Related
The dock is obviously great if you don't mind paying for it or get it free. However it's a bit clunky to carry around with you (if using a portable external battery) or in a car.
It's not a great option having to remove the waterproof flap all the time to charge as well.
So I got to thinking, could one modify an old mini / micro usb cable (I've tons of old micro ones laying around), so that the +/- cables go straight to the metal contacts on the Xz. I assume it is just a case of +/- on the docking connector? Would it matter if they were connected the wrong way...?
It'll be a bit of an in-elegant solution but to start with I was thinking of some bluetack and some sort of spacing connector bar to quickly press onto / pull off the phone.
I am pretty sure the polarity would matter, as it would be DC. However this is easy enough to check using a multimeter on the dock.
Good luck
For in-car use, I personally would put the sony charger there for the moment.
Brodit the in car holder maker will also make a version of holder which will use the contacts, but not sure when that will be out.
I'm wondering now if it might not be easier just to wait for a cheap chinese dock to come out on ebay. The dock's also got an advantage it'll hold your phone nicely if you want to use it with an external keyboard, or watch a film for example.
Just not keen on spending £25 on one.
I think it would be pretty easy to make your own, for the electrics would it just be a case of cutting the micro usb connector off then attaching red + black wires?
MobiusPizza said:
I am pretty sure the polarity would matter, as it would be DC. However this is easy enough to check using a multimeter on the dock.
Click to expand...
Click to collapse
Could someone with a dock check and post it?
Would be great.
This would be so cool. If it was like the Magsafe connectors on Macbooks it would be ideal. Probably not for me though. Hope you can do it.
Exactly what I was thinking off..
Taking the +/- 5V from the USB cable is not a problem. The main challenge is how to mount the 2 wires onto the metal contacts!
Removing the flaps has been pretty troublesome so far, especially when you're rushing off to somewhere and ya gotta use the GPS..
MasK said:
Exactly what I was thinking off..
Taking the +/- 5V from the USB cable is not a problem. The main challenge is how to mount the 2 wires onto the metal contacts!
Removing the flaps has been pretty troublesome so far, especially when you're rushing off to somewhere and ya gotta use the GPS..
Click to expand...
Click to collapse
copper foil would be easiest way to make the contacts, I've used it a few times in the past with my DIY wireless chargers
MasK said:
Exactly what I was thinking off..
Taking the +/- 5V from the USB cable is not a problem. The main challenge is how to mount the 2 wires onto the metal contacts!
Removing the flaps has been pretty troublesome so far, especially when you're rushing off to somewhere and ya gotta use the GPS..
Click to expand...
Click to collapse
I think that the biggest challange will be finding someone who will tell us which pin is + .....
Sent from my C6603 using xda app-developers app
has anyone got a dock yet?
The 3rd party stockists haven't shipped them yet have they? The bundle/deal is a post out one..
made a sort of dock, using 2 pins from a computer molex connector + foil, held the correct distance apart with glue from a hot glue gun, but need to wait until someone can find out the polarity before trying it!
I have exactly the same DIY idea but I want to kill two birds in one stone – wireless charging and MagSafe type of mobile charging interface.
I target for Xperia Z for its IPX protection and 4G. Being an IPX certified device, the port covers are important that I don’t know why Sony doesn’t have wireless charging just like its competitor Panasonic (model P-02E has both wireless charging and replaceable battery) having. The charging dock can solve this shortcoming a bit but the dock is only good for placing at home or in the office. When charging with external battery pack on the road, the it is better to have some handy charging cable to charge through the 2-pin. Then MagSafe type of cable is a good candidate.
Googled a bit and found a flip case (Muvit Qi Wireless Charging Kit for Sony Xperia Z) with Qi charging ready and I wonder it is utilizing the 2-pin as well. If I do the DIY, I will use a thin plastic case with the following components:
1) attach a Qi/Touchstone charging coil at the inner back side of the case
2) on side edge of the case facing the 2-pin of the device, I will attach a new 2-pin port with 2 small iron plate on each end, the 2-pin will connect to the charging coil and acts as the connector for the 2-pin of the device and piggy-back to the dock for charging
3) MagSafe type of charging cable is made by a normal USB cable with one end chopped to make a 2-pin connector with 2 small permanent magnets on each end for attaching to the iron plate mounted on the case above
Great idea Kimmy, looking forward to your work! Let us know what parts you use and where you get them! Would be great !
