?
Click to expand...
Click to collapse
Stock ROM from Rogers
No, not recovery mode.
PC runs W7-32 for what it's worth.
In the meantime, I did some research on the error I mentioned above.
It appears it's a very common issue with KIES.
There are a few workarounds.
So far, I tried the "SIM-out" method and it doesn't work for me.
Next, I'm trying the regedit method.
Will report on results.
@silvertag: your upgrade worked fine or you haven't tried yet?
Enhanced said:
Where does it say it was released?
Click to expand...
Click to collapse
Nowhere you have to check Kies server to know it's been released. There is still no confirmation from Rogers last i checked.
alexvtr said:
Stock ROM from Rogers
No, not recovery mode.
PC runs W7-32 for what it's worth.
In the meantime, I did some research on the error I mentioned above.
It appears it's a very common issue with KIES.
There are a few workarounds.
So far, I tried the "SIM-out" method and it doesn't work for me.
Next, I'm trying the regedit method.
Will report on results.
@silvertag: your upgrade worked fine or you haven't tried yet?
Click to expand...
Click to collapse
Yes it worked fine you HAVE to put the phone in download mode before you start downloading the update or it will fail at the upgrade part.

[Q] Samsung Omnia 7 with 7003 build

hi all,
I bought a samsung omnia 7 from ebay and it's got the 7003 build.
the nodo update didn't came till now. I've tried all the posibilities to update to nodo , but no luck. i've observed that most of the posibilities to update are for the build 7004. is there a way to install build 7004 on my phone?
thanks.
Did you try the special upgrade tool Microsoft just released a few days ago? I thought that was designed for this purpose.
check out the stick thread named "get nodo right now" or something like that
worked for my omnia
i've tried every posibility except the rom tools and still no update.
i cannot do anything with the method from thread "get nodo right now" because when I start the command application I select a language and after that the applications exits without any message.
Do you think that if I install another ROM with this method : http://forum.xda-developers.com/showthread.php?t=973420 .. it will help me?
snasninja said:
i've tried every posibility except the rom tools and still no update.
i cannot do anything with the method from thread "get nodo right now" because when I start the command application I select a language and after that the applications exits without any message.
Do you think that if I install another ROM with this method : http://forum.xda-developers.com/showthread.php?t=973420 .. it will help me?
Click to expand...
Click to collapse
You are in a much better position than the rest of us 7003ers. Fortunately, there have been Omnia 7 rom leaks so you should be able to easily flash any 7004 rom; from there you can go on to NoDo with minimum problems.
i will try to flash a new rom and see what hapens..
Thanks
i've tried to flash a rom with the WP7 downloaded application but it says "not a retail device".
any solutions?
snasninja said:
i've tried to flash a rom with the WP7 downloaded application but it says "not a retail device".
any solutions?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2530409
i've tried that too..
the message is:
The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Microsoft Update
Try the Update that Microsoft just made, it works for me
ulquiorra01 said:
Try the Update that Microsoft just made, it works for me
Click to expand...
Click to collapse
did you were in the same situation? build 7003?
what update microsoft just made?
Hello.. seems I am in the same boat with a HTC device I purchased off ebay.
After some googling it looks like ive got a pre release build.
Microsoft support tool released a couple of days ago does not detect the phone.
The command line update tool stops running after selecting the phone language.
Trying to work out some work around to fool the software in thinking there is a newer build on the phone.. somewhere in the registry?
jsv_90 said:
Hello.. seems I am in the same boat with a HTC device I purchased off ebay.
After some googling it looks like ive got a pre release build.
Microsoft support tool released a couple of days ago does not detect the phone.
The command line update tool stops running after selecting the phone language.
Click to expand...
Click to collapse
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.
dstreefkerk said:
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.
Click to expand...
Click to collapse
Are you sure you don't have a stolen demo phone?
Sent from my SGH-i917 using XDA Windows Phone 7 App
munkeyphyst said:
Are you sure you don't have a stolen demo phone?
Click to expand...
Click to collapse
Quite sure. The phone isn't stuck in demo mode. It works perfectly otherwise.
dstreefkerk said:
Quite sure. The phone isn't stuck in demo mode. It works perfectly otherwise.
Click to expand...
Click to collapse
Read here: http://forum.xda-developers.com/showthread.php?t=982626
Sent from my SGH-i917 using XDA Windows Phone 7 App
munkeyphyst said:
Read here: http://forum.xda-developers.com/showthread.php?t=982626
Sent from my SGH-i917 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I already said my phone wasn't a stolen/demo device.
dstreefkerk said:
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.
Click to expand...
Click to collapse
Yes! I'm finally off 7003, thanks to the ROM posted in the Focus developer section. I initially viewed it with scepticism as nobody else had success with it, but then again, nobody else was having the same problem as me - a Focus stuck on 7003.
My phone must be a developer device. I didn't even know that developer Focuses (Focii?) existed. The ROM shows up in WP7 Downloader as "WP7_ENGINEER", and users with retail devices couldn't flash with that image.
PavelX1 said:
one for Retail Devices that are signed by "WP7_PRODUCT" and one for Developer Devices - signed by "WP7_ENGINEER"
Click to expand...
Click to collapse
I've now moved from 7003 to 7390 thanks to the ROM flash procedure. It worked flawlessly.
Thanks so much for sharing the ROM, PavelX1!

