Related
HOW TO PARTION WITH PARAGON PARTITION MANAGER
**** YOU WILL LOSE ANY INFO ON THE SDCARD - PLEASE BACK UP IMPORTANT INFO PRIOR TO STARTING THIS PROCESS ***
**** these are instructions for Windows XP ***
***** if you are using Windows Vista - You need to change the permissions to Administrative in order for this to work - RIGHT CLICK ON THE START BUTTON AND GO TO ADMIN SETTINGS - even if you are the only user of the PC
have the sdcard in the card reader or in the phone mounted to the pc !!!!
OPEN PARTITION MANAGER...
CLICK ON PARTITION MANAGER IN THE LOWER RIGHT HAND CORNER..
then click on the line that represents the sdcard, and right click on it, and choose format partition.. name the volume label - fat32
then click format..
computer might hang for a minute or 2, and then a popup will come up and say click GREEN CHECK to apply changes..
click the GREEN CHECK IN THE TOOLBAR AREA..
you will then see another pop up show - apply changes, choose yes, then you will see OVERALL PROGRESS AND GEARS TURNING.. LET IT PROCESS AND TAKE ITS TIME.. DONT HIT CANCEL..
when its done the cancel button at the bottom will change to Close.. click it..
AND THE FIRST STAGE IS DONE...
NOW ITS TIME TO CREATE THE EXT2 PARTITION..
Now on the Left side of the screen click Create partition.. and a screen will now show Create New Partition Wizard... it lets you chose which drive to partition ( make sure you chose the sdcard - it will be the one with the smallest volume/size of the sdcard in gbs.. should be on the bottom )...
HIT NEXT
now a slider will appear where it says new volume....
move the slider with the mouse, and make it how big you want it.. for ext2 partiiton about 500mb to 1gb is plenty... 500mb is good size.. ( size wont be exact so get it close to the size you want..
WHEN DONE CLICK NEXT...
NOW IT GIVES YOU THE OPTION TO FORMAT THE PARTITION...
CLICK THE PARTITION TYPE DROPDOWN MENU AND CHOSE LINUX EXT2... AND GIVE IT A VOLUME LABEL OF ext2.
then click next...
PC WILL PROCESS AND HOURGLASS WILL SHOW WHERE THE MOUSE POINTER IS.. AND THEN A POP UP WILL SHOW - SAYING -
COMPLETING THE CREATE NEW PARTTITION WIZARD..
CLICK FINISH...
THEN IT TAKES YOU BACK TO THE SCREEN SHOWING THE DRIVES, AND WHAT YOU CREATED, AND THE OPTION AT THE TOP WILL SAY - APPLY ... choose apply
THEN IT WILL ASK YOU TO - APPLY PENDING CHANGES AGAIN, choose yes..
NOW YOU WILL SEE THE GEARS WORKING AGAIN.. LET IT RUN TILL IT SAYS complete..
*it will take a few minutes to process.. let it run...
you might get a pop up for the sdcard drive as a open folder on the pc just showing that its done, just go back to paragon and let it finish running...
once complete you will get a pop up saying SYSTEM RESTART IS REQUIRED TO COMPLETE OPERATION.. CHOSE RESTART THE COMPUTER...
You will see a paragon manager screen, that will hang for a almost a minute, and then the bar will fill saying 100 percent complete, press any key to reboot the pc..
AS LONG AS THERE IS NO ERRORS, YOUR DONE..
FORMAT COMPLETE..
PARAGON WILL START UP ON ITS OWN, AND SHOW THE PARTITIONS AS BEING COMPLETE..
----
*****edit
Originally Posted by Androidandy
check that the ext2 partition is good by typing busybox df -h in terminal.
************************************************************EDIT *****************
If your having issues using paragon partition manager, and trying to make a linux swap partition, try these instructions for formating thru Cyanogens newest recovery
Formatting you SDcard
You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2
You need Recovery image 1.31 to do this folks!
To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!
You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted
Example for 8GB card (specific value's may be slightly different use print to verify your total SDcard size~!
Reboot and enter recovery
Enter console
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7584
mkpartfs primary ext2 7584 8127
mkpartfs primary linux-swap 8127 8159
#print (to verify we have the 3 partitions)
Example for my 4GB card
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward * then grab a calculator to figure the exact amounts... as shown below that is an example..)
rm 1
rm 2
mkpartfs primary fat32 0 3420
mkpartfs primary ext2 3420 3932
mkpartfs primary linux-swap 3932-3964
"End?" you need to place the last value for the linux swap eg.3964 for my 4GB card
#print (to verify we have the 3 partitions)
Next we need to "quit" parted and upgrade our ext2 partition to ext3
#upgrade_fs
Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script
swap partition shouldnt be no larger than 92mb
ext2/3 partition shouldnt be more than 500mb ( more than that is too much )
( directions from a post by justanothercrowd )
Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz
stuck
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!
biz18434 said:
Thank You, for a great post but, can you please fix this link *** word docx with screenshots - http://kaysesoze.wordpress.com/wp-ad...ttachment_id=4
When I signed in I received the following message "You are not allowed to edit this attachment." Again THANK YOU,
V/R
Biz
Click to expand...
