I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app
sultan arshad said:
I install link2sd on my cm10.1 and partition my 8gb SD card with mini tool partition wizard home edition I make 1.3 SD fat 32 partition for apps installation and the left for data
But link2sd can't create mounting script the error is.
(Mount: mounting/dev/block/vold/179:2 on/data/sdext2 failed: device or resource busy)
if some one know the solution please tell me I don't need to recreat the partition. And format the whole SD card. As a long process n time will spend to do bla bla .
Thanks in advance
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Is your ext2 partition mounted or un-mounted when running Link2SD
Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...
sultan arshad said:
Theres fat 32. Partition. I created because cm 10.1. Not supported. Ext. ... Anyway. I solve the problem by recreating. The partition. ...
Click to expand...
Click to collapse
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.
SonicX2014 said:
Glad to hear you fixed it. When I had this problem it was a ext3 partition under the wrong ownership. I had to change ownership from user to root and it worked.
Click to expand...
Click to collapse
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge
sultan arshad said:
Hmm sounds interesting ..
Wanna know how to change ownership. just for increasing knowledge
Click to expand...
Click to collapse
There are two ways to do this. 1. If you have a recovery boot loader installed in your phone, you can simply log into your recovery and select advanced and then fix permissions. Once done reboot the phone. All partitions will have their flags set back to read write execute. The other way would be what you did, redo all the partitions again. The last one only works in Linux. I'm not a Windows user so I couldn't help there.
If your a Linux user and not sure how to take ownership of a hard drive or removable drives, let me know and I'll explain it in the next post.
link2sd mount script
Hi please the problem of mount script cannot be done still persist
Help me out I'm running cwm 5
Not sure if anyone's still reading this thread but I'm having this problem too. I formatted my microSD with MiniTool Partition Wizard. Only the 1st FAT32 partition is mounted in Android, how do you mount the 2nd partition?
Related
I installed this and have all apps set. I thought this would save more internal space than just installing to sd? I have not gained any space with this??? I do however notice they load faster at boot though. am I incorrect in thinking it would gain me internal storage?
thanks
Sent from my VM670 using Bumblebee rom and Tapatalk
You need to manually move whatever your want to SD. (In settings you can choose apps, dalvik cache and libs; do not bother with libs, they will be back to /system after reboot). Anything already on SD (the native way, in android_secure on FAT) needs to be moved back to phone first.
N.B. You need a second partition for this on your SD card, in case you have not done it, it will not work at all
I moved everything back to phone then did the link2sd with libs and see no difference in space left
Sent from my VM670 using Tapatalk
is there a way to delete the lib file I did link? very confused why internal storage stayed the same?
Sent from my VM670 using Tapatalk
What lib file? Yeah, you are very confused really.
because you said not to bother with linking the libs..
my real question is this...
should link2sd save more internal space than just moving all apps to sd? if so.. mine did not..
thanks for the help
Sent from my VM670 using Tapatalk
Dunno how are you checking the saved/free space, if it is some widget then I would suggest to reboot the phone.
Hi! I'm on LG Optimus One and Gingerbread-2.3.4-rc4.1 /CM7 rom. My SD has one 512 MB ext3 partition and one 3,5 GB fat32 partition, class 4. When I run link2sd and choose ext3 (or other) type file system I receive this error:
Mount script error
Mount script cannot be created.
mount: mounting/dev/block/void/179:2 on /data/sdext2 failed: Device or resource busy.
I have reformatted the SD and reinstalled the rom more times but the error persists...
Please, Doktornotor, can you help me to found the culprit?
try to partition your sd card via adb. idk why, but when i tried to partition via clockwork, i had sd-ext as read-only. u can check if link2sd is mounting ok in shell (comand: mount) and look for /dev/block/void/179:2 on /data/sdext2 line . also check if ext partition is ro or wr.
Thanks for the hints! After many tries formatting the sd by linux or windows I have reached a conclusion: my SD is faulty and I will retry tomorrow (I hope) with a new one. See you!
Hi! After many tries I've changed my choices, uninstalled link2sd, uninstalled the ROM, keeping my good old SD.
Installed CM 7.1-RC0 6.5.5 by Mik_os, installed DT a2sd, et voila all runs flawlessly... seems like a miracle!
