Does anyone know of a good desktop dock that will work with the S5?
I have the Samsung dock that worked great with my S3 and S4 but the stupid USB port cover on the S5 gets in the way.
ITNV said:
Does anyone know of a good desktop dock that will work with the S5?
I have the Samsung dock that worked great with my S3 and S4 but the stupid USB port cover on the S5 gets in the way.
Click to expand...
Click to collapse
I'm using this: http://www.ebay.ca/itm/331131359015?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
You can set the S5 on it and it will charge and be firmly in place because the charging pin is very high, but obvisouly, the charging port cover has to be flipped 180 degrees and i'm scared that i the long term it will break off. Thats why i switched back to just a regular cable
polish_pat said:
I'm using this: http://www.ebay.ca/itm/331131359015?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
You can set the S5 on it and it will charge and be firmly in place because the charging pin is very high, but obvisouly, the charging port cover has to be flipped 180 degrees and i'm scared that i the long term it will break off. Thats why i switched back to just a regular cable
Click to expand...
Click to collapse
Yeah, the connector for that charger cover doesn't strike me as super durable.
I guess I could take a dremmel to the part of the dock on the left side of the charging pin and make some room for the port cover. It won't look great but at least I could probably have a workable dock and not be worrying about breaking that cover off.
Thanks!
ITNV said:
Yeah, the connector for that charger cover doesn't strike me as super durable.
I guess I could take a dremmel to the part of the dock on the left side of the charging pin and make some room for the port cover. It won't look great but at least I could probably have a workable dock and not be worrying about breaking that cover off.
Thanks!
Click to expand...
Click to collapse
If you're the type of person that thinks paying 50$ for a dock that is made for 1$, just because it's branded, is the way to go, then sure. But I had this since august and it's as solid as day 1, for under 10$, you can't go wrong. Heck, you can even buy 2 and experiment with a dremel if you want at that price
polish_pat said:
If you're the type of person that thinks paying 50$ for a dock that is made for 1$, just because it's branded, is the way to go, then sure. But I had this since august and it's as solid as day 1, for under 10$, you can't go wrong. Heck, you can even buy 2 and experiment with a dremel if you want at that price
Click to expand...
Click to collapse
Sorry, I meant the charging cover on the phone isn't durable. That dock locks plenty solid. I was just thinking that I'd have to cut it up a little to alleviate the stress on the USB port cover.
Ahh, i see. I agree on one side, but on the other, i can't believe Samsung have not opened and closed that little cover thousands of times before slapping it on the S5. Samsung have good stress tests that tend to make our phones very durable. It would be a major screw up to put a fragile door on a phone that depends on that for its IP67 certification. Only time will tell, but I think i'll take out the dremel too and try to make the dock as S5 friendly as possible:fingers-crossed:
polish_pat said:
Ahh, i see. I agree on one side, but on the other, i can't believe Samsung have not opened and closed that little cover thousands of times before slapping it on the S5. Samsung have good stress tests that tend to make our phones very durable. It would be a major screw up to put a fragile door on a phone that depends on that for its IP67 certification. Only time will tell, but I think i'll take out the dremel too and try to make the dock as S5 friendly as possible:fingers-crossed:
Click to expand...
Click to collapse
Yeah, I thought about that too -- the door doesn't look too durable but then I thought that it had to have been a requirement of the IP67 certification for it to be relatively sturdy. I owned the XPeria Z1 and the S5's door seems about as durable. Time will tell, I guess.
I'm kind of annoyed that they didn't consider charging pins, that would have opened up charging $50 for a new branded dock.
I'm going to source a replacement back and wire up the induction charge points to pads on the back, then build a dock for it.
It's kind of silly requiring you to open the usb protector every night to charge it. (And I hate wasting power on induction charging)
Sent from my SM-G900I using Tapatalk
themers said:
I bought this, http://dx-box.com/dual-battery-charger-dock-cradle-holder-for-samsung-galaxy-s5.html
Click to expand...
Click to collapse
So how is it working? The cable seems to be pretty short....
themers said:
I bought this, http://dx-box.com/dual-battery-charger-dock-cradle-holder-for-samsung-galaxy-s5.html
Click to expand...