Click to collapse
thanks for bringing that to my attention.. will try and fix it..
toconfuze1 said:
I installed paragon parttition manager 9 pro trial version after installtion I reboot and , it brought me to the blu paragon advance recovery screen...I notice I forgot to back up my sd card...but it won't let me out of this screen...tried rebooting it still brought me back to this screen...is there any solution for this problem....its gotta be something easy...I just don't know what to do to get back to my desktop.....HELP!!!!!!!!!PLEASE!!!
Click to expand...
Click to collapse
during the paragon process it says do not interrupt it while it is formating, cause you pc can become unstable. and thats exactly what you did.. u might be able to press the esc button, i believe it gives that option at the bottom of the screen to exit it properly. but rebooting was wrong...
anytime u FORMAT any drive or card you will lose information, thats pc fundamentals... will add the issue about losing info to orig post..
was stuck
thanks a lot....fixed
Help
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
------------------------
Fix ******Update
It took me alot of time to figure this out. if anyone gets this problem just assign your sdcard a Letter. Example: E: Drive.
When i look at these tutorials it does not mention anything like that.
thanks anyways
stonefurry said:
I know I am always running into problems. But i am freakin out about this and i don't know if this is the right thread to be posting this or maybe someone can lead me to other thread with this fix.
Question
First i partitioned my mini sd card using my G1 with paragon manager and when everything was done the computer restarts.
But the weired thing is that now when i mount my G1. My G1 is recognized by my computer but it does not show me the storage device on my computer folder or even prompt me with opening a folder for my storoge card. I am freakin out.
Things i tried.
1. Rebooted my phone
2. nandrroid backup restore
3. restarted my computer
4. changed minisd cards.
5. uninstalling the usb android driver and reapplying it
6. went to usb debug on the settings on the phone
nothing worked.
Thanks . Any help would do.
Click to expand...
Click to collapse
1. did you do the fat32 first, then ext2 second ?
2. did you mount the sdcard to the pc ?
3. may show as F drive on your pc !!!
I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom
Androidandy said:
I used PM 10, it is very easy. However when the program wants to reboot it says there is an error, but I check that the ext2 partition is good by typing busybox df -h in terminal.
I've partitioned several cards now and they all work.
I found that doing a wipe then installing Lucid's rom.
I reinstall my applications from mybackup pro and downloading others from the market.
I test everything is working fine, then and only then I use the scripts that Lucid posted.
To recap ensure that busybox recognises the ext2 partition then wipe, install Lucids rom
Click to expand...
Click to collapse
thank you for the info..
was looking for the commands to verify that the ext2 partition is done correctly, and of course it verifies that busybox is working also..
I'm having a large issue with my new Micro SD card.
When using PM and my MicroSD in an SD adapter it allows me to format and create partitions successfully JUST FINE with my Sandisk 2gb which is probably a class 2 or just not a class at all...it doesn't say on the card at all.
BUT I just bought a Transcend 8gb Class 6 HC card and when using the SD adapter the computer recognizes it just fine to open and view files...BUT Paragon says its "Invalid" and won't allow me to format, partition, or anything.
I have no idea what needs to be done differently. It works just fine in the phone and moving files but Paragon won't recognize it or allow it to be modified.
I need some help please!!!
First of I'm new to all this so I'm a nood and I need some help massively I have trying to make this ext2 partition on ubumtu for months and always get an error message and a lost and found folder in the ext2 partition. Found these directions and finally make the partition w/ no error messages. Fat32 1st then ext2 2nd type busybox command so I think its done right. So I try to mkdir /system/sd/app for marcus directions on apps to sd to use his apps to sd2 app and I get error /system/sd/app read only. Why is that so? I look in pargan partitioner were I made the parition and there both still there. I would be greatfull if anyone can help out a nood like me [email protected]. I have been trying to get this ext2 partiton for months and today thought I did it correct cause no error messages and boy was I wrong!! Please anyone help !!
Bronze G1 W/ JF 1.5 cupcake W/Areo
NO APPS TO SD1! HELP PLEASE
Saphire SLP
[email protected]
i like this tuturial, but one problem, doesnt work with vista 64bit -.-
im literally crying
So every time I try to format, my phone unmounts my damn card.
Any ideas?
worked for me on vista 64
missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
Using Paragon or windows?
missxoash said:
So every time I try to format, my phone unmounts my damn card.
Any ideas?
Click to expand...
