Database Info

Htc Function Test Program

Found this on Modaco
I found this a while back, then wanted to use it today and had forgotten the codes
(I'm putting it here so I can find it again)
WARNING : Screwing around in these menus may brick your phone.
NOTE : This applies to GSM Hero phones only. I believe CDMA replaces *#*# with ## and #*#* with #
Hint - maybe someone might like to try this with the various radio versions to compare strengths?
HTC Phone Information Screens
Dialling *#*#4636#*#* provides the following :
Phone Information
- IMEI
- Phone number (if known)
- Current network
- Ping test
- Signal strength
- Location (signal latency & Cell ID)
- Neighbouring Cell IDs
- Roaming state
- GSM service status
- GPRS service status
- Current network type
- Message waiting status
- Call redirect status
- Call status
- Radio reset count
- Data attempt count ?
- Data success count ?
- GSM disconnect info log
- PPP sent count
- PPP receive count
- Number of PPP reset since boot count
- Preferred network type (selectable)
- Toggle ciphering (selectable)
- Toggle QXDM SD Log ? (selectable)
- Toggle radio on/off (selectable)
- Set/retrieve SMSC number (click Refresh to show current)
- Toggle DNS check
Pressing MENU will allow you to :
- Set your radio band manually
- View SIM address book
- View SIM fixed dialling numbers
- View SIM service dialling numbers
- Get PDP list (GPRS contexts IIRC)
- Disable data connection
- Disable data on boot
Battery Information (what you get in Spare Parts anyway)
Dialling *#*#3424#*#* provides the following :
HTC Function Test
- Test LED, Backlight, Vibrator, Display, Audio, SD card, Camera, Button, HST, Touch, System, Battery
Don't blame me if "SD Test" (or anything else in those menus) wipes your card/phone/dog......
EDIT (10/01/2010)
Using information from http://forum.xda-developers.com/showthread.php?t=540483 I've dumped all my .apk files and searched for the codes...I found nothing *new*, but the GTalk Service Monitor is valid...
*#*#8255#*#* -> Google Talk Service Monitor (Talk.apk)
This is rather more interesting, as it shows :
- Google Talk host address & port
- Your Google JID (presumably Jabber ID, as GTalk is based on Jabber IIRC)
- Your Device ID (this is interesting, and presumably hashed from something - will check across ROMs as I presume this MUST stay the same)
- GTalk connection status
- GTalk heartbeat status (presumably when it checks in to GTalk?)

how does this work if i dial that number i just get tmobile telling me calls to this number are bard ?

You've got an EVO working on Tmobile?!? You're not supposed to actually hit send or talk or whatever, just dial the numbers and the menu should pop up in a few seconds if it is enabled on your phone. Works on the EVO and also did on my Sprint Hero.

mccurt29 said:
Dialling *#*#3424#*#* provides the following :
HTC Function Test
- Test LED, Backlight, Vibrator, Display, Audio, SD card, Camera, Button, HST, Touch, System, Battery
Click to expand...
Click to collapse
This doesn't work on the Evo, or at least mine.

Negrito said:
This doesn't work on the Evo, or at least mine.
Click to expand...
Click to collapse
##3424# is ##DIAG# There are no options, but it does put your phone into diagnostics mode. This is useful if you install the diag drivers on your computer and use cdma workshop or something similar.
*#*#8255#*#* and ##8255# do nothing.
Some other codes below if you are interested:
danknee said:
You need your MSL # to get to the edit modes. Here are some EPST codes:
##your msl number#(##000000#)
##your otksl number#(##000000#)
##data# (##3282#)
##debug#(##33284#)
##diag#(##3424#)
##rtn#(##786#)
##prl#(##775#)
##prev#(##7738#)
##akey#(##2539#)
##vocoder# (##8626337#)
*#*#info*#*# (*#*#4636#*#*)
Click to expand...
Click to collapse

Captivate codes (Galaxy S)

Got this from another source.
Be careful what options you change.
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* for factory data reset
*#*#34971539#*#* for information about phone camera (be very careful hitting options here)
*#*#7594#*#* change the "Power" button action in your phone.
*#*#197328640#*#* service mode
*#197238640# service mode
*#0*# testing mode
*#06# view IMEI number
*#1234# display phones current firmware
*#*#1472365#*#* gps test

2.3 Gingerbread secret Codes

*#*#0*#*#* screen test menu
*#0011# network mode/cell info/power info hidden menu
*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* for factory data reset
*#*#34971539#*#* for information about phone camera (be very careful hitting options here)
*#*#7594#*#* change the "Power" button action in your phone.
*#*#197328640#*#* service mode
*#197238640# service mode
*#0*# testing mode
*#1234# display phones current firmware
*#*#1472365#*#* gps test (work on 2.2)
*#0011# network mode/cell info/power info
*#*#0*#*#* screen test menu
*#7465625# engineering mode
*#3214789650# gps service menu for JP3 fw
*#9900# Sysdump screen.. way to dump ram and other logs to sd card
*2767*3855# FACTORY DATA WIPE AND internal SD RESET as soon as you enter # use only if you want wipe your phone
*#*#273283*255*663282*#*#* Opens a File copy screen where you can backup your media files
these are all the codes i know so far, if anyone figures out any more,please add[/LEFT][/B]

