Related
I noticed that my galaxy was sluggish & decided to preform the solution here: hemorrdroids.net, speed up your Samsung galaxy S
now in the process, i got it wrong several times whiles flashing with the odin. when I finally got it right and reinstalled the firmware, the phone displays a no service notification, but show the name of the network chip in it. no signal bars as if it were locked. I bought it as unlocked phone. now I cant even search for a single network in my country. when u do a manual search, it returns nothing. if u try the dialer it says not registered to network..
does anyone know how to get my signal a GPS working?? please!!!!!!!!!!!!!
Hmm... I've got the same problem as you... Flashed docs to my Galaxy S Yesterday and now it show no service notification.... Anyone who have a got an idea?
I am also facing the same problem. Any one who has solved it ?
Got the same problem, from 1 day i have notification (no service)
Got the same problem plz plz some one helpp
Not sure if it's the same problem you folks are having, but there's a thread on here entitled "Problem with Airplane Mode on Epic after installing midNight ROM" that describes a problem with no signal after a ROM flash, and a solution via using Odin to update just the modem.
I would post a link, but the forum here won't let me because I don't have enough posts. Your mileage may vary, but the symptoms sound similar so it might give you a place to start even if the fix doesn't fix you.
I too am having the same problem. It seems that my Phone (Galaxy SC-02b) does not recognize the modem/internal antena.
I installed the Darky's Rom on it, and it runs great. Except the signal part. I can flash it back to the original, but I want to see if I can make it work.
I think it's just a matter of picking out the correct modem tar, but I can't find the right one. My phone is a little bit odd, It's a Japanese Galaxy, so not sure if I can find it here. Unfortunately my Japanese is not good enough to go scouring the japanese forums.
Thanks for any help.
Hey Yefimenko what 3G bands are used in Japan 1900/850 or maybe 900/2100 or 1700/2100 ? Can you find that out ? then you need to flash modem that supports that , Europe support 900/2100 US/Canada/Australia 850/1900 and AWS 1700/2100 Tmobile US /Wind? mobilicity Canada
Hitec
We've been through all of this before the Japanese phones will only work with the Japanese kernel. Symptoms are usually sin not recognized and no radio signal. QUOTE=yefymenko;11612862]I too am having the same problem. It seems that my Phone (Galaxy SC-02b) does not recognize the modem/internal antena.
I installed the Darky's Rom on it, and it runs great. Except the signal part. I can flash it back to the original, but I want to see if I can make it work.
I think it's just a matter of picking out the correct modem tar, but I can't find the right one. My phone is a little bit odd, It's a Japanese Galaxy, so not sure if I can find it here. Unfortunately my Japanese is not good enough to go scouring the japanese forums.
Thanks for any help.[/QUOTE]
Sent from my SC-02B using XDA Premium App
Either the phone.apk is bad or the modem is incompatible.
You could try the http://romkitchen.org/ and make an update with different modem only.
If your Samsung Galaxy S displays no network/no signal, or emergency calls only, try the following things:
1. flash the device again with the modem image (download the firmware of your device from samfirmwares.com, delete everything from the .tar file except modem.bin, and then flash this file to the phone with Odin (you can get Odin and instructions from that site too)
2. maybe your nv_data.bin file or /efs directory got corrupted, make a backup of the folder, then simply delete nv_data.bin, it will be recreated for you on Galaxy S.
For this, you’ll need root. If you have a root-enabled kernel, like the Voodoo lagfix kernel, you only have to install the Superuser app and Busybox on the phone, download the Android SDK to your PC, install platform-tools in the SDK manager, go to the platform-tools directory and start adb shell.
In the shell, type su, wait for the Superuser prompt to appear on the phone (if it does not appear, open the Superuser app and try executing su again), enable root access for the command. Now go to /efs, copy everything to for example /sdcard/efs, then rm nv_data.bin.
Reflashing the device with a kernel and checking “phone EFS clear” in Odin also works (make sure you made a backup of the EFS folder just in case).
3. you can try changing the CSC (to XEO for Europe): enter *#272*imei# on the phone tab. Note: this will reset your phone to factory settings, so make sure you did a clockworkmod backup before this. Incorrect CSC setting may cause MMS not working also.
4. check if you inserted the SIM card correctly
Thanks
MertBaBaaa
first check imei no
hello for all members,
i have solution for this problem "not network or not signal" Samsng Galaxy SC-02B Docomo
later write my solution phone work all World
__________
XcachorroX
galaksy s no signal
3. you can try changing the CSC (to XEO for Europe): enter *#272*imei# on the phone tab. Note: this will reset your phone to factory settings, so make sure you did a clockworkmod backup before this. Incorrect CSC setting may cause MMS not working also.
this solution works for me and thanks alot many many thanks
maybe i've got a solution for the no service probleme. i tried this code *2767*3855# and my phone works normal now
i hope it works for you guys
No Network after change of CSC - is there a recovery strategy?
SOLVED
======
Asked around and it goes like this: 2.1 + market = no signal, (2.2 or 2.3) + market = no problem
Solution is UPGRADE from 2.1. to 2.2 or better - I hope this will help anyone else with the same problem.
If you can't do it yourself, any mobile shop will for a small fee.
Symptoms
========
Changed CSC from KSA to XSG with code *#272*HHMM# for 2.1 (no Market in KSA mode)
Galaxy S GT-I9000 now shows blue circle with diagonal in notification area at top of screen.
Settings > Wireless and network > Mobile networks Network mode > Network operators > Search Networks or Select Automatically produces no response - finds no networks.
Dialpad dial a number => "Not registered on network"
Coincidental hardware failure seems very unlikely but not impossible I suppose.
What I would like to know is if there is a recovery strategy from here?
Even if it includes installing a complete new firmware? (and possibility to revert to original if required for warranty)
Device does not respond to "3-finger salute" (volume-home-power).
I am not confident that a warranty is worth all that much in this part of the world. It may be quicker and more effective to do it myself.
Further details of history and phone info below.
I will be very grateful if anyone can help me out
History
=======
Phone purchased in Saudi Arabia (KSA). Worked fine with pre-paid SIM (mobily) voice, data, sms, wifi.
Phone also worked fine with a pre-paid sim (cosmote whatsup) in Greece - voice, data, sms, wifi.
However, since phone was purchased in KSA, Android Market was not installed. Found a Market.apk and installed that. Installs but doesn't actually work.
Found code for changing CSC (*#272*HHMM# for 2.1, *#272*[IMEI No]# for 2.2) 2 colleagues had success and no problems with this with a Tab and 2 Ss, albeit with 2.2. The code looks worth a try on 2.1 so I gave it a go.
Had to remove the side-loaded Market before the code would run and changed the CSC from KSA to XSG.
Market pops up on the screen and works fine.
BUT no network. Network name shows in the Notifications though. The GR SIM shows "(No Service)"
Factory reset, returning CSC to KSA do not help.
The mobily SIM works fine in other phones but no known good SIM works in this phone.
Mobily tech support (in store visit, usually commpetent guy who knows me) is completely flummoxed and asks me if I have a warranty.
So now I have a very compact WiFi only tablet
Phone Info
==========
Model number: GT-I9000
Firmware version: 2.1-update1
Baseband version: I9000JXJG2
Kernel version: 2.6.29 [email protected] #2
Build number: ECLAIR.JPJG8
Personalisatiob(sic) Status
Network Lock
[OFF]
Network Subset Lock
[OFF]
SP Lock
[OFF]
CP Lock
[OFF]
Settings > Wireless and network > Mobile networks Network mode > GSM/WCDMA (auto mode)
Solution to your problem
Hi All,
This happened to me before and I was as frustrated as you and when I was about to give up, I tried one last restoration, but only this time I did it correctly. After that, I restored 5 different versions of Samsung Galaxy S stock ROM back to my Samsung Galaxy S. One of these versions were Chinese, and everything was in Chinese.
Samsung Galaxy S had no signal was because the modem file was missing while you were performing the restoration.
Now, all you have to do is go to this page and follow the instructions to restore the Stock ROM back to your Samsung Galaxy S.
same problems
Hi guys, I have same problem. But a litle diffirent.
When I use 2.3.6 firmware version it's work well no problem. But when I use 4.x.x Rom it says no network and no imei. If I use 4.x.x om pluged the charge my device ,I see gsm company and imei number. It's very interesting. I think , electricty not enough for my device. Maybe Its hardware problems. I 'dont any idea.
How can I solve this problem?
Thanks.
Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi
Did you set the APN manually? You have to do that.
Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!
apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country
If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours
You can flash a .Bin File for Your P920 or P920H.
Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi
Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.
it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband
On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?
Im working on making a rom for the I497 using the kitchen
Im so far that I have a flashable working rom
Only have one issue that the radio does not work (or sim)
baseband version is unknown, and basicly all radio related info shows unknown under the about device tab and status
wifi works fine ,but it seems the radio is non existent
When I tab on the mobile network option it tells me I have to insert a sim to access network services
The sim is in and when I restore back a working version it all works fine
This rom is a extracted version of my tablet of the 4.1.2 jb update we had recently
I have to have a deodexed version before i can change things like voice capable
there are no jb custom roms available for this tablet ,so with my non existing knowledge i had to dive in to unknown territory
So far i got everything set up including mount paths etc , but somehow there is a link to the radio missing ????
Any help will be appreciated
Hello All,
I am new to rooting phones and recently tried something on a galaxy S2. I had a korean version of S2 model SHW-250s which was locked. I lost my new phone so tried unlocking this myself...looked at some youtube videos some blogs and finally decided to use this method posted by someone:
1)Flash these two files using ODIN to convert the korean model into international version :
GTI9100_ext4.pit
9100XWLPW_I9100ODDLPC_I9100DDLPB_HOME.tar.md5 (stock ICS firmware for my country).
This successfully converted my phone to S2i9100.
2)Then to unlock I used a siyah kernel as posted by a developer :: Siyah-v3.2b8
This successfully installed SU and i checked using RootChecker apps that there is root access.
3)Then to unlock my phone i used GalaxSimUnlock app (did rooting as this app required root access)
This successfully unlocked my phone. I was able to call receive messages with new carrier.
I installed some more general apps used it for 5 days.
Sudddenly i started facing network issues. I was not able to make or receive calls. Strangely, I was getting data connection from network but not able to make or receive calls. I could not register on any network.
I tried running GalxSimUnlock app again and it said Unable to read NV data.Since I was naive i tried reinstalling the stock ROM and SIYAH kernel to see if it helps. It didnt.
When i researched further i came to know there's probably something wrong in the NV_data.bin file in EFS . But i hadnt taken backup of EFS previously. Now can anythng be done to restore the EFS and make the phone work? Please help me....
When i run GalaxSimUnlock app it shows everything in green except IMEI number which it blinks in red. But I am able to see a IMEI number and it doesnt look like something default. I am getting everything else MAC id, baseband version etc.
Thanks everybody...please forgive my language if not upto the mark as i am pretty naive about this stuff.
Please Review this thread [GUIDE] Recover your IMEI in 9 steps.
If you have specific question on the process, you can post this thread as well.
If that does not work and you need further help, please post in Galaxy S II Q&A, Help & Troubleshooting
Hey Buddy....Thanks for replying....i just saw you have written you flashed the original ROM on your device again...but as I wrote I have flashed another ROM and didnt take back up of original one and cannot find the SKT korea S2 ROm for this one...Is it ok if i employ the procedure told by you without flashing original ROM...what is CSC? Is there anything else you wanna tell me before i start the process? please forgive for my ignorance Im quite new to all this...
You will have to ask on the thread I linked regarding the Rom. You will have the right experts for your device there.
CSC is sales code., you can check your ROM CSC by dialling *#1234# . First two digits represents country and last three represents release time.
ok thanks...i will post the question there
Per Suggestion from my Collegue @It_ler,
The kernel you have is older. Latest SiyahKernel for the stock JB ROM he has on his device is SiyahKernel S2-v5.0.1.
If you have questions about the kernel, then use the [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!! (SiyahKernel discussion) thread.
Hello , i'm new here
unfortunately i have a problem with my S3 verizon SCH-i535 , when it was stock , i couldn't add an APN , i just could make calls and send sms, but no 3g connection.
i thought if i flash a new rom i could fix it , so i tried to flash CM12.1 ROM for Galaxy S3 Verizon SCH-i535 as shown on this video :
youtube.com/watch?v=4xu1Vgink8Y
but it made it worse , now the phone doesn't even detect the sim card , and there isn't even an option on the setting menu to access APN.
Please help me guys ! if you need more info just tell me.
I fixed this by putting my sim back to the phone and reflashing , everything works fine now.
however , when i call sombody and and cancel the call its keeps on calling , how do i fix this ? or do you have any stable good rom to flash it ?
RashidVet said:
Hello , i'm new here
unfortunately i have a problem with my S3 verizon SCH-i535 , when it was stock , i couldn't add an APN , i just could make calls and send sms, but no 3g connection.
i thought if i flash a new rom i could fix it , so i tried to flash CM12.1 ROM for Galaxy S3 Verizon SCH-i535 as shown on this video :
youtube.com/watch?v=4xu1Vgink8Y
but it made it worse , now the phone doesn't even detect the sim card , and there isn't even an option on the setting menu to access APN.
Please help me guys ! if you need more info just tell me.
Click to expand...
Click to collapse
go to factory restore and add new apn then it will work fine