Hello there
Ive got a problem. I wanted to Root my SL101 (Firmware 4.0.3 Android) with Peri or THe 1 Click Solution. But the original usb cable only charged my device when I plugged in to power socket. BUt USB on PC didnt work. PC never found device, didnt search for driver and no "BLing" for USB device plugged in. So I ordered a new usb cable (not original, cause asus sl101 already 3 years old). The new cable worked. USB found on PC. Data transfer worked. Charinging over power socket worked, but no charging when connected to pc. When I enabled USB Debugging, it said "Device removed" and then "device started". But there was no deivce seen on computer. No "internal storage". So there is no possibility to transfer data and Root won't start cause it doesnt find device. I installed all driver (ADB driver, also tried Asus Pc Suite), but it doesnt work. Is my device broken or is it because of the cables? Are there any working cables on internet with better quality and supporting USB Debugging? The non original cable is from vhbw.
Is this a common problem with Asus Sl101? I searched for related problems. SOmeone also had problems with Asus original cable. It also charged plugged in to power socket but not with PC and Pc never fund USB conection, never searched for drivers. He ordered a new cable (original, cause his case was years ago) and it worked.
Any ideas how to get it work? Its not really important to root it though, but I wanted to buy Titanium Backup so I can save my apps, and I need root for it. There are f course plenty other apps needing root. Any advices?
Not sure about the data transfer error apart from lack of drivers, but the PC will not charge the tablet while it is running - at least for the TF101 anyway, the only way to get the PC to charge it is to either turn it off while its plugged into the PC and leave it overnight for trickle charge, or I think also if the tablet is in sleep mode, it will also trickle charge - but you have to use the main charger to get a fast charge into it - PC will only trickle charge
*Detection* said:
Not sure about the data transfer error apart from lack of drivers, but the PC will not charge the tablet while it is running - at least for the TF101 anyway, the only way to get the PC to charge it is to either turn it off while its plugged into the PC and leave it overnight for trickle charge, or I think also if the tablet is in sleep mode, it will also trickle charge - but you have to use the main charger to get a fast charge into it - PC will only trickle charge
Click to expand...
Click to collapse
First of all, thanks for answering. I tried it, but when I plug in USB, Asus SL101 turns on. I won't charge turned off. It turns on automatically when I plug in USB to charge. And when its turned on plugged in on PC USB, as I explained before, it won't charge.
Somene know where I can get a working cable? Maybe an original working one? Asus SL 101 is maybe 2 or 3 years old know. Shouldnt there be still original ones left in shops? Actually it doesnt have to be an original one. A working one is fine, too. (Working means for me: USB, Charging, USB Debugging). So anyone knows good stores/internet offers (amazon, ebay...) for sl101 cables? Cause I really dont know which one is a good one.
Plug it in to USB and then turn it off, you won't see it charging, it is a very very slow process when you charge from PC (If it works the same as the TF101) - leave it overnight plugged in and turned off
Sounds like your cable is working fine, you get a data connection with USB debugging - so data side of the cable works, and you get a charge when you plug it into the charger, so power side of it is working too
It's likely drivers stopping you using the media transfer mode
eBay would probably be your best bet if you want another one
asusparts.eu sell some stuff too - fits SL101
http://www.asusparts.eu/en/Asus-KIT-AC-TF101
Ya actually I didnt want to complain. The cable really works fine, but I cant root cause USB Debugging Mode is found by PC, but showing no storage icons on computer. So Root Software dont find device and no data transfer works while it is in debugging mode. Could it be because of my device? Actually it was from germany and the firmware also was DE. But for updates, I had to change it to WW code. Maybe its cause of firmware. I really dont know. Its strange cause for everyone it works, only for me it doesnt work. So original cable was to begin with not working on usb pc. So I hoped the fake one would work full. *sigh*
Thanks for the link. I searched for only the cable (on the given link) and I found it without adapter. But its a pity, Im in germany and if they send the cable to me, I have to pay 46$ for the cable. For US people its 25$ (cause they dont have to pay oversea sending costs). If its also not working, so it would be a problem.. even warranty is expensive (sending back ~20$).
Is there a way to downgrade SL101 from 4.0.3 to Firmware Version 3.2 without using USB Debugging and root?
