Hey guys I'm a newbie here. I was just wondering if the G Pro 2 would work in Canada. I'm kind of confused because I've seen many sites and each site gives different different cellular frequencies and I'm not really sure if voice/data would work here. Just FYI, I'm with Fido which is under Rogers; 2G-3G and fake 4G = 850mhz/1900mhz. LTE/4G+ = 2100/2600. Thank you in advance!
http://forum.xda-developers.com/showthread.php?p=51452805
Sent from my G3,Note 3 or S4
Rogers and att use same frequencies.
force70 said:
http://forum.xda-developers.com/showthread.php?p=51452805
Sent from my G3,Note 3 or S4
Rogers and att use same frequencies.
Click to expand...
Click to collapse
I think this is something that you need to consult in the telecom carrier.
sugoisooshee said:
Hey guys I'm a newbie here. I was just wondering if the G Pro 2 would work in Canada. I'm kind of confused because I've seen many sites and each site gives different different cellular frequencies and I'm not really sure if voice/data would work here. Just FYI, I'm with Fido which is under Rogers; 2G-3G and fake 4G = 850mhz/1900mhz. LTE/4G+ = 2100/2600. Thank you in advance!
Click to expand...
Click to collapse
I am with Bell with f350s, I can only get 3G. I setup bell apn, and choose prefer lte in setting, still can only get 3g connection.
Update: While walking downtown Toronto, pickup the lte signal. So I can confirm it works for both lte and 3g network on Bell
Related
Hello everyone. I just got my Touch Pro 2 from Telus and got it sim-unlocked. I am using it with Rogers wireless. So far so good. Except that 3G does not work Oh well..
mmmhhh86 said:
Hello everyone. I just got my Touch Pro 2 from Telus and got it sim-unlocked. I am using it with Rogers wireless. So far so good. Except that 3G does not work Oh well..
Click to expand...
Click to collapse
Same thing with T-Mobile TP2 on AT&T network. Compare Rogers and Telus 3G bands. It might be different.
not to sound rude, but is the telus 3g (hspa) network even up yet?
slight22 said:
not to sound rude, but is the telus 3g (hspa) network even up yet?
Click to expand...
Click to collapse
lol yeah I think so. I think its called 1x or something like that. I'm not very familiar with the CDMA phones but they advertise that you can use the phone to surf 3G speeds on their network so I'm pretty sure they have 3G speeds.
Sorry, but i'm using TELUS and the HSPA network won't be up till next year and trust me, Telus speeds now are NOTHING close to 3G.
I'm not sure how they are advertising these 3G speeds but 1x is actually slower than what Telus is currently using which is EVDO.
slight22 said:
Sorry, but i'm using TELUS and the HSPA network won't be up till next year and trust me, Telus speeds now are NOTHING close to 3G.
I'm not sure how they are advertising these 3G speeds but 1x is actually slower than what Telus is currently using which is EVDO.
Click to expand...
Click to collapse
i dont think thats true at all. i get speeds of up to 2.8mg downlink and 500k up.
ive downloaded while tethering upwards up 300kb/s. you might be in an area with 1x coverage, and not EVDO. PLUS make sure the device you are using isnt just EVDO, it has to be EVDO REV A. (touch pro, diamond, touch pro 2, touch, etc). Hope you get better speeds. CHears
Telus EVDO is not slow. Unfortunately the HDPA network is not up yet but it should be online VERY soon as the Olympics are drawing close and this is the reason why Telus is upgrading the network before Feb. 2010 here in Vancouver.
keery458 said:
i dont think thats true at all. i get speeds of up to 2.8mg downlink and 500k up.
ive downloaded while tethering upwards up 300kb/s. you might be in an area with 1x coverage, and not EVDO. PLUS make sure the device you are using isnt just EVDO, it has to be EVDO REV A. (touch pro, diamond, touch pro 2, touch, etc). Hope you get better speeds. CHears
Click to expand...
