Database Info

[Q] LG Codes no longer Working

So, I did some digging and I found a list of codes for LG...
To check LG mobile or cellphones IMEI (International Mobile Equipment Identity)
On the main screen type *#06#
Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code of your LG Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your LG Phone
SP = Spare
Other secret tricks for LG mobile or cellphone
LG all models test mode:
Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*
LG-U81XX SPECIAL CODES
Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'
Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*
The only problem is, any code I try fails. I get USSD Code Running....
then I get the message MMI code Cancelled.
Anyone run into this before? This worked before I rooted and applied Pauls pre-dexopt tweek.

You may miss the sticky.
Try
2945#*999#
Izzydroolin said:
So, I did some digging and I found a list of codes for LG...
To check LG mobile or cellphones IMEI (International Mobile Equipment Identity)
On the main screen type *#06#
Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code of your LG Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your LG Phone
SP = Spare
Other secret tricks for LG mobile or cellphone
LG all models test mode:
Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*
LG-U81XX SPECIAL CODES
Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'
Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*
The only problem is, any code I try fails. I get USSD Code Running....
then I get the message MMI code Cancelled.
Anyone run into this before? This worked before I rooted and applied Pauls pre-dexopt tweek.
Click to expand...
Click to collapse

Thanks mingkee, but I'm not trying to unlock the phone, I'm just trying to get to the secret menu. Still no go.

The standard secret menu? *#*#4636#*#*

Izzydroolin said:
Thanks mingkee, but I'm not trying to unlock the phone, I'm just trying to get to the secret menu. Still no go.
Click to expand...
Click to collapse
Get "anycut" from market.

[HOW-TO][FIX] Repair your IMEI with QPST - updated w/ info

Huge thanks to Peoplearmy for providing me with the knowledge on how to do this.
This guide is intended for those who:
Lost their IMEI and did not back it up
OR
Lost their IMEI, which now reads "0" (one zero)
Operating system needed: WINDOWS
If you are running OSX or Linux you can emulate Windows by using Parallels (OSX) or Virtualbox (Linux)
Things you need:
QPST_2.7_378
Rooted stock ROM (Root66 preferred)
======================START======================​
Download QPST from the link above
Write down your IMEI (you can find it on the back of the phone behind the battery)
Turn on your phone
Open the keypad and dial *#22745927
Enable hidden menu
Go back to the keypad and dial *#7284#
Click Qualcomm USB Settings
Select RMNET + DM + MODEM and click ok
On your computer, open up Device Manager
Locate Ports (COM & LPT) and expand it
You should see the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Write down (COM10) (yours may be different, just write it down)
Open up QPST
Select Ports & Add new port...
Enter your port (mine was (COM10) so I will put "COM10" in BOTH boxes)
In QPST select Start Clients and RF NV Item Manager
In RF NV Item Manager go to Settings -> Comport
Select your port from the drop menu and press ok
Under "File" choose Read Supported NV RF Items
From the list of items navigate to number 550
You will see 9 text boxes. This is where you will put in your IMEI. It's weird how it's ordered so follow this EXACTLY. You will need to enter your IMEI from left to right, but backwards. Here's what I mean:
***Make sure the Hex box is checked***
Code:
[B]EXAMPLE:[/B] Say your IMEI is 954091051099226
The boxes would look like so:
8 (This must go in the first box)
9a (The "a" represents the fact that the last pair only consists of 1 number)
45
90
01 (this can be written as 1 as well)
15
90
29
62
Once you enter in the data, press Write NV
Reboot your phone (remember to put your phone back to MTP + ADB by dialing *#7284#)
Your IMEI is now back!
Nice work going through all that :highfive:
=============NEED HELP / HAVE QUESTIONS?=============​
I don't see "Ports (COM & LPT)" in Device Manager. Where is it?
Some of you may have trouble, even after dialing the correct numbers and that's okay. Here's what you need to do:
Open up cmd as Administrator
Type hdwwiz.exe to start the Hardware Wizard
Follow the onscreen prompts until you come to two choices
Select Install the hardware that I manually select from a list (Advanced)
Scroll down until you find Ports (COM & LPT) and select it
Add your phone's ports
Now go into Device Manager on your computer and start from instruction #10 in the first part of this guide.
Any news on fixing _______?
If there are any developments, I'd be posting about them on Twitter
I like this a lot. I want to donate to you.
Thanks for the consideration, but please donate to Peoplearmy instead. He is the main mastermind behind this.
=================FOR KNOWLEDGE=================​
If your previous phone was only capable of 3G - remember we had to dial *228 to activate it or update our PRL? Well, DO NOT dial this on a 4G phone. Constantly dialing *228 on our Galaxy S3s has the potential to fry the SIM cards rendering our phones useless. With 4G phones, the PRL is automatically pushed to the phone via the SIM card and should be given periodic updates by Verizon.

