Can i lock.the gpu frequency - Sony Xperia L

my gpu always drop to 198 or 320mhz does there anyway to.lock at 400 using thunderzap
Sent from my C2105 using Tapatalk

SecretVamp said:
my gpu always drop to 198 or 320mhz does there anyway to.lock at 400 using thunderzap
Sent from my C2105 using Tapatalk
Click to expand...
Click to collapse
Well locking it to 400 will increase power consumption as not always it is needed that much.
It goes down but the maximum limit remains 400. So I believe you should keep it like that only.

You can set the minimum frequency to 400 mHz with Trickster MOD or No-frills CPU Control.
I don't know why you would be doing this, as you will only squeeze the juice out of your battery faster this way.

okay thx actually i juz wana make ppsspp more playable
Sent from my C2105 using Tapatalk

SecretVamp said:
okay thx actually i juz wana make ppsspp more playable
Sent from my C2105 using Tapatalk
Click to expand...
Click to collapse
Set gpu governerr to "Performance"
Sent from my C2104 using Tapatalk

Related

[Q] Overclocking

Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
I don't feel it really speeds up the phone too much and if you compared a phone with 900 MHz processor as standard with our phone overclocked to 900 MHz processor, the standard 900 MHz processor would be a lot faster. I hope this makes sense. I didn't explain it very well.
For example, compare a HTC desire to our phone overclocked to 1 GHz. The HTC would still be a million times faster.
Anyway, a non-overclocked phone is still quite smooth and i have no problems with it. If you want to overclock, you will get a nice little boost but not a really big boost.
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
You should set your main profile to max of 800 as its the safest for your cpu although i overclock to 1366/1400 when im gaming . Its faster than not overclocking(for daily usage for me not sure abt other people)
Sent from my GT-i5801 using XDA App
Thanx alot both of you I really appreciate it
Sent from my GT-I5800 using XDA App
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Ganoess said:
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
667 is not overclocking
Sent from my GT-i5801 using XDA App
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
g-a-a said:
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
bscraze said:
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
Click to expand...
Click to collapse
Thank you my friend!
Sent from my GT-I5800

Does overclock to 1.3 Ghz makes any sense?

I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
TheSG said:
I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
geekynoob said:
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
Click to expand...
Click to collapse
I overclocked to 1.3 ghz by uc kernel.
I wanna ask that at 1.3 is it safe for daily use becoz its quite high.
Sent from my GT-I9003 using xda premium
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
No one will recommend to fix max 1.3Ghz. Cause it may over heat your phone due to it is over clock.
Ofcause, this shorten you phone life.
Sent from my GT-I9003 using Tapatalk
TheSG said:
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
ofcrs..it will...
ur emmc chip may burn out..
stay in limits.. 1ghz is enough i suppose..
but yea occassionally 1.2 dats it..!
cheers..
I m back to 1 ghz .
Sent from my GT-I9003 using xda premium
Better be on 1Ghz as default. And when multitasking or playing games, OVERCLOCK!! But 1.2 maxx..
And TI OMAP's are powerfull enough,can resist overclocking.
And moreover 1.2 is standart overclocking for our OMAP.
Sent from my GT-I9003 CM9
Be on one ghz...
Seriously didnt fell any diff........
its ma opinion..use custom kernal....
on demand..
nd make a profile....when screen gets off...set cpu max to 800 min to 300..nd same while charging..saves battery
Guys, try below combination
governor : lionheart
I/O scheduler : sio
you will fell it.

[Q] How can i UC/UV?

Can someone give me a tutorial on how to undervolt/underclock so the phone does not nned so much battery? Does it even bring so much?
I have NeoROM and artdat 1.7b2 installed.
Thank you , Birki.
Birki96 said:
Can someone give me a tutorial on how to undervolt/underclock so the phone does not nned so much battery? Does it even bring so much?
I have NeoROM and artdat 1.7b2 installed.
Thank you , Birki.
Click to expand...
Click to collapse
Using setcpu is the easiest way. You can also define profiles and change as and when you like
It can do both uc and uv...
Sent from my GT-I9103 using Tapatalk 2
ok but what are good voltages and frequencys?
Sent from my GT-I9103 using xda premium
Birki96 said:
ok but what are good voltages and frequencys?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
i cant say about the voltages, but you can set the frequency to your usage...
i suggest you use 760 as max voltage with the power saving mode...
Be careful while adjusting voltages, i have read some where that if you are giving less voltage values it may brick you phone also.
Regarding Frequency: i am using as below
on Boot Max 1200 and Min 1000.
while Screen off Max 456 Min and 312 priority 75.
While battery greater than 75 % Max 1200 and Min 1200 Priority 50.
I am getting battery around 1.5 to 2 days..
thank you
so uv is not good?
Sent from my GT-I9103 using xda premium
but it saves more energy doesnt it?
Sent from my GT-I9103 using xda premium
Birki96 said:
but it saves more energy doesnt it?
Click to expand...
Click to collapse
Yes it saves but there is also risk involved init....
Birki96 said:
thank you
so uv is not good?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
UV will give you lots of unsability, so lots of reboots and hangs. It will NOT save much energy. All the few energy that you can save you will waste it double or more rebooting. Check bedalus report about undervolting in the Nexus S General forum.
---------- Post added at 05:04 PM ---------- Previous post was at 05:01 PM ----------
You maybe want to try underclocking 200 MHz or so, at stock voltages, this yes could give you some extra battery life.