Click to collapse
Where the heck are you located?? I'm using a TP2 with full EV signal and i'm getting 400-600k and that's in the downtown core. And from what telus tells me thats the best they can do till they put the HSPA network up. They said CDMA is only capable of 7-750k max, there is no getting over that. But i'd love to know how your getting 2.8 meg, because technically thats roughly 2100k faster than what telus says we can get.
And Jessie is right Telus has a goal to sell phones during the olympics and they plan to have the HSPA up by then.
Yup I'm pretty sure I saw Telus advertising their high speed somewhere
im using a physical sim-card thingy to allow other sim cards to work in my telus TP2, it works (since it does not give me the regular error and i can see the numbers in it), but how do I stop it from using CDMA and go on GSM only?
Guys
I'm hoping you can help us no CDMA users with this question.
Considering that the CDMA TP2 has both GSM and CDMA radios, can I pop in a GSM SIM CARD and enjoy full GSM coverage including use of Asia and European 3G bands?
leepriestenator said:
Guys
I'm hoping you can help us no CDMA users with this question.
Considering that the CDMA TP2 has both GSM and CDMA radios, can I pop in a GSM SIM CARD and enjoy full GSM coverage including use of Asia and European 3G bands?
Click to expand...
Click to collapse
Yes you can use it on GSM networks. If you want to use the phone on a SIM other that the company's provided sim you need to sim-unlock it. The 3G will work in Asia and Europe but not in North AMerica because the bands are different and the TP2 supports those of Asia and Europe only (the North American CDMA version).
julienrl said:
im using a physical sim-card thingy to allow other sim cards to work in my telus TP2, it works (since it does not give me the regular error and i can see the numbers in it), but how do I stop it from using CDMA and go on GSM only?
Click to expand...
Click to collapse
Go to Phone Settings and select the Network tab then select GSM only instead of Global or CDMA
mmmhhh86 said:
Yes you can use it on GSM networks. If you want to use the phone on a SIM other that the company's provided sim you need to sim-unlock it. The 3G will work in Asia and Europe but not in North AMerica because the bands are different and the TP2 supports those of Asia and Europe only (the North American CDMA version).
Click to expand...
Click to collapse
It is quadband gsm.... works on all continents.... provided it is unlocked or you are paying for global roaming.
hello guys, im going to purchase verizon tp2 cause they say it supports gsm and cheaper than the generic nonbranded version. tmobile's design i dislike. so as im going to use it only with gsm sim, i have such questions, are there any differences in use between gsm and vzw versions except i must select gsm mode? can i flash it with generic tp2 roms?
........
okay, seems to be cdma versions cant be flashed to gsm as it is another model id(rhod400 and rhod500)
so i have one more question, will i be able to use internet on vzw tp2 without any restrictions on its stock rom now, when hardspl have not been released yet?
Just to be sure I understand if I want to buy a TP2 in Canada...
The Telus version will not be able to use GSN (Fido/Rogers) 3G network because the 3G bands are not the same as the TP2 from the United-States and Europe?
If so, would this version of the TP2 work with Fido/Rogers GSM 3g ?
http://www.puremobile.ca/HTC/HTC-Touch-Pro2-Black-GSM-Phone/
surbringer said:
Just to be sure I understand if I want to buy a TP2 in Canada...
The Telus version will not be able to use GSN (Fido/Rogers) 3G network because the 3G bands are not the same as the TP2 from the United-States and Europe?
If so, would this version of the TP2 work with Fido/Rogers GSM 3g ?
http://www.puremobile.ca/HTC/HTC-Touch-Pro2-Black-GSM-Phone/
Click to expand...
Click to collapse
I dont think so. I dont think there's a PRO 2 that supports our North American 3G bands.. At least not yet.. For the question above. Yes it is GSM quadband but not 3G quadband. This is different. It is 3G dualband and supports those of Asia and Europe only. Unfortunately.
That's a good and clear answer! Thx !
No problem. I think when and if AT&T or some North American GSM carrier releases the TP2, then the 3G will definitely work here in NA. Otherwise the current versions only support Asia and Europe.