I just created a 2nd partition on my 8GB SD card so that i could move apps to it using link2sd...but when i open link2sd and select the file system of my SD card's 2nd partition (ext4) i get an error:
Mount script cannot be created.
mount: No such device.
ext4 may not be supported on your device. Try FAT32 on the second partition.
Click to expand...
Click to collapse
Other small question : Do I really need to mount the 2nd partition if I just wanna install custom ROMs?
Need help ASAP! thanks in advance .
Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
ptcpayme said:
Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
I made the second partition as FAT 32 and it worked.
Now the only doubt i have is...will ROMS work on FAT32 partition?
kingcola said:
I made the second partition as FAT 32 and it worked.
Now the only doubt i have is...will ROMS work on FAT32 partition?
Click to expand...
Click to collapse
If you are on Stock then maybe FAT32 partition may have worked.. or even otherwise maybe it will work,.. haven't used a FAT32 sd partition since JaggyROM 2.x.x ( obviously my 1st partition is fat32 ) ... My second partition is an ext and it is advisable to have an ext partition cause there are many scripts like int2ext , s2e, etc which work well with an ext partition...
A partition is Not necessary to made in order for other ROMs to work.. They will work just as well without a partition .. only thing is your internal memory will remain to be 150 mb.. Which is the memory allocated in our phone's nand..
NOTE: Sense 4.0a is the only ROM that you necessarily need to have an SD-EXT Partition of at least 1 GB. Otherwise it won't boot.
thanks for helping me..
I partitioned (1GB of memory to fat32) my sdcard with MiniTool Partition Wizard to facilitate to link2sd long back. Now I am unable to recover that memory and merge into a single partition. Do you guys have solution for this?
delete the partition in disk mgmt..
kingcola said:
I just created a 2nd partition on my 8GB SD card so that i could move apps to it using link2sd...but when i open link2sd and select the file system of my SD card's 2nd partition (ext4) i get an error:
Other small question : Do I really need to mount the 2nd partition if I just wanna install custom ROMs?
Need help ASAP! thanks in advance .
Click to expand...
Click to collapse
If anyone still have the above issue then just change ur sdcard partition type to ext3. Reboot mobile. Better to use link2sd for this.
smartksr said:
I partitioned (1GB of memory to fat32) my sdcard with MiniTool Partition Wizard to facilitate to link2sd long back. Now I am unable to recover that memory and merge into a single partition. Do you guys have solution for this?
Click to expand...
Click to collapse
do it through mini partition tool..delete the created partition..now right click on the 1st partition..slect extend..n drag the cursor till end...n click apply...done
Use Other Kernel
The reason for your second partition is not recognized is you may be at Stock Rom and Stock kernel....
Stock kernel do not support ext partitions...
Use ateeq kernel or cranium kernel for ext4 partition support....
Also use Mounts2sd instead of link2sd...!!!!
I used mounts2sd after I created sd card partition(ext3) but this app said partition not mounted; but link2sd recognised n created scripts.
Sent from my GT-S5830i using xda app-developers app
RajeevBN said:
I used mounts2sd after I created sd card partition(ext3) but this app said partition not mounted; but link2sd recognised n created scripts.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Assuming you have the right kernel, install the startup script and change the driver in mounts2sd settings to ext3.
Sent from my Explorer A310e using XDA Premium 4 mobile app
Thanks mate!! Your ext3 suggestion worked perfectly for Link2SD on my droid.
BleedingIris said:
Make ext3 partitions
No need of second partition for cyanogen. You may need it for sense
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
Thanks mate!! Your ext3 suggestion worked perfectly for Link2SD on my droid. :good:
hey guys, is it possible to access the 2nd partition on Android or under Windows? Link2SD sees my 2nd partition and mounts it correctly, but assuming I want to copy e.g. music files to the 2nd partition using Root Explorer or using my PC, how do I do that? I tried both and they don't see my 2nd SD partition at all...
chaoscreater said:
hey guys, is it possible to access the 2nd partition on Android or under Windows? Link2SD sees my 2nd partition and mounts it correctly, but assuming I want to copy e.g. music files to the 2nd partition using Root Explorer or using my PC, how do I do that? I tried both and they don't see my 2nd SD partition at all...