Click to collapse
Would love to hear how its working as I have been looking for a dock that will also charge a spare battery. Do you have any issues with the usb cover? Work with a case? The usb cord is very short, are you using a different one?
Thanks for posting this.
mortymouse said:
Would love to hear how its working as I have been looking for a dock that will also charge a spare battery. Do you have any issues with the usb cover? Work with a case? The usb cord is very short, are you using a different one?
Thanks for posting this.
Click to expand...
Click to collapse
Someone needs to make a q wireless charging standing desktop dock.
Here's another dock. And I have yet to figure out how they are putting an S5 into a dock without ripping the USB cover off the phone first. That cover does NOT bend back enough for the phone to sit flush. So wth?!?!
http://www.mobilefun.com/44349-samsung-galaxy-s5-desktop-charging-cradle.htm
Here's another that makes it look like the cover bends back 90 degrees.
http://www.amazon.com/MobilePioneer...=merchant-items&ie=UTF8&qid=1397694596&sr=1-6
initial_k said:
Someone needs to make a q wireless charging standing desktop dock.
Click to expand...
Click to collapse
They have its called a Nokia DT-910....
I like the Ppyple Swivel Charge
I have had this one for a while and I like the fact that the plug for this is just the end of a usb cable locked into place. I have been able to reverse it when I had a phone that docked backwards and now I have put to USB3 cable that came with the phone right into it so I get the best it can do.
http://www.amazon.com/Ppyple-Swivel...e=UTF8&qid=1397776785&sr=1-10&keywords=ppyple
---------- Post added at 04:33 PM ---------- Previous post was at 04:24 PM ----------
initial_k said:
Someone needs to make a q wireless charging standing desktop dock.
Click to expand...
Click to collapse
this one is reasonably priced.
http://www.amazon.com/PThink-Qi-Ena...=1397777513&sr=1-1&keywords=qi+charging+stand
seeing the picture with the flap folded back, it seems like it would be a fight every time, and no chance of that flap folding that way with a case on, it would then point down ??
loved my s3 on a dock at my desk, time and weather.
Related
Having seen some super creative members do some amazing stuff to make one-off accessories I thought we could start a thread to share ideas on making a magnetic Qi car dock for the N4. Too bad the Palm Touchstone isn't comparable because you can get them cheap to disassemble and work to mod. I am thinking of doing so with a Nexus Orb or whatever LG calls it when it is released. These other pad type chargers would need magnets incorporated. Then there is the power supply to figure out.
If there is an existing option, please share. If you have a plan, help us brainstorm it and share it.
N4 shipped today. Can't wait
lpasq said:
Having seen some super creative members do some amazing stuff to make one-off accessories I thought we could start a thread to share ideas on making a magnetic Qi car dock for the N4. Too bad the Palm Touchstone isn't comparable because you can get them cheap to disassemble and work to mod. I am thinking of doing so with a Nexus Orb or whatever LG calls it when it is released. These other pad type chargers would need magnets incorporated. Then there is the power supply to figure out.
If there is an existing option, please share. If you have a plan, help us brainstorm it and share it.
N4 shipped today. Can't wait
Click to expand...
Click to collapse
Yeah, its what i thought when they annouced the orb thing. I would love a charger that is like the orb, that i can just chuck my phone onto, no hassle, and the magnets just stick too it, and it charges.
Can't wait for this!
The roads I usually drive are a little bumpy, and having a SRA doesn't help with that, so I don't think I'd be comfortable putting my phone's fate in the hands of a couple of magnets.
Here is something I did a few years back with a Palm Pre & their Touchstone charger. http://forums.webosnation.com/webos...-mounting-charger-car-solution-its-alive.html
If the Orb is light enough, I bet the same could be done.
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
The orb might work if its in a center console tray where the phone is more so leaning against the orb rather than having the orb fulling support the weight of the phone.
This goes counter what most people want and expect out of a car dock though, its more like a car stand
I'd be more inclined to do it this way as a DIY solution as well since we won't known till we try it out sturdy it will be... And sliding down onto a rubber center tray wont do much in terms of harm to the phone
Sent from my Nexus 7 using Tapatalk 2
xAshxMoneyx said:
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
Click to expand...