Another question, can we install a custom ROM on the worldphone telus Touch Pro 2 like the other GSM phones? (I dont think so but I found two opposite answers on this forum).
I like the Captivate better than the Vibrant. Will it allow me to use 3G on the T-Mobile network?
I believe you would only get edge on at&t.
Sent from my SAMSUNG-SGH-I897 using XDA App
Technically it's the same type of network...
no, only EDGE. They have different 3G bands.
T-Mobile = 1700 MHz
ATT = 850 and 1900 MHz
we can use captivate in china with unicom
I have a Captivate on Tmobile.
Can confirm it's only Edge
I always snicker when I see these threads. T-Mo GSM =/= AT&T GSM. Yes there are common frequencies that all GSM phones use, but each carrier always has their own 3G frequency. None are shared.
While yes there are different GSM bands and yes T-mobile uses different GSM bands than AT&T, mostly all phones are quadband GSM nowadays and thus support but AT&T and T-mobile's GSM network. Even US triband GSM phones still has both AT&T and T-mobile's bands.
3G is where is it different. Not all phones support both T-mobiles and AT&T's 3g bands. Very few actually do. The Samsung Vibrant (another Galaxy S phone) supports T-mobile's 3G bands and can be changed in the service mode to support AT&T's 3G as well.
The Captivate is not the same. The Captivate can only support AT&T's 3G network and not T-mobile's 3G network. It will work on T-mobile's EDGE network.
amtrakcn said:
Technically it's the same type of network...
Click to expand...
Click to collapse
No they have a different bands for 3g, just because they use Sim cards doesnt mean it can run 3g on both networks
opcow said:
I believe you would only get edge on at&t.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Your wrong, the captivate is AT&T so you can 3G with AT&T and only Edge with tmobile
I'm also using the captivate on T-Mobile but can confirm that it's only on edge.
same situation with the nexus one. cant interchange or you can only get Edge
niceties of 3G
Wrong thread. I apologise!
vette95 said:
I just bought a Motorola Cliq (MB200). In Dominican Republic there are only 2 companies with 3G service. Claro Codetel (850Mhz) and Orange Dominicana (900Mhz)
Claro Codetel sells the Motorola Cliq for 3G usage on their network, branded to them of course.
The Cliq I bought is T-Mobile branded.
Is there ANY known way to debrand and have access to the 850 band for 3G?
I ask this question because I saw how it can be done on the Motorola Defy with a service flash found here, so I believe it should also be possible with my Moto Cliq.
I would really appreciate any input on this subject.
Click to expand...
Click to collapse
Shouldn't you really be looking in those forums and not one for a Galaxy S phone?
Sorry, only did it because there were talks about other makes. I didn't realise it was a "Galaxy S Only" thread.
How do I delete my post?
I can get HSPDA over here in Malaysia.
Actually, both T-Mobile and AT&T phones work here. (2100Mhz 3G band)
vette95 said:
Sorry, only did it because there were talks about other makes. I didn't realise it was a "Galaxy S Only" thread.
How do I delete my post?
Click to expand...
Click to collapse
Only phone mentioned here was the Captivate. Which is what this fora is for.
Sent from my Captivate
Is EDGE service bad? the reason I ask is that I'm planning a trip from Nova Scotia to British Columbia, and going to be drive through the states. Cheaper Gas/Food/Lodging. you get the picture. I have a Captivate from Rogers which is unlocked and was thinking about getting a T-Mobile SIM card to use the Day Pass unlimited internet. However I don't understand what edge means and if this is a good thing or not. LOL
Thanks
Well at&t just bought t-mobile so maybe there will be a combining of signals?
studacris said:
Well at&t just bought t-mobile so maybe there will be a combining of signals?
Click to expand...
Click to collapse
They haven't bought, they are attempting to buy.
DOJ and FCC still have to approve it.
@OP
No, the Captivate was designed to only be supported for AT&T 3G. It does have the 2100 band, which T-Mobile 3G uses, but T-Mobile uses both 1700/2100 for upload/download, so if you don't have both, it locks you into 3G.