Click to collapse
im have the same problems as her, i dunno why
I am running vista 64 and paragon profesional. I can get it to format and can get the ext2, but I can not do anything with the card. I try and reformat the fat32 and give it a letter for a drive but it wont take or if i format it and then create the ext2 it gives the ext the drive letter(both cannot have a drive) What gives and in the meantime I have to use the 1gig because although paragon recognizes the sd card my pc does not!
so i've done everything in the tutorial. and even the coding for checking busybox.
it doesnt show the ext2.
and i tried running the lucid commands
and it says ext2 is not mounted.
i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!
pr0cl1v1ty said:
i get all the way to the ext2 part the very last thing
like mount/dismount and i get a error
saying to close a program or restart pc
cant close program because i dont know what it is so i click retry same error
i restarted pc 2 times
still same thign tried reformatting all over again what am i doing wrong? thanks guys!
Click to expand...
Click to collapse
are u using a sdcard reader ??
I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
jdubdieslo said:
I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
Click to expand...
Click to collapse
wipe sd: ext partition- deletes your apps on your ext partiton
wipe sd: davlik-cache wipes your cache on your sd
part sd: fat32+ext2+swap makes the three partitions you need to run hero roms
parted sd: fat32 only- just partitions your memory card for a fat32 for stock roms like cyanogen
convert ext2 to ext3- does exactly what it says. makes ext2 to ext3
repair ext filesystem- do this after you choose to convert ext2 to ext3
fix apk uid mismatches- does exactly what it says
fix rotate- fixes auto rotate issues some roms have
usb mass storage on- allows you to access your fat32 part of your sd from the recovery
usb mass storage off- turns off the mounting of your sd from the recovery
to flash it using the recovery flasher app, just look at the unlockr's video and substitute the recovery image name for the one that is in the video. Voila.
Hope this helps
Applause...
Getting a straight answer sometimes is the most difficult part of installing a rom.
thelastgoodbrother said:
Applause...
Getting a straight answer sometimes is the most difficult part of installing a rom.
Click to expand...
Click to collapse
lol thats very true but come on if you can't do the research to figure out the basic youll be posting another thread the next day but this time it'll be called "stuck on the g1 screen" lol sometimes not giving a straight answer may save their phone... but thats just my opinion
So use part sd: fat32+ext2+swap when useing hero rom... what if i use hero rom & go back to cyanogen can i leave it that way or do i need to parted sd: fat32 only? also if i did part sd: fat32+ext2+swap And then did part sdnly fat32 would it override the part sd: fat32+ext2+swap. another question i dont even know what ext 2 is so moving it to ext 3 would be? sorry guys im new at this.. just wanted to clarify this. is fat32 letting me store apps to sd? because i removed the sd card while phone was on & notices it froze; i put it back in removed & rrplaced battery and it was fine again.. also i noticed i part sd: fat32+ext2+swap again before i read your replies to see what it would do and everything on my sd card was goin..
also what is swap i saw an app that saved a swap file on sd..
thanks everyone for you help. loving the android community. as soon as i get some extra cash i will be donating to people that helped me make my android stand out from any one's android on my end of the computer. thanks
jdubdieslo said:
So use part sd: fat32+ext2+swap when useing hero rom... what if i use hero rom & go back to cyanogen can i leave it that way or do i need to parted sd: fat32 only? also if i did part sd: fat32+ext2+swap And then did part sdnly fat32 would it override the part sd: fat32+ext2+swap. another question i dont even know what ext 2 is so moving it to ext 3 would be? sorry guys im new at this.. just wanted to clarify this. is fat32 letting me store apps to sd? because i removed the sd card while phone was on & notices it froze; i put it back in removed & rrplaced battery and it was fine again.. also i noticed i part sd: fat32+ext2+swap again before i read your replies to see what it would do and everything on my sd card was goin..
also what is swap i saw an app that saved a swap file on sd..
thanks everyone for you help. loving the android community. as soon as i get some extra cash i will be donating to people that helped me make my android stand out from any one's android on my end of the computer. thanks
Click to expand...
Click to collapse
If you are running a hero rom and want to go to cyanogen, you can leave the fat32+ext2+swap. Just make sure that you wipe your sd partition and davlik cache using the options in the recovery image. Do this every time you are flashing any new rom for that matter, whether it's a different hero rom or a stock rom.
Ext is the partition of your memory card that stores all your apps. This was necessary for the g1 because it only had like 80 mb of memory for apps. The mytouch has nearly 300 so apps2sd is not really necessary, but most custom ROMs include this anyway. Ext3 is what most of these ROMs operate on. Ext2 is an old outdated version that no one really uses anymore and ext4 is even newer than ext3 but is not really necessary.
Fat32 only does not let you store your apps on your sd. It does not have the ext partition to let that happen. I don't know why your phone froze when you took your sd card out. It shouldn't have. When you part your memory card, whether its just fat32 or the combo fat, ext, and swap your memory card gets wiped and formatted to whatever you have, so of course you will lose all your contents on the memory card. It wipes and reformats all 3 partitons, or just the one if you are doing only the fat32.