Click to collapse
There are some advantages to using a Touchstone (or Wireless Orb)-like solution. Mats usually don't have magnets, and you need to align the thing, besides in a car it will move. So that's done. Also you can tilt the thing and use it with a car dock mount. I have a pretty cool one . The suction cup is big and a special sticky material that you can actually stick to the dashboard and it's extremely secure. I have had another Arkon mount and they don't disappoint with quality. They offer a lot of different design selections for mounts and docks (mix and match). I found the dock I bought the least intrusive/ugly (including other brands). But the mount is really amazing.
So I plan to do what the OP is planning. Only that I suspect the Wireless Orb will be too expensive, and so far for me all the other available Qi chargers are still very expensive, even compared to Powermat. So I'm waiting to see what comes out and if the prices go down.
jnewman1991 said:
The roads I usually drive are a little bumpy, and having a SRA doesn't help with that, so I don't think I'd be comfortable putting my phone's fate in the hands of a couple of magnets.
Click to expand...
Click to collapse
take a rubber band and tie it to the orb.
peestandingup said:
Here is something I did a few years back with a Palm Pre & their Touchstone charger. http://forums.webosnation.com/webos...-mounting-charger-car-solution-its-alive.html
If the Orb is light enough, I bet the same could be done.
Click to expand...
Click to collapse
dude. while driving today i imagined using my spare brodit clip like you did to somehow mount an "orb". how did you adress the the power conversion to 12v or did the touchstone have a car power adapter?
xAshxMoneyx said:
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
Click to expand...
Click to collapse
i have an lg mat coming to check it out. yeah the power supply question is one i hope someone with an electrical understanding can enlighten us on.
andy o said:
There are some advantages to using a Touchstone (or Wireless Orb)-like solution. Mats usually don't have magnets, and you need to align the thing, besides in a car it will move. So that's done. Also you can tilt the thing and use it with a car dock mount. I have a pretty cool one . The suction cup is big and a special sticky material that you can actually stick to the dashboard and it's extremely secure. I have had another Arkon mount and they don't disappoint with quality. They offer a lot of different design selections for mounts and docks (mix and match). I found the dock I bought the least intrusive/ugly (including other brands). But the mount is really amazing.
So I plan to do what the OP is planning. Only that I suspect the Wireless Orb will be too expensive, and so far for me all the other available Qi chargers are still very expensive, even compared to Powermat. So I'm waiting to see what comes out and if the prices go down.
Click to expand...
Click to collapse
akron and brodit too have been my go-to solutions when oem car docks don't cut it.
I think this is a great idea and would love to have a wireless charger for my car. I was thinking of finding a way of modding one of these
Shady Gambino said:
Arkon Galaxy Nexus Dash mount
Click to expand...
Click to collapse
to allow wireless charging and NFC to turn on Bluetooth and GPS, open GMusic and turning off WiFi. Don't know how easy it would be though.
Also, if you can only find mains powered chargers you could always check out something like this.
Lastly, multi-quote might be good for replying to multiple posts
lpasq said:
i have an lg mat coming to check it out. yeah the power supply question is one i hope someone with an electrical understanding can enlighten us on.
Click to expand...
Click to collapse
EE here, well CE but its the same major at Purdue minus 2 classes. Okay when it comes to the wireless charging inductance Faradays law blah blah.. No one cares about that not even me really haha.
What you want to know is will it work in your car with a car charger, there is always a way whether it be running an inverter right off of the battery or from the Aux power source.
One factor is unknown right now, or at least I haven't looked enough.. What is the amperage draw of the charging station. Most phones charge off of 5V at 1 amp. Tablets usually 5V 2.1A and so on besides Sony Tablet S...
What I'm getting at is most chargers then charge at these voltages so if the orb needs 12V, 120V w.e. it may be anything other than 5V an inverter will have to be run, with the original AC adapter. Unless you can find a charger that charges at the correct voltages the original AC adapter plugged into the invertor will be your best idea for now.
Now onto the car mount idea, I also had one for my pre and my current touchstone modded Nexus ..
I am thinking of buying an energizer Qi station and finding a way to mount at an angle with some sort of lip on the bottom to stop a slide off, but may look terrible have to see and energizer station in person first..