[Q] I cant update my HTC TITAN to 8773.

Hello.
I cant update my HTC TITAN to 8773.
I have tried the disconnect trick and successfully update to 8112.
But when i to the trick again and get the update 8773 the update fails when Zune at step 7 fails to backup the phone. Nothing happans and finally the phone reboots and says that the update fails.
I have tried on 3 differint computors but no luck.
When i try the cab method (if I understoud it correctly) I also get failed.
Se print for error code. It says that I dont got any space on the phone but I have plenty 8gb free. I have also tried to reset ´phone to factory defaults but the same error. What to do?
Error:800705B4
And now when I open som installed appz on the phone nothing happens, only get a black screen and I have to press the "back" buttom in order to get the the program to start correctly.
Try installing this update: http://www.htc.com/www/help/htc-titan/#download
It is meant to fix the Zune updating errors for the HTC Titan
AndyFZ1S said:
Try installing this update:
It is meant to fix the Zune updating errors for the HTC Titan
Click to expand...
Click to collapse
Thx for the tip, I have tried it but there is still no change when i Try to install update after that I have installed this fix.
Still the phone dosent backup the phone in step 7 and then restarts and says update fail. Any other tip?
The only thing I can think of doing is to try and roll back to the previous version via Zune, No guarantees though, Sorry I cannot help other than that :-(
Is your phone a Branded Carrier handset? ie: at&t ? I would imagine if it is then at&t will have their own version of the update which of course you will have to wait for them to push it to your phone.
AndyFZ1S said:
The only thing I can think of doing is to try and roll back to the previous version via Zune, No guarantees though, Sorry I cannot help other than that :-(
Is your phone a Branded Carrier handset? ie: at&t ? I would imagine if it is then at&t will have their own version of the update which of course you will have to wait for them to push it to your phone.
Click to expand...
Click to collapse
When i Check zune I have no restore point
No my phone is not Branded (if you mean that my phone is looked to a cirten operator?).
I see that other members have succeeded with htc titan, what makes my phone so different
Can I get some kind of standard bakup from somwere?
Now that's a bummer, Strange there is no option to revert back to 8112 or even 8107, Did you hard reset after 8112? maybe worth a try.
Check the Titan (2011) forums and use search if you cannot find anything relevant.
AndyFZ1S said:
Now that's a bummer, Strange there is no option to revert back to 8112 or even 8107, Did you hard reset after 8112? maybe worth a try.
Check the Titan (2011) forums and use search if you cannot find anything relevant.
Click to expand...
Click to collapse
Its the version 8112 i got installed, but no option to revert to older version or previesly backup.
I have tried the hard reset 3 times allready but no luck
The phone also acts strange when i open apps, nothing happens only black background you then need to press back in order for the app to respond and open the program.
Ohh whant to have the old mango again
I have tried serching and found some problem look alike but no sollutions.
Edit: I have now installed "Dynamics7 v1.21 - Tango 8779, Full unlock" instead and the phone works nicely and is very fast