As for swap, this is necessary for hero. Hero phones have 288 mb of ram and the mytouch only has 192mb so if you don't have this, the phone lags so bad and hangs up and you get constant load screens. The app you saw is known as swapper. Yes it does put a swap file on your sd card, but if you go into advanced settings, it lets you use your swap partition of your memory card, which is what you should always choose.
Keep them questions rolling, I like being able to contribute whenever I can.
tazz9690 said:
If you are running a hero rom and want to go to cyanogen, you can leave the fat32+ext2+swap. Just make sure that you wipe your sd partition and davlik cache using the options in the recovery image. Do this every time you are flashing any new rom for that matter, whether it's a different hero rom or a stock rom.
Ext is the partition of your memory card that stores all your apps. This was necessary for the g1 because it only had like 80 mb of memory for apps. The mytouch has nearly 300 so apps2sd is not really necessary, but most custom ROMs include this anyway. Ext3 is what most of these ROMs operate on. Ext2 is an old outdated version that no one really uses anymore and ext4 is even newer than ext3 but is not really necessary.
Fat32 only does not let you store your apps on your sd. It does not have the ext partition to let that happen. I don't know why your phone froze when you took your sd card out. It shouldn't have. When you part your memory card, whether its just fat32 or the combo fat, ext, and swap your memory card gets wiped and formatted to whatever you have, so of course you will lose all your contents on the memory card. It wipes and reformats all 3 partitons, or just the one if you are doing only the fat32.
As for swap, this is necessary for hero. Hero phones have 288 mb of ram and the mytouch only has 192mb so if you don't have this, the phone lags so bad and hangs up and you get constant load screens. The app you saw is known as swapper. Yes it does put a swap file on your sd card, but if you go into advanced settings, it lets you use your swap partition of your memory card, which is what you should always choose.
Keep them questions rolling, I like being able to contribute whenever I can.
Click to expand...
Click to collapse
ao since ext 2 is outdate we want to convert ext 2 to ext 3 then repair ext filesystemafter words.. so if you convert ext 2 to ext 3 is there only a ext 3 now or both ext 2 and it adds a ext 3? also what does dalvik mean? also i thought apps to sd was a big deal because if you switch roms all your apps are still there, but if you wipe ext partition then you lose the apps so the real reason is just for phone with low ram and cant store many apps at once.. intresting..and wats up with not wipe data/factory reset after installing roms? whats the reason behind that, i notice my IME keyboard is no longer there when i do that.. im trying to think of more questions lol. thanks a million.
jdubdieslo said:
ao since ext 2 is outdate we want to convert ext 2 to ext 3 then repair ext filesystemafter words.. so if you convert ext 2 to ext 3 is there only a ext 3 now or both ext 2 and it adds a ext 3? also what does dalvik mean? also i thought apps to sd was a big deal because if you switch roms all your apps are still there, but if you wipe ext partition then you lose the apps so the real reason is just for phone with low ram and cant store many apps at once.. intresting..and wats up with not wipe data/factory reset after installing roms? whats the reason behind that, i notice my IME keyboard is no longer there when i do that.. im trying to think of more questions lol. thanks a million.
Click to expand...
Click to collapse
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
yeah it is safest way to wipe and reformat the sd card before flashing a new rom.
tazz9690 said:
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
Click to expand...
Click to collapse
Previously I got a 2GB micro-sd card. so no problem for me to move my music, photos, videos and backup apps to my pc.
But i just bought a 8GB card 2 weeks ago and man, backup all before flashing a rom is pain in the a** . but can't help flashing this and that ROMs hee hee
so no choice. yesterday I flashed Eugene's supermagic rom. awesome!
cheers
tazz9690 said:
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
Click to expand...
Click to collapse
so when going to another rom should you part the sd before or after the rom is loaded? and honestly im running out of questions.. i got one that is throwing me off.. i have my phone in fastboot and in device manager it show andriod bootloader (cant remember the exact device); i type in the cmd
cd desktop
cd fastboot
then the code for the custom splash and i get
< waiting for device > and it just sits there. nothing will happen. & my splash is still stock.. the file is at the rights bytes and i have the folder on my cd on the desktop and the driver i beleive is installed correctly on the cp. what am i doing wrong?
I think the Title should be Changed, Something Like Recovery-101. Know Your Phone.
Alot of great Info for New comers
jdubdieslo said:
so when going to another rom should you part the sd before or after the rom is loaded? and honestly im running out of questions.. i got one that is throwing me off.. i have my phone in fastboot and in device manager it show andriod bootloader (cant remember the exact device); i type in the cmd
cd desktop
cd fastboot
then the code for the custom splash and i get
< waiting for device > and it just sits there. nothing will happen. & my splash is still stock.. the file is at the rights bytes and i have the folder on my cd on the desktop and the driver i beleive is installed correctly on the cp. what am i doing wrong?
Click to expand...
