Database Info

Step by Step: How to partition ext2 with Paragon Partition Manager 9.0 - windows vers

HOW TO PARTION WITH PARAGON PARTITION MANAGER
**** YOU WILL LOSE ANY INFO ON THE SDCARD - PLEASE BACK UP IMPORTANT INFO PRIOR TO STARTING THIS PROCESS ***
**** these are instructions for Windows XP ***
***** if you are using Windows Vista - You need to change the permissions to Administrative in order for this to work - RIGHT CLICK ON THE START BUTTON AND GO TO ADMIN SETTINGS - even if you are the only user of the PC
have the sdcard in the card reader or in the phone mounted to the pc !!!!
OPEN PARTITION MANAGER...
CLICK ON PARTITION MANAGER IN THE LOWER RIGHT HAND CORNER..
then click on the line that represents the sdcard, and right click on it, and choose format partition.. name the volume label - fat32
then click format..
computer might hang for a minute or 2, and then a popup will come up and say click GREEN CHECK to apply changes..
click the GREEN CHECK IN THE TOOLBAR AREA..
you will then see another pop up show - apply changes, choose yes, then you will see OVERALL PROGRESS AND GEARS TURNING.. LET IT PROCESS AND TAKE ITS TIME.. DONT HIT CANCEL..
when its done the cancel button at the bottom will change to Close.. click it..
AND THE FIRST STAGE IS DONE...
NOW ITS TIME TO CREATE THE EXT2 PARTITION..
Now on the Left side of the screen click Create partition.. and a screen will now show Create New Partition Wizard... it lets you chose which drive to partition ( make sure you chose the sdcard - it will be the one with the smallest volume/size of the sdcard in gbs.. should be on the bottom )...
HIT NEXT
now a slider will appear where it says new volume....
move the slider with the mouse, and make it how big you want it.. for ext2 partiiton about 500mb to 1gb is plenty... 500mb is good size.. ( size wont be exact so get it close to the size you want..
WHEN DONE CLICK NEXT...
NOW IT GIVES YOU THE OPTION TO FORMAT THE PARTITION...
CLICK THE PARTITION TYPE DROPDOWN MENU AND CHOSE LINUX EXT2... AND GIVE IT A VOLUME LABEL OF ext2.
then click next...
PC WILL PROCESS AND HOURGLASS WILL SHOW WHERE THE MOUSE POINTER IS.. AND THEN A POP UP WILL SHOW - SAYING -
COMPLETING THE CREATE NEW PARTTITION WIZARD..
CLICK FINISH...
THEN IT TAKES YOU BACK TO THE SCREEN SHOWING THE DRIVES, AND WHAT YOU CREATED, AND THE OPTION AT THE TOP WILL SAY - APPLY ... choose apply
THEN IT WILL ASK YOU TO - APPLY PENDING CHANGES AGAIN, choose yes..
NOW YOU WILL SEE THE GEARS WORKING AGAIN.. LET IT RUN TILL IT SAYS complete..
*it will take a few minutes to process.. let it run...
you might get a pop up for the sdcard drive as a open folder on the pc just showing that its done, just go back to paragon and let it finish running...
once complete you will get a pop up saying SYSTEM RESTART IS REQUIRED TO COMPLETE OPERATION.. CHOSE RESTART THE COMPUTER...
You will see a paragon manager screen, that will hang for a almost a minute, and then the bar will fill saying 100 percent complete, press any key to reboot the pc..
AS LONG AS THERE IS NO ERRORS, YOUR DONE..
FORMAT COMPLETE..
PARAGON WILL START UP ON ITS OWN, AND SHOW THE PARTITIONS AS BEING COMPLETE..
----
*****edit
Originally Posted by Androidandy
check that the ext2 partition is good by typing busybox df -h in terminal.
************************************************************EDIT *****************
If your having issues using paragon partition manager, and trying to make a linux swap partition, try these instructions for formating thru Cyanogens newest recovery
Formatting you SDcard
You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2
You need Recovery image 1.31 to do this folks!
To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!
You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted
Example for 8GB card (specific value's may be slightly different use print to verify your total SDcard size~!
Reboot and enter recovery
Enter console
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7584
mkpartfs primary ext2 7584 8127
mkpartfs primary linux-swap 8127 8159
#print (to verify we have the 3 partitions)
Example for my 4GB card
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward * then grab a calculator to figure the exact amounts... as shown below that is an example..)
rm 1
rm 2
mkpartfs primary fat32 0 3420
mkpartfs primary ext2 3420 3932
mkpartfs primary linux-swap 3932-3964
"End?" you need to place the last value for the linux swap eg.3964 for my 4GB card
#print (to verify we have the 3 partitions)
Next we need to "quit" parted and upgrade our ext2 partition to ext3
#upgrade_fs
Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script
swap partition shouldnt be no larger than 92mb
ext2/3 partition shouldnt be more than 500mb ( more than that is too much )
( directions from a post by justanothercrowd )

Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz

stuck
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!

biz18434 said:
Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz
Click to expand...
Click to collapse
thanks for bringing that to my attention.. will try and fix it..
toconfuze1 said:
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!
Click to expand...
Click to collapse
during the paragon process it says do not interrupt it while it is formating, cause you pc can become unstable. and thats exactly what you did.. u might be able to press the esc button, i believe it gives that option at the bottom of the screen to exit it properly. but rebooting was wrong...
anytime u FORMAT any drive or card you will lose information, thats pc fundamentals... will add the issue about losing info to orig post..

was stuck
thanks a lot....fixed

Help
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
------------------------
Fix ******Update
It took me alot of time to figure this out. if anyone gets this problem just assign your sdcard a Letter. Example: E: Drive.
When i look at these tutorials it does not mention anything like that.
thanks anyways

stonefurry said:
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
Click to expand...
Click to collapse
1. did you do the fat32 first, then ext2 second ?
2. did you mount the sdcard to the pc ?
3. may show as F drive on your pc !!!

I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom

Androidandy said:
I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom
Click to expand...
Click to collapse
thank you for the info..
was looking for the commands to verify that the ext2 partition is done correctly, and of course it verifies that busybox is working also..

I'm having a large issue with my new Micro SD card.
When using PM and my MicroSD in an SD adapter it allows me to format and create partitions successfully JUST FINE with my Sandisk 2gb which is probably a class 2 or just not a class at all...it doesn't say on the card at all.
BUT I just bought a Transcend 8gb Class 6 HC card and when using the SD adapter the computer recognizes it just fine to open and view files...BUT Paragon says its "Invalid" and won't allow me to format, partition, or anything.
I have no idea what needs to be done differently. It works just fine in the phone and moving files but Paragon won't recognize it or allow it to be modified.

I need some help please!!!
First of I'm new to all this so I'm a nood and I need some help massively I have trying to make this ext2 partition on ubumtu for months and always get an error message and a lost and found folder in the ext2 partition. Found these directions and finally make the partition w/ no error messages. Fat32 1st then ext2 2nd type busybox command so I think its done right. So I try to mkdir /system/sd/app for marcus directions on apps to sd to use his apps to sd2 app and I get error /system/sd/app read only. Why is that so? I look in pargan partitioner were I made the parition and there both still there. I would be greatfull if anyone can help out a nood like me [email protected]. I have been trying to get this ext2 partiton for months and today thought I did it correct cause no error messages and boy was I wrong!! Please anyone help !!
Bronze G1 W/ JF 1.5 cupcake W/Areo
NO APPS TO SD1! HELP PLEASE
Saphire SLP
[email protected]

i like this tuturial, but one problem, doesnt work with vista 64bit -.-
im literally crying

So every time I try to format, my phone unmounts my damn card.
Any ideas?

worked for me on vista 64

missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
Using Paragon or windows?

missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
im have the same problems as her, i dunno why

I am running vista 64 and paragon profesional. I can get it to format and can get the ext2, but I can not do anything with the card. I try and reformat the fat32 and give it a letter for a drive but it wont take or if i format it and then create the ext2 it gives the ext the drive letter(both cannot have a drive) What gives and in the meantime I have to use the 1gig because although paragon recognizes the sd card my pc does not!

so i've done everything in the tutorial. and even the coding for checking busybox.
it doesnt show the ext2.
and i tried running the lucid commands
and it says ext2 is not mounted.

i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!

pr0cl1v1ty said:
i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!
Click to expand...
Click to collapse
are u using a sdcard reader ??

(Help)ReFormat Sd

Hy There,another silly Q from me!(sorry :angel, i made a lot of things with my sd(partition and all that)and now i just want to format for my android again, but Minitool dont give me that option, it give me CREATE PARTITION option but i just want to format without partition, Windows dont recognize my sd cause aint formatted, what can i do?and....ntfs or fat 32, and.....primary or logical?
thank you all

I recommend using SD Formatter 3.1 for SD/SDHC/SDXC by the SD Association
You might need to Google it as I can't post links yet.