If you want you can add this ones:
*#*#3214789650#*#* - GpsSetup2
*#7284# - UART and USB options
*#1234# - Version
*#06# - view IMEI number
*#*#4636#*#* - usage stats and device info
*#9090# - service mode UART and USB /slightly different form the 7284 one/
*#9900# - sysdump /if you dont know what it means, probably you won't need this one /
*#03# - NAND flash unique number
*2767*3855# - hard reset
*#*#7780#*#* - factory data reset
*#0*# - testing mode
*#*#4636#*#* - Usage stats and device ingo
*#0782# - Real Time Clock
*#0011# - GSM status
*#*#197328640#*#* - Servicemode, Debug, Netz, Audio, Common
*#7465625# - Engineering mode
*#2263# - Band selection
*#232337# - Bluetooth adress
*#*#232331#*#* - Bluetooth test
*#*#232338#*#* - WLAN-MAC address
*#*#2663#*#* - Touchscreen Firmwareversion
*#*#2664#*#* - Touchscreen test
*#*#0588#*#* - Proximity test
*#0842# - Vibrator test
*#0228# - Batery stats
*#0673# - Audiotestmenu
*#*#8255#*#* - Gtalk service monitor
*#*#7594#*#* - Powerbutton settings
*#07# - Test history
*#32489# - Ciphering info
*#0589# - Light sensor read
*#272886# - Enable/Disable auto answer
*#301279# - Switch 3G - HSPA

Wow
Thank you for all the above codes.
Unfortunately not all of them work on my Galaxy Note running Checkrom RevoHD V5.

thank u
Thank you for all the above codes.

Thank you!! i've been looking for this codes

nice find, thank you!

saving them...thanks man...

thanks a lot.

how do you find out these things?

Some of them don't work with my Neo but some are very useful for me, thanks man.

thanks for all those codes a big help for us

thank u for the codes. very useful.

Nice, definitely will be bookmarking this one.

Thanks man.
Unfortunately most of them does not work on my SE Live which is running Android 2.3.4. What could be the cause?

None of them work on my self compiled CM7.

is there anything like that for ics? thanks

Recovered My 3G connection!
I must give a HUGE thanks to ppl who discovered *#*#4636#*#* because with the options in this code, I was able to make my phone connect 3G again after flashing it.
But unfortunately, the most others didn't work for my Defy mini.

I was testing with my old cupcake and works a lot of then.

cool!
:laugh: great stuff!!! :laugh:

this is great, thanks!

(CODES-UPDATED) Android Secret Codes ! NEW 2014

HELLO EVERYONE @!
As pointed out from comments these are mostly for Samsung, I have added some for HTC below. Like I said this is just a start we can build form it. If anyone would like to create a Google Doc from this information please feel free I will add a link to this post.
SAMSUNG CODES
Code Description
*#*#4636#*#* Display information about Phone, Battery and Usage statistics
*#*#7780#*#* Restting your phone to factory state-Only deletes application data and applications
*2767*3855# It's a complete wiping of your mobile also it reinstalls the phones firmware
*#*#34971539#*#* Shows completes information about the camera
*#*#7594#*#* Changing the power button behavior-Enables direct poweroff once the code enabled
*#*#273283*255*663282*#*#* For a quick backup to all your media files
*#*#197328640#*#* Enabling test mode for service activity
*#*#232339#*#* OR *#*#526#*#* Wireless Lan Tests
*#*#232338#*#* Displays Wi-Fi Mac-address
*#*#1472365#*#* For a quick GPS test
*#*#1575#*#* A Different type GPS test
*#*#0283#*#* Packet Loopback test
*#*#0*#*#* LCD display test
*#*#0673#*#* OR *#*#0289#*#* Audio test
*#*#0842#*#* Vibration and Backlight test
*#*#2663#*#* Displays touch-screen version
*#*#2664#*#* Touch-Screen test
*#*#0588#*#* Proximity sensor test
*#*#3264#*#* Ram version
*#*#232331#*#* Bluetooth test
*#*#7262626#*#* Field test
*#*#232337#*# Displays bluetooth device address
*#*#8255#*#* For Google Talk service monitoring
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
*#*#1111#*#* FTA Software version
*#*#2222#*#* FTA Hardware verion
*#*#44336#*#* Displays Build time and change list number
*#06# Displsys IMEI number
*#*#8351#*#* Enables voice dialing logging mode
*#*#8350#*#* Disables voice dialing logging mode
##778 (+call) Brings up Epst menu
HTC CODES
Code Description
*#*#3424#*#* HTC function test Program.
*#*#4636#*#* HTC Info menu
*#*#8255#*#* launching GTalk Service Monitor
##3424# Diagnostic mode.
##3282# for EPST.
##8626337# for VOCODER
##33284# Field trial menu.
##786# Reverse Logistics Support.
##7738# Protocol Revision.
##775# Unknown
##2539# Unknown
One more hidden menu trick go to market download gesture (free app)
Open gesture press menu
Press settings
Enable (check) settings
Write the following in gesture: 4g
Also note writing: Sprint
And writing: settings
/u/norf9: For the s4 I found these codes:
Code Description
*#1234# to check software version of phone.
*#12580*369# to check software and hardware information.
*#0228# Battery status (ADC, RSSI reading)
*#0011# Service Menu
*#0283# loopback test
*#06# imei
*#03# nandflashheaderread
*#0808# usb service
*#9090# service mode
*#7284# FactoryKeystring
*#34971539# camera firmware standard
*#1111# servicemode
*#0*# Testmodus
if you have Verizon, you need to do this before you can use these: http://forum.xda-developers.com/showthread.php?t=2303905
Root required for this step. Some codes will work if you have Verizon and no root. Test at your own risk!
Didn't see a list of useful codes for Android, I found a list for iPhone though, please share any commands you may have that might be useful. I will update this list with anything posted in the comments.
(This was a copy and pasta from another site, but still useful information.)
WARNING: Use at your own risk, I have not tested all of these codes. I do not know if they will work on your device.
/u/AFinn: There is also an app called "Secret Codes" which will find other codes that are used by applications and not the OS itself. Some apps let you access secret settings with these codes.
These are not "Android" secret codes. These are "Samsung" secret codes. Except one of two none of them will work on any device other than a Samsung phone.
PRESS THANKS BUTTON !!!!!! !!