Anyone tried to flash a Phone with 1700 enabled?
Hi all, im very new to XDA & have no knowledge of bandwidths. I just recently bought a HTC Sensation (not sure what model, but it was from a local guy). Had it unlocked so i can use it with my ATT plan. every thing was working fine except i had no data & couldnt send/recieve MMS. When first turned on, there was no APN settings on the phone, so i applied the settings stated in the thread APN settings for unlocked Sensation on ATT by mekajt7 on 09/05/11. Now i have data & MMS is working fine execpt my data is only 2G??
If there's anyone out there with more extensive knowledge regarding this topic, or how to get my phone to pick up 3G?? pleeeeeese leave a reply.
ive spent hours online reading about the bandwidths & ive been getting mixed results.... some said yes, it should work & most said no.
I'm in need of some answers
thanks for reading
the only way an sensation can pick up att 3g signals is if you buy one from canada made for their bell carrier. other then that all you can get is edge. if you want 3g or even better, 4g and be in the usa, you need tmobile
thanks for the reply kpholmes. yea, that's the same thing ive been getting from reading online for 4 hours. do you or anyone else reading know the model number for T-Mo's version vs. Bell's version???
i know it's 710a or 710e. but which is which??
DMX804 said:
thanks for the reply kpholmes. yea, that's the same thing ive been getting from reading online for 4 hours. do you or anyone else reading know the model number for T-Mo's version vs. Bell's version???
i know it's 710a or 710e. but which is which??
Click to expand...
Click to collapse
The Z710a is the North American (NAM) version sold by Canadian carriers and it supports the 850/1900/2100 3G bands that AT&T uses.
The Z710e supports the European and T-Mobile 3G bands.
tpbklake said:
The Z710a is the North American (NAM) version sold by Canadian carriers and it supports the 850/1900/2100 3G bands that AT&T uses.
The Z710e supports the European and T-Mobile 3G bands.
Click to expand...
Click to collapse
so, T-Mo's is neither of these?? or is it the Z710e??
im just trying to get the model's correctly identified
thanks for the reply
T-mo is the same as european and asian version, it wont work with at&t 3G which is probably what you have. You need to get the canadian sensation from bell or virgin mobile model number z710a. If you look at settings>>about phone>>phone identity, the model number of your phone should be there. If it is z710e, then you are out of luck.
So the Canadian version can use 3G on AT&T? And 4G?
sjespers said:
So the Canadian version can use 3G on AT&T? And 4G?
Click to expand...
Click to collapse
Yes the Canadian version can use AT&T 3G and HSPA+ network.
Hi Guys,
So I got a new Razr HD from Verizon, and took it to Canada where I live. I travel a lot from the USA to Canada. The phone specs seem to indicate that it has all the bands necessary to support all the GSM and LTE bands as well as CDMA when in the states. I was able to easily get 3G/H+ service from Rogers in Canada by simply changing the Network Mode to GSM/UMTS instead of Global and then adding an APN for Rogers. However, I cannot get LTE service. The LTE choice seems to be bundled with CDMA LTE/CDMA but I don't think that matters, I think its just a radio choice. However, when selecting this, I get an error from the phone saying "No LTE networks could be found" and Do I want to switch to GSM?
This is sad because the phone would be excellent on LTE. Does anyone know how to get a Verizon branded phone to run on Rogers LTE?
If you have any ideas let me know, I will test them.
Thanks,
Blue
BluePlanetMan said:
Hi Guys,
So I got a new Razr HD from Verizon, and took it to Canada where I live. I travel a lot from the USA to Canada. The phone specs seem to indicate that it has all the bands necessary to support all the GSM and LTE bands as well as CDMA when in the states. I was able to easily get 3G/H+ service from Rogers in Canada by simply changing the Network Mode to GSM/UMTS instead of Global and then adding an APN for Rogers. However, I cannot get LTE service. The LTE choice seems to be bundled with CDMA LTE/CDMA but I don't think that matters, I think its just a radio choice. However, when selecting this, I get an error from the phone saying "No LTE networks could be found" and Do I want to switch to GSM?