Sent from my C6603 using xda app-developers app
I was thinking of a simple clip onto the side over the pogo pins.
Has anyone got the polarity yet?
Those of you who maybe reading this and have the dock already please check the polarity.
And we have an answer!
The + is the upper pin, - is the lower
http://forum.xda-developers.com/showthread.php?p=38868648
Time to start playing
Sent from my C6603 using Tapatalk 2
I've just built my mark1 dock from a few bits of spare wood and an old sony ericsson ct75 charger plug( from an old powermat powercube), I just moved the spring loaded pins on CT75 plug a little further apart to mate a little more comfortably with the contacts on the XZ.
Cost absolutley nothing so although it looks rubish I'm happy to have a working dock. and not have to open the charger flap anymore. Tomorrow I might cover it in soft black cloth and i'm sure it'll look much better.
I'm going to bend a bit of black or clear Acrylic for my next dock because it looks like you can get away with a kind of z profile, I'm also thinking about making something for my car
jimsey said:
I've just built my mark1 dock from a few bits of spare wood and an old sony ericsson ct75 charger plug( from an old powermat powercube), I just moved the spring loaded pins on CT75 plug a little further apart to mate a little more comfortably with the contacts on the XZ.
Cost absolutley nothing so although it looks rubish I'm happy to have a working dock. and not have to open the charger flap anymore. Tomorrow I might cover it in soft black cloth and i'm sure it'll look much better.
I'm going to bend a bit of black or clear Acrylic for my next dock because it looks like you can get away with a kind of z profile, I'm also thinking about making something for my car
Click to expand...
Click to collapse
This is really cool, I have been working on something similar, but was having a hard time finding suitable pins(Tried just bare wire and foil!), Never thought of using the pits from an old Sony Ericsson charger
antipesto93 said:
This is really cool, I have been working on something similar, but was having a hard time finding suitable pins(Tried just bare wire and foil!), Never thought of using the pits from an old Sony Ericsson charger
Click to expand...
Click to collapse
yeah I wanted spring loaded pins and came across the old sony charger adapter when looking through my box of spares.
I opened up the jack and the pins just slide out with some careful pulling and slide back into another position, I then trimmed off the 2 prongs sony use to hold the charger into the phone, then it was just a case of fixing the jack in place with some hot glue.
the other idea i had was nabbing the battery contacts out of one of my daughters old toys, or making contacts from copper foil, but i'm happy with this result.
As i said I'll cover it in Black felt or plether tomorrow, and i'm sure it look much neater
What about instead of making a dock, just making a small, magnetized connector that attaches directly to the pins?
I'm still waiting for the phone to be released here so cant experiment but do you think this could be achievable?
I'm going to have a go at a small clip on using sugru/silicon rubber
Sent from my C6603 using Tapatalk 2
Does anyone know of a good desktop dock that will work with the S5?
I have the Samsung dock that worked great with my S3 and S4 but the stupid USB port cover on the S5 gets in the way.
ITNV said:
Does anyone know of a good desktop dock that will work with the S5?
I have the Samsung dock that worked great with my S3 and S4 but the stupid USB port cover on the S5 gets in the way.
Click to expand...
Click to collapse
I'm using this: http://www.ebay.ca/itm/331131359015?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
You can set the S5 on it and it will charge and be firmly in place because the charging pin is very high, but obvisouly, the charging port cover has to be flipped 180 degrees and i'm scared that i the long term it will break off. Thats why i switched back to just a regular cable
polish_pat said:
I'm using this: http://www.ebay.ca/itm/331131359015?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
You can set the S5 on it and it will charge and be firmly in place because the charging pin is very high, but obvisouly, the charging port cover has to be flipped 180 degrees and i'm scared that i the long term it will break off. Thats why i switched back to just a regular cable
Click to expand...
Click to collapse
Yeah, the connector for that charger cover doesn't strike me as super durable.
I guess I could take a dremmel to the part of the dock on the left side of the charging pin and make some room for the port cover. It won't look great but at least I could probably have a workable dock and not be worrying about breaking that cover off.
Thanks!
ITNV said:
Yeah, the connector for that charger cover doesn't strike me as super durable.
