I noticed that my galaxy was sluggish & decided to preform the solution here: hemorrdroids.net, speed up your Samsung galaxy S
now in the process, i got it wrong several times whiles flashing with the odin. when I finally got it right and reinstalled the firmware, the phone displays a no service notification, but show the name of the network chip in it. no signal bars as if it were locked. I bought it as unlocked phone. now I cant even search for a single network in my country. when u do a manual search, it returns nothing. if u try the dialer it says not registered to network..
does anyone know how to get my signal a GPS working?? please!!!!!!!!!!!!!
Hmm... I've got the same problem as you... Flashed docs to my Galaxy S Yesterday and now it show no service notification.... Anyone who have a got an idea?
I am also facing the same problem. Any one who has solved it ?
Got the same problem, from 1 day i have notification (no service)
Got the same problem plz plz some one helpp
Not sure if it's the same problem you folks are having, but there's a thread on here entitled "Problem with Airplane Mode on Epic after installing midNight ROM" that describes a problem with no signal after a ROM flash, and a solution via using Odin to update just the modem.
I would post a link, but the forum here won't let me because I don't have enough posts. Your mileage may vary, but the symptoms sound similar so it might give you a place to start even if the fix doesn't fix you.
I too am having the same problem. It seems that my Phone (Galaxy SC-02b) does not recognize the modem/internal antena.
I installed the Darky's Rom on it, and it runs great. Except the signal part. I can flash it back to the original, but I want to see if I can make it work.
I think it's just a matter of picking out the correct modem tar, but I can't find the right one. My phone is a little bit odd, It's a Japanese Galaxy, so not sure if I can find it here. Unfortunately my Japanese is not good enough to go scouring the japanese forums.
Thanks for any help.
Hey Yefimenko what 3G bands are used in Japan 1900/850 or maybe 900/2100 or 1700/2100 ? Can you find that out ? then you need to flash modem that supports that , Europe support 900/2100 US/Canada/Australia 850/1900 and AWS 1700/2100 Tmobile US /Wind? mobilicity Canada
Hitec
We've been through all of this before the Japanese phones will only work with the Japanese kernel. Symptoms are usually sin not recognized and no radio signal. QUOTE=yefymenko;11612862]I too am having the same problem. It seems that my Phone (Galaxy SC-02b) does not recognize the modem/internal antena.
I installed the Darky's Rom on it, and it runs great. Except the signal part. I can flash it back to the original, but I want to see if I can make it work.
I think it's just a matter of picking out the correct modem tar, but I can't find the right one. My phone is a little bit odd, It's a Japanese Galaxy, so not sure if I can find it here. Unfortunately my Japanese is not good enough to go scouring the japanese forums.
Thanks for any help.[/QUOTE]
Sent from my SC-02B using XDA Premium App
Either the phone.apk is bad or the modem is incompatible.
You could try the http://romkitchen.org/ and make an update with different modem only.
If your Samsung Galaxy S displays no network/no signal, or emergency calls only, try the following things:
1. flash the device again with the modem image (download the firmware of your device from samfirmwares.com, delete everything from the .tar file except modem.bin, and then flash this file to the phone with Odin (you can get Odin and instructions from that site too)
2. maybe your nv_data.bin file or /efs directory got corrupted, make a backup of the folder, then simply delete nv_data.bin, it will be recreated for you on Galaxy S.
For this, you’ll need root. If you have a root-enabled kernel, like the Voodoo lagfix kernel, you only have to install the Superuser app and Busybox on the phone, download the Android SDK to your PC, install platform-tools in the SDK manager, go to the platform-tools directory and start adb shell.
In the shell, type su, wait for the Superuser prompt to appear on the phone (if it does not appear, open the Superuser app and try executing su again), enable root access for the command. Now go to /efs, copy everything to for example /sdcard/efs, then rm nv_data.bin.
Reflashing the device with a kernel and checking “phone EFS clear” in Odin also works (make sure you made a backup of the EFS folder just in case).
3. you can try changing the CSC (to XEO for Europe): enter *#272*imei# on the phone tab. Note: this will reset your phone to factory settings, so make sure you did a clockworkmod backup before this. Incorrect CSC setting may cause MMS not working also.
4. check if you inserted the SIM card correctly
Thanks
MertBaBaaa
first check imei no
hello for all members,
i have solution for this problem "not network or not signal" Samsng Galaxy SC-02B Docomo
later write my solution phone work all World
__________
XcachorroX
galaksy s no signal
3. you can try changing the CSC (to XEO for Europe): enter *#272*imei# on the phone tab. Note: this will reset your phone to factory settings, so make sure you did a clockworkmod backup before this. Incorrect CSC setting may cause MMS not working also.
this solution works for me and thanks alot many many thanks
maybe i've got a solution for the no service probleme. i tried this code *2767*3855# and my phone works normal now
i hope it works for you guys
No Network after change of CSC - is there a recovery strategy?
SOLVED
======
Asked around and it goes like this: 2.1 + market = no signal, (2.2 or 2.3) + market = no problem
Solution is UPGRADE from 2.1. to 2.2 or better - I hope this will help anyone else with the same problem.
If you can't do it yourself, any mobile shop will for a small fee.
Symptoms
========
Changed CSC from KSA to XSG with code *#272*HHMM# for 2.1 (no Market in KSA mode)
Galaxy S GT-I9000 now shows blue circle with diagonal in notification area at top of screen.
Settings > Wireless and network > Mobile networks Network mode > Network operators > Search Networks or Select Automatically produces no response - finds no networks.
Dialpad dial a number => "Not registered on network"
Coincidental hardware failure seems very unlikely but not impossible I suppose.
What I would like to know is if there is a recovery strategy from here?
Even if it includes installing a complete new firmware? (and possibility to revert to original if required for warranty)
Device does not respond to "3-finger salute" (volume-home-power).
I am not confident that a warranty is worth all that much in this part of the world. It may be quicker and more effective to do it myself.
Further details of history and phone info below.
I will be very grateful if anyone can help me out
History
=======
Phone purchased in Saudi Arabia (KSA). Worked fine with pre-paid SIM (mobily) voice, data, sms, wifi.
Phone also worked fine with a pre-paid sim (cosmote whatsup) in Greece - voice, data, sms, wifi.
However, since phone was purchased in KSA, Android Market was not installed. Found a Market.apk and installed that. Installs but doesn't actually work.
Found code for changing CSC (*#272*HHMM# for 2.1, *#272*[IMEI No]# for 2.2) 2 colleagues had success and no problems with this with a Tab and 2 Ss, albeit with 2.2. The code looks worth a try on 2.1 so I gave it a go.
Had to remove the side-loaded Market before the code would run and changed the CSC from KSA to XSG.
Market pops up on the screen and works fine.
BUT no network. Network name shows in the Notifications though. The GR SIM shows "(No Service)"
Factory reset, returning CSC to KSA do not help.
The mobily SIM works fine in other phones but no known good SIM works in this phone.
Mobily tech support (in store visit, usually commpetent guy who knows me) is completely flummoxed and asks me if I have a warranty.
So now I have a very compact WiFi only tablet
Phone Info
==========
Model number: GT-I9000
Firmware version: 2.1-update1
Baseband version: I9000JXJG2
Kernel version: 2.6.29 [email protected] #2
Build number: ECLAIR.JPJG8
Personalisatiob(sic) Status
Network Lock
[OFF]
Network Subset Lock
[OFF]
SP Lock
[OFF]
CP Lock
[OFF]
Settings > Wireless and network > Mobile networks Network mode > GSM/WCDMA (auto mode)
Solution to your problem
Hi All,
This happened to me before and I was as frustrated as you and when I was about to give up, I tried one last restoration, but only this time I did it correctly. After that, I restored 5 different versions of Samsung Galaxy S stock ROM back to my Samsung Galaxy S. One of these versions were Chinese, and everything was in Chinese.