I don't really care to mount my phone to use as a GPS or anything like that. That being said I will probably make some sort of holder thing to put in my cup holder to charge the phone when I am in my car. So now dumb question; the phone being in a vertical position should not affect the qi charging as long as it is close enough right? Once I have my phone and get around to it I will post pictures of it. I might be a few weeks though, got backordered.
cchap07 said:
I don't really care to mount my phone to use as a GPS or anything like that. That being said I will probably make some sort of holder thing to put in my cup holder to charge the phone when I am in my car. So now dumb question; the phone being in a vertical position should not affect the qi charging as long as it is close enough right? Once I have my phone and get around to it I will post pictures of it. I might be a few weeks though, got backordered.
Click to expand...
Click to collapse
from looking at this http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1 and already having a qi pad it seems the wireless charging contact area is rather centered.
lpasq said:
from looking at this http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1 and already having a qi pad it seems the wireless charging contact area is rather centered.
Click to expand...
Click to collapse
So you have a Qi charger already? My question is how good is the magnetic pull with it? Also which one do you have? I want to try and mount the charger to my wall like I had my touchstone for my GN... But that had a good magnetic pull due to the touchstone and rare earth magnets
runningwarrior08 said:
So you have a Qi charger already? My question is how good is the magnetic pull with it? Also which one do you have? I want to try and mount the charger to my wall like I had my touchstone for my GN... But that had a good magnetic pull due to the touchstone and rare earth magnets
Click to expand...
Click to collapse
i have these and neither have magnetic pull as you'd need: http://forum.xda-developers.com/showthread.php?t=1962570&page=31
lpasq said:
i have these and neither have magnetic pull as you'd need: http://forum.xda-developers.com/showthread.php?t=1962570&page=31
Click to expand...
Click to collapse
Hey if you have the time could you take a ruler to your lg pad? I I want to know the dimensions to see if my idea could even work with it. Unfortunately I was not able to find those dimensions anywhere online :/
cchap07 said:
Hey if you have the time could you take a ruler to your lg pad? I I want to know the dimensions to see if my idea could even work with it. Unfortunately I was not able to find those dimensions anywhere online :/
Click to expand...
Click to collapse
i will but i am away from it until later
Just ordered a Rearth case from here: http://goo.gl/V5ccu
Curious if anyone has this case (or a similar type that does not obstruct the top/bottom) and uses a microUSB desktop charger?
I know, I know, this phone supports wireless charging.... but some of us want to 1) charge as fast as possible and 2) have our phone upright on our desk while charging.
I heard that the N4 fits in the GSIII desktop chargers but I doubt they do with any type of case on. Anyone have recommendations for a "universal" or otherwise desktop charger that will work with this phone/case combo?
I have found one that looks to be promising, except it's Philips brand and is an alarm clock... but still, people are saying it's fairly universal and at least one of the reviews says they are using it with an otterbox case on their phone:
http://goo.gl/4g4jd
Any thoughts or recommendations for other ones that might work?
174 views and not a single comment? Am I the only one who still uses a desktop dock for their phone? lol.
rossbeck said:
174 views and not a single comment? Am I the only one who still uses a desktop dock for their phone? lol.
Click to expand...
Click to collapse
I'm afraid so... Although I'm pretty sure that you can find a universal Micro USB dock. I'd check Amazon or eBay.
I'm in the same boat; I'd love to get a desktop charger, but can't find anything. I picked up a cheap ($5) S3 dock on eBay, but the plug doesn't extend far enough to connect to my N4 and the base isn't wide enough to fully support it either. I came across this one, but it is fairly pricey and I'm not sure I want to be the first person to try it out...
GrendelJapan said:
I'm in the same boat; I'd love to get a desktop charger, but can't find anything. I picked up a cheap ($5) S3 dock on eBay, but the plug doesn't extend far enough to connect to my N4 and the base isn't wide enough to fully support it either. I came across this one, but it is fairly pricey and I'm not sure I want to be the first person to try it out...
Click to expand...
Click to collapse
I am in the same boat , I would like to get a couple of docks one for work desk and one for home desk, I have tried to buy that one but for some reason they don't ship from Australia to me in Canada, I have found it here in ebay http://www.ebay.ca/itm/KiDiGi-Unive...ries&hash=item337e43a54e&_uhb=1#ht_5273wt_775
I am concerned with stress on the USB port, other than that I would love to buy it, does anyone know if it can cause stress on the USB or or should it be OK ?