Click to collapse
Part the sd before you load the rom onto the phone. if it has apps2sd and you try to part your memory card after, you will get stuck at the splash more than likely because you are missing key components that are stored onto the sd, like all your apps for example that come with the ROM.
In fastboot, when it's plugged in, on the phone does it say "Fastboot USB"?
You might want to try to reupload the drivers for the fastboot. That may be why it's hanging. I never use fastboot through the desktop. I always use fastboot through the SDK folder on my C:\ drive. It always worked for me that way. For some reason I could never get it to work with the "cd destop" but thats just me.
tazz9690 said:
Part the sd before you load the rom onto the phone. if it has apps2sd and you try to part your memory card after, you will get stuck at the splash more than likely because you are missing key components that are stored onto the sd, like all your apps for example that come with the ROM.
In fastboot, when it's plugged in, on the phone does it say "Fastboot USB"?
You might want to try to reupload the drivers for the fastboot. That may be why it's hanging. I never use fastboot through the desktop. I always use fastboot through the SDK folder on my C:\ drive. It always worked for me that way. For some reason I could never get it to work with the "cd destop" but thats just me.
Click to expand...
Click to collapse
i figured taht was the right order part sd then load rom because i did it and it worked lol, and since it worked i never tried it rom the part sd. so do cyanogen roms have app2sd? and does the cyanogen rom have a overclocker built in now because i tried to use my overclock widget and it doesnt work and the phone seems as if its running faster even with out my widget..
and yes it says fastboot usb & ive tried uninstalling & reinstall the drivers mutliple times and still get < waiting for device > so if i do it on the c:/ drive were do i place the fastboot folder? /c:/fastboot? and what would the code be?
cd c:/
cd Fastboot
thent he other code that i have saved at home the flash_splash one? i cant remember it.
one really dumb question. i rooted my pops mytouch lol because he was complaining about the mytouch stock because of numerous things. so i rooted it to 4.2.2 and out of all things he is now complaining about the stock ringtones.. lol. anyone know where to get the stock ringtones? if not its cool i told him id make sum ringers with ringdroid for him like the temptations and willie nelson lol.. thanks all for your support.
jdubdieslo said:
i figured taht was the right order part sd then load rom because i did it and it worked lol, and since it worked i never tried it rom the part sd. so do cyanogen roms have app2sd? and does the cyanogen rom have a overclocker built in now because i tried to use my overclock widget and it doesnt work and the phone seems as if its running faster even with out my widget..
and yes it says fastboot usb & ive tried uninstalling & reinstall the drivers mutliple times and still get < waiting for device > so if i do it on the c:/ drive were do i place the fastboot folder? /c:/fastboot? and what would the code be?
cd c:/
cd Fastboot
thent he other code that i have saved at home the flash_splash one? i cant remember it.
one really dumb question. i rooted my pops mytouch lol because he was complaining about the mytouch stock because of numerous things. so i rooted it to 4.2.2 and out of all things he is now complaining about the stock ringtones.. lol. anyone know where to get the stock ringtones? if not its cool i told him id make sum ringers with ringdroid for him like the temptations and willie nelson lol.. thanks all for your support.
Click to expand...
Click to collapse
Cyanogen's rom has dynamic apps2sd. If it senses that you have a partition, it will do apps2sd. If you don't have an ext, it will save it to the phone, so it will work that way too.
For the fastboot, do you even have your computer set up for the use of ADB and fastboot? Like having the latest SDK downloaded and set up for your computer? That might be why it says, waiting for devices. When you do cd fastboot, afterward type fastboot devices and see if in the cmd it says "HTC Bootloader" or "Android Bootloader" I am not sure which one it is.
As for the ringtones, here is the link for the download in Cyanogen's 4.2.2 threat http://n0rp.chemlab.org/android/audio-resources.zip That downloads a zip of all the stock ringtones. Just upzip the file and place it on the root of your sd card.
tazz9690 said:
Cyanogen's rom has dynamic apps2sd. If it senses that you have a partition, it will do apps2sd. If you don't have an ext, it will save it to the phone, so it will work that way too.
For the fastboot, do you even have your computer set up for the use of ADB and fastboot? Like having the latest SDK downloaded and set up for your computer? That might be why it says, waiting for devices. When you do cd fastboot, afterward type fastboot devices and see if in the cmd it says "HTC Bootloader" or "Android Bootloader" I am not sure which one it is.
As for the ringtones, here is the link for the download in Cyanogen's 4.2.2 threat http://n0rp.chemlab.org/android/audio-resources.zip That downloads a zip of all the stock ringtones. Just upzip the file and place it on the root of your sd card.
Click to expand...