Click to expand...
Click to collapse
Use EXt2FS search in google you will get it..
Install it in your windows.. reboot your pc.. Then connect your card.. You will get the second partiton to see plus you can copy paste as well..
THANKS jynt_panwar!!!!! I WAS LOKING FOR THIS FOR A YEAR!!!!!!!!!! The Link2sd don't work for my phone (ZTE Blade L3 stock rom 4.4.2), but the Mounts2sd saved my life!!! Also I followed the instructions in this site: INCREASE YOUR ANDROID INTERNAL MEMORY || BY MOUNTS2SD (BEST WAY) in androcustomroms site. Maybe it can help more people... And thanks XDA of course!
Hi Friends
Yesterday I flashed my HTC Explorer with CM10.1 Beta 5 ([DEV][ROM][JDQ39E][4.2.2] CyanogenMod 10.1.2 | BETA#5 | 25/07/13 | WILD FOR THE NIGHT) . But with this build my phone is not mounting the second partition of size 2GB (total 16gb card) which I have created from recovery menu. I have tried with the Mini partition tool on windows for FAT32 too, but still its not mounting my either Link2SD, mount2SD or by the kernel (About Phone -> System partion).
Please help me as without mounting the 2nd partition I can not install any other app as very very less space is available after CM 10.1.
Thank you.
Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition
thekoolanie said:
Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition
Click to expand...
Click to collapse
Its still not working. I wonder, if we can do so many things in CM, why can not we simply integrate the script in to the rom itself. I'm damn sure 100% of HTC explorer users must be searching for a way to increase the internal memory of the phone also now a days sd cards are damn cheap.
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
---------- Post added at 06:04 AM ---------- Previous post was at 05:55 AM ----------
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
mount2sd NOT mounted SD-EXT on Samsung Galaxy Y Pro Duos
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.
xda_keevvee said:
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.
Click to expand...
Click to collapse
remove any sd. ext you made..create new ext partition using recovery and try..
shubhojit89 said:
remove any sd. ext you made..create new ext partition using recovery and try..
Click to expand...
Click to collapse
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek
xda_keevvee said:
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek
Click to expand...
Click to collapse
ya u can post the screenshots..
vice ereafe
See enclosed. The log file is empty but check the debug
xda_keevvee said:
See enclosed. The log file is empty but check the debug
Click to expand...
Click to collapse
create partition through recovery and make it ext4 coz ext4 is mounted easily..
shubhojit89 said:
create partition through recovery and make it ext4 coz ext4 is mounted easily..
Click to expand...
Click to collapse
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...
xda_keevvee said:
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...
Click to expand...
Click to collapse
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..
shubhojit89 said:
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..
Click to expand...
Click to collapse
it was kernel thing (BTW - there are very few recovery binaries for this phone, CWM is for example mostly in use as a temporary executed, loaded each tip from ZIP).
I have updated kernel to this:
http://forum.xda-developers.com/showthread.php?t=1913349
and things automatically got mounted (even made a partition using my PC and working same good)
thanks for participation
Hi all...
Im having problem with Link2sd after resizing the second partition.
What I had done:
Before resizing the partition I copied all the files from ext partition to my desktop
I resized the partition to a smaller one, from 4.5 gb to 3.5.
The total filesize in this partition was under 2 gig.
Using minipartition tool I deleted the ext partition.
Resized my existing fat partition to 4 gb and created ext partition with rest of the space
Ext partition was created as primary.
Now I copied back all the files from desktop to sd card.
But everytime I start with my sdcard, Samsung logo keeps showing after boit sound.
I waited for 5 minutes but nothing happnd.
I started without sdcard. And tried recreating mount script.But the same problem.
How to overcome this problem. Do I need to start from the beginning? ?
My device Samsung Galaxy Fame 6812.
Running jb 4.1 Stock ROM definitely Rooted.
droidshan said:
Hi all...
Im having problem with Link2sd after resizing the second partition.
What I had done:
Before resizing the partition I copied all the files from ext partition to my desktop
I resized the partition to a smaller one, from 4.5 gb to 3.5.
The total filesize in this partition was under 2 gig.
Using minipartition tool I deleted the ext partition.