I'm tempted by the KiDiGi one. I have a similar one for my S2 and it's been working fine for me so far...unfortunately its for the S2 only and so won't work with anything else.
I have this model for my iphone and it worked very well with a case.
http://www.amazon.com/Konnet-KN-832...UTF8&qid=1355257145&sr=8-1&keywords=icrado+s3
The Galaxy S3, et. al. version should have the jack facing the correct way and work perfectly for the Nexus 4.
As an aside, I did have to modify my dock for my iphone with case, because the little jack holder they have on this dock is enveloped in a larger plastic covering to keep it attached to the dock. I simply sawed off the top portion that keeps it in place, and superglued.. it has been solid ever since, and the connector reaches all the way into my case to connect just fine.
i'm probably going to get one of these for my
delrazor said:
I have this model for my iphone and it worked very well with a case.
http://www.amazon.com/Konnet-KN-832...UTF8&qid=1355257145&sr=8-1&keywords=icrado+s3
The Galaxy S3, et. al. version should have the jack facing the correct way and work perfectly for the Nexus 4.
As an aside, I did have to modify my dock for my iphone with case, because the little jack holder they have on this dock is enveloped in a larger plastic covering to keep it attached to the dock. I simply sawed off the top portion that keeps it in place, and superglued.. it has been solid ever since, and the connector reaches all the way into my case to connect just fine.
i'm probably going to get one of these for my
Click to expand...
Click to collapse
Awesome, that one looks pretty good.... I think I'll give it a whirl. I bit the bullet and ordered a Panasonic wireless charger from Japan for home/bedside use... but a dock like this should work great @ work. Thanks!
why not get a wireless charging pad and not worry about it?
glenroebuck said:
why not get a wireless charging pad and not worry about it?
Click to expand...
Click to collapse
From my OP:
"I know, I know, this phone supports wireless charging.... but some of us want to 1) charge as fast as possible and 2) have our phone upright on our desk while charging."
That's why. It's not just about charging... I like to use my phone as a clock/info station during the day, and having it upright allows me to do that. Now if they'd just make a vertical magnetic charging pad.....
I use the phillips fidelio as351 and it fits my phone with it's multitude of cases and even my N7. also makes for a portable speaker systsem as well as it runs on battery or AC adapter. Lot of places have this dock on clearance.
Seidio also makes one that works with cases.
http://www.seidioonline.com/samsung-galaxy-s-iii-desktop-charging-cradle-p/bd2-crdssx1.htm
The Seidio one looks cool...but the lack of a backing looks like its going to put a lot of pressure on the USB connector.
I was looking at wireless mats, but then if I decide to change my handset again next year I'll be back in the same position I am now.
I like this price trend.
http://www.amazon.com/Wireless-Powe...F8&qid=1376272511&sr=8-50&keywords=qi+charger
Update - Mini product review
OK, I took one for the team and ordered this August 11. It arrived August 22. Estimated delivery was September 5.
First impressions:
Seems OK. After all, it is just a plastic housing with a coil and control/driver IC inside. Well packaged for mailing. Arrived via USPS. Nothing loose or rattling. Only content was the pad and an adapter cable. No power transformer. I plugged it into a 2 amp source. The blue power led lit up immediately. Placed the phone on the pad, phone indicated charging. No sound. No beep. Phone was likewise quiet. Running CM2. Position is of course kind of touchy. Best for me was when the top of the phone was aligned with the top of the charger. Easy to remember. After about 5 minutes, phone is definitely charging. No concept yet on charge rate/times.
Surface is slick. On any slant the phone will want to slip off. Temp fix was to stretch a beefy rubber band around the charger to act as a "stop". Proper fix (for me - YMMV) will be those little plastic bumpers used on the back of cabinet doors. Only other thing to do is a bit of black plastic spray paint from the basement.
Time will tell if it is reliable. But it was reasonably priced, delivered quicker than promised, and worked out of the box.
jherbold said:
I like this price trend.
http://www.amazon.com/Wireless-Powe...F8&qid=1376272511&sr=8-50&keywords=qi+charger
Click to expand...