Great info. Thanks for the how to! Third (or fourth) line should be 01 btw . Hope this will ressurect some bricks!
Sent from my SCH-I535 using xda app-developers app

prenedo said:
Great info. Thanks for the how to! Third (or fourth) line should be 01 btw . Hope this will ressurect some bricks!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Oh, right. Thanks lol

This should encourage more people to try out the AOSP releases!
One note, in your IMEI example, I think you have 10 instead of 01. If I'm wrong, please delete this post.
Mods, feel free to delete once it's fixed.
Sent from my SCH-I535 using Tapatalk 2

mmalkin said:
This should encourage more people to try out the AOSP releases!
One note, in your IMEI example, I think you have 10 instead of 01. If I'm wrong, please delete this post.
Mods, feel free to delete once it's fixed.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Corrected it lol

This is great development. Will try CM10 in a week
Sent from Verizon Galaxy S 3 w/ XDA APP

It is awesome to know... I may try CM9 or CM10 later...

Just wanted to point out on the QPST download page, don't click any of the "download" buttons (there are multiple on the page). Just scroll to the middle of the page, enter the code, and click on "Qualcomm Product Support Tools (QPST) v.2.7.323"
Hitting the download buttons downloaded a "setup.exe" file. Not sure what it does but it sounds suspicious. Hope that helps and thanks PureMotive for the very thorough guide.

Thanks for your hard work, looks great..

Has anyone who lost their IMEI tried this?
Sent from my Verizon Samsung Galaxy S III with a locked bootloader - F*** YOU VERIZON

weblexa said:
Has anyone who lost their IMEI tried this?
Sent from my Verizon Samsung Galaxy S III with a locked bootloader - F*** YOU VERIZON
Click to expand...
Click to collapse
I just did it yesterday.

This should be moved to Original Development so it doesn't get lost and is truly original.
Sent from my SCH-I535 using xda premium

How to do it from cm10 http://forum.xda-developers.com/showpost.php?p=29434759&postcount=152

PureMotive said:
I just did it yesterday.
Click to expand...
Click to collapse
Awesome. I've been holding off on flashing CM10 until we found a way to fix the IMEI. Think I'll do some flashing tonight.
Sent from my Verizon Samsung Galaxy S III with a locked bootloader - F*** YOU VERIZON

PureMotive said:
Thanks to peoplearmy for providing me with the knowledge on how to do this.
This guide is intended for those who:
Lost their IMEI and did not back it up
OR
Lost their IMEI, which now reads "0" (one zero)
Operating system needed: WINDOWS
If you are running OSX or Linux you can emulate Windows by using Parallels (OSX) or Virtualbox (Linux)
Things you need:
QPST version 2.7 build 323
Rooted stock ROM
======================START======================​
Download QPST from the link above
Write down your IMEI (you can find it on the back of the phone behind the battery)
Turn on your phone
Open the keypad and dial *#22745927
Enable hidden menu
Go back to the keypad and dial *#7284#
Click Qualcomm USB Settings
Select RMNET + DM + MODEM and click "ok"
On your computer, open up Device Manager
Locate Ports (COM & LPT) and expand it
You should see the following:
Write down (COM 10) (yours may be different, just write it down)
Open up QPST
Select Ports & Add new port...
Enter your port (mine was (COM 10) so I will put "COM10" in BOTH boxes)
In QPST select Start Clients and RF NV Item Manager
In RF NV Item Manager go to Settings -> Comport
Select your port from the drop menu and press "ok"
Under "File" choose Read Supported NV RF Items
From the list of items navigate to number 550
You will see 9 text boxes. This is where you will put in your IMEI. It's weird how it's ordered so follow this EXACTLY. You will need to enter your IMEI from left to right, but backwards. Here's what I mean:
***Make sure the Hex box is checked***
EXAMPLE: Say your IMEI is 954091051099226
the boxes would look like so:
8 (This must go in the first box)
9a (I believe the "a" represents the fact that the last pair only consists of 1 number)
45
90
01 (this can be written as 1 as well)
15
90
29
62
Once you enter in the data, press "Write NV"
Reboot your phone
Congrats, your IMEI is back!
Click to expand...
Click to collapse
Frigging AWESOME! GREAT work all!
Sent from a galaxy far, far away....

Can anyone go to Settings -> Status and locate their MEID and tell me how many digits it is? Also, please let me know if you only see numbers or if there are letters as well. I believe a corrupt MEID (Dec & Hex) is the cause of errors such as persistent roaming and I would like to try to find a fix.

my MEID is 14 digits long. IMEI is 15 digits. both correct. on cm10.

PureMotive said:
Can anyone go to Settings -> Status and locate their MEID and tell me how many digits it is? Also, please let me know if you only see numbers or if there are letters as well. I believe a corrupt MEID (Dec & Hex) is the cause of errors such as persistent roaming and I would like to try to find a fix.
Click to expand...
Click to collapse
MEID DEC = all numbers. 18 total
MEID HEX = numbers and letters. 1 letter (x) and 15 numbers. The letter is the 2nd thing listed followed by 14 numbers. For example, 0x13234123412341

larry_walker said:
my MEID is 14 digits long. IMEI is 15 digits. both correct. on cm10.
Click to expand...
Click to collapse
Thank you. Do you have numbers and letters in your MEID or is it just one or the other? Also, is it a single string of numbers?
I forgot to ask, but if anyone is thinking of switching ROMs soon, can you compare the MEID on your first ROM with the MEID on the second ROM? Tell me if they are the same or different. This will greatly help development. Thanks!

PureMotive said:
Thank you. Do you have numbers and letters in your MEID or is it just one or the other? Also, is it a single string of numbers?
I forgot to ask, but if anyone is thinking of switching ROMs soon, can you compare the MEID on your first ROM with the MEID on the second ROM? Tell me if they are the same or different. This will greatly help development. Thanks!
Click to expand...
Click to collapse
Is my MEID corrupted since i have a dec and hex?