This is sad because the phone would be excellent on LTE. Does anyone know how to get a Verizon branded phone to run on Rogers LTE?
If you have any ideas let me know, I will test them.
Thanks,
Blue
Click to expand...
Click to collapse
Short answer, you can't. Different LTE bands. Rogers is 4 and 17, Verizon is 1, 3, 5, 13, 25. No overlap, and no-one currently makes LTE hardware that supports ALL LTE bands.
EdwardN said:
Short answer, you can't. Different LTE bands. Rogers is 4 and 17, Verizon is 1, 3, 5, 13, 25. No overlap, and no-one currently makes LTE hardware that supports ALL LTE bands.
Click to expand...
Click to collapse
Just wanted to add to this... I tested my Samsung Galaxy S3, a generic version that I got from Amazon, works on AT&T in the USA on LTE and in ROGERS in Canada. Too bad the Verizon Droid does not support a similar global LTE band. Or does AT&T and Rogers simply have the same LTE bands???
BluePlanetMan said:
Just wanted to add to this... I tested my Samsung Galaxy S3, a generic version that I got from Amazon, works on AT&T in the USA on LTE and in ROGERS in Canada. Too bad the Verizon Droid does not support a similar global LTE band. Or does AT&T and Rogers simply have the same LTE bands???
Click to expand...
Click to collapse
Yes, AT&T and Rogers have maintained the same bands since they were partnered maybe 10 years ago. Fido is owned by Rogers, so it also uses the same, from GSM up to LTE.
Neither AT&T or Verizon use "global" LTE bands, because there aren't any. Almost every country/provider uses different bands. There's some crossover, but with LTE, buy a phone for the market you are in, because you probably couldn't afford the roaming rates abroad anyway.
Hey guys, I think I have a related question.. maybe you guys can help
I live in Toronto and Rogers is my wireless carrier. From my understanding, Rogers operates on band 4 (1700 / 2100 mhz) as well as 2600 Mhz.
I am thinking of gettnig the new DROID MAXX from Verizon. I have tried asking the Verizon / Motorola reps about whether the LTE would work in Canada but wasn't able to get a firm answer.
From the Motorola website, however, as well as from gsmarena.com, it looks like the DROID MAXX will have access to not only LTE 700mhz, but also at 1700 and 2100 mhz.
What are the chances that this phone will work on Rogers LTE?
Really hoping it could work out... let me know if you guys have any ideas..
I have a few questions about this model:
Anyone know if there is a Global ROM in the works or can I put the normal Mi Mix 3 Global Rom on this model?
Anyone know what settings I need to set to allow this phone on to ATT's LTE network? I attempt to use the APN ATT Nextgenphone but it will not connect to that one. I have to use the Att Phone which it will connect but still it will not let me get anything above 3G speeds.
Any help would be greatly appreciated!
Thanks
LTE/Carrier
Before I purchased this phone, I checked all the sites for compatibility and what bands/frequencies AT&T uses for their LTE/4G networks. All of the sites stated that the Forbidden City model has all the bands needed to work with the carrier. Does anyone know how to get the phone to work with the LTE bands or what carrier in the USA will the phone work with the best?
Any help would be much appreciated!
walkrye said:
Before I purchased this phone, I checked all the sites for compatibility and what bands/frequencies AT&T uses for their LTE/4G networks. All of the sites stated that the Forbidden City model has all the bands needed to work with the carrier. Does anyone know how to get the phone to work with the LTE bands or what carrier in the USA will the phone work with the best?
Any help would be much appreciated!
Click to expand...
Click to collapse
it's got best all around LTE band coverage for AT&T in my area. Verizon isn't bad, just expensive. T-Mobile supports all the bands in my area but the quality sucks in my opinion. Sprint is obviously garbage especially for unlocked international phones.