Resized my existing fat partition to 4 gb and created ext partition with rest of the space
Ext partition was created as primary.
Now I copied back all the files from desktop to sd card.
But everytime I start with my sdcard, Samsung logo keeps showing after boit sound.
I waited for 5 minutes but nothing happnd.
I started without sdcard. And tried recreating mount script.But the same problem.
How to overcome this problem. Do I need to start from the beginning? ?
Click to expand...
Click to collapse
Whats the phone you're talking about?
LS.xD said:
Whats the phone you're talking about?
Click to expand...
Click to collapse
Oopss. Im really sorry for not specifying device model..
My device Samsung Galaxy Fame 6812.
Running jb 4.1 Stock ROM definitely Rooted.
droidshan said:
Oopss. Im really sorry for not specifying device model..
My device Samsung Galaxy Fame 6812.
Running jb 4.1 Stock ROM definitely Rooted.
Click to expand...
Click to collapse
The operation to link storage to ext partition is scripted. Ext4 partition has to be formatted once after installing the script to work properly. Link2SD performs this when setting up. You can try formatting the SD-Ext partition using your custom recovery but i suppose you will have to set up the ext partition again usning Link2SD
LS.xD said:
The operation to link storage to ext partition is scripted. Ext4 partition has to be formatted once after installing the script to work properly. Link2SD performs this when setting up. You can try formatting the SD-Ext partition using your custom recovery but i suppose you will have to set up the ext partition again usning Link2SD
Click to expand...
Click to collapse
Yes, I copied the files back to ext partition after formatting the partition.
Do I need to start from the scratch?
Did you Format it using the custom recovery?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
No custom recovery, running with stock recovery. I had no problem when I first started link2sd with no apos linked.
I formatted the ext partition from mini partition tool
droidshan said:
No custom recovery, running with stock recovery. I had no problem when I first started link2sd with no apos linked.
I formatted the ext partition from mini partition tool
Click to expand...
Click to collapse
Seems as you need to set up the partition via Link2SD again
LS.xD said:
Seems as you need to set up the partition via Link2SD again
Click to expand...
Click to collapse
Yes!! I had cleaned up the second partition from linked2sd. And rebooted.
Phone boots normally with basic apps..
Now I tapped " relink all files " frm link2sd . And copied one apk file from my backup & rebooted
Bingo!!! That app linked 2 sd .. now copying rest of the apps..
Thanks for helping me..
hi guys.I got micromax a58. rooted.using framaroot. installed busy box , terminal emulater, root explorer and link2sd. I partitioned my 8gb memory card into 6.40gb fat32 primary and tried the second partition in all formats. ext2 ext3 ext4 and fat32. nothing worked. I set both to primary. then I learnt about manual mount script. also could not find install-recovery.sh. could not find it any where. please help me to in grease my internal memory. please please. thanks to every body who help me. at present my second partition is ext2. how to find install-recovery.sh? give me step by step guide. please.
naveen cj said:
hi guys.I got micromax a58. rooted.using framaroot. installed busy box , terminal emulater, root explorer and link2sd. I partitioned my 8gb memory card into 6.40gb fat32 primary and tried the second partition in all formats. ext2 ext3 ext4 and fat32. nothing worked. I set both to primary. then I learnt about manual mount script. also could not find install-recovery.sh. could not find it any where. please help me to in grease my internal memory. please please. thanks to every body who help me. at present my second partition is ext2. how to find install-recovery.sh? give me step by step guide. please.
Click to expand...
Click to collapse
there is always solution for most of ur problems.just search the forum.
here is the link for step by step tutorial including sdcard partitioning..
http://forum.xda-developers.com/showthread.php?t=2142844
I searched the whole day sir. unable to create mount script. unable to find instsll-recovery.sh. could you tell me if I can add that 1gb again to main 6.40gb.? if so please tell me. I at least go with app2sd. or please help me with link2sd. please sir. help me out. I am trusting on you people.
naveen cj said:
I searched the whole day sir. unable to create mount script. unable to find instsll-recovery.sh. could you tell me if I can add that 1gb again to main 6.40gb.? if so please tell me. I at least go with app2sd. or please help me with link2sd. please sir. help me out. I am trusting on you people.
Click to expand...
Click to collapse
does link2sd detects your second ext2 partition? if yes... pls wait for somebody else to help you.if it is not detected, just follow the steps carefully in the tutorial (link given in first reply).
this is what happened: when I click ext2 ext3 ext4 or fat32 it shows mount script cannot be created. when I see in storage info it says sdcard 2 no mount. intact I followed that guide to partition. 6.40gb primary fat32. and 1gb primary ext2 (at present) tried ext 3 4 and fat 32. every time it shows no mount script. do yo still say that my partition is wrong? please help me. also say where is install-recovery.sh located. if I find that it will be done. note: I use micromax a58
I hope you are using Andrr 4.2 and be sure that you are using latest link2sd app from playstore.I know that some older version of link2sd doesn't support 4.2 . will cause mount script error.
first of all... forget about script now... I cant help you with scripts..But im sure that you can do without a script. because I also faced the same situation that u r facing...
tried all filesystems allways shows me mount error..
but I started from the scratch slowly following each and every step carefully., I succeeded with ext2 filesystem. thats why I told you to follow that steps carefully. .
I dont have any link to tutorial for the scripts for you now..
ill post it here once I get it..
all the best
scratch means? you merged everything and again partitioned it? first I moved all data to system. and I partitioned it as I mentioned previously. total 7.40gb. after deleting all became unallocated. I split it into 2. one is primary, 6.40gb,fat32. another is primary, 1gb,ext2. installed link2sd. selected ext2.(also tried others). it said mount script not created.. also said to try fat32/16. I again inserted in computer. clicked the second partition. clicked delete partition (did I make mistake here?). and the second partition(ext2) became unallocated. didn't touch the first partition. after second became unallocated, I tried fat32. not worked. repeated the process for all.(ext3,ext4) nothing worked. mount script not created. that's why I entered into scripts and downloaded root explorer, busybox and terminal emulator. but couldn't find install-recovery.sh. this is my situation. have I made mistake in partition? help me sir. please.
naveen cj said:
scratch means? you merged everything and again partitioned it? first I moved all data to system. and I partitioned it as I mentioned previously. total 7.40gb. after deleting all became unallocated. I split it into 2. one is primary, 6.40gb,fat32. another is primary, 1gb,ext2. installed link2sd. selected ext2.(also tried others). it said mount script not created.. also said to try fat32/16. I again inserted in computer. clicked the second partition. clicked delete partition (did I make mistake here?).....
Click to expand...
Click to collapse
yes just start by deleting all partition..mini patrition tool is best for this purpose.
try to make ur fat partition as active.
both must be primary
after partitioning make sure your partition showing with size specified by you.you can use diskinfo app from playstore.
do a restart...
still if u cant .......
I saw some script details here...
http://forum.xda-developers.com/showthread.php?t=2142844&page=2
and
http://forum.xda-developers.com/showthread.php?t=1713478
be careful.. I dont hav any experience in creating these scripts...
in link2sd it says SD card 2nd part not mounted is my partitioning wrong? any way to find if my partition. .is correct? how to find whether my sdcard has ext2? note I have terminal emulator, root explorer,busy box and link2sd.
downloaded disk info. in SD card it shows mmcblk0p1 ( my main fat32 primary 6.40gb) and mmcblk0p2 ( my second ext 2 primary 1gb). mount point shows none. how to mount it? shall I merge my two partitions and again partition it? if so what should I give for second partition? ext2 or 3 or 4 or fat32? do I have to follow trial and error method? please help me sir.
naveen cj said:
downloaded disk info. in SD card it shows mmcblk0p1 ( my main fat32 primary 6.40gb) and mmcblk0p2 ( my second ext 2 primary 1gb). mount point shows none. how to mount it? shall I merge my two partitions and again partition it? .
Click to expand...
Click to collapse
yes,you can delete all partitions and start again.try to make your first partition as active. use mini partition tool to partition ur sdcard.for second partition
use ext2 filesystem it is supported by almost all roms .if you still stucked try with fat32.
thats all.. if u still not able to mount try those scripts (link already given) at ur own risk.
how to make first partition as active with mini tool partition? I have been using that tool from the beginning. I want to merge those partitions and split it again right?