Click to collapse
thats good to know. so if you ext 2 will cm use ext 2 & if you converted it will it use ext 3? also how can i tell what i have ext 2 or ext 3 other than knowing if i click convert to ext 3? i downloaded the SDK and used the usb folder when the computer was looking for drivers & it says it installed drivers successfully; so now when im in fastboot usb on my phone the computer in device manager shows bootloader (cant remember exactly what it says untill i get home); & when my phone is in recovery the driver shows ADB (cant remember the exact name till i get home also); and then i do the codes because my fastboot & sdk folders are on my desktop; when i downloaded the sdk folder i dont think i did anything with it as far as isntalling it, what does the sdk folder do? lol. sorry..
thanks for the ringtones my pops says mucho gracias.
jdubdieslo said:
thats good to know. so if you ext 2 will cm use ext 2 & if you converted it will it use ext 3? also how can i tell what i have ext 2 or ext 3 other than knowing if i click convert to ext 3? i downloaded the SDK and used the usb folder when the computer was looking for drivers & it says it installed drivers successfully; so now when im in fastboot usb on my phone the computer in device manager shows bootloader (cant remember exactly what it says untill i get home); & when my phone is in recovery the driver shows ADB (cant remember the exact name till i get home also); and then i do the codes because my fastboot & sdk folders are on my desktop; when i downloaded the sdk folder i dont think i did anything with it as far as isntalling it, what does the sdk folder do? lol. sorry..
thanks for the ringtones my pops says mucho gracias.
Click to expand...
Click to collapse
I don't think any builds use ext2 anymore. They all either use ext3 or ext4. You have to make an ext2 first though, before you can convert it to ext3. Same goes for ext4, you have to have ext3 before you can upconvert to it. Just use ext3 just to be safe. If you go into "Parted" through the recovery image by typing in "parted /dev/block/mmcblk0" in adb shell, then typing 'print' it will show how big your fat32 is, it'll say which ext you have as well as your size, and the same for linux swap.
For a SDK, the folder stores the drivers needed for fastboot and adb in it. You should save it to the root of your C:\ drive because it makes things easier. I recommend you set up SDK using this thread guide: http://forum.xda-developers.com/showthread.php?t=532719
Setting up the Android 1.5r2 SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows-1.5_r2" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows-1.5_r2\tools
--------------------------------------------------------------------------
Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
--------------------------------------------------------------------------
Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows-1.5_r2\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
Those are basically what you need to look at.
jdubdieslo said:
I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
Click to expand...
Click to collapse
Don't mean to hijack your thread OP, but I do have a question that I hope someone can answer. When partitioning the SD card, you choose the option I put in Bold. After that, could you use this link:
http://forum.xda-developers.com/showthread.php?t=535914
To adjust the different sizes of the 3 partitions? I know that in order to run any Hero ROMS, your SD card has to be partitioned with at least 3 (fat32+ext2+swap) parts. This is the only part that still confuses me when it comes to adequately rooting.
If you are using ubuntu, you create the partitions you want, as well as the size. If you use the recovery image, you would just be adding an unnecessary step because it will just get deleted when you make your partitions again with Ubuntu.
tazz9690 said:
I don't think any builds use ext2 anymore. They all either use ext3 or ext4. You have to make an ext2 first though, before you can convert it to ext3. Same goes for ext4, you have to have ext3 before you can upconvert to it. Just use ext3 just to be safe. If you go into "Parted" through the recovery image by typing in "parted /dev/block/mmcblk0" in adb shell, then typing 'print' it will show how big your fat32 is, it'll say which ext you have as well as your size, and the same for linux swap.
For a SDK, the folder stores the drivers needed for fastboot and adb in it. You should save it to the root of your C:\ drive because it makes things easier. I recommend you set up SDK using this thread guide: http://forum.xda-developers.com/showthread.php?t=532719
Those are basically what you need to look at.
Click to expand...
Click to collapse
So if u have a ext 3 how do u get ext 4? Also wat is linux swap? And yea i didnt do all that im sure thats why i was getting < waiting for device >. I will let u know the outcome of the splash screen... thanx.
jdubdieslo said:
So if u have a ext 3 how do u get ext 4? Also wat is linux swap? And yea i didnt do all that im sure thats why i was getting < waiting for device >. I will let u know the outcome of the splash screen... thanx.
Click to expand...
Click to collapse
If you want ext3, you have to go into parted like I stated in a previous post and create your partitions that way. From there, to upgrade to ext3, you type "upgrade_fs". You now have ext3. If you want ext 4, after that you would type
"tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
e2fsck -fpDC0 /dev/block/mmcblk0p2"
That's just too much work for me. I am fine with ext3. If you want a more in depth explanation, go to this thread: http://forum.xda-developers.com/showthread.php?t=534714&highlight=wipe+partition
Linux swap, I believe I explained in one of my early posts. The mytouch only has 192 mb of ram. The Hero's have 288 and so do the 32A board Sapphire phones like the HTC Magic and the Rogers Magic. Since we were unfortunate to get that low of Ram, if you try to run a hero rom without the linux partition, the phone will lag, freeze, and get load screens constantly. Using a linux swap partition makes it possible to run the Hero ROM's at a decent speed, though it will not be as fast as if you had the actual HTC Hero phone or a 32A Sapphire.