[Q] F350 possible enable Edge Network ???

Guys , i'm so happy with this Great F350K and i think is the Best device now on the market.
But here in Europe there's no way to enable edge network on this device ( same thing was using G2 F320K or S ).
The Service Menu is not useful to enable edge network too , Damn.
Do you know if exists a valid method to do this ? Maybe try to modify Modem.img ?
Sent from my LG-F350K using XDA Premium 4 mobile app

wolfgart said:
Guys , i'm so happy with this Great F350K and i think is the Best device now on the market.
But here in Europe there's no way to enable edge network on this device ( same thing was using G2 F320K or S ).
The Service Menu is not useful to enable edge network too , Damn.
Do you know if exists a valid method to do this ? Maybe try to modify Modem.img ?
Sent from my LG-F350K using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=658990&extra=page=1
please move this thread to Q&A

hkfriends said:
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=658990&extra=page=1
please move this thread to Q&A
Click to expand...
Click to collapse
Bro, hard chinese language here. Need someone here try on his F350 and make an english guide

wolfgart said:
Bro, hard chinese language here. Need someone here try on his F350 and make an english guide
Click to expand...
Click to collapse
Not really sure what to do on this. Hope someone can post here. Thanks

buenarc said:
Not really sure what to do on this. Hope someone can post here. Thanks
Click to expand...
Click to collapse
can someone using G2 (F320 variant) try this guide. or AT&T variant. The goal is enable or disable a type of network

any ideas ?

is seems my phone is not viewed from QPST https://www.dropbox.com/s/8xt3yho3g16in4r/2014-05-08 09_37_43-Program Manager.png
I'm only able to see lg serial port (in device manager) if phone started in download mode. No way to have serial port on OS booted

wolfgart said:
is seems my phone is not viewed from QPST https://www.dropbox.com/s/8xt3yho3g16in4r/2014-05-08 09_37_43-Program Manager.png
I'm only able to see lg serial port (in device manager) if phone started in download mode. No way to have serial port on OS booted
Click to expand...
Click to collapse
Basically it is a tool for communcate with QUALCOMM device (so it is not limited to LG, Samsung....etc)
It has some variables coded in the modem storage, so we have to change these value and enable EDGE for example...
PS: make sure dail: 3845#*350#
hidden menu
Port Setting -> Diag Setting => USB Set for Diag
1) you need to install QPST v2.7.374 which support 4G
https://mydownloadsection.googlecode.com/files/QPST.2.7.374.rar
2) you need QUALCOMM QXDM 3.09.19
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=658994
then, just extract it and run ./bin/QXDM.exe
3) install LG drivers
4) when plug in usb, select LG software mode
5) change the LG driver to com41
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6) run QXDM
7) right click (windows notification bar "earth icon"), select Qpst Configuration
8) add new port (you should see com41 port there) and enable it
9) go back to QXDM, select Options -> communication ports
10) select com41 port
all done, just edit the value and write as below for Edge
It looks like ID 0508 = EDGE Feature Support, by default is 0 (false=disable)
ID Value
00911 0x0c
00947 0x0c
02508 1
02509 1
02510 0x01
02511 0x02
02512 0x01 ​
PS: not all modem can allow to write new value... I tried , it can write but not saved... so failed at the end

hkfriends said:
Basically it is a tool for communcate with QUALCOMM device (so it is not limited to LG, Samsung....etc)
It has some variables coded in the modem storage, so we have to change these value and enable EDGE for example...
PS: make sure dail: 3845#*350#
hidden menu
Port Setting -> Diag Setting => USB Set for Diag
1) you need to install QPST v2.7.374 which support 4G
https://mydownloadsection.googlecode.com/files/QPST.2.7.374.rar
2) you need QUALCOMM QXDM 3.09.19
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=658994
then, just extract it and run ./bin/QXDM.exe
3) install LG drivers
4) when plug in usb, select LG software mode
5) change the LG driver to com41
6) run QXDM
7) right click (windows notification bar "earth icon"), select Qpst Configuration
8) add new port (you should see com41 port there) and enable it
9) go back to QXDM, select Options -> communication ports
10) select com41 port
all done, just edit the value and write as below for Edge
It looks like ID 0508 = EDGE Feature Support, by default is 0 (false=disable)
ID Value
00911 0x0c
00947 0x0c
02508 1
02509 1
02510 0x01
02511 0x02
02512 0x01 ​
PS: not all modem can allow to write new value... I tried , it can write but not saved... so failed at the end
Click to expand...
Click to collapse
hey man, thank you, your guide is simply gorgeous . Great !
I've tried too and the same, i can write value but baseband is not written and don't allow to save
Do you think this is a QPST release limitation for this modem or there are some modem write protection ?

wolfgart said:
is seems my phone is not viewed from QPST https://www.dropbox.com/s/8xt3yho3g16in4r/2014-05-08 09_37_43-Program Manager.png
I'm only able to see lg serial port (in device manager) if phone started in download mode. No way to have serial port on OS booted
Click to expand...
Click to collapse
wolfgart said:
hey man, thank you, your guide is simply gorgeous . Great !
I've tried too and the same, i can write value but baseband is not written and don't allow to save
Do you think this is a QPST release limitation for this modem or there are some modem write protection ?
Click to expand...
Click to collapse
No idea, it should work in previous model...

hkfriends said:
No idea, it should work in previous model...
Click to expand...
Click to collapse
Oh damn Maybe we should find another QPST sw version or try to edit modem.img to make it writeble ?

wolfgart said:
Oh damn Maybe we should find another QPST sw version or try to edit modem.img to make it writeble ?
Click to expand...
Click to collapse
I think it is due to baseband, I tried different newer version on QPST / QXDM is not ok

hkfriends said:
I think it is due to baseband, I tried different newer version on QPST / QXDM is not ok
Click to expand...
Click to collapse
ok, so sure, need a method to make writable this damn of baseband

wolfgart said:
Oh damn Maybe we should find another QPST sw version or try to edit modem.img to make it writeble ?
Click to expand...
Click to collapse
wolfgart said:
ok, so sure, need a method to make writable this damn of baseband
Click to expand...
Click to collapse
find another modem.img and test.... my understanding it is baseband locked

hkfriends said:
find another modem.img and test.... my understanding it is baseband locked
Click to expand...
Click to collapse
sure ! We can try using D837 or D838 modem.img and merge needed files to original korean modem.img ?

wolfgart said:
sure ! We can try using D837 or D838 modem.img and merge needed files to original korean modem.img ?
Click to expand...
Click to collapse
i will try d838 modem tonight, currently f350 is not allowed.

hkfriends said:
i will try d838 modem tonight, currently f350 is not allowed.
Click to expand...
Click to collapse
Ok bro.
from my F350K

Finally, as I said before, Kr baseband is not supported for EDGE, so I use D838 (HK version) and it is working perfectly with QXDM...
Once wirte the value, you can read it back correctly.
I am following this site to tweak the EDGE values
http://www.lgbbs.com/thread-6482-1-1.html
00911 GPRS Multi Slot Class 0x0C Org: 0x00
00947 GPRS Enable Anite GCF 51.00 0x00
01030 Force UE SGSNR GSM R99 Version 0x02 Org: 0x00
01031 Force UE MSCR GSM R99 Version 0x02 Org: 0x00
02508 EDGE Feature Support 0X0001 Org: 0x000
02509 EDGE Multislot Class 0
02510 EDGE 8PSK Power Class 0x00
02511 EDGE 8PSK Power Capability 0x02 Org: 0x00
02512 GERAN Feature Pack 1 0x02 Org: 0x00
03628 DTM Features Support 0
03629 DTM Multislot Class 0
03630 EDA Features Support 1
04116 Internet NACC Support 0x02 Org: 0x00
04117 DARP Feature Support 0x02 Org: 0x00
HK D838 v1.0a modem.img
https://drive.google.com/file/d/0BzU7nKKydeClLUxjN2dORnpUcXc/edit?usp=sharing

Hi, first of all thanks goes to "hkfriends" for this usefull guide, i hv tried this on my korean G2 F320L, same thing happend, was able to edit values but couldn't save them, can someone please guide me how can I enable EDGE for my F320L??

hkfriends said:
No idea, it should work in previous model...
Click to expand...
Click to collapse
I ma getting greyed out options... whats wrong?
check pictures..
Sent from LG G Flex F340K

Samsung Pass NOT working on fully stock S7 (G930L) never rooted

Hi guys,
I have tried everything to get Samsung Pass to work, to no avail. Please find the relevant info. below and let me know if anyone knows the solution.
My phone:
G930L (STOCK, NEVER rooted, NEVER installed custom recovery, KNOX is UN-TRIGGERED)
Nougat 7.0 latest update
Symptoms:
When I go to Samsung Pass option in settings, there's a page that describes what Samsung Pass is, that you can "SKIP". After I skip (or after flipping through the pages), I have to enter in my Samsung Account details (ID and password).
--> After I input my password and press "CONFIRM", the small "Processing" window opens up, and stays in that loop forever.
Things I've tried:
1. Deleting my account, both from the phone and from the internet site
2. Factory reset
3. Re-install factory Firmware
4. Changed my password and re-logged in
Samsung Pay works perfectly, and I have no trouble signing into the Samsung account from both my phone and from Chrome browser on my PC. The phone is not one of those stolen/lost phones, and is registered under my name.
I cannot for the life of me figure out how to fix this issue, so any help would be greatly appreciated.
TIA,
John

Same issue here, haven't been able to find a solution so far. Samsung Pass was working flawlessly in the Beta Firmwares though.

user91 said:
Same issue here, haven't been able to find a solution so far. Samsung Pass was working flawlessly in the Beta Firmwares though.
Click to expand...
Click to collapse
+1
Could we sent an email to Samsung? See if it's a server problem
(Like it was for Samsung Cloud in beta 4)

Got a response from Samsung:
Dear Customer,
Thank you for contacting us. We appreciate the opportunity to assist you.
I understand from your inquiry that you are having difficulties setting up the S Pass service on your device.
In this case I would advise you to perform a reset of the Samsung Pass service, as this should solve any store related issues.
First, please make sure that you are signed in with your Samsung account on your device, by going to Settings > Accounts > Add account > Samsung account > Sign-in.
After that, please go to Settings > Application manager > Tap on "More" in the top right corner > Show system apps > from the provided list search for Samsung Pass > then "Force stop" the app and and after that from the "Storage" section in the same screen of the app perform a Clear cache and Clear data operations.
Then power off your device and then back on.
After that go to the Samsung Pass section in settings and try to set up the service again.
If the issue persists, please contact us back with a detailed description of the situation that you encounter and a screenshot with the situation and we will further investigate the issue.
Also, please send us the logfiles from the device, in case our developers need to investigate if there are some software issues.
To capture the logfiles, please follow the bellow steps:
1. Go to Dial screen
2. Press *#9900#
3. Select "Delete dumpstate/logcat"
4. Use the two devices and reproduce the issue (in this case, have an e-mail, text message or phone call made to your device, until the notification should appear on the Gear)
5. Select "Run dumpstate/logcat"
6. Select "Copy to sdcard(include CP Ramdump)"
7. connect the mobile to USB in PC
8. using explorer, go to "/sdcard/log" folder
9. zip the all files and send it.

user91 said:
Got a response from Samsung:
Dear Customer,
Thank you for contacting us. We appreciate the opportunity to assist you.
I understand from your inquiry that you are having difficulties setting up the S Pass service on your device.
In this case I would advise you to perform a reset of the Samsung Pass service, as this should solve any store related issues.
First, please make sure that you are signed in with your Samsung account on your device, by going to Settings > Accounts > Add account > Samsung account > Sign-in.
After that, please go to Settings > Application manager > Tap on "More" in the top right corner > Show system apps > from the provided list search for Samsung Pass > then "Force stop" the app and and after that from the "Storage" section in the same screen of the app perform a Clear cache and Clear data operations.
Then power off your device and then back on.
After that go to the Samsung Pass section in settings and try to set up the service again.
If the issue persists, please contact us back with a detailed description of the situation that you encounter and a screenshot with the situation and we will further investigate the issue.
Also, please send us the logfiles from the device, in case our developers need to investigate if there are some software issues.
To capture the logfiles, please follow the bellow steps:
1. Go to Dial screen
2. Press *#9900#
3. Select "Delete dumpstate/logcat"
4. Use the two devices and reproduce the issue (in this case, have an e-mail, text message or phone call made to your device, until the notification should appear on the Gear)
5. Select "Run dumpstate/logcat"
6. Select "Copy to sdcard(include CP Ramdump)"
7. connect the mobile to USB in PC
8. using explorer, go to "/sdcard/log" folder
9. zip the all files and send it.
Click to expand...
Click to collapse
I am still waiting for a response. Are you gonna send the logfile? Because their solution has been tried a thousand times without any change.

I managed to get this working by manually updating Samsung Account (to 2.2.03-8) via an APK from sammobile.com, and restarting. Took about three attempts, but was then successful!

I found a new version of Samsung Pass..You could try it!
http://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pass/

minervino96 said:
I found a new version of Samsung Pass..You could try it!
http://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pass/
Click to expand...
Click to collapse
Oh my god thank you so much that worked the first time! You sir are a life saver!
Sent from my SM-G930L using XDA-Developers Legacy app

ca12bon said:
Oh my god thank you so much that worked the first time! You sir are a life saver!
Click to expand...
Click to collapse
Well I am happy I have helped. Still mine isn't working. Now it says 'Samsung Pass is temporarily not available. Try again later'.
Can you please tell me in which country and which CSC you are on? Thank you

sure Im in Korea. As for CSC Im not really sure but hopefully the info can be found in my screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G930L using XDA-Developers Legacy app

ca12bon said:
sure Im in Korea. As for CSC Im not really sure but hopefully the info can be found in my screenshot
Click to expand...
Click to collapse
Actually it's a little hard to find it in there..the app phone info shows the active csc on the phone.
Nevertheless it's weird that is saying unavailable.

minervino96 said:
Actually it's a little hard to find it in there..the app phone info shows the active csc on the phone.
Nevertheless it's weird that is saying unavailable.
Click to expand...
Click to collapse
Okay, got the Samsung Phone Info app installed, and it says the following:
Firmware's CSC Code:
LUC
Active CSC Code:
LUC
CSC Country:
KOREA / KR
Bootloader Version: G930LKLU1DQA9
PDA Version: G930LKLU1DQA9
CSC Version: G930LLUC1DQA9
Baseband Version: G930LKLU1DPLP
Latest Firmware: Yes
Kernel Version: 3.18.14-10273110
[email protected] #1
64-bit
Android Version: 7.0
Build Number: NRD90M.G930LKLU1DQA9

ca12bon said:
Okay, got the Samsung Phone Info app installed, and it says the following:
Firmware's CSC Code:
LUC
Active CSC Code:
LUC
CSC Country:
KOREA / KR
Bootloader Version: G930LKLU1DQA9
PDA Version: G930LKLU1DQA9
CSC Version: G930LLUC1DQA9
Baseband Version: G930LKLU1DPLP
Latest Firmware: Yes
Kernel Version: 3.18.14-10273110
[email protected] #1
64-bit
Android Version: 7.0
Build Number: NRD90M.G930LKLU1DQA9
Click to expand...
Click to collapse
Thank you for the trouble ..Now i am gonna try and figure it out why isn't working on BTU.

Hello I have this problem with Smart Pass. I have S7 Edge Brand Vodafone I try with BTU and H3G Italy firmware but it say always: Samsung Pass is temporarily not available...

For anyone still having problems with Samsung Pass, I tried the steps Samsung provided, I tried installing from the APK, I had Samsung Tech Support on the phone for 2 hours and also went to a Samsung Experience store. Nothing worked.
Then...I deleted my Samsung Account from my phone, went directly to Samsung Pass via settings, and had to log into my Samsung Account through Pass and voila, Pass now works. Try this first before or even after a factory reset. My S8+ was basically factory reset when I had this issue as I got the phone 4 days ago. Hope this helps

still stuck
AcerRacer said:
For anyone still having problems with Samsung Pass, I tried the steps Samsung provided, I tried installing from the APK, I had Samsung Tech Support on the phone for 2 hours and also went to a Samsung Experience store. Nothing worked.
Then...I deleted my Samsung Account from my phone, went directly to Samsung Pass via settings, and had to log into my Samsung Account through Pass and voila, Pass now works. Try this first before or even after a factory reset. My S8+ was basically factory reset when I had this issue as I got the phone 4 days ago. Hope this helps
Click to expand...
Click to collapse
tried that worked for a second moment my account connected said same error that phone is rooted so it may be my back of edge

How To Guide How to Enable All Bands Through Service Menu on US/CA S22 series (including Sub-6 and mmWave)

What is this?
This is a guide on how to enable all LTE and 5G bands on the US or Canadian S22 series phones by going through the service menu. This guide is mostly based on this S20U guide by mellojosh, but has been adapted for the S22U phone with more information added.
Which bands can be enabled this way?
All bands the phone supports in hardware can be enabled through the service menu. For the S22 Ultra, that includes all Sub-6 bands like n78, and mmWave bands, as well as 5G SA bands, as shown in this screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which phones does this method support?
This method has been confirmed to work on:
Samsung S22 Ultra (S908U, S908U1, S908W).
Galaxy Z Fold 4. Thanks @Abaddon.
This method works on both Android 12 (One UI 4.1) or Android 13 (One UI 5.0 beta).
This method requires your device be on the US firmware (XAA or other US CSC), so as long as you can Odin flash XAA firmware on your device (such as Canadian variant), you should be able to do this.
If you get this method working on your phone that isn't in the known list, post it here and I will add it to the list above.
How To Guide
You will need a Windows computer (or VM) and the Samsung USB Driver installed to do the following steps. Install the USB driver from here before proceeding if you do not have it installed.
A. Flash US Firmware
First, your device must be on US firmware (XAA or other CSC). You can skip this step and go to B if your device is already on US firmware.
If you're not on a US firmware because you have another Snapdragon variant (like Canadian), follow the steps below to flash XAA firmware. Note this will WIPE and FACTORY RESET your device. ALL DATA WILL BE LOST. So backup if you need to.
Download Odin 3.14.4 or latest version.
Download US XAA U1 firmware for your device from SamMobile.com or SamFw.com. For example, for the S22 Ultra, download the XAA firmware for S908U1. Extract the contents of the firmware to somewhere on your computer. You should have 5 files (BL, AP, CP, CSC, HOME_CSC). We won't use HOME_CSC.
Restart your phone and go into download mode. On the S22 Ultra, hold all three power and up + down volume at the same time until the phone starts, then press the up volume key to get into download mode.
Open Odin and connect your phone to your computer with a USB. Odin should say your phone was added.
Click each of the BL, AP, CP, CSC buttons and select the corresponding files from the firmware zip you extracted. For CSC, use the file that starts with CSC and not HOME_CSC (we won't be using HOME_CSC). Do not load anything into USERDATA.
Click start and let it flash the firmware (see the picture below). If it flashed correctly, your phone will be on XAA firmware after it restarts and you will have to set it up again from scratch.
Set up your phone and verify it is on XAA firmware by going to Settings -> About Phone -> Software information -> check that it says XAA/XAA,XAA/OOO under "Software provider software version". OOO here will be your phone's original CSC like XAC which you cannot change and do not need to.
B. Unlock Service Menu Secret Codes
The next step is we need to unlock access to the service menu. Usually this is locked by default, but it might already be unlocked for you.
First check if you can access the service menu by trying each of these ways:
Open dialer and enter *#27663368378# to try to get directly into the service mode main menu. The menu should open after you press the last # character, you shouldn't have to press call.
Open dialer and enter *#73# to get into RF Test mode. Press Band Selection. Press three dots on top right -> Back. Repeat three dots -> back three more times until you get to the service mode main menu.
If either of the above ways works for you to get to the service mode main menu, then you can skip the below steps to unlock the menu and go directly to instructions C.
If you cannot access the menu with the above codes, then follow these instructions to unlock the secret codes.
Enable USB Debugging in Developer menu.
Download SamFW FRP tool 3.1 or latest version from here.
Open SamFW FRP tool and connect your phone to the computer with a USB.
Using SamFW FRP tool, go to MTP tab and click on "Enable Secret Code for Verizon". See the picture below. Note it works on any US CSC even though it says "for Verizon".
If in the program output you see it's getting stuck on "Waiting for DIAG", then dial *#0808# on your phone to open USB settings and select "DM + MODEM + ADB" then press OK. The program should then complete the step and then get stuck on "Disabling DIAG". When it does, using the *#0808# menu again, select "MTP + ADB" this time and press OK. Now the program should complete the step and say that secret codes was unlocked.
Now you should be able to use *#73# for RF test, *#27663368378#* to go directly to service menu. Test it to make sure the codes work and the service menu is opening.
C. METHOD 1: Use the Service Menu to Unlock All Bands
Enter the service menu using either way.
Open dialer and enter *#27663368378# to get directly into the service mode main menu.
Open dialer and enter *#73# to get into RF Test mode. Press Band Selection. Press three dots on top right -> Back. Repeat three dots -> back three more times until you get to the service mode main menu.
Use the service mode to set the following options. Note you can go back between screens with three dots -> back for quicker navigation, but I am just starting each option below from the main menu so it's easy to read.
Enable all LTE and 5G bands.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> SYSTEM -> Next page 4 times -> SET LTE BAND CONFIG -> SET DEFAULT LTE BAND.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> NR5G PRUNE STATUS -> REMOVE NR5G PRUNE.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> GCF -> REMOVE ONLY NR WHITELIST.
Optional if you need to enable mmWave bands: Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> Sub6/mmWave -> ALL ENABLE.
Optional if you have issues going from LTE to LTE+ (carrier aggregation not working properly): Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> AS -> Next Page -> DISABLE CA COMBO CHECK -> DISABLE ON.
Enable 5G NR features (DSS & CDRX) if needed. These options might already be enabled for you by default.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> AS -> Next Page -> NR CDRX CONTROL -> NR CDRX ENABLE. NR CDRX is 5G power saving mode.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> AS -> Next Page 2 times -> NR DSS CONTROL -> NR DSS ENABLE. NR DSS is 5G Dynamic Spectrum Sharing.
Enable 5G SA if you're lucky enough to have a carrier with standalone 5G networks. This option might be enabled by default already.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> NR5G SA/NSA Mode Control -> SA/NSA ENABLE.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> NR5G SA/NSA Mode Control -> Remove SA permit list.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> Next Page -> NR5G NRDC -> NRDC ENABLE. NRDC is for dual connectivity with Sub6 + mmWave bands in parallel. Only applies to 5G SA networks and only if your carrier uses it.
Restart your phone, then dial *#73# to get into RF Test Mode. Click Band Selection -> Sim 1 or Sim 2 (whichever you use). On this screen if you scroll down, you'll see a list of enabled NR5G bands. Make sure all bands are enabled. See my picture below.
NOTE: Band selection won't be reset with a reboot, but might be reset after a CSC update (or a software update that includes a CSC update). You will have to re-do the service menu settings every update or re-flash of a CSC.
NOTE: If you use an eSIM or a dual-SIM phone with a 2nd SIM, you need to change the NR5G stack before changing the NR5G related options above. Change the NR5G stack to Stack 2 with the following setting first.
Service Mode Main Menu -> UE SETTING & INFO -> SETTING -> PROTOCOL -> NR5G -> NR5G STACK SELECTION -> Select STACK 2.
OPTIONAL: Now that all bands are enabled and usable, you can use the Band Selection menu under *#73# to selectively disable certain bands if you need to. This is not covered here but that menu is self-explanatory.
If this method isn't working, try METHOD 2 below. You do not need to try METHOD 2 if this method ended up working for you.
D. METHOD 2: Unlock all bands via Protocol Simulation menu.
If METHOD 1 above didn't work or not all bands were unlocked, you can try to unlock all bands by simulating a change in your CSC to GCF (Global Certification Forum). This won't actually change your CSC to GCF, but will change the options in the service menu as if you were on GCF CSC, which should give you access to all SA and NSA bands. Credits to @wr3cckl3ss1 for figuring out this method.
To do this method, first enter the service mode main menu using either of the following ways.
Open dialer and enter *#27663368378# to get directly into the service mode main menu.
Open dialer and enter *#73# to get into RF Test mode. Press Band Selection. Press three dots on top right -> Back. Repeat three dots -> back three more times until you get to the service mode main menu.
Using the service menu, change the following options
Go to: Service Mode Main Menu -> PROTOCOL STATE -> PROTOCOL SIMULATION -> IMEI PRE CFG SIMULATION.
In this menu, click [1] AP, then click GCF (last option). Then click [2] NET1 and change it to GCF as well. Do the same for [3] NET2. All GCF.
Press [4] Write. Then restart phone.
Check if all SA bands were unlocked. If not, repeat the band unlocking instructions from METHOD 1 above and then restart the phone and check again.
Enjoy your unlocked LTE and 5G bands!
FYI, I have personally tested this on a Canadian S908W on XAA firmware to enable 5G in Canada. In fact, I was even able to update to One UI 5.0 using the adb sideload method since I was on XAA firmware, and then I repeated the steps above to enable all 5G bands on the beta (service menu was still unlocked). So now I have 5G on One UI 5.0 beta in Canada! The trifecta!
CREDITS
@mellojosh for his guide on service menu band options on the S20U1.
@wr3cckl3ss1 for his guide on selecting bands from the dialer for the S22 series phones, and for instructions on protocol simulation.
@bigdave79 for reminding me about needing the Samsung USB Driver for this to work.

Excellent job sir.

i'm on android 13 beta2 on unlocked s22 ultra.
after i click on "DM + MODEM + ADB" then ok,
it' still stuck at Waiting for DIAG....

Great effort man, Thank you.
but this will not work on variants like S908N Korea or the S9080 China correct ?

netnerd said:
i'm on android 13 beta2 on unlocked s22 ultra.
after i click on "DM + MODEM + ADB" then ok,
it' still stuck at Waiting for DIAG....
Click to expand...
Click to collapse
Which CSC are you using and which model (S908U1)?
When I tested this, I unlocked the secret codes first on Android 12, then upgraded to Android 13 and secret codes still worked. I'm not sure if you can unlock it directly on Android 13.
Are you willing to downgrade to Android 12 first to try?

Mem_0 said:
Great effort man, Thank you.
but this will not work on variants like S908N Korea or the S9080 China correct ?
Click to expand...
Click to collapse
Can you flash US firmware on the Korean and Chinese variants with Odin (normal or patched)? If you can get on US firmware, then it might work. I do not think it will work on other firmwares.

peacey8 said:
Can you flash US firmware on the Korean and Chinese variants with Odin (normal or patched)? If you can get on US firmware, then it might work. I do not think it will work on other firmwares.
Click to expand...
Click to collapse
I don't think that's possible as the pit files are different.

peacey8 said:
Can you flash US firmware on the Korean and Chinese variants with Odin (normal or patched)? If you can get on US firmware, then it might work. I do not think it will work on other firmwares.
Click to expand...
Click to collapse
till now there is no way to flash US on a Korean

Mem_0 said:
till now there is no way to flash US on a Korean
Click to expand...
Click to collapse
peacey8 said:
Can you flash US firmware on the Korean and Chinese variants with Odin (normal or patched)? If you can get on US firmware, then it might work. I do not think it will work on other firmwares.
Click to expand...
Click to collapse
The only Snapdragon variant that has the same pit file as S908U/S908U1....is the S908N. But to no avail. It fails.

wr3cckl3ss1 said:
The only Snapdragon variant that has the same pit file as S908U/S908U1....is the S908N. But to no avail. It fails.
Click to expand...
Click to collapse
why does it fail ? bec of different pit files ?

The pit files are what partition the device. And....
S908U/S908U1/S908N have B0Q_USA_SINGLEW
S908E - B0Q_GBL_OPEXX
S908W- B0Q_CAN_SINGLEX
And even if you were to get it to flash. That still won't unlock the bootloader. Just an FYI.

I have made a lot of research and failure tries trying to change the CSC of the S908N I have from KTC to KOO, but every time it fails using Samkey or even Samfw, after further looking they said that Samsung had blocked the Korean variants starting from S21 I guess.
wr3cckl3ss1 said:
The pit files are what partition the device. And....
S908U/S908U1/S908N have B0Q_USA_SINGLEW
S908E - B0Q_GBL_OPEXX
S908W- B0Q_CAN_SINGLEX
And even if you were to get it to flash. That still won't unlock the bootloader. Just an FYI.
Click to expand...
Click to collapse
I don't want to unlock the bootloader at the moment, I just want to change csc at first to KOO instead of KTC and after that maybe install international software.

peacey8 said:
Which CSC are you using and which model (S908U1)?
When I tested this, I unlocked the secret codes first on Android 12, then upgraded to Android 13 and secret codes still worked. I'm not sure if you can unlock it directly on Android 13.
Are you willing to downgrade to Android 12 first to try?
Click to expand...
Click to collapse
yes, I'm on s908U1 with FKR/FKR, TMB/XAA (Visible wireless on sim, tmobile on esim).
if i downgrade to Android 12, will it wipe my data? i really don't wanna wipe my phone

netnerd said:
yes, I'm on s908U1 with FKR/FKR, TMB/XAA (Visible wireless on sim, tmobile on esim).
if i downgrade to Android 12, will it wipe my data? i really don't wanna wipe my phone
Click to expand...
Click to collapse
Yes it might wipe your phone, I'm not sure. I wouldn't risk it without backing up first.
I haven't tested this on FKR. So if it doesn't work for you on Android 12, use SamFW FRP Tool to change your CSC to XAA when you're on Android 12. Then it should definitely work.

Thanks for this.
Question: if I'm on att or TMOB, does this unlock more useable bands for me?

netnerd said:
i'm on android 13 beta2 on unlocked s22 ultra.
after i click on "DM + MODEM + ADB" then ok,
it' still stuck at Waiting for DIAG....
Click to expand...
Click to collapse
I'm having the same issue and I'm on Android 12.
EDIT: I'm an idiot. I did not have the Samsung Android USB drivers installed. Tried it again and now it works!

ekerbuddyeker said:
Thanks for this.
Question: if I'm on att or TMOB, does this unlock more useable bands for me?
Click to expand...
Click to collapse
The phone already comes with all almost all the bands already. This guide just shows you how to enable them all.

Has anyone had any luck, I followed all the step to the T, but it still stuck on "waiting for DIA".

Running androind 12 / SM-S908U1
canada S22U

formula666 said:
Has anyone had any luck, I followed all the step to the T, but it still stuck on "waiting for DIA".
Click to expand...
Click to collapse
Install Samsung Android USB drivers from here.