Help: Bricked HTC 8x

Hello,
After a failed Windows 10 upgrade attempt, my HTC 8x was working fine however after few days I attempted to soft reset it and all hell broke loose! Its stuck in reset gears loop ever since.
Note: Being a non-poster member (so far), I'm not allowed to post outside links so unable to post screenshots!
http: //s16.postimg.org/e58yok9th/image.jpg
http: //s1.postimg.org/jk31zmncf/image.jpg
I have tried the below however not successful, any help is appreciated...
1. Attempt to hard reset by holding down the volume down key while powering on the device > Result: Doesnt show the Exclamation ( ! ) symbol
2. Windows Phone Recovery tool doesnt detect the phone > choose my phone was not detected > Start the phone in boot loader mode by holding both volume up and down keys while powering on > It goes to boot loader mode however reports "Software package is not found on server"!
http: //s29.postimg.org/ivtb6n21j/image.jpg
3. RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE.exe and similar packages > Old package error
http: //s22.postimg.org/gfcdp55s1/NBFError.jpg
4. HTCDeviceInfo.exe successfully detects the device however HTCRomUpdater fails to flash .NBH file http: //s18.postimg.org/5kpf6h70p/HTCRom_Flashor_Error.jpg
5. FFUTool.exe doesnt detect the device! http: //s2.postimg.org/52daia255/FFUTool_Failure.jpg
6. Thor2 doesnt decte the device http: //s4.postimg.org/ei60y1b1p/Thor2_Error.jpg
Is there ANYTHING else I can do to get this device working? Or buying a new phone is the only solution?
Fixed!
I was able to fix the device using NSU with original firmware FFU.
Where did you find?
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
where did you find original firmware?
How were you able to install Windows 10 mobile on the 8X man? Can you do that again?
killerz0ne said:
How were you able to install Windows 10 mobile on the 8X man? Can you do that again?
Click to expand...
Click to collapse
windows phone 10 is not available for htc 8x now. old methods not work anymore now.
rza35 said:
windows phone 10 is not available for htc 8x now. old methods not work anymore now.
Click to expand...
Click to collapse
I am well aware of that. Do you guys think we will ever be able to install W10 on our phones. Contacted HTC support and they said that the 8X will not be compatible with W10 because of some hardware limitations, but they were not willing to tell specifics. What are the chances that we will be able to still install W10 by unofficial means?
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
Can you maybe go into a bit more detail on what you had to do to get the original firmware on the device? I'm having the same problem after getting the update from MS today.
mbrio said:
Can you maybe go into a bit more detail on what you had to do to get the original firmware on the device? I'm having the same problem after getting the update from MS today.
Click to expand...
Click to collapse
Same here. Installed Win10 update and phone is bricked. Need the detail and links to flash it
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
How did you do it, when I use NSU it doesn't want to recognise my 8x
The fact is that the update was sent to ALL HTC 8X in the world. Mine installed the update during the night without my consent.
Microsoft will probably blame Skynet for trying to terminate all and each 8x there is.
Well...Mine is broken now. I'll be waiting for official fixes.
WaGo! said:
The fact is that the update was sent to ALL HTC 8X in the world. Mine installed the update during the night without my consent.
Microsoft will probably blame Skynet for trying to terminate all and each 8x there is.
Well...Mine is broken now. I'll be waiting for official fixes.
Click to expand...
Click to collapse
Exactly. Still bricked (stuck in reboot loop) and waiting for some official guidance but so far nothing...
BrannanD said:
Exactly. Still bricked (stuck in reboot loop) and waiting for some official guidance but so far nothing...
Click to expand...
Click to collapse
My HTC 8x routine now:
1- Turn On.
2- Show message about the unsuccessful update.
3- Play the alarm (set to play daily at 7 am)
4- Turn Off.
5- GoToAndPlay(1) hahahahahahahha
Spent hours to restore some other rom, only got "INVALID VENDER ID" (sic) by the ROMUpdateUtility. My phone completed the update, seems to work fine, just reboots randomly after a couple of minutes. Had to setup wifi after a hard reset, otherwise apps were missing, including the Settings app. And the letters are tiny. This is sad and hilarious. Also, camera is gonsky.
gabest11 said:
Spent hours to restore some other rom, only got "INVALID VENDER ID" (sic) by the ROMUpdateUtility. My phone completed the update, seems to work fine, just reboots randomly after a couple of minutes. Had to setup wifi after a hard reset, otherwise apps were missing, including the Settings app. And the letters are tiny. This is sad and hilarious. Also, camera is gonsky.
Click to expand...
Click to collapse
Where did you get the ROMUpdateUtility (and a suitable ROM) from?
BrannanD said:
Where did you get the ROMUpdateUtility (and a suitable ROM) from?
Click to expand...
Click to collapse
I think you misunderstood me, no roms worked. There are many on the internet, even here on this forum. There seems to be an id in the phone and it does not match with the package.
Tried these with my t-mobile branded EU phone, all invalid.
RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.32.19.23_2_15.42.32_RETAIL_ENC_RELEASE
IMG_ACCORD_U_GDR2_00_S_HTC_Europe_3.41.401.01_1.17b.32.19.14_15.62b.32_RETAIL_ENC_RELEASE
RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE
Also talked with HTC live support, they have no idea of course.
Windows Phone Recovery Tool detects the phone, but can't offer any ROM.
terible
gabest11 said:
I think you misunderstood me, no roms worked. There are many on the internet, even here on this forum. There seems to be an id in the phone and it does not match with the package.
Tried these with my t-mobile branded EU phone, all invalid.
RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.32.19.23_2_15.42.32_RETAIL_ENC_RELEASE
IMG_ACCORD_U_GDR2_00_S_HTC_Europe_3.41.401.01_1.17b.32.19.14_15.62b.32_RETAIL_ENC_RELEASE
RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE
Also talked with HTC live support, they have no idea of course.
Windows Phone Recovery Tool detects the phone, but can't offer any ROM.
Click to expand...
Click to collapse
same issue. I installed Windows insider and enrolled fast program. yesterday, phone noticed me have an update. I downloaded and wait 10 hours, but it's still "migrating data ..."
I press power then back button, I see lockscreen and unlimmited number of password length. the live tile screen so miscellaneous and several app not access (phone, mess, setttings, store ..). It says " need go to store ...".
terrible ... I've tryed newest Windows phone recovery tool 2.1.2. It detect my phone but say "no software package on server"
did you check http://forum.xda-developers.com/htc-8x/development/ruu-collection-t2916107
Isich said:
did you check http://forum.xda-developers.com/htc-8x/development/ruu-collection-t2916107
Click to expand...
Click to collapse
Those links are all offline -> 404 error
What about this topic the procedure should be similar to flash http://forum.xda-developers.com/showthread.php?t=2137556
it has link to official rom HTC_Europe_2.00.401.03 which is at http://www.androidruu.com/?developer=Accord
http://matboot.blogspot.bg/2015/02/officestockupromhtc8xACCORD.html
My phone does not want to recognize the image files on a pen drive when I hold the cam button. It just boots Windows normally.
EDIT: Managed to buy an y-cable and the rom flashed from the pen drive! Back to 8.1 again.

