Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
I don't feel it really speeds up the phone too much and if you compared a phone with 900 MHz processor as standard with our phone overclocked to 900 MHz processor, the standard 900 MHz processor would be a lot faster. I hope this makes sense. I didn't explain it very well.
For example, compare a HTC desire to our phone overclocked to 1 GHz. The HTC would still be a million times faster.
Anyway, a non-overclocked phone is still quite smooth and i have no problems with it. If you want to overclock, you will get a nice little boost but not a really big boost.
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
You should set your main profile to max of 800 as its the safest for your cpu although i overclock to 1366/1400 when im gaming . Its faster than not overclocking(for daily usage for me not sure abt other people)
Sent from my GT-i5801 using XDA App
Thanx alot both of you I really appreciate it
Sent from my GT-I5800 using XDA App
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Ganoess said:
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
667 is not overclocking
Sent from my GT-i5801 using XDA App
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
g-a-a said:
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
bscraze said:
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
Click to expand...
Click to collapse
Thank you my friend!
Sent from my GT-I5800
Related
can anyone recommend "the best" overclocking app for x10?
not sure if it matters, but im running [Cyanogen6.1.3]gingerbread[v01]
X10 cannot be overclocked yet.
Sent from my X10i using XDA App
You can use setcpu but it wont overclock. We need custom kernel. So farr there's no custom kernel for x10.
But you can use setcpu to reduce the screenoff MHz. It might help to save more battery.
Sent from my X10i using XDA Premium App
I wonder if it can underclock why it cant overclock whit Setcpu? ;o
Sent from my X10i using XDA Premium App
shahkam said:
I wonder if it can underclock why it cant overclock whit Setcpu? ;o
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
because you need a custom kernel to increase the possible range of values... the underclocking value is already within the range of possible values
wai10691 said:
You can use setcpu but it wont overclock. We need custom kernel. So farr there's no custom kernel for x10.
But you can use setcpu to reduce the screenoff MHz. It might help to save more battery.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
there is one, but it still gets developed.
you can download and test it, but there is no fully working one out yet
PoTi_96 said:
there is one, but it still gets developed.
you can download and test it, but there is no fully working one out yet
Click to expand...
Click to collapse
Problem is that it is not usable yet.
Sent from my X10i using XDA App
... And as on any phone overclock thread, never forget our devices are NOT AT ALL intented to do overclock.
Carefully check our CPU's internals, because you will probably make your phone very hot, unstable, battery sucker and useless - it will self-stops because of overheat.
Or try in your fridge, in North Pole, or build a watercooling system.
Did I mention your phone won't be as mobile as before ?
Just kidding, but seriously guys, overclocking phones is useless today. Few years ago, it was nice (as we got very low frequency), but now we have very powerful devices... Don't expect to overclock as you do with Core i7 or Pentium IV...
Would it work if i would be on baseband .58 which is the newest?
Sent from my X10i using XDA Premium App
shahkam said:
Would it work if i would be on baseband .58 which is the newest?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
the baseband is just the radio of the phone, it has NOTHING to do with overclocking...
the kernel is what controls that
hmmm no overclocking available till custom kernel can be booted man
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
moshe22 said:
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
You have to have a kernel that allows overclocking.
moshe22 said:
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Are you using a custom kernel??
If you are use pimp my cpu to oc
G2X
Also, in case you didnt know.. Kernels may state 1.5Ghz and such but that doesnt mean YOUR phone will be able to go that high. Every device is different so every device's has a different max frequency.
Set CPU currently doesn't work with out kernels. You must install one of the OC/UV kernels from the development section and use the pimp my cpu app to overclock
Sent from my LG-P999 using XDA App
Ok, that makes sense I'm using the EB 1.04F trinity kernel +48 and was using pimp my cpu and I can overclock just fine there but I wanted to try out setcpu out.
I have it over clocked @ 1.2 -50 in all frequencies and scheduler is the default one. Force Min Frequency is checked as well.
Thanks
Sent from my LG-P999 using XDA App
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
crx4xharder said:
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Over clock is good for overall performance.
Sent from my LG-P999 using XDA App
crx4xharder said:
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
On the mt4g I was able to play dungeon defenders OCed at 1.5 without much lag. Without it the game was almost unplayable because it would lag like crazy when the graphics got too intense. But on the downside it sucked my battery dry within hours
Sent from my Xoom using XDA Premium App
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Sooooo you over clocked to it to 1.5, but yet you still need to find a way to do it?? Read..... all the answers are in this very section....
