Hello.
I've got problem with installing ROM Android Revolution HD 7.3. I bought Sensation, it's rooted, S-OFF, bootloader is unlocked, 4EXT Recovery Touch, I've flashed Universal Firmware 3.33. I done wipe data and wipe cache, flashed ROM but after reebot it's stuck on Beats logo. Nothings happened. I also tried do full wipe by superwipe script for Sensation, but that doesn't help. It still stucks on Beats logo. I aslo tried to flash boot.img via flashboot and cmd command. I unziped ROM file, found boot.img file for kernel which I want to install (faux) and flash it via fastboot. Then install ROM via installer included into ROM. After that it doesn't work either.
Can someone help me? I manage to flash different ROM: CM11 with ION and 3.0 kernel by Sultan, but i want to try Android Revolution HD. Maybe my battery will live longer
I appreciate any help.
how long did you wait on beats audio logo? because first boot up takes time
Couple of minutes. No longer then 10, for sure. You think I should wait longer?
robkow said:
Couple of minutes. No longer then 10, for sure. You think I should wait longer?
Click to expand...
Click to collapse
nope , i think 10 min is enought..
Ok. Maybe someone else have a solution.
By the way, I see you've got a ViperS 5.1.0 ROM. Could you tell me how it's works? Especially the battery lifespan.
robkow said:
Ok. Maybe someone else have a solution.
By the way, I see you've got a ViperS 5.1.0 ROM. Could you tell me how it's works? Especially the battery lifespan.
Click to expand...
Click to collapse
For me is great , but you have to try it yourself
for ARHD 7.3 ROM if it has in aroma installer to choose a kernel try with the stock one and see if it boots
make a full wipe from recovery before flashing the rom
I've already tried every one of 3 included. But I will try do it again now and wait for longer on Beats logo.
robkow said:
I've already tried every one of 3 included. But I will try do it again now and wait for longer on Beats logo.
Click to expand...
Click to collapse
what recovery do you have?
4EXT Recovery Touch v1.0.0.5 RC5
robkow said:
4EXT Recovery Touch v1.0.0.5 RC5
Click to expand...
Click to collapse
try to update to the latest one
even redownload the rom and check md5 sums
I reinstal ROM again and it works. I don't know why, but it works. Thanks everyone for help, though
Related
Hello people. I am using the HTC sensation z710e and it is running the sense o maniac ics room but I am having trouble flashing the virtuous quattro rc2 Ro. I downloaded the kernel for it and firmware and everything but when I try to flash it it just comes up cannot assertand some codes . Any body have a solution. And yes I wiped the data cache and dalvik cache before and restarted .
First of all do a nandroid backup. Then try to download files again, check md5 sum. Before flashing new rom make a full wipe. Hope this helps you
First make shure you Super CID your phone: http://forum.xda-developers.com/showthread.php?t=1192300 Step 4.
Then you need to flash the firmware directly from HBoot not in CWM oder something like this. look at http://forum.xda-developers.com/showthread.php?t=1412618 for more information. you need to place PG58IMG.zip on the top of your SDCard then you can flash it over HBoot...
hm im confused, ive already done a full backup and done the thing with file PG518.zip in hboot but iit still doesnt work.
Which firmware did you use? Quattro alpha2 and alpha3 need different firmwares.
im using the one ono there page, comb_keneral-WOB, if you know if its a different one can you please give me the link? you will be thanked XD OH FYI im now using the alpha 2 file again.
For Virtuous Quattro alpha 2, you should use this firmware.
THANK ALL OF YOU. YOU EACH GOT A THANKS. But..... I flashed it sucessfully ETC and when I rebooted the phone it is stuck as the virtous quattro blue image. It is not bricked as i pulled out the battery and it could go into the hboot menu thing. Anything? It;s been like this for 20 minutes and I dont know how much longer my battery will last
sensation lover said:
THANK ALL OF YOU. YOU EACH GOT A THANKS. But..... I flashed it sucessfully ETC and when I rebooted the phone it is stuck as the virtous quattro blue image. It is not bricked as i pulled out the battery and it could go into the hboot menu thing. Anything? It;s been like this for 20 minutes and I dont know how much longer my battery will last
Click to expand...