http://www.reddit.com/r/Android/comments/1sl0ep/list_of_android_secret_codes_tips_and_tricks/
Looks familiar?
Thread closed.

Sony Xperia Shortcut Codes

At your own risk:
"These codes are compatible with Sony Xperia Z, Xperia J, Xperia P, Xperia U, Xperia ION, Xperia S, Xperia E, Xperia L, Xperia tipo, Xperia arc, Xperia zola and any other model of sony xperia series.
Then dial the secret code *#*#7378423#*#*
After dialing the code you will get a screen with options of service info,service setting, service test, customization setting.
ANDROID secret codes
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
* Phone information
* Battery information
* Battery history
* Usage statistics
Code :-
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
* Google account settings stored in your phone
* System and application data and settings
* Downloaded applications
It'll NOT remove:
* Current system software and bundled applications
* SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
code:-
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
code:-
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
* Update camera firmware in image (Don't try this option)
* Update camera firmware in SD card
* Get camera firmware version
* Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
code:-
*#*#7594#*#*
This one is favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
code:-
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
code:-
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address MAC (Media Access Control), address is a globally unique identifier assigned to network devices, and therefore it is often referred to as hardware or physical address. MAC addresses are 6-byte (48-bits) in length, and are written in MM:MM:MM:SS:SS:SS format. The first 3-bytes are ID number of the manufacturer, which is assigned by an Internet standards body. The second 3-bytes are serial number assigned by the manufacturer.
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
GSM codes
Type the code and press send button.
Barring code: 0000
Check barring
Outgoing: *#33#
Incoming: *#35#
Cancel all: #330*BC# (BC=barring code)
Set out: *33*BC#
Cancel out: #33*BC#
Set in: *35*BC#
Cancel in: #35*BC#
Set out msg: *33*BC*16#
Cancel out msg: #33*BC#
Set in msg: *35*BC*16#
Cancel in msg: #35*BC#
Divert calls (N=number)
set all: **21*N#
check all: *#21#
Cancel all: ##21#
Smart menu
GP: *111#
Robi: *140#
Banglalink: *789#
Waiting
Set: *43#
Cancel:#43#
Check:*#43#
Restore PIN by PUK:
**04*PUK*PIN*PIN#
Restore PIN2 by PUK2:
**042*PUK2*PIN2*PIN2#
International Mobile Equipment Identity (IMEI):*#06#
Type code and press the green key!
Caller's ID: *#30#
My caller ID: *#31#
Answering number: *#76#
My ID on ans: *#77#
Type*#61# and press call - Check redirection status.
Cancel all redirections:##002# ;
*43# to activate call waiting, to deactivate#43#.
If your phone doesn't have incoming call barringand outgoing call barring, You can try this.
For outgoing call barring dial *33*barcode*# and pres OK.
To deactivate it dial #33#barcode*#.
On any phone on any network type in **43# to enable conference calls. You can make up to7 calls at once .
If you need to block SMS reception (if you are spammed by someone) just press this code: *35*xxxx*16#
xxxx is your Call Barring code (default is 0000).
To remove this barring type: #35*xxxx# .
If you want to hide/show your phone number when calling, putone of these codes below in front of the number that you are going to call. (*#30# / *#31# or*31# / #31# ) Works onsome networks.
Typing *0# or *nm# on the beginning of a txt message gives you detailed delivery report on some networks.. But turn off reports in message settings before.
When the sim card-pin blocked type **042*pin2 old*newpin2*newpin2* .
To hide Your number while texting (only 02 network n Nokia phone) go 2 the messages menu select create e-mail, it will ask for an e-mail adress, enter [email protected], enter a subject, write the msg than send. It will ask e-mail server number, enter the number of your friend and send!
When roaming, type*#111*# or *#111# to call home abroad."