I guess I could take a dremmel to the part of the dock on the left side of the charging pin and make some room for the port cover. It won't look great but at least I could probably have a workable dock and not be worrying about breaking that cover off.
Thanks!
Click to expand...
Click to collapse
If you're the type of person that thinks paying 50$ for a dock that is made for 1$, just because it's branded, is the way to go, then sure. But I had this since august and it's as solid as day 1, for under 10$, you can't go wrong. Heck, you can even buy 2 and experiment with a dremel if you want at that price
polish_pat said:
If you're the type of person that thinks paying 50$ for a dock that is made for 1$, just because it's branded, is the way to go, then sure. But I had this since august and it's as solid as day 1, for under 10$, you can't go wrong. Heck, you can even buy 2 and experiment with a dremel if you want at that price
Click to expand...
Click to collapse
Sorry, I meant the charging cover on the phone isn't durable. That dock locks plenty solid. I was just thinking that I'd have to cut it up a little to alleviate the stress on the USB port cover.
Ahh, i see. I agree on one side, but on the other, i can't believe Samsung have not opened and closed that little cover thousands of times before slapping it on the S5. Samsung have good stress tests that tend to make our phones very durable. It would be a major screw up to put a fragile door on a phone that depends on that for its IP67 certification. Only time will tell, but I think i'll take out the dremel too and try to make the dock as S5 friendly as possible:fingers-crossed:
polish_pat said:
Ahh, i see. I agree on one side, but on the other, i can't believe Samsung have not opened and closed that little cover thousands of times before slapping it on the S5. Samsung have good stress tests that tend to make our phones very durable. It would be a major screw up to put a fragile door on a phone that depends on that for its IP67 certification. Only time will tell, but I think i'll take out the dremel too and try to make the dock as S5 friendly as possible:fingers-crossed:
Click to expand...
Click to collapse
Yeah, I thought about that too -- the door doesn't look too durable but then I thought that it had to have been a requirement of the IP67 certification for it to be relatively sturdy. I owned the XPeria Z1 and the S5's door seems about as durable. Time will tell, I guess.
I'm kind of annoyed that they didn't consider charging pins, that would have opened up charging $50 for a new branded dock.
I'm going to source a replacement back and wire up the induction charge points to pads on the back, then build a dock for it.
It's kind of silly requiring you to open the usb protector every night to charge it. (And I hate wasting power on induction charging)
Sent from my SM-G900I using Tapatalk
themers said:
I bought this, http://dx-box.com/dual-battery-charger-dock-cradle-holder-for-samsung-galaxy-s5.html
Click to expand...
Click to collapse
So how is it working? The cable seems to be pretty short....
themers said:
I bought this, http://dx-box.com/dual-battery-charger-dock-cradle-holder-for-samsung-galaxy-s5.html
Click to expand...
Click to collapse
Would love to hear how its working as I have been looking for a dock that will also charge a spare battery. Do you have any issues with the usb cover? Work with a case? The usb cord is very short, are you using a different one?
Thanks for posting this.
mortymouse said:
Would love to hear how its working as I have been looking for a dock that will also charge a spare battery. Do you have any issues with the usb cover? Work with a case? The usb cord is very short, are you using a different one?
Thanks for posting this.
Click to expand...
Click to collapse
Someone needs to make a q wireless charging standing desktop dock.
Here's another dock. And I have yet to figure out how they are putting an S5 into a dock without ripping the USB cover off the phone first. That cover does NOT bend back enough for the phone to sit flush. So wth?!?!
http://www.mobilefun.com/44349-samsung-galaxy-s5-desktop-charging-cradle.htm
Here's another that makes it look like the cover bends back 90 degrees.
http://www.amazon.com/MobilePioneer...=merchant-items&ie=UTF8&qid=1397694596&sr=1-6
initial_k said:
Someone needs to make a q wireless charging standing desktop dock.
Click to expand...
Click to collapse
They have its called a Nokia DT-910....
I like the Ppyple Swivel Charge
I have had this one for a while and I like the fact that the plug for this is just the end of a usb cable locked into place. I have been able to reverse it when I had a phone that docked backwards and now I have put to USB3 cable that came with the phone right into it so I get the best it can do.
http://www.amazon.com/Ppyple-Swivel...e=UTF8&qid=1397776785&sr=1-10&keywords=ppyple
---------- Post added at 04:33 PM ---------- Previous post was at 04:24 PM ----------
initial_k said:
Someone needs to make a q wireless charging standing desktop dock.
Click to expand...
Click to collapse
this one is reasonably priced.
http://www.amazon.com/PThink-Qi-Ena...=1397777513&sr=1-1&keywords=qi+charging+stand
seeing the picture with the flap folded back, it seems like it would be a fight every time, and no chance of that flap folding that way with a case on, it would then point down ??
loved my s3 on a dock at my desk, time and weather.
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
I also bought such a cable. Mine is actually pretty good so far. Magnet power is good enough and the overall cable is just as good as a standard Sony cable. And only 3 euros incl. shipping.
Sent from my D5503 using XDA Free mobile app
AlanJC said:
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
Click to expand...
Click to collapse
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Phukkitt said:
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Click to expand...
Click to collapse
I That's given me an idea, perhaps these cables with some Sugru so that it aligns to the edge of the handset might do the trick!
Yup, I complained about the weakness of the magnet and got my money back from the eBay seller
pathaniya said:
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
The only official magnetic charger is the DK32 charging dock. The cables that most people buy are the same cables that is inside the dock, but it's impossible to know whether they are original parts or just copies since Sony doesn't officially sell that cable as a separate unit. The ones that sellers claim to be originals could very well only be meant as replacement parts or a simple way for phone repair shops to charge the phones.
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
zxqw said:
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
Click to expand...
Click to collapse
Well I paid 15 for mine (bought from a retailer) and they don't do refunds.
Lesson learnt...
What do you expect from such a small magnet? Imo it's quite strong already. I got this cable, which doesn't have a stronger magnet but aligns better, and it's cheap - I'm from Germany though: http://www.ebay.de/itm/-/291037184668
I also have the one the op has, with that one the phone started charging but it was so slow that it never finished. Modifiying the plastic and pins didn't help.
Not sure if it fits here, as my cable was not bought through ebay...
I got the OEM Magnetic Charging USB Cable for Sony Xperia Smartphone Black with Sony logo on the magnetic plug and it doesn't look too good: cheap to the looks and touch. The cable is thinner and feels flimsy compared to the USB charging cable that came stock with the phone. The magnet holds so-so but won't do too well when grabbing the phone, answering a call or whatever. The USB plug is huge, feels and looks cheap as well and can't be fully inserted into the charger; a bit of the metal part will stick out, that is.
I didn't do a full charge so far, so, can't commend on that part. I didn't measure the time but from what it felt like, the magnetic cable charges pretty fast - I'd say about the same rate as the stock micro USB cable (both with stock wall socket charger). But pay attention if you move the phone; the magnetic plug comes off really easy and might cause some bad surprise the next morning (the moment you wake up and notice your phone died on you and didn't wake you up ... about 2 hours ago, which was about an hour before you should've left to go to work and so on).
Now, if I'm not mistaken, witrigs says somewhere on their site that there would be huge difference between the Original OEM :angel: cable and the cheaper 3rd party ones the also offer. Honestly, I can't imagine the really cheap ones are much worse (as far as look & feel and usability goes).
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
harryw66 said:
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
Click to expand...
Click to collapse
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Wurstwarenfachverkäuferin said:
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Click to expand...
Click to collapse
I got the Zukin Mini Ultra Thin Aluminium Bumper
I cant post links so you will just have to google it - sorry.
It has cutouts for the Magentic port, the Sim card, the camera and the power + volume buttons, headphones and bottom speaker - but NOT the SD card nor the usb port...
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Regards, Chris
Sent from my Xperia Tablet Z (SGP321) using XDA Premium HD app.
harryw66 said:
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
Click to expand...
Click to collapse
dhchris said:
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Click to expand...
Click to collapse
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Xaeons said:
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Click to expand...
Click to collapse
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.
Regards, Chris
dhchris said:
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.s
Click to expand...
Click to collapse
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Xaeons said:
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Click to expand...
Click to collapse
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Wurstwarenfachverkäuferin said:
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Click to expand...
Click to collapse
I may order a magnetic charging cable from witrigs along with a glass back replacement part so I'd get more out of the shipping fee and shipping time.
There are options for shipping via different countries with different shipping costs (at the bottom upon checkout)
Hi folks,
Can any of you point me in the direction of a supplier of magnetic charging lead fit the z1 compact that will post to the UK at a sensible price?
Thanks.
John
Sent from my D5503 using XDA Free mobile app
Jwsail said:
Hi folks,
Can any of you point me in the direction of a supplier of magnetic charging lead fit the z1 compact that will post to the UK at a sensible price?
Thanks.
John
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
dx-box
Cheers for that. That link proved just the job -I haven't ordered one from there, but it turns out what I thought was the obvious search term on ebay abs amazon wasn't
Sent from my D5503 using XDA Free mobile app
Jwsail said:
Cheers for that. That link proved just the job -I haven't ordered one from there, but it turns out what I thought was the obvious search term on ebay abs amazon wasn't
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
If I were you I wouldn't... The cable has an extremely weak magnet, it comes off at the slightest touch. It would be impossible to use whilst the phone is charging. I could have got the really cheap cable from Amazon but because of the reviews about it's weak magnet I instead got a more expensive cable from mobilefun.co.uk. Unfortunately it was the same poor quality cable.
theprince1991 said:
If I were you I wouldn't... The cable has an extremely weak magnet, it comes off at the slightest touch. It would be impossible to use whilst the phone is charging. I could have got the really cheap cable from Amazon but because of the reviews about it's weak magnet I instead got a more expensive cable from mobilefun.co.uk. Unfortunately it was the same poor quality cable.
Click to expand...
Click to collapse
It's not that the magnet itself is weak, it's rather the design of it.
I can lift my phone with the magnet, even shake a little up and down without it falling off.
However, as you might know the easiest way to remove a magnet is to tilt/angle it, which the design of this magnet makes way too easy.
After all, the entire connector was designed around being mounted inside a charging stand, where the phone's angle to the connector would never change. Using it as a separate cable was never intended, the cable you can buy for example at dx-box is the very same cable that is supposed to be inside that charging stand.
I think if they designed a cable where the plastic around the magnet and the connectors was laying flush against the phone, tilting the cable would become less of an issue.
That said, I can use the phone just fine with the magnet connected as long as I don't pull on the cable, as the magnet is strong enough to handle the weight of the cable with no problem.
Phukkitt said:
It's not that the magnet itself is weak, it's rather the design of it.
I can lift my phone with the magnet, even shake a little up and down without it falling off.
However, as you might know the easiest way to remove a magnet is to tilt/angle it, which the design of this magnet makes way too easy.
After all, the entire connector was designed around being mounted inside a charging stand, where the phone's angle to the connector would never change. Using it as a separate cable was never intended, the cable you can buy for example at dx-box is the very same cable that is supposed to be inside that charging stand.
I think if they designed a cable where the plastic around the magnet and the connectors was laying flush against the phone, tilting the cable would become less of an issue.
That said, I can use the phone just fine with the magnet connected as long as I don't pull on the cable, as the magnet is strong enough to handle the weight of the cable with no problem.
Click to expand...
Click to collapse
Yup you are 100% right. I can indeed lift the phone up using the connector. The problem is with the tilt/angle as you've already mentioned above.
any of you is using thie cable from witrigs ?
http://www.witrigs.com/custom-magnetic-charging-cable-for-sony-xperia-z1-compact-black
i am also considering the magnector X, but if i plan to replace back by glass one, then purchase of this from witrigs is better economically. But don't know how does it works? How is it with charging speed and battery life?
and the last one, anyone using this original cable? and how much is it "original" ?
http://www.ebay.com/itm/Genuine-Ori..._PDA_Cables_Adapters&var=&hash=item3f32e3085b
I've bought one from Amazon and returned it, the cable was falling off at the slightest touch and it was even difficult to set right to charge.
I wanted it for charging the phone in my car, which already has a usb socket adapter, but with the falling out problem it was a no-go from the start.
On the plus side, I ended up with a Supremery charging dock, which is cheaper than Sony and works better (for me at least).
I don't use it in the car - just to be clear
but was it the same from amazon that i linked, or something far cheaper, "branded " by Sony ?
How is it with battery life on Supremery charging dock? Do you see shorter life and longer charging? Am asking because some guys were complaining for those on not original dock.
Thanks
Try this one out, apparently its got fantastic build quality and a very strong magnet.
Every review I have seen has given it 5/5 and most people mentioned buying another for the car/office etc :good:
http://www.ebay.co.uk/itm/Magnector...al_Components_Supplies_ET&hash=item4ad676cb92
they also do a standard cable...
http://www.ebay.co.uk/itm/Magnector...al_Components_Supplies_ET&hash=item4ad676cb92
I really would like to buy this Magnector X cable but I have not found a good way to buy and ship this to Austria/Europe. Any ideas where I can buy this with realistic shipping prices to get this inside the european union?
I bought 2 pieces of Magnector directly from producer: http://magnector.com/?product=magnector-x-adaptersony-xperia-magnetic-adapter
Calculating with delivery to Slovakia it was around 26€.
I am more than satisfied with this product and totally recommend it.
You can have only problem if you are using some case. It is designed for use without it.
Just order this, http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
edesired said:
Just order this, http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
Click to expand...
Click to collapse
this is a copy paste fake of magnectox
in description it says"Perfect conversion adapter for Micro USB to Sony Xperia Z1 or Z2 OR Z1S Charging Cable
Premium Detailed Finish with complete retail package and adapter pouch
2 Times High Magnetic Power than original Sony Xperia Charging Cable
Maximum Charging Speed from Magnector's Enhanced Technology.
Applied "Reverse Attachment Charging Protection" Technology to protect your device
"
Lasantha said:
this is a copy paste fake of magnectox "
Click to expand...
Click to collapse
What do you mean by that?
What do you want to tell us with that?
Do you mean "Magnector X" ?
The Question is: Is it nevertheless a good product?
(I don't really care if they just copy&paste the description of another "premium" product)
I already ordered two of those cables so maybe I have wasted some euros on a cable no one of the posters above has ever tested?!
ViennaLinux said:
What do you mean by that?
What do you want to tell us with that?
Do you mean "Magnector X" ?
The Question is: Is it nevertheless a good product?
(I don't really care if they just copy&paste the description of another "premium" product)
I already ordered two of those cables so maybe I have wasted some euros on a cable no one of the posters above has ever tested?!: confused:
Click to expand...
Click to collapse
Well let us know [emoji1]
I got this one and it is fine. Works a treat. http://www.ebay.co.uk/itm/121400865231?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
snitter said:
I got this one and it is fine. Works a treat. http://www.ebay.co.uk/itm/121400865231?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I have 3 of the dx-box ones:
http://dx-box.com/brand-new-magneti...dapter-for-sony-xperia-z1-xperia-z-ultra.html
The magnet may not be ask strong as the High Performance one, but its plenty strong enough for me. I use one in my car and the lead has never detached even when I have gone over pot holes or bumps in the road.
Also, at home I find it stays attached well enough for everyday usage.
Ordered from ebay same product as Sony official except it didn't have Sony logo and was like 3 times cheaper.
I have received the magnector cable and can confirm that the magnet is very powerfull. One can easily lift up the phone by the cable.
It doesn't however automatically snap on to the two (tiny) charging pins. It takes a little bit of practice to make it work.
I Just Noticed Something.. The Magnetic Connectors on the Z3 are not Similar..
One Nub is Circular whereas the other one is more elliptical..
Is that Normal? or is that a Defect in My phone..
I noticed a 3rd Party (Crappy) Connector i Bough also has the same kind of Mold.
I Have Included a Pic in the attatchments.. just wanted to make sure it is an intended Thing than A Defect in my Phone.
I just checked mine and its the exact same as yours. I don't have a charger though. My charger flap is starting to show signs of fatigue, not sealing and lose
serv380 said:
I just checked mine and its the exact same as yours. I don't have a charger though. My charger flap is starting to show signs of fatigue, not sealing and lose
Click to expand...
Click to collapse
Glad to here that its Probably Meant to be that way..
Also That is Exactly the reason i Have my magnetic Charging Accessories.. i have a USB TO Magnetic Cable and also A Dock too.. i never use my USB Port until Absolutely Necessary.. Like Firmware Update or something like that.
Yup definitely my next purchase
Yep, meant to be different. I'd assume so that it will only fit one way