Click to collapse
They are 10$ on ebay...
http://www.ebay.ca/itm/Wireless-Qi-...e_PDA_Chargers&var&hash=item3f27769aff&_uhb=1
http://www.ebay.ca/itm/qi-Wireless-...e_PDA_Chargers&var&hash=item51abef6de9&_uhb=1
Looks like the low end devices are bringing aggressive pricing to market. The name brands are sure to find a way to get their prices in better alignment.
Superpopsss said:
They are 10$ on ebay...
http://www.ebay.ca/itm/Wireless-Qi-...e_PDA_Chargers&var&hash=item3f27769aff&_uhb=1
http://www.ebay.ca/itm/qi-Wireless-...e_PDA_Chargers&var&hash=item51abef6de9&_uhb=1
Click to expand...
Click to collapse
Actually, no they aren't $10 yet! Those auctions have multiple options, $10 is for a receiver only. Charging pads are still $25-$27.
jherbold said:
I like this price trend.
http://www.amazon.com/Wireless-Powe...F8&qid=1376272511&sr=8-50&keywords=qi+charger
Click to expand...
Click to collapse
Has anyone tried this?
yahoowizard said:
Has anyone tried this?
Click to expand...
Click to collapse
yes, i found it quite good, i would recommend one for an office job, just place it on top
the charger will beep then the phone to for successful connection, you can feel the magnet pull it gently, two lights for connections
i found out it stop charging a few times must be when i moved it or it would be a bit fidgety with how i placed it, move it 20cm away and try again till i get the beeps
my nexus charger was squealing with it was connected, i charge by my bed.
will buy another soon and open it and make a better mould for my phone.
kwarwick said:
Actually, no they aren't $10 yet! Those auctions have multiple options, $10 is for a receiver only. Charging pads are still $25-$27.
Click to expand...
Click to collapse
what exactly does "receiver" mean? is it just the PCB inside the pad so you get it raw?
inspire1989 said:
what exactly does "receiver" mean? is it just the PCB inside the pad so you get it raw?
Click to expand...
Click to collapse
I believe receiver is for phones that aren't qi enables, you can add it to your phone so that it can work with a wireless charger.. it adds the induction to the battery of your phone i think. Useless for us cause ours is built in.
vikramkhalsa said:
I believe receiver is for phones that aren't qi enables, you can add it to your phone so that it can work with a wireless charger.. it adds the induction to the battery of your phone i think. Useless for us cause ours is built in.
Click to expand...
Click to collapse
ah thanks!
republicano said:
yes, i found it quite good, i would recommend one for an office job, just place it on top
the charger will beep then the phone to for successful connection, you can feel the magnet pull it gently, two lights for connections
i found out it stop charging a few times must be when i moved it or it would be a bit fidgety with how i placed it, move it 20cm away and try again till i get the beeps
my nexus charger was squealing with it was connected, i charge by my bed.
will buy another soon and open it and make a better mould for my phone.
Click to expand...
Click to collapse
Does it let you mute the beep?
Thanks
you can delete the one on the phone but there is no option to mute it on the charger, maybe if you opened it and disable the speaker
, indicator light on the phone would be better.
Can someone explained this message please?
2. Charging Pad Only, the receiver is not included here.(Such as Samsung Galaxy S3 / S4 / Note II, buyer need buy another wireless charging receiver.)
Is there another accessory needed to charge a phone/tablet or it just means you should first own e QI charging phone? Is this the "receiver"?
edit: I am with Nexus 4, does it have the receiver out of the box?
Thanks.
Nexus 4 has the "receiver" built in. It's an induction loop - a wire coil "tuned" to the Qi standard so it matches the coil in the charging pad so current can be induced in the receiving coil, providing power to charge the phone. For some phones (including those Samsung ones mentioned, but also iphones & most others) that don't have inbuilt receivers you can get cases with receivers inside.
Tl;dr? Got n4? Only need a Qi charging pad
Sent from my Nexus 4 using Tapatalk 4
Thank you mate. I think of ordering one. Let's hope it lasts and works flawlessly.
See mini product review added to original post.
jherbold said:
See mini product review added to original post.