Click to collapse
Did you superwipe before flashing the ROM? Probably a good idea in the circumstances.
yeah i did that wipe already but it still isnt booting, i flashed back to the sense o maniac (sense 3.5 +android 4.0.3) rom and it worked. I tried ot flash back but it just gets stuck at the boot, still can charge when off and go into recovery. WHY inst this working for me !!!
I had the same issues after flashing the newest firmware (updatet 20.1) with alpha2 just wipeted everything und installed alpha3, After that it worked great.
Sent from my HTC Sensation using XDA App
el_fixit said:
I had the same issues after flashing the newest firmware (updatet 20.1) with alpha2 just wipeted everything und installed alpha3, After that it worked great.
Sent from my HTC Sensation using XDA App
Click to expand...
Click to collapse
That's what I was going to suggest next
Wipe --> 3.24 firmware --> Quattro alpha3.
To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.
What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".
Its not bricked.If u can enter recovery
Sent from my HTC sensation
Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse
DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Iv'e flashed every kernel i could find and used all different settings when installing but my phone stays on the HTC logo for about 3-4 minutes before starting up, even when rebooted 2-3 times its still the same iv'e tried wiping and installing rom again without flashing kernel an boot time is about 60 seconds so it must be the kernel messing up my device.anyone else have this problem?
ryanraven said:
Iv'e flashed every kernel i could find and used all different settings when installing but my phone stays on the HTC logo for about 3-4 minutes before starting up, even when rebooted 2-3 times its still the same iv'e tried wiping and installing rom again without flashing kernel an boot time is about 60 seconds so it must be the kernel messing up my device.anyone else have this problem?
Click to expand...
Click to collapse
if i was you i would try do a full wipe and then run an ruu, just to give yourself a fresh install. then place a custom recovery onto the phone again and install your rom of choice. if its still lagging then i dont know what it could be:/
heavy_metal_man said:
if i was you i would try do a full wipe and then run an ruu, just to give yourself a fresh install. then place a custom recovery onto the phone again and install your rom of choice. if its still lagging then i dont know what it could be:/
Click to expand...
Click to collapse
but doesn't RUU lock bootloader etc ?
ryanraven said:
but doesn't RUU lock bootloader etc ?
Click to expand...
Click to collapse
yea it does.as i see you are S-OFF so you do not need to flash the boot.img manually but give it a try to see if it works.if it is not then from recovery do format all partition(except sd card)and flash the rom again.best wishes
ryanraven said:
but doesn't RUU lock bootloader etc ?
Click to expand...
Click to collapse
it does, but since you are s-off you can just reflash the revolutionary/ jupuntobear hboots to have fastboot enabled ect
okay iv'e done all that installed RUU wiped everything etc install rom and installed kernel and still takes the same amount of time to start up so wiped again and left it with the kernel that came with the rom and it starts up much faster not sure why no kernel works properly with this rom. HyperSensation 3.1 CM
ryanraven said:
okay iv'e done all that installed RUU wiped everything etc install rom and installed kernel and still takes the same amount of time to start up so wiped again and left it with the kernel that came with the rom and it starts up much faster not sure why no kernel works properly with this rom. HyperSensation 3.1 CM
Click to expand...
Click to collapse
maybe its just the kernel your trying to flash doesnt like your phone ;P. which kernel is it?
heavy_metal_man said:
maybe its just the kernel your trying to flash doesnt like your phone ;P. which kernel is it?
Click to expand...
Click to collapse
ive tried a few and their all the same
XxXPachaXxX kernel aroma installer v2.53
Pyramid-ICS-XE-010b2-300-aroma
Bricked-3.0-v1.4-ics-maxkhz=1566000-minkhz=192000-maxscroff=486000 << Starts up the same time as ROM Kernel
3.0.40-TAMCORE-00689-gfe1a294
You do realize that different kernels are for either sense or aosp right?
Sent from my Sensation
blahbl4hblah said:
You do realize that different kernels are for either sense or aosp right?