Hi there first of all sorry for my wrong section and double post but in general forum nobody helped me.
My problem is:i partitionate my 4gb sd card via cwm recovery(512 ext-256swap).
Format cache partiotions.(cwm)
Format sd card.(cwm)
After that i create a fs.data2sd with mmcblk0p2 insde in sdcard/android/data/g3mod.
I install link2sd application but when i start it it tell me that my ext is not mounter.
In Cwm recovery when i press mount sd-ext it gave me an error(i think is:``the file exists already`` or something like this).
In settings/storage my phone tell me i have a 3gb card...so i think partition is done succefully..
So can someone explain what i need to do further.
Thanks alot for you help and i am glad to be member of Xda!
edit:now my sd card is stucked at 3gb how can i extend it back to 4gb?
mod Edit : thread CLOSED u cant do a dual post u need to be patient when posting
use the general or the Q&A(this is a stiky)
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
mohitgalaxy3 said:
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
Click to expand...
Click to collapse
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
ghiurtuv said:
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
Click to expand...
Click to collapse
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
mohitgalaxy3 said:
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
Click to expand...
Click to collapse
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
ghiurtuv said:
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
Click to expand...
Click to collapse
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
mohitgalaxy3 said:
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
Click to expand...
Click to collapse
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
ghiurtuv said:
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
Click to expand...
Click to collapse
you will just need CWM nothing else....
Harry move this thread........
mohitgalaxy3 said:
you will just need CWM nothing else....
Harry move this thread........
Click to expand...
Click to collapse
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
ghiurtuv said:
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
Click to expand...
Click to collapse
On which ROM you are?
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Finaly i connect to pc but i think data2sd is not working...i install titanium and link2sd...in titanim it show me like this:
System ROM:219MB(20.0 MB free)
Internal: 201MB(77.2MB free)
Sd card: 3.31GB(3.31GB free)
in link 2sd it tell me mount script error.
i need to do domething more?
edit:i choose 512 mb for ext
ghiurtuv said:
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Click to expand...
Click to collapse
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
mohitgalaxy3 said:
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
Click to expand...
Click to collapse
Try G3 mod app to convert partitions...
mohitgalaxy3 said:
Try G3 mod app to convert partitions...
Click to expand...
Click to collapse
I have a file fs.curent in g3mod folder and is like this
ext2
ext4
ext2
i think is converted...but how this help me?cuz in titanium backup i don`t see any a2sd memory..
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
ghiurtuv said:
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
Click to expand...
Click to collapse
No idea..........try fugumod kernel...remove all the files
I try fugumod 2.2 BE oc 1300mhz...but i think not kernel is problem...
Can anyone help me?pls...
edit:nothing changed on fugumod...i don`t see a2sd in titanium!
I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app
sultan arshad said:
I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Is your ext2 partition mounted or un-mounted when running Link2SD
Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...
sultan arshad said:
Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...
Click to expand...
Click to collapse
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.
SonicX2014 said:
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.
Click to expand...
Click to collapse
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge
sultan arshad said:
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge
Click to expand...
Click to collapse
There are two ways to do this. 1. If you have a recovery boot loader installed in your phone, you can simply log into your recovery and select advanced and then fix permissions. Once done reboot the phone. All partitions will have their flags set back to read write execute. The other way would be what you did, redo all the partitions again. The last one only works in Linux. I'm not a Windows user so I couldn't help there.
If your a Linux user and not sure how to take ownership of a hard drive or removable drives, let me know and I'll explain it in the next post.
link2sd mount script
Hi please the problem of mount script cannot be done still persist
Help me out I'm running cwm 5
Not sure if anyone's still reading this thread but I'm having this problem too. I formatted my microSD with MiniTool Partition Wizard. Only the 1st FAT32 partition is mounted in Android, how do you mount the 2nd partition?
hi guys.I got micromax a58. rooted.using framaroot. installed busy box , terminal emulater, root explorer and link2sd. I partitioned my 8gb memory card into 6.40gb fat32 primary and tried the second partition in all formats. ext2 ext3 ext4 and fat32. nothing worked. I set both to primary. then I learnt about manual mount script. also could not find install-recovery.sh. could not find it any where. please help me to in grease my internal memory. please please. thanks to every body who help me. at present my second partition is ext2. how to find install-recovery.sh? give me step by step guide. please.
naveen cj said:
hi guys.I got micromax a58. rooted.using framaroot. installed busy box , terminal emulater, root explorer and link2sd. I partitioned my 8gb memory card into 6.40gb fat32 primary and tried the second partition in all formats. ext2 ext3 ext4 and fat32. nothing worked. I set both to primary. then I learnt about manual mount script. also could not find install-recovery.sh. could not find it any where. please help me to in grease my internal memory. please please. thanks to every body who help me. at present my second partition is ext2. how to find install-recovery.sh? give me step by step guide. please.
Click to expand...