Case closed, Watson (I always wanted to say that)
I found the error. The cable is working now and USB Debugging working, too. Root was successful. I opened device manager and deleted Asus Epad Sl101 driver and plugged sl101 in. So windows had to search for drivers and it installed the right drivers. I dont know why preinstalled ADB Drivers didnt work, but now everything works.
Thanks for your effort
Great, yea sounded like a driver problem, pleased you got it working :good:
Related
Hey folks,
I've been having a hell of a time getting my tf to connect to the pc via usb these last few days. No matter what I do it will not connect to any pc.
Drivers are installed fine and worked great in the past. The usb cable works fine with the charger and devices charges fine.
If I plug the USB into the pc and then into the TF the screen turns on, so it knows its there but refuses to allow communication between pc and tf on any computer I try.
In device settings USB tethering is greyed out and no matter what I try I cannot get it to allow me to turn it on. Shutdown, held button to reset, restarted pc's, notta.
I recently used NVFLASH to unroot my TF for an RMA that I never got around to doing. Now I want to root again but without the USB working I can't.
Any help would be greatly appreciated.
No one else is experiencing this? Is my cord mucked? If so why does it still work for charging? Eeeeek! I'm freaking out here.
Sent from my Transformer TF101 using Tapatalk
Is usb debugging turned on in the tf settings->application->development?
I have no idea what you're talking about with usb tethering in the settings...
Is the device being recognized by your pc? What operating system?
USB Tethering is greyed out on all TF's. If for sharing data service with another device and you dont have data service on the TF unless you have a dongle.
Have you tried putting into APX and checking. You don't boot the rom when using nvflash. Power / Vol + when booting
Yes, if you think about it Tethering is when you wish to pass your 3G connection be that either through SIM card or Dongle to another device.
If you don't have either a SIM Card with Data services (which you won't have) or a Dongle then it is only correct the Tethering option will remain greyed out.
Hey and thanks folks.
Neither of my PC's will detect my TF but both did just a few weeks ago.
Asus sync won't work either. In accounts/sync Asus sync is off and there is no way to turn it on. Don't know if this is normal or not.
I have USB debugging on but still it won't get detected. Restarted everything multiple times too.
I cannot enter apx mode however I had no trouble doing so before.
Like I said above i can still charge with my cord just no PC connectivity so I don't understand what's up.
As for USB tethering, when USB is plugged in it should allow me to select it (even though I don't want to) thus why I think the problem is related to the pad or cord not the PCs.
Thoughts?
Sent from my Transformer TF101 using Tapatalk
This is not only annoying but it gets more and more confusing. I can connect my other Android devices to a PC and move files between the devices. I should be able to do the same with the Transformer and a PC.
igot6strings said:
Hey and thanks folks.
Neither of my PC's will detect my TF but both did just a few weeks ago.
Asus sync won't work either. In accounts/sync Asus sync is off and there is no way to turn it on. Don't know if this is normal or not.
I have USB debugging on but still it won't get detected. Restarted everything multiple times too.
I cannot enter apx mode however I had no trouble doing so before.
Like I said above i can still charge with my cord just no PC connectivity so I don't understand what's up.
As for USB tethering, when USB is plugged in it should allow me to select it (even though I don't want to) thus why I think the problem is related to the pad or cord not the PCs.
Thoughts?
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Try new cable,the charging uses other pins/wires in the cable
Already ordered from ncix. Hopefully that's it or I'm out $45 with shipping.
Sent from my Transformer TF101 using Tapatalk
Usb tethering is for sharing the data service on your TF. If you dont have 3g/4g service on your TF then it will not be available. Do you have a conflict listed in your device manager? I have had to reinstall the Asus suite twice at this point and manually remove the drivers from device manager
Sent from my Transformer TF101 using xda premium
Well...my wife's transformer is incredibly slow and she is giving me permission finally to root it. However I have had difficulty doing so because the charging/interface port on the tablet has issues. A while ago the port stopped charging the tablet. We have multiple chargers for that tablet and nothing will charge it via that port. The only way she can charge it is by plugging it into the keyboard dock and charging the dock. Therefore when I try to plug the tablet into the computer so that I can forego the root process the computer will not recognize it.