Parted Magic
I suggest using parted magic or any equivalent pre windows boot partion management tools , beleive me they work wonders .

yes but the problem that i have, or question is this, cant i format without partitions?because the only way i can format now is doing a partition, and i let all the space of the sd in that partition, but i dont want more partitions.please, step by step.
thank you

maxxxz said:
yes but the problem that i have, or question is this, cant i format without partitions?because the only way i can format now is doing a partition, and i let all the space of the sd in that partition, but i dont want more partitions.please, step by step.
thank you
Click to expand...
Click to collapse
Parted magic > recreate mbr > create a single partition > voila

[Q]How to mount the 2nd partition of my SDCARD?

I just created a 2nd partition on my 8GB SD card so that i could move apps to it using link2sd...but when i open link2sd and select the file system of my SD card's 2nd partition (ext4) i get an error:
Mount script cannot be created.
mount: No such device.
ext4 may not be supported on your device. Try FAT32 on the second partition.
Click to expand...
Click to collapse
Other small question : Do I really need to mount the 2nd partition if I just wanna install custom ROMs?
Need help ASAP! thanks in advance .

Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it

ptcpayme said:
Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
I made the second partition as FAT 32 and it worked.
Now the only doubt i have is...will ROMS work on FAT32 partition?

kingcola said:
I made the second partition as FAT 32 and it worked.
Now the only doubt i have is...will ROMS work on FAT32 partition?
Click to expand...
Click to collapse
If you are on Stock then maybe FAT32 partition may have worked.. or even otherwise maybe it will work,.. haven't used a FAT32 sd partition since JaggyROM 2.x.x ( obviously my 1st partition is fat32 ) ... My second partition is an ext and it is advisable to have an ext partition cause there are many scripts like int2ext , s2e, etc which work well with an ext partition...
A partition is Not necessary to made in order for other ROMs to work.. They will work just as well without a partition .. only thing is your internal memory will remain to be 150 mb.. Which is the memory allocated in our phone's nand..
NOTE: Sense 4.0a is the only ROM that you necessarily need to have an SD-EXT Partition of at least 1 GB. Otherwise it won't boot.

thanks for helping me..

I partitioned (1GB of memory to fat32) my sdcard with MiniTool Partition Wizard to facilitate to link2sd long back. Now I am unable to recover that memory and merge into a single partition. Do you guys have solution for this?

delete the partition in disk mgmt..

kingcola said:
I just created a 2nd partition on my 8GB SD card so that i could move apps to it using link2sd...but when i open link2sd and select the file system of my SD card's 2nd partition (ext4) i get an error:
Other small question : Do I really need to mount the 2nd partition if I just wanna install custom ROMs?
Need help ASAP! thanks in advance .
Click to expand...
Click to collapse
If anyone still have the above issue then just change ur sdcard partition type to ext3. Reboot mobile. Better to use link2sd for this.

smartksr said:
I partitioned (1GB of memory to fat32) my sdcard with MiniTool Partition Wizard to facilitate to link2sd long back. Now I am unable to recover that memory and merge into a single partition. Do you guys have solution for this?
Click to expand...
Click to collapse
do it through mini partition tool..delete the created partition..now right click on the 1st partition..slect extend..n drag the cursor till end...n click apply...done

Use Other Kernel
The reason for your second partition is not recognized is you may be at Stock Rom and Stock kernel....
Stock kernel do not support ext partitions...
Use ateeq kernel or cranium kernel for ext4 partition support....
Also use Mounts2sd instead of link2sd...!!!!

I used mounts2sd after I created sd card partition(ext3) but this app said partition not mounted; but link2sd recognised n created scripts.
Sent from my GT-S5830i using xda app-developers app

RajeevBN said:
I used mounts2sd after I created sd card partition(ext3) but this app said partition not mounted; but link2sd recognised n created scripts.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Assuming you have the right kernel, install the startup script and change the driver in mounts2sd settings to ext3.
Sent from my Explorer A310e using XDA Premium 4 mobile app

Thanks mate!! Your ext3 suggestion worked perfectly for Link2SD on my droid.
BleedingIris said:
Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
Thanks mate!! Your ext3 suggestion worked perfectly for Link2SD on my droid. :good:

hey guys, is it possible to access the 2nd partition on Android or under Windows? Link2SD sees my 2nd partition and mounts it correctly, but assuming I want to copy e.g. music files to the 2nd partition using Root Explorer or using my PC, how do I do that? I tried both and they don't see my 2nd SD partition at all...

chaoscreater said:
hey guys, is it possible to access the 2nd partition on Android or under Windows? Link2SD sees my 2nd partition and mounts it correctly, but assuming I want to copy e.g. music files to the 2nd partition using Root Explorer or using my PC, how do I do that? I tried both and they don't see my 2nd SD partition at all...
Click to expand...
Click to collapse
Use EXt2FS search in google you will get it..
Install it in your windows.. reboot your pc.. Then connect your card.. You will get the second partiton to see plus you can copy paste as well..

THANKS jynt_panwar!!!!! I WAS LOKING FOR THIS FOR A YEAR!!!!!!!!!! The Link2sd don't work for my phone (ZTE Blade L3 stock rom 4.4.2), but the Mounts2sd saved my life!!! Also I followed the instructions in this site: INCREASE YOUR ANDROID INTERNAL MEMORY || BY MOUNTS2SD (BEST WAY) in androcustomroms site. Maybe it can help more people... And thanks XDA of course!

SD card 2nd partition is not getting mounted

Hi Friends
Yesterday I flashed my HTC Explorer with CM10.1 Beta 5 ([DEV][ROM][JDQ39E][4.2.2] CyanogenMod 10.1.2 | BETA#5 | 25/07/13 | WILD FOR THE NIGHT) . But with this build my phone is not mounting the second partition of size 2GB (total 16gb card) which I have created from recovery menu. I have tried with the Mini partition tool on windows for FAT32 too, but still its not mounting my either Link2SD, mount2SD or by the kernel (About Phone -> System partion).
Please help me as without mounting the 2nd partition I can not install any other app as very very less space is available after CM 10.1.
Thank you.

Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition

thekoolanie said:
Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition
Click to expand...
Click to collapse
Its still not working. I wonder, if we can do so many things in CM, why can not we simply integrate the script in to the rom itself. I'm damn sure 100% of HTC explorer users must be searching for a way to increase the internal memory of the phone also now a days sd cards are damn cheap.

There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment

There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
---------- Post added at 06:04 AM ---------- Previous post was at 05:55 AM ----------
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment

mount2sd NOT mounted SD-EXT on Samsung Galaxy Y Pro Duos
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.

xda_keevvee said:
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.
Click to expand...
Click to collapse
remove any sd. ext you made..create new ext partition using recovery and try..

shubhojit89 said:
remove any sd. ext you made..create new ext partition using recovery and try..
Click to expand...
Click to collapse
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek

xda_keevvee said:
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek
Click to expand...
Click to collapse
ya u can post the screenshots..

vice ereafe
See enclosed. The log file is empty but check the debug

xda_keevvee said:
See enclosed. The log file is empty but check the debug
Click to expand...
Click to collapse
create partition through recovery and make it ext4 coz ext4 is mounted easily..

shubhojit89 said:
create partition through recovery and make it ext4 coz ext4 is mounted easily..
Click to expand...
Click to collapse
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...

xda_keevvee said:
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...
Click to expand...
Click to collapse
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..

shubhojit89 said:
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..
Click to expand...
Click to collapse
it was kernel thing (BTW - there are very few recovery binaries for this phone, CWM is for example mostly in use as a temporary executed, loaded each tip from ZIP).
I have updated kernel to this:
http://forum.xda-developers.com/showthread.php?t=1913349
and things automatically got mounted (even made a partition using my PC and working same good)
thanks for participation

[Q] [ solved ] link2sd can't created mounting script fat32 on cm 10.1 unofficial

I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app

sultan arshad said:
I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Is your ext2 partition mounted or un-mounted when running Link2SD

Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...

sultan arshad said:
Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...
Click to expand...
Click to collapse
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.

SonicX2014 said:
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.
Click to expand...
Click to collapse
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge

sultan arshad said:
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge
Click to expand...
Click to collapse
There are two ways to do this. 1. If you have a recovery boot loader installed in your phone, you can simply log into your recovery and select advanced and then fix permissions. Once done reboot the phone. All partitions will have their flags set back to read write execute. The other way would be what you did, redo all the partitions again. The last one only works in Linux. I'm not a Windows user so I couldn't help there.
If your a Linux user and not sure how to take ownership of a hard drive or removable drives, let me know and I'll explain it in the next post.

link2sd mount script
Hi please the problem of mount script cannot be done still persist
Help me out I'm running cwm 5

Not sure if anyone's still reading this thread but I'm having this problem too. I formatted my microSD with MiniTool Partition Wizard. Only the 1st FAT32 partition is mounted in Android, how do you mount the 2nd partition?