Sent from my Sensation
Click to expand...
Click to collapse
yes but all of these kernels were recomended by other users to use with non sense roms
Hi,
I have currently 4.5 CleanRom, and I used TWRP to install it, but I want Jellybean on my phone, can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
thanks.
yching07 said:
Hi,
I have currently 4.5 CleanRom, and I used TWRP to install it, but I want Jellybean on my phone, can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
thanks.
Click to expand...
Click to collapse
of course you can, but if you're on a newer Hboot, you will need to boot the rom through fast boot with boot.img
but of course.
dustin4vn said:
of course you can, but if you're on a newer Hboot, you will need to boot the rom through fast boot with boot.img
but of course.
Click to expand...
Click to collapse
I already have TWRP installed and I know how to access it on fastboot, the only reason I asked why is because I have seen some rooms not working properly with CWM Recovery, so I didnt know if there was any problem the other way around with roms like Cyanogen.
Thanks!
your good to go with twrp, i recommend updating to twrp 2.3.1.0
Will the CM nightlies flash normally on the old hboot?
Sent from my Nexus 7 using xda premium
they should but if you have any problems go into bootloader and run this command "fastboot erase cache"
are you using twrp 2.3.1.0?
Bootlooping CM10 on Telstra One XL
Hey guys been trying to work this out for the last 20 hours.
Now i followed the very good guides to put TWRP on the phone that worked fine tried to load cm10 latest nightly rom on kept bootlooping. so decided to give another rom ago.
used viper and it worked fine.
wanted to try and get cm10 working
So i have twrp 2.3.1
And latest cm-10-20121102-NIGHTLY-evita.zip
i wipe system, factory default cache. and the other cache.
go and install the rom all looks good, wipe caches and reboot.. than goes to the cool cm10 logo and loops there for AGES like 30 mins than i power cycled it and tried over.
with no working cm10 there i looked around and followed a guide to fastboot a new boot.img on from out of the cm10 zip.
this looked like it was going to work but still reboot and bootlooping.
can anyone help please.
AnThraXau said:
Hey guys been trying to work this out for the last 20 hours.
Now i followed the very good guides to put TWRP on the phone that worked fine tried to load cm10 latest nightly rom on kept bootlooping. so decided to give another rom ago.
used viper and it worked fine.
wanted to try and get cm10 working
So i have twrp 2.3.1
And latest cm-10-20121102-NIGHTLY-evita.zip
i wipe system, factory default cache. and the other cache.
go and install the rom all looks good, wipe caches and reboot.. than goes to the cool cm10 logo and loops there for AGES like 30 mins than i power cycled it and tried over.
with no working cm10 there i looked around and followed a guide to fastboot a new boot.img on from out of the cm10 zip.
this looked like it was going to work but still reboot and bootlooping.
can anyone help please.
Click to expand...
Click to collapse
try this.
1.) Download the 10/27 build
2.) get the boot.img from this build
3.) wipe cach/dalvik and system
4.) install 11/2 nightly
5.) flash the 10/27 boot.img
6.) reboot
This worked for me, something with the 11/2 and 11/1 boot.img was keeping it from booting.
Good luck
yching07 said:
can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
Click to expand...
Click to collapse
I would only recommend TWRP with CM10, or any other ROM.
Problems with CMW are due to the fact that it never officially supported our device, and was just a port. TWRP has no such issues.
redpoint73 said:
I would only recommend TWRP with CM10, or any other ROM.
Problems with CMW are due to the fact that it never officially supported our device, and was just a port. TWRP has no such issues.
Click to expand...
Click to collapse
Ohh okok, great thanks, I already installed the TWRP 2.3 from goomanager, lets see if I get the courage to use cm10
yching07 said:
Ohh okok, great thanks, I already installed the TWRP 2.3 from goomanager, lets see if I get the courage to use cm10
Click to expand...
Click to collapse
You don't need courage to do that. You need patience, reading and common sense.. Good luck
Sent from my HTC One XL using xda premium
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309
impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.
You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4
Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")
My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date