So my question is.....can this tablet be rooted by downloading files to it and not need a tablet to PC interface? Or, can the tablet be plugged into the dock and interface with the PC somehow? I looked through all the rooting methods I could find and all of them required a tablet to PC interface.
Unfortunately you need a computer USB connection to root it. There was only 1 firmware (8.6.5.19) that could be rooted without a PC. In order to downgrade, you need a computer as well.
I have been able to root mine using the dock charging port. I just booted to APX mode (VOL UP and POWER).
I wrote a guide on how to root here: http://www.transformerforums.com/fo...t/31927-frederuco-s-guide-root-rom-tf101.html
If the dock is charging the tablet surely the issue must be with charger/cable ive had issues with tf101 cable before, mine would slow charge at rate that was bearly noticable, and the tablet didn't show a charging icon, but the cable did allow a data connection still. If infact it is your tf101 thats the issue root will be out of the question but i belive the stock kernel can be overclocked with an overclocking app which might help a bit.
JoinTheRealms said:
If the dock is charging the tablet surely the issue must be with charger/cable ive had issues with tf101 cable before, mine would slow charge at rate that was bearly noticable, and the tablet didn't show a charging icon, but the cable did allow a data connection still. If infact it is your tf101 thats the issue root will be out of the question but i belive the stock kernel can be overclocked with an overclocking app which might help a bit.
Click to expand...
Click to collapse
One would think cause that is the most logical explanation. However, I have tried 3 cables (one the original and other 2 brand new ones) and 2 different OEM power supplies and one that I made which has the proper output ratings and none will charge the tablet. However, all of them will charge the dock. The only way to get the tablet to charge is by plugging into the dock. I know it uses the same port and I am clueless as to why one charges and the other doesn't on the same port. All I know is that is what is going on.
The only problem I ever had with flashing while docked was flashing Ubuntu. But I always flash while docked, so that shouldn't be an issue.
I just flashed back to stock, then re-rooted (wanted a TWRP backup of rooted stock) using the OEM cable via the dock charging port.
No issues here.
Hi!
Got my Note yesterday, now I got a problem, again. I can't get it work on USB 3.0 no matter what I do (I'm sure about this but I ask this anyway: am I right that SM-P905 have USB 3.0?)
Okay, to the problem:
When connected to USB 3.0 I don't have option to choose USB 3, I only got MTP and PTP
- I updated Kies 3
- I reinstalled drivers (from Kies)
- I have 2 USB 3.0 ports on my PC so not so many to test but:
USB 3.0 works on my Note 3 (SM-N9005) on both USB-ports, It also works well with my Note Pro USB-cable
Note Pro doesn't work (don't give even option to choose USB 3 mode) on any of these two ports. I also tried both ports using my Note 3 USB-cable, but still no luck
So any ideas?
ps. I got ASUS motherboard and I found out someones having similar problems with their Android devices. Reason was ASUS Ai Charger -utility, but I don't have that one never ever istalled on my PC. Oooh, and one more thing, I'm using Win 7 Home Premium (x64)
---------------------------------------------------------------------
Updating BIOS and reinstalling Windows did the trick, now it works like it should
What exactly makes you say it doesn't work? Are you completely unable to transfer data to/from the tablet to a PC, are you not seeing a difference between transfer speeds using a USB 2.0 cable vs a 3.0 cable, OR is the appearance of everything working there but you are wanting the USB 3.0 nag screen to pop up to give you an indication that you're indeed using USB 3.0 ?
muzzy996 said:
What exactly makes you say it doesn't work? Are you completely unable to transfer data to/from the tablet to a PC, are you not seeing a difference between transfer speeds using a USB 2.0 cable vs a 3.0 cable, OR is the appearance of everything working there but you are wanting the USB 3.0 nag screen to pop up to give you an indication that you're indeed using USB 3.0 ?
Click to expand...
Click to collapse
When I connect Note to PC USB 3.0 port, pull down notification bar and click USB notification, I get ONLY option to use MTP or PTP. USB 3.0 is not listed there as option. I also transferred about <10Gb size file to Note and it took about 50min, which really is loooooong time..