Samsung Galaxy S had no signal was because the modem file was missing while you were performing the restoration.
Now, all you have to do is go to this page and follow the instructions to restore the Stock ROM back to your Samsung Galaxy S.
same problems
Hi guys, I have same problem. But a litle diffirent.
When I use 2.3.6 firmware version it's work well no problem. But when I use 4.x.x Rom it says no network and no imei. If I use 4.x.x om pluged the charge my device ,I see gsm company and imei number. It's very interesting. I think , electricty not enough for my device. Maybe Its hardware problems. I 'dont any idea.
How can I solve this problem?
Thanks.
Related
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
I have Samsung Galaxy S3 GT-I9300. When the google drive app was downloading from google play, my phone went off due to poor battery. Later when I tried to turn it ON, it has been getting stuck in the boot. So I decided to reinstall my custom ROM. Being busy with my baby, toddler, household chores and job, I gave it to my brother to flash the ROM. After a while, I noticed that my sim was bricked.
It says "Emergency Calls Only", has fake IMEI but working signal.
We did not backup the efs. I tried searching all the methods like modem installation, CSC, baseband verions, IMEI re-write, Kies Upgrade and Initialization, other people's efs restore, etc. But the problem is unchanged. Some of the followed method might have failed for not having proper knowledge like IMEI re-write tool works on specified chipset, etc.
What we noticed is that using different baseband version toggles from having network signal or no signal.
Kies shows more than four firmware versions and no other details like CSC, etc.
How do I clean up all these especially to have SIM working on my phone?
I appreciate you assistance to be brief and clear to understand steps than sending links. Because my time is stress-fully short.
Hi !
There is some confusing info in your post
What do you mean with it has fake IMEI " ? Have you changed it ?
You say that you have a working SIM on certain basebands , is this happening on a custom rom or stock ?
Have you tried to flash a stock firmware as I see that you tried to flash "your custom rom " ?
Cheers !
First of all, thank you for your response and interest to assist.
My mobile's IMEI is shown as 004999010640000 which is not original. Can you help me to change it to correct IMEI suitable for my Samsung S3 GT-i9300 chipset, if that helps in enabling sim to connect to a network? I think changing method only masks the IMEI?
I have tried flashing stock firmware and also Kies Upgrade and Initialization.
I have also changed baseband version installation on stock ROM too. I don't know which baseband is correct to keep.. for my country India or in the country where my mobile is manufactured, incase that's locking sim accessibility? Some baseband bought signal and detected the network operator name, but the message still says "Emergency Calls Only" and is unable to connect to a network.
I presume this problem arose when installing custom ROM from TWRP recovery and it messed up with efs partition?
I had successfully flashed custom ROM many times before without this problem. I think there's some next step to follow to bring back the working sim like I heard of installing modem. I did just try installing modem but same problem as my baseband is already bringing signal.
I had tested my phone from sim unlock app and found out that CSC is locked and it limited specified MCC and MNC numbers. Is this hindering connection to Indian mobile network? Or corrupt efs? Or missed to manually install something?
Bump.
Greetings, sharing here my particular problem from top to bottom just to take advice in general.
First of all, I live in Cuba, so my one and only network is Cubacel which runs GSM 900 mhz, so far so good with most phones.
I am between phones so I boorrowed this used J100h from a friend, which received it as a gift and has never been used. I performed a hard reset to wipe password, data, etc. Phone boots ok but no calls with cuban SIM.
The curious thing is that it does recognizes Cubacel network, it evens shows the changes on signal intensity. Bu when I try to manually add it, it finds and displays the network by its name, but reports an error when trying to register.
After 3 days of internet search I´ve narrowed to the following: I suspect the phone was unlocked or flashed previously, there is no network promo when turning on the phone but there is chinese rooting software installed and the cell is, or seems via root checker, rooted. Thought an extra /01 after the IMEI was a sign of corruption until I leraned about IMEI SV. Anyway, following this thought installed busybox and root explorer, checked efs folder, finding subfolders such as imei, factory app, etc, BUT NO .NV file. inside imei folder ther is a imeino1 file with the correct imei, but no .nv file outside. Is this fixable?? GSII repair doesnt work because seems theres is an error with the busy box install, what gives me doubts if the phone is really rooted, and if i need to be online to install busybox properly.
So, If I decide to try and flash stock rom and see if this fixes the problem here is my main doubt, which may seem obvious for some but i simply can figure out. Which stock rom version do I choose? the product code of the cell is ITV, and the bootloader also points to the italian version but the currently installed rom ends in AOG2, seemingly a greek version. I live in Cuba and everywhere I look people say that since the telephone is sim free you can install any rom, but the is no "any" or standard rom either in samsung firware o sammobile. Do I flash the same rom? do I flash the one matching the bootloader? Which stock rom version should I choose?
Very much appreciated if you have gone so far in this reading and have some piece of advice. Also excuse terrible English.
Hi !
I see plenty of firmwares on samsung website so pick one and see how it works , it doesn`t matter the region , you won`t damage anything , maybe the modifications that has been made on the device borked the network , clean stock firmware flash may resurrect it and try the one which matches the bootloader
You may have a look here as well https://forum.xda-developers.com/android/development/rom-gennxt-prerooted-stock-t3126368
Good luck !
Hello, I can't connect to my local mobile network anymore.
So I can't call or receive phone calls.
I am in Latvia, Baltic region.
My imei is legit and working, so is my phone number.
When I search for my mobile network it finds it -LV TELE2, easy, but when I attempt to connect to it, it shows it 'can't connect to this network try later', when of course the network is working properly for other phones., and it is the network that worked before.
I happened after I flashed a custom lineage rom. It was the right rom for my device,
and I flashed it in correct order and all worked except mobile networks.
I thought using odin to flash back the stock rom will fix it, but it didn't.
Now I am back to stock 7.0 , flashed csc SEB version for my region.
Now in mobile networks there is only Lte/2g/3g options, why there is no gsm or vcdma mobile service?
I believe my provider is gsm, so how to restore it so I could call again?
It shows no service in the drawer, and can't connect to my carrier.
Any help is greatly appreciated, thank you ^_^)/
Had same problem after my motherboard was changed in some mobile repair shop and old imei and stuff copied from old motherboard. After flashing stock 7.0 with ODIN, I had same problem. Luckily repair guy added some certs back free of charge. Something to do with not being official Samsung repair place and not having right kind of tool.
Sent from my SM-G920F using XDA-Developers Legacy app
Thank you for your info. Then it must be possible to fix it with the right tools even at home! I am sure there must be someone who knows how to do it and can help me, and many others with the same problem.
When you tap *#0011# imei status is OK or NG?
Hello, I typed *#0011# and yes imei status is ok, more info - rat=gsm (2g), band=pgsm900 and reg status is = not registered.
So this couldn't be an imei problem, could it?
During this time, I tried many roms, nougat and marshmallow, official and custom, but none has fixed it yet.
I was thinking, flashing original galaxy s6 lollipop rom will definitely do the trick,
because I remember I had a similar problem with my old galaxy s plus phone,
it was impossible to connect to any mobile network on any rom,
until I flashed the oldest stock rom for the device.
But the problem is, I can't find a working download for a custom lollipop rom, they are extinct it seems,
and the official lollipop rom can't be flashed with odin, obviously, because I have a higher fw already.
Official lollipop would be the best and would show if the problem is software related for once and for all,
but how to install it when knox and all kinds of binaries doesn't allow me to flash it with odin?
Is there another way to do it?
No need for this anymore, never solved the issue.
I sold the phone.
Thanks anyways ^-^)/
I recently bought a used Samsung Galaxy S10 (SM-G973F).
At first glance the phone was in excelent shape. The SIM Card was connecting to the mobile network, and calls, internet connection, etc was OK.
But then, I found out that the phone had been rooted. Probably, by the seller. In pannic, I rushed to unroot flashing the stock Rom.
Here what I did:
1- Forgot to check my precisly CSC code and assumed ZTA (cause I'm from Brazil, and the phone is from carrier "Claro")
2- Downloaded the stock rom using Frija
3- Using Odin 3.14.1 flashed the device.
The previous rooted system was on Android 10 and One UI 2.5. With this new rom went to Android 11 and One UI 3.0.
The problem:
The phone recognizes the SIM Card. But it simply doesn't connect to the network. When I try to make a call it says: " not registered on network"
The phone DO recgonizes the SIM Card. On the SIM Card Manager shows my carrier name (Vivo) and my phone number. Also, the SIM app is showing on the app list.
Things I tried:
Rebooting the phone
Changin the SIM Slot
Testing the SIM on another device to ensure it was working
Checked if the IMEI wasn't missing/undefined. It is not, the IMEI appears to be untouched
Checked if the IMEI had been blacklisted. It's not.
Flashed SEVERAL different stock ROMS with different CSC (ZTO, ZTA, ZVV)
Try to manually select the network. This also throws an error saying "error while searching for network"
I'm really desperate and don't know what to do anymore.
No one have a clue either? :C
Look inside here:
How to Fix 'Not Registered on Network' on Android
Here is how to fix 'Not Registered On Network' error on Android. Mostly error occurs on Samsung phones, but this solution works for all android phones.
www.android-recovery.net
Wow,
This is exactly like my S10 right now.
At first, all is good, the signal was great, all working well, except cant connect to samsung pass and samsung health because it was root.
then i brought to sellular shop service, to flash the phone.
Then, “not registered to network” happened. The signal ok, the phone able to read dual simcard, but “emergency call only” and if i try to search network manually, “error while searching for network”
And the sellular shop service have no idea how to fix after they reflashed and try to fix it for several days.
Have you found any solution to fix your pho?
pls advice…
itupini said:
I recently bought a used Samsung Galaxy S10 (SM-G973F).
At first glance the phone was in excelent shape. The SIM Card was connecting to the mobile network, and calls, internet connection, etc was OK.
But then, I found out that the phone had been rooted. Probably, by the seller. In pannic, I rushed to unroot flashing the stock Rom.
Here what I did:
1- Forgot to check my precisly CSC code and assumed ZTA (cause I'm from Brazil, and the phone is from carrier "Claro")
2- Downloaded the stock rom using Frija
3- Using Odin 3.14.1 flashed the device.
The previous rooted system was on Android 10 and One UI 2.5. With this new rom went to Android 11 and One UI 3.0.
The problem:
The phone recognizes the SIM Card. But it simply doesn't connect to the network. When I try to make a call it says: " not registered on network"
The phone DO recgonizes the SIM Card. On the SIM Card Manager shows my carrier name (Vivo) and my phone number. Also, the SIM app is showing on the app list.
Things I tried:
Rebooting the phone
Changin the SIM Slot
Testing the SIM on another device to ensure it was working
Checked if the IMEI wasn't missing/undefined. It is not, the IMEI appears to be untouched
Checked if the IMEI had been blacklisted. It's not.
Flashed SEVERAL different stock ROMS with different CSC (ZTO, ZTA, ZVV)
Try to manually select the network. This also throws an error saying "error while searching for network"
I'm really desperate and don't know what to do anymore.
Click to expand...
Click to collapse
So, were you able to find a solution for this problem? I also bought a Note 9 N960F/DS recently and found out it was actually a N960N model that was changed to N960F/DS. So I did exactly what you did, I flashed the original stock rom, N960N, but now phone will not connect to network. I also did hard reset, reflash other stock roms, nothing changed. Anybody with insight should please give us some pointers.