Oh by the way wrong section to post.
Sent from the fifth dimension...
rafarataneneces said:
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
ok first set cpu will not be able to oc for you. use pimp my cpu you should be able to find it if you do a search. second if you want to oc use faux's kernel for that.
rafarataneneces said:
Quadrant I got 3000 points with 1.5Ghz
Click to expand...
Click to collapse
4500 with faux rom 1.2.4 and 0.2.2 kernel.
Sent from my LG-P999 using XDA App
I used SetCPU before on my OptimusT, and it was actually working pretty good, BUT NOT ON LGE STAR. For now, the best overlocking app for LGE STAR is PimpMyCPU WITH CUSTOMIZED KERNEL.
With FR and Faux's kernel, you can easily get 4000+ on Quadrant.
With GB and its own kernel, I think we just get like 3000+
Sent from my LG-P999 using XDA Premium App
Oh 1 more thing, T-mobile doesn't release the GB update for LGE Star yet. The CM project is built based on the GB source code only...
Sent from my LG-P999 using XDA Premium App
Use pimp my cpu, setcpu doesn't let you overclock. It only shows your cpu speed but nothing else.
Sent from my G2x
Thread moved to proper forum.
rafarataneneces said:
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
I got 4094 in quadrant OCed to 1.5Ghz on Ultimate, very impressive considering its a froyo rom nonetheless
Sent from my NookColor using XDA Premium App
rafarataneneces said:
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
I thoroughly tested OC on CM with different kernels. I got the best results with the Trinity kernel. My highest recorded Quadrant score was 4920 and I averaged 4690 over 10 trials with that configuration.
http://forum.xda-developers.com/showthread.php?t=1078049&highlight=trinity
Hi,
Can i ov the infuse gingerbread more than 1.6ghz, with froyo the maximum is 1.8ghz.
Thank in advance
Sent from my SAMSUNG-SGH-I997R using XDA App
No kernel supports higher than 1.6ghz at the moment
Sent from my SAMSUNG-SGH-I997 using XDA App
I would like try 1.8 or maybe 2, i hope soon,
Sent from my SAMSUNG-SGH-I997R using XDA App
martinjo24 said:
I would like try 1.8 or maybe 2, i hope soon,
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
U cant go past 1.6 ghz. The 1.8 ghz kernel is not really 1.8. Bedwa had his calculation wrong so the 1.8 kernel is more like 1.5ghz
Sent from my SAMSUNG-SGH-I997 using XDA App
martinjo24 said:
Hi,
Can i ov the infuse gingerbread more than 1.6ghz, with froyo the maximum is 1.8ghz.
Thank in advance
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
No, with Froyo or ANY kernel on our device the max without bus overclocking is 1.6 GHz. It is a solid physical hardware limitation. Anyone who claims otherwise misread the processor manual or made a mistake in their PLL settings calculations (which bedwa did with Infusion and he admitted to his mistake - if you had bothered to read the Infusion thread you would know this.)
With bus overclocking some people hit 1664 MHz, but most people had incredibly unstable devices there. It's a LOT harder to bus-overclock a device than multiplier-overclock the CPU core.
I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
TheSG said:
I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
geekynoob said:
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
Click to expand...
Click to collapse
I overclocked to 1.3 ghz by uc kernel.
I wanna ask that at 1.3 is it safe for daily use becoz its quite high.
Sent from my GT-I9003 using xda premium
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
No one will recommend to fix max 1.3Ghz. Cause it may over heat your phone due to it is over clock.
Ofcause, this shorten you phone life.
Sent from my GT-I9003 using Tapatalk
TheSG said:
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
ofcrs..it will...
ur emmc chip may burn out..
stay in limits.. 1ghz is enough i suppose..
but yea occassionally 1.2 dats it..!
cheers..
I m back to 1 ghz .
Sent from my GT-I9003 using xda premium
Better be on 1Ghz as default. And when multitasking or playing games, OVERCLOCK!! But 1.2 maxx..
And TI OMAP's are powerfull enough,can resist overclocking.
And moreover 1.2 is standart overclocking for our OMAP.
Sent from my GT-I9003 CM9
Be on one ghz...
Seriously didnt fell any diff........
its ma opinion..use custom kernal....
on demand..
nd make a profile....when screen gets off...set cpu max to 800 min to 300..nd same while charging..saves battery
Guys, try below combination
governor : lionheart
I/O scheduler : sio
you will fell it.