frequency

what is the best frequency to use for galaxy fit on cm10?
11
Sent from my GT-S5670 using Tapatalk 2
djozaa said:
11
Sent from my GT-S5670 using Tapatalk 2
Click to expand...
Click to collapse
???
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
Moved to Q&A. Please ask all questions there, thanks.
bokipale said:
what is the best frequency to use for galaxy fit on cm10?
Click to expand...
Click to collapse
Hi,
The best frequency is the normal Frequency, it looks like:
Max 604MHz
Min 122MHz
Conservative (for DeepSleep)
if you think, its ok that the phone damages a littlebit everyday, you can use this:
Max 806MHz
Min 122 or 245MHz
Yeah, I prefer a frequency which is not over 750MHz and not under 604MHz... It'll not damage your phone so hard.
My special Tip: Use Adrenaline Engine 4.3 CM or SlaidyBoost. Then it's quick like a hell.
Greetings.
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
TheRealFelix0212 said:
Hi,
The best frequency is the normal Frequency, it looks like:
Max 604MHz
Min 122MHz
Conservative (for DeepSleep)
if you think, its ok that the phone damages a littlebit everyday, you can use this:
Max 806MHz
Min 122 or 245MHz
Yeah, I prefer a frequency which is not over 750MHz and not under 604MHz... It'll not damage your phone so hard.
My special Tip: Use Adrenaline Engine 4.3 CM or SlaidyBoost. Then it's quick like a hell.
Greetings.
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
Click to expand...
Click to collapse
thank you so much!

Jellybean quick lag fix for games

Go to settings> display and untick auto adjust screen tone.
All the games run perfectly now!
Can I propose you to collaborate with Kyrillos13 in his thread? You could create a table with issues and fixes found for them in leaked JB. Then we would have issues and fixes in one place.
Anyway regarding lag-fix: I confirm, that it works for Modern Combat series.
Oh yeah im gonna flash JB 2morro .. Thanks to u !
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Doesn't work, Temple Run 2 still lags.
Sent from my GT-I8160 using xda app-developers app
malamharian said:
Doesn't work, Temple Run 2 still lags.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Have u set ur CPU 800 / 800 using NoFrills CPU?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
It seems to be a problem with that toogle too, it might be unticked but it is ztill on, experience with it and you'll get it right.
Sent from my GT-I8160 using xda app-developers app
Yes... Yes .....
The 3D graphics change in AnTuTu from : 733 to 2062
Rikxzdjz said:
Have u set ur CPU 800 / 800 using NoFrills CPU?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Click to expand...
Click to collapse
how to set no frills cpu to 800? mine is when i tried to 800 the max and 200 the min.. when i apply it it says that 400 max 200 min.. how to fix this?
Turn off power saving in settinga.
Sent from my GT-I8160 using xda app-developers app
heml0ck said:
how to set no frills cpu to 800? mine is when i tried to 800 the max and 200 the min.. when i apply it it says that 400 max 200 min.. how to fix this?
Click to expand...
Click to collapse
have you turn off the cpu power saving on settings> power saving mode?
It will change the max from 400 to 800
gumball3000 said:
Turn off power saving in settinga.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
what is your governor? and i/o? thanks in advance man..
raf1987 said:
have you turn off the cpu power saving on settings> power saving mode?
It will change the max from 400 to 800
Click to expand...
Click to collapse
Yes with the cpu power saving the max cpu is 400 and the phone works very very slow.
Did you reduce temple run quality?
Sent from my GT-I8160 using xda app-developers app
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Rikxzdjz said:
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Try ondemand cpu governor
Sent from my Galaxy Ace 2 i8160
Rikxzdjz said:
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Use no-frills app to make it 200
There's no governor
Sent from my GT-I8160 using xda premium
That's I/O scheduler. Governor is bit higher. and it is ondemand already
Akhh damn..
Sent from my GT-I8160 using xda premium
Hi guys, is this for rooted jb ore not? Can i use no frils cpu on not rooted? I got today official jb update with kies, phone forks fine, but i have lag on games.

Categories

Resources