Click to collapse
there is always solution for most of ur problems.just search the forum.
here is the link for step by step tutorial including sdcard partitioning..
http://forum.xda-developers.com/showthread.php?t=2142844
I searched the whole day sir. unable to create mount script. unable to find instsll-recovery.sh. could you tell me if I can add that 1gb again to main 6.40gb.? if so please tell me. I at least go with app2sd. or please help me with link2sd. please sir. help me out. I am trusting on you people.
naveen cj said:
I searched the whole day sir. unable to create mount script. unable to find instsll-recovery.sh. could you tell me if I can add that 1gb again to main 6.40gb.? if so please tell me. I at least go with app2sd. or please help me with link2sd. please sir. help me out. I am trusting on you people.
Click to expand...
Click to collapse
does link2sd detects your second ext2 partition? if yes... pls wait for somebody else to help you.if it is not detected, just follow the steps carefully in the tutorial (link given in first reply).
this is what happened: when I click ext2 ext3 ext4 or fat32 it shows mount script cannot be created. when I see in storage info it says sdcard 2 no mount. intact I followed that guide to partition. 6.40gb primary fat32. and 1gb primary ext2 (at present) tried ext 3 4 and fat 32. every time it shows no mount script. do yo still say that my partition is wrong? please help me. also say where is install-recovery.sh located. if I find that it will be done. note: I use micromax a58
I hope you are using Andrr 4.2 and be sure that you are using latest link2sd app from playstore.I know that some older version of link2sd doesn't support 4.2 . will cause mount script error.
first of all... forget about script now... I cant help you with scripts..But im sure that you can do without a script. because I also faced the same situation that u r facing...
tried all filesystems allways shows me mount error..
but I started from the scratch slowly following each and every step carefully., I succeeded with ext2 filesystem. thats why I told you to follow that steps carefully. .
I dont have any link to tutorial for the scripts for you now..
ill post it here once I get it..
all the best
scratch means? you merged everything and again partitioned it? first I moved all data to system. and I partitioned it as I mentioned previously. total 7.40gb. after deleting all became unallocated. I split it into 2. one is primary, 6.40gb,fat32. another is primary, 1gb,ext2. installed link2sd. selected ext2.(also tried others). it said mount script not created.. also said to try fat32/16. I again inserted in computer. clicked the second partition. clicked delete partition (did I make mistake here?). and the second partition(ext2) became unallocated. didn't touch the first partition. after second became unallocated, I tried fat32. not worked. repeated the process for all.(ext3,ext4) nothing worked. mount script not created. that's why I entered into scripts and downloaded root explorer, busybox and terminal emulator. but couldn't find install-recovery.sh. this is my situation. have I made mistake in partition? help me sir. please.
naveen cj said:
scratch means? you merged everything and again partitioned it? first I moved all data to system. and I partitioned it as I mentioned previously. total 7.40gb. after deleting all became unallocated. I split it into 2. one is primary, 6.40gb,fat32. another is primary, 1gb,ext2. installed link2sd. selected ext2.(also tried others). it said mount script not created.. also said to try fat32/16. I again inserted in computer. clicked the second partition. clicked delete partition (did I make mistake here?).....
Click to expand...
Click to collapse
yes just start by deleting all partition..mini patrition tool is best for this purpose.
try to make ur fat partition as active.
both must be primary
after partitioning make sure your partition showing with size specified by you.you can use diskinfo app from playstore.
do a restart...
still if u cant .......
I saw some script details here...
http://forum.xda-developers.com/showthread.php?t=2142844&page=2
and
http://forum.xda-developers.com/showthread.php?t=1713478
be careful.. I dont hav any experience in creating these scripts...
in link2sd it says SD card 2nd part not mounted is my partitioning wrong? any way to find if my partition. .is correct? how to find whether my sdcard has ext2? note I have terminal emulator, root explorer,busy box and link2sd.
downloaded disk info. in SD card it shows mmcblk0p1 ( my main fat32 primary 6.40gb) and mmcblk0p2 ( my second ext 2 primary 1gb). mount point shows none. how to mount it? shall I merge my two partitions and again partition it? if so what should I give for second partition? ext2 or 3 or 4 or fat32? do I have to follow trial and error method? please help me sir.
naveen cj said:
downloaded disk info. in SD card it shows mmcblk0p1 ( my main fat32 primary 6.40gb) and mmcblk0p2 ( my second ext 2 primary 1gb). mount point shows none. how to mount it? shall I merge my two partitions and again partition it? .
Click to expand...
Click to collapse
yes,you can delete all partitions and start again.try to make your first partition as active. use mini partition tool to partition ur sdcard.for second partition
use ext2 filesystem it is supported by almost all roms .if you still stucked try with fat32.
thats all.. if u still not able to mount try those scripts (link already given) at ur own risk.
how to make first partition as active with mini tool partition? I have been using that tool from the beginning. I want to merge those partitions and split it again right?