Click to expand...
Click to collapse
I ordered 1 on aug 13 so mine should arrive soon. Thanks for letting us know its ok. A pic would also be nice
Pic - it looks EXACTLY like the pic on Amazon. The dimensions of the plastic housing are 6 x 3.3 x .35 inches.
One thing I did notice last night. I had it on the nightstand and the blue flashing LED is very bright in a dark room. I covered it with a sheet of paper. Hopefully when I spray paint it black that will be less of a problem. It's rainy here today so I may wait till later on to do that.
I hid the charging pad behind one of those acrylic picture frames. Works fine from behind it. Excuse the crappy old phone pics.
jherbold said:
I like this price trend.
http://www.amazon.com/Wireless-Powe...F8&qid=1376272511&sr=8-50&keywords=qi+charger
Update - Mini product review
OK, I took one for the team and ordered this August 11. It arrived August 22. Estimated delivery was September 5.
First impressions:
Seems OK. After all, it is just a plastic housing with a coil and control/driver IC inside. Well packaged for mailing. Arrived via USPS. Nothing loose or rattling. Only content was the pad and an adapter cable. No power transformer. I plugged it into a 2 amp source. The blue power led lit up immediately. Placed the phone on the pad, phone indicated charging. No sound. No beep. Phone was likewise quiet. Running CM2. Position is of course kind of touchy. Best for me was when the top of the phone was aligned with the top of the charger. Easy to remember. After about 5 minutes, phone is definitely charging. No concept yet on charge rate/times.
Surface is slick. On any slant the phone will want to slip off. Temp fix was to stretch a beefy rubber band around the charger to act as a "stop". Proper fix (for me - YMMV) will be those little plastic bumpers used on the back of cabinet doors. Only other thing to do is a bit of black plastic spray paint from the basement.
Time will tell if it is reliable. But it was reasonably priced, delivered quicker than promised, and worked out of the box.
Click to expand...
Click to collapse
How thin is this thing? I am thinking I can tape the charger to the back of the cradle and then put the phone over it and slide in the side grips on my cradle to clamp the phone.so I don't have to plug my phone in every time I get in the car..
Jhonb said:
How thin is this thing? I am thinking I can tape the charger to the back of the cradle and then put the phone over it and slide in the side grips on my cradle to clamp the phone.so I don't have to plug my phone in every time I get in the car..
Click to expand...
Click to collapse
^^^ Previous post
jherbold said:
^^^ Previous post
Click to expand...
Click to collapse
Thanks, I did not see that.
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
I also bought such a cable. Mine is actually pretty good so far. Magnet power is good enough and the overall cable is just as good as a standard Sony cable. And only 3 euros incl. shipping.
Sent from my D5503 using XDA Free mobile app
AlanJC said:
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
Click to expand...
Click to collapse
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Phukkitt said:
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Click to expand...
Click to collapse
I That's given me an idea, perhaps these cables with some Sugru so that it aligns to the edge of the handset might do the trick!
Yup, I complained about the weakness of the magnet and got my money back from the eBay seller
pathaniya said:
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
The only official magnetic charger is the DK32 charging dock. The cables that most people buy are the same cables that is inside the dock, but it's impossible to know whether they are original parts or just copies since Sony doesn't officially sell that cable as a separate unit. The ones that sellers claim to be originals could very well only be meant as replacement parts or a simple way for phone repair shops to charge the phones.
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
zxqw said:
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
Click to expand...
Click to collapse
Well I paid 15 for mine (bought from a retailer) and they don't do refunds.
Lesson learnt...
What do you expect from such a small magnet? Imo it's quite strong already. I got this cable, which doesn't have a stronger magnet but aligns better, and it's cheap - I'm from Germany though: http://www.ebay.de/itm/-/291037184668
I also have the one the op has, with that one the phone started charging but it was so slow that it never finished. Modifiying the plastic and pins didn't help.
Not sure if it fits here, as my cable was not bought through ebay...
I got the OEM Magnetic Charging USB Cable for Sony Xperia Smartphone Black with Sony logo on the magnetic plug and it doesn't look too good: cheap to the looks and touch. The cable is thinner and feels flimsy compared to the USB charging cable that came stock with the phone. The magnet holds so-so but won't do too well when grabbing the phone, answering a call or whatever. The USB plug is huge, feels and looks cheap as well and can't be fully inserted into the charger; a bit of the metal part will stick out, that is.