Okay, here is screenshot about what I meant. Can you please say how it's in your tablet.
Spere said:
Okay, here is screenshot about what I meant. Can you please say how it's in your tablet.
Click to expand...
Click to collapse
Same - Mine connects MTP and I can see it and transfer files but on my tablet I get a Icon in the top tray that says connected to USB 3.0
Same here, when I'm getting a USB 3.0 connection to my PC I'll get the 3.0 indication in the notification screen.
I can't get 3.0 to work with my rMBP but it works with my Windows 7 based workstation and I can definitely see an increase in file transfer speed to the tablet when the USB 3.0 cable is used in a USB 3.0 port. Just did a test from a hard drive on my PC to the tablet, 2.1GB file transferred to internal memory on the Note Pro in 1:18 using a USB 2.0 cable and 0:48 using the stock USB 3.0 cable so I'm getting about 45mb/s with 3.0 and 27mb/s with 2.0.
Okay thanks. Tomorrow I'll check again if notification bar shows USB 3 or not, can't remember right now (still got thought that not). I'll get back here and tell if it's working or not.
EDIT: Yup, no USB 3.0 connection, in notifiction area there is that standard USB icon and it's not saying 3.0
EDIT2: Is there some way to find out if Note charges using USB 3.0? Shouldn't the 3.0 be a lot faster on recharging than 2.0, but how I can know which one it uses?
Sent from my SM-N9005 using XDA Premium HD app
Okay, back to subject..
Does USB 3.0 affect anyway to charging speed? Like if I use stock wall charger with 2.0 or 3.0 cable?
What's your charging speed? I did test and from 50% to 55% it took 15 minutes and from 50% to 65% 45 minutes (which makes average 5%/15min)
To charge I used stock wall charger and stock USB 3.0 cable. I didn't use my NP while charging and mobile data / wifi was OFF
Can you please check how fast is your Note Pro to charge? I still can't make my note to work on 3.0 mode when connected to my PC and I'm trying to find is the problem on my PC or Note before sending this to repair
How about trying Gsam Battery Monitor and observing the charging characteristics that way. It will give you charging current.
muzzy996 said:
How about trying Gsam Battery Monitor and observing the charging characteristics that way. It will give you charging current.
Click to expand...
Click to collapse
With wall charher charging current is 1900mAh, which is normal I think.
Now, if I plug my NP to my computers USB 3.0 port, I get BSOD --> PC reboots and I plug again --> now it works, but still not on USB 3.0 mode. So it could be with drivers or something, tried again install device drivers with Kies 3 but no luck. What could I do? I don't have skills to remove all the drivers and start from clean table (any other way than formatting my pc and that's not gonna happer for a while )
Any ideas?
Okay, just tried with laptop (Win 8.1) and my NP is ok, it connected using USB 3.0.
Now what, if my external HDD and Note 3 works on my own PC via 3.0, what I can do to make my Note Pro work also??
Problem have to be with drivers or something..
Mine doesn't show the "Use USB3.0" option that my Note 3 shows, but it clearly says "Connected as a media device via USB3.0" in the notification bar. (See attached screnshot)
Also, it just copied 1.03GB in 16 seconds from my laptop to my NotePro.
Clearly they removed the USB 3.0 setting from the menu, and it is now done automatically.
Spere said:
Okay, just tried with laptop (Win 8.1) and my NP is ok, it connected using USB 3.0.
Now what, if my external HDD and Note 3 works on my own PC via 3.0, what I can do to make my Note Pro work also??
Problem have to be with drivers or something..
Click to expand...
Click to collapse
I'd start with USBDEVIEW. Google it. Run that with no android devices connected to the PC. Uninstall all drivers related to any android device and reboot the computer. Then try again.
If that doesn't work, consider repeating that, rebooting and then updating the chipset drivers for your motherboard.
After that, I'm out of ideas.
Us Mac users have the same issue; the tablet is simply not recognized as a USB 3.0 device on my rMBP which is running Mavericks. It doesn't matter if I'm running windows as a virtual machine in VMWare Fusion or not so I'm thinking its at the driver level of Mavericks.
Sent from my SM-P900 using Tapatalk
ShadowLea said:
Mine doesn't show the "Use USB3.0" option that my Note 3 shows, but it clearly says "Connected as a media device via USB3.0" in the notification bar. (See attached screnshot)
Also, it just copied 1.03GB in 16 seconds from my laptop to my NotePro.
Clearly they removed the USB 3.0 setting from the menu, and it is now done automatically.
Click to expand...
Click to collapse
I copied 1.42GB file from my USB 3.0 HD to my ext. card - that took 5:52.
I just can't get 3.0 connection to work with NP (see attachment), Note 3 works fine.
muzzy996 said:
I'd start with USBDEVIEW. Google it. Run that with no android devices connected to the PC. Uninstall all drivers related to any android device and reboot the computer. Then try again.
If that doesn't work, consider repeating that, rebooting and then updating the chipset drivers for your motherboard.
After that, I'm out of ideas.
Us Mac users have the same issue; the tablet is simply not recognized as a USB 3.0 device on my rMBP which is running Mavericks. It doesn't matter if I'm running windows as a virtual machine in VMWare Fusion or not so I'm thinking its at the driver level of Mavericks.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
Thank you for help. I uninstalled all drivers related to Android and/or Samsung, restarted my PC, connected NP and still not working. At this point I restarted computer again but that didn't help either... Where the heck can that problem be?
I also tried killing all processes that I knew I can safely kill from my PC (In hope if some program/process is doing harm for USB 3.0 connection) but no luck..
Spere said:
I copied 1.42GB file from my USB 3.0 HD to my ext. card - that took 5:52.
I just can't get 3.0 connection to work with NP (see attachment), Note 3 works fine.
Thank you for help. I uninstalled all drivers related to Android and/or Samsung, restarted my PC, connected NP and still not working. At this point I restarted computer again but that didn't help either... Where the heck can that problem be?
I also tried killing all processes that I knew I can safely kill from my PC (In hope if some program/process is doing harm for USB 3.0 connection) but no luck..
Click to expand...
Click to collapse
Hm.... Have you updated your PC's USB3.0 drivers? Have you tried using the Note 3 cable?
ShadowLea said:
Hm.... Have you updated your PC's USB3.0 drivers? Have you tried using the Note 3 cable?
Click to expand...
Click to collapse
I updated them twice, just to be sure. I got 2x USB 3.0 ports on my PC.
My external HD and Note 3 works well with both of them. And Note 3 also works with NP 12.2 cable.
Just my NP wont work no matter which port or cable I use.
On my friends laptop NP 12.2 with the cable that came in the box works well, immediately connects as 3.0 device.
I think I'll quit with this. Don't have the knowledge find out where the problem is.. I thought maby BIOS update might help, but since everything else works fine, I wont do that because the risk of totally f*** up my computer.
But if anyone here got any other/more ideas, I'm listening
Spere said:
I updated them twice, just to be sure. I got 2x USB 3.0 ports on my PC.
My external HD and Note 3 works well with both of them. And Note 3 also works with NP 12.2 cable.
Just my NP wont work no matter which port or cable I use.
On my friends laptop NP 12.2 with the cable that came in the box works well, immediately connects as 3.0 device.
I think I'll quit with this. Don't have the knowledge find out where the problem is.. I thought maby BIOS update might help, but since everything else works fine, I wont do that because the risk of totally f*** up my computer.
But if anyone here got any other/more ideas, I'm listening
Click to expand...
Click to collapse
You said you had an ASUS motherboard, right? I'd go ahead and update the BIOS, it's pretty fool proof with the newer ones (which you have USB3.0, so it's a safe assumption that it's new enough.)
I also have an Asus motherboard, funny thing is, my Note Pro does show the USB3.0 indicator in the notification bar, but I'm copying files over right now via Linux and it's copying at 9.9MB/s. That's pretty horrible. Added to that, my Note Pro won't charge from the USB port on my computer, but it will from the wall charger. It has a big red X over the battery when plugged into the PC. So I'm not sure if that's somehow related.
Another thought about both of our problems, is that maybe the cable is a little loose or something is in the port-hole. I know mine was a bit flakey for a bit there (as in I would plug it in, create a folder... then tried to rename it and it said it couldn't access the device... I had to try it three times after unplugging and plugging it back in.)
It doesