Database Info

[Q] recovery

Hi Guys,
Got a bit of a problem, got a sensation xe and tonight i did the s-off and rooted then tried to put a new rom on but it just bootlooped so went to recovery and did a restore and all was ok,
rooted it again and put the PG58IMG back on did the update then it just went as far as the beats logo and looped.
i tried to get into recovery but it wouldnt go and just kept saying no image or wrong image every time i tried, i read some similar threads to this and so eventually i took out the sd card and then got back into recovery but doing a restore didnt work,
took the sd card out and using the pc deleted the PG58IMG which i thought might be causing the problem, tried recovery and it started again but on rebooting it just bootloops again, can anybody help me?

Need to know exactly what you did at the time of flashing? What steps have you done and what ROM?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium

start
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG on so i went and put what i thought was the right PG58IMG on updated it and then rebooted and it went into a bootloop.
Tried to do a recovery but would not allow it it just kept running through "no image" then "wrong image" then "no image" and so on.
Tried to get into recovery but wouldnt move down so after reading a similar thread i pulled the sim and got into recovery selected the first of the two restore options and it was restoring from cwd rebooted and it started on a bootloop again going to the beats logo this time.
Thank for your help btw.

Forgot to add it was the revolution system. Thanks for any help!

highlander1v said:
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Click to expand...
Click to collapse
To install ICS roms you need an additional step. Before installing the rom you should supercid and install the new ICS firmware. You can find the link on the second line of darkforest sensation xe ics 3.2.1.
If don't want to supercid follow the instruction here and download the firmware package for your CID (3.24, revolutionary or normal).
Install the new firmware.
Remove the PG58IMG from your sd card
Install the ICS rom.
highlander1v said:
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG
Click to expand...
Click to collapse
You don't root with PG58IMG, that's for the custom recovery. Have you installed the su-2.3.6.3-ef-signed.zip file from the guide?

Hi, yes i have the su-2.3.6.3-ef-signed.zip installed and have removed the PG58IMG from the sd card, but as i say the thing is just boot looping after the beats logo and i would like to find out the next steps to get things back to normal?

Thanks grandelama can you tell me my next move to get back to normal and out of bootloop?

What ROM do you currently have on your phone that doesn't boot? Stock or Darkforest or something else? I'm not sure what rom you restored from the backup... If you restored the Darkforest rom and didn't install the correct firmware as Grandelama said, it will get stuck in a bootloop. If you did install the firmware, try reinstalling the Darkforest rom.
Otherwise, to get your phone working, just do a full wipe in recovery and try to install any gingerbread based rom, for example Android Revolution HD 3.6.13 from here. It should install fine and get your phone to a working condition. Then you can try to get superCID and install the firmware if you want to use ICS roms.
If you have Clockworkmod working and are going to install custom roms anyway, you don't need to worry about installing the su-2.3.6.3-ef-signed.zip file, since all those custom roms are already rooted.

If you have completed without errors the points 1, 2 and 3 of the guide, and you can use Clockworkmod recovery you are now ready to install any NON ICS rom like Android Revolution HD 3.6.13.
Run the superwipe script in Android revolution HD thread, install the 3.6.13 rom and you should boot up allright
If you want to use an ICS rom your missing a step (new firmware) and you need to follow the instructions I gave you in the last post.

Ok thanks guys, i'll try that and let you know how i get on.

Dr Madman i tried the dark forest rom but it wouldnt load so went into recovery and went back to the original stock gingerbread then thinking i had put the wrong 58img changed it and updated but it just bootloaded so did a cwm restore and it still bootloads.

I'm still not sure just what to do next because i'm afraid i might make things worse.
I went into recovery then to backup and restore and then restore and this time restored the second image that was there in CWM it went thru all the recovery, asked to reboot and when i did it still keeps bootlooping.
Why is CWM not getting me back to stock?
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Dr Madman,, i could do a wipedata/factory rest wipe cache partition and install Android Revolution HD 3.6.13 because its on the sd card but to be honest i'm just to frightened to at the moment, basically i wanted to go to restore and have it back as stock but it wont! and now i'm not sure which way to go?

highlander1v said:
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Click to expand...
Click to collapse
If you did what I suggested you have installed the 3.24 firmware for ICS roms, am I right?
Can you tell which exact version did you install? Where did you download it from? The one from the Kohr-Ah thread...mike1986's version or what?
If you installed mike1986's version without Supercid first you will bootloop with both ICS and Gingerbread roms.

yes
Yes i am certain i did but not sure which one, heads all over the place with this, anyway i will check and get back to you.
Thanks.

Grandelama i think? this is the one i used......DOWNLOAD 3.24 Revolutionary: http://goo.gl/82UpA
MD5: 74e67609f67c3ad6ab94cdb89f19f2fa
Is there a way to find out for sure for you?
Thanks

Do you still have on your pc the zip package you used? If that's the case you can find the md5 of your file and with that you can know which firmware package you installed.
Maybe it's a stupid question, but can you tell me which is exactly your CID? What is the output you get with "fastboot getvar cid"? Are 100% you sure you installed exactly the firmware package for your CID?

Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again

no, not now 100 sure!
Htc driver 3.0.0.007
v4.3.233.pub.odex.zip
revolutionary -0.4pre4
su-2.3.63-efgh-
darkforest sensation xe ics 3.2.1
PG58IMG
Android revolution hd sensation 3.6.13
This is what else i have plus i have a xe backup folder on the pc if this is of any use ?

is this what you are asking for?
http://forum.xda-developers.com/attachment.php?attachmentid=874000&stc=1&d=1327610186

highlander1v said:
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
Click to expand...
Click to collapse
Hi,
i had the exact same problem and yesterday i solved it. I tried to flash the latest InsertCoin ICS ROM and failed to first install the new Firmware. When i realized this, i did it but forgot to check the CID, wich was not in the FW-zip.. so.. my phone just bootlooped, came to the splashscreen the rebooted. Your phone is not bricked.
This is what i did to solve it:
First i got Super-CID wich you can read about in this thread: [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on .. it took me about 30 sec to get Super-CID, its very easy if you just read the text.
Then i flashed the new Firmware (3.24.401.1 RUU) that you can find here [DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
After that i just flashed the ROM like before and voila, it worked.
Hope it helped some.

Stuck at "optimizing android app"

I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?

andre_07 said:
I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
Click to expand...
Click to collapse
yes flash recovery using this guide
FLASHING ROMS WITH SON
just follow step 2 from above guide if you are SOFF
if SON follow step 2 and 3

Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium

realsis said:
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?

can anyone giving me the exact path of the cwm backup?

andre_07 said:
can anyone giving me the exact path of the cwm backup?
Click to expand...
Click to collapse
andre read my previous post to flash 4EXT this doesn't require a working rom
also in normal the backups are present on SDCRAD
ie /sdcard/clockworkmod/backup
so once you format the sdcard you will lose the backups

andre_07 said:
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
Click to expand...
Click to collapse
If I read this correct you have the official stock firmware that was with the T-Mobile OTA ICS update. This means your bootloader is locked even though you are S-off. You need to flash a engineered Hboot to solve this. Go to this thread to get a firmware package with this. Go to the "User-Friendly Firmware" thread by Kohr-Ah, or you can also use the firmware from GROG88's thread here.

{HELP} device is keep booting into recovey -- SOLVED --

To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.

What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".

Its not bricked.If u can enter recovery
Sent from my HTC sensation

Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.

Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2

Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse

If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app

Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.

CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse

DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.

Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse

Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app

Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

[Q] Boot loops after flashing ANY rom

I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?

Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309

impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.

It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?

impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.

So you didn't install a custom kernal before
Sent from my KFTT using xda premium

KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.

You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4

Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.

I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!

pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone

asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002

pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")

My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date

Android Revolution HD 7.3 problem.

Hello.
I've got problem with installing ROM Android Revolution HD 7.3. I bought Sensation, it's rooted, S-OFF, bootloader is unlocked, 4EXT Recovery Touch, I've flashed Universal Firmware 3.33. I done wipe data and wipe cache, flashed ROM but after reebot it's stuck on Beats logo. Nothings happened. I also tried do full wipe by superwipe script for Sensation, but that doesn't help. It still stucks on Beats logo. I aslo tried to flash boot.img via flashboot and cmd command. I unziped ROM file, found boot.img file for kernel which I want to install (faux) and flash it via fastboot. Then install ROM via installer included into ROM. After that it doesn't work either.
Can someone help me? I manage to flash different ROM: CM11 with ION and 3.0 kernel by Sultan, but i want to try Android Revolution HD. Maybe my battery will live longer
I appreciate any help.

how long did you wait on beats audio logo? because first boot up takes time

Couple of minutes. No longer then 10, for sure. You think I should wait longer?

robkow said:
Couple of minutes. No longer then 10, for sure. You think I should wait longer?
Click to expand...
Click to collapse
nope , i think 10 min is enought..

Ok. Maybe someone else have a solution.
By the way, I see you've got a ViperS 5.1.0 ROM. Could you tell me how it's works? Especially the battery lifespan.

robkow said:
Ok. Maybe someone else have a solution.
By the way, I see you've got a ViperS 5.1.0 ROM. Could you tell me how it's works? Especially the battery lifespan.
Click to expand...
Click to collapse
For me is great , but you have to try it yourself

for ARHD 7.3 ROM if it has in aroma installer to choose a kernel try with the stock one and see if it boots
make a full wipe from recovery before flashing the rom

I've already tried every one of 3 included. But I will try do it again now and wait for longer on Beats logo.

robkow said:
I've already tried every one of 3 included. But I will try do it again now and wait for longer on Beats logo.
Click to expand...
Click to collapse
what recovery do you have?

4EXT Recovery Touch v1.0.0.5 RC5

robkow said:
4EXT Recovery Touch v1.0.0.5 RC5
Click to expand...
Click to collapse
try to update to the latest one
even redownload the rom and check md5 sums

I reinstal ROM again and it works. I don't know why, but it works. Thanks everyone for help, though