I didn't do a full charge so far, so, can't commend on that part. I didn't measure the time but from what it felt like, the magnetic cable charges pretty fast - I'd say about the same rate as the stock micro USB cable (both with stock wall socket charger). But pay attention if you move the phone; the magnetic plug comes off really easy and might cause some bad surprise the next morning (the moment you wake up and notice your phone died on you and didn't wake you up ... about 2 hours ago, which was about an hour before you should've left to go to work and so on).
Now, if I'm not mistaken, witrigs says somewhere on their site that there would be huge difference between the Original OEM :angel: cable and the cheaper 3rd party ones the also offer. Honestly, I can't imagine the really cheap ones are much worse (as far as look & feel and usability goes).
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
harryw66 said:
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
Click to expand...
Click to collapse
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Wurstwarenfachverkäuferin said:
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Click to expand...
Click to collapse
I got the Zukin Mini Ultra Thin Aluminium Bumper
I cant post links so you will just have to google it - sorry.
It has cutouts for the Magentic port, the Sim card, the camera and the power + volume buttons, headphones and bottom speaker - but NOT the SD card nor the usb port...
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Regards, Chris
Sent from my Xperia Tablet Z (SGP321) using XDA Premium HD app.
harryw66 said:
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
Click to expand...
Click to collapse
dhchris said:
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Click to expand...
Click to collapse
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Xaeons said:
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Click to expand...
Click to collapse
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.
Regards, Chris
dhchris said:
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.s
Click to expand...
Click to collapse
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Xaeons said:
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Click to expand...
Click to collapse
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Wurstwarenfachverkäuferin said:
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Click to expand...
Click to collapse
I may order a magnetic charging cable from witrigs along with a glass back replacement part so I'd get more out of the shipping fee and shipping time.
There are options for shipping via different countries with different shipping costs (at the bottom upon checkout)
Those of you with the xperia z3 D6603 do you think the magnetic dock is necessary? Have those of you without the dock had any issues with the flap breaking or anything? Which is more of a risk using the ep21 cable from the dk31 dock and the magnetic port potentially comming out, or the flap on the usb breaking?
Magnetic cable/dock is comfortable, i usrd it over a year. Now i use normal usb since a year because it charges faster. No issues. Even if the cap brakes you can replace it easy.
punkt said:
Magnetic cable/dock is comfortable, i usrd it over a year. Now i use normal usb since a year because it charges faster. No issues. Even if the cap brakes you can replace it easy.
Click to expand...
Click to collapse
Alright thanks!! Ill probably go with the usb and a quick charger
No issues with flaps here, but I have heard of some people who used strong mag cables and had the mag port plate come off over time.
abhinav.tella said:
No issues with flaps here, but I have heard of some people who used strong mag cables and had the mag port plate come off over time.
Click to expand...
Click to collapse
Yeah I've heard that too, that's why I'd only use the Sony ep21 cable from the z1 dock
Personally, as a new xperia z3 user i mainly use the magnetic dock to charge the phone while i go sleep. Since the phones got a good battery life i find myself that i can last a day or 2 without charging and right before i go sleep i just use the magnetic dock overnight to charge it which does its job. Is the magnetic dock necessary? nope. It's just a nice thing to have. I've charged the phone with the opened flap as well and although some people will claim it gets worn out etc, if you open it and treat it gently you should be good to go.
I've used only usb charging and now after a year of use, the rubber part under the usb flap has come off (i suppose that's used to make the flap water proof)
Sent from my D6603 using XDA Free mobile app
saikoni said:
I've used only usb charging and now after a year of use, the rubber part under the usb flap has come off (i suppose that's used to make the flap water proof)
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
You can replace the flap though right?
kansasboy001 said:
You can replace the flap though right?
Click to expand...
Click to collapse
Yea, they're easily replaceable, actually replaced mine already while ago. Now my screen came off from the upper left corner, I guess the glue gave up... Waiting information from warranty center.
Sorry for noob question does the z3 support quick charge 2.0? read some sites saying yes and some saying no