Lumia 1020 updating to windows 10...with screenshot

download and extract the 7z file below then follow the step....
Wow. This is the neatest walk-through I ever saw.
I had unsuccessfully tried another instructions (not in XDA though) and left the work half way as I didn't understand the next step.
Thank you mate. You made my day. My 1020 now runs on Win10.
Hello!
I thought first, wow how cool and so simple ... Until after the flash shows the Bluescreen of death!! Yes, i have everything done correctly, sure. Fortunately, i was able to recover my phone with the recovery tool.
What is the Problem?
OK now i come to the rooting and the bootloader is unlocked!! But after rooting the following error message appears:
What is the megapixel options when updating to Windows 10?
check the version of your phone..only listed phone and its version can only availbale for this
Andolium said:
OK now i come to the rooting and the bootloader is unlocked!! But after rooting the following error message appears:
Click to expand...
Click to collapse
make something happen when flashing your phone...try to do it again use the ffu file dowwnloaded by recovery tool...and before doing that make sure you have the os version listed ..
Andolium said:
Hello!
I thought first, wow how cool and so simple ... Until after the flash shows the Bluescreen of death!! Yes, i have everything done correctly, sure. Fortunately, i was able to recover my phone with the recovery tool.
What is the Problem?
Click to expand...
Click to collapse
welcome....thats the only thing i can do to help to revive our phone
raghu13uk said:
Wow. This is the neatest walk-through I ever saw.
I had unsuccessfully tried another instructions (not in XDA though) and left the work half way as I didn't understand the next step.
Thank you mate. You made my day. My 1020 now runs on Win10.
Click to expand...
Click to collapse
Ok, my version is NOT listed but it is the latest windows 8.1 for the Lumia 1020. What can i do? Downgrade?
what version are you in?make an update so that your phone version can make it to list
Dimma1020 said:
What is the megapixel options when updating to Windows 10?
Click to expand...
Click to collapse
After updating I got some 20 megapixel camera.
But, after factory resetting (which is a recommended step) it went back to original megapixels. I could also install and use the Lumia camera.
So, now I have a 1020 with Windows 10, with 41 MP (or 38 MP in photo) camera.
raghu13uk said:
After updating I got some 20 megapixel camera.
But, after factory resetting (which is a recommended step) it went back to original megapixels. I could also install and use the Lumia camera.
So, now I have a 1020 with Windows 10, with 41 MP (or 38 MP in photo) camera.
Click to expand...
Click to collapse
Exactly what I wanted to hear! Thank you for letting me know!
thank you
thank you for the good feedback
I got an old OS build after updating to W10, 10586.107. The phone says there is no more update available.
Is the 8.1 --> 10 update made like this, or am I supposed to be able to run the latest W10 OS build on my 1020?
Nobody? Please tell me what build you are on if you have done this update.
thats the update for lumia 1020...if you want to have a higher version try enroll at insider program..
Dimma1020 said:
Nobody? Please tell me what build you are on if you have done this update.
Click to expand...
Click to collapse
yes you can..my phone running at version 14965
Dimma1020 said:
I got an old OS build after updating to W10, 10586.107. The phone says there is no more update available.
Is the 8.1 --> 10 update made like this, or am I supposed to be able to run the latest W10 OS build on my 1020?
Click to expand...
Click to collapse
So
1) Can you continue getting updates thereafter using the Insider fast ring or will you lose it on next update ?
2) How stable or fast/slow is the device soon after.
ryzel said:
thats the update for lumia 1020...if you want to have a higher version try enroll at insider program..
Click to expand...
Click to collapse
ryzel, firstly I want to thank you for your guide. I am very, very grateful! W10 is now running smoothly on my 1020.
However, I have tried all three alternatives in Insider. No update is available. I am very happy as it is, but it would be nice with a newer version. Can you give me a hint on what to do next?
did you already format your phone?if yes power of your phone...press camera key and connect it two your pc or laptop then the storage for main folder will be read..just like the part where you edit the registry.do that again....the latest update for windiws 10 w/out enrolling in insider was 14393...i think you can get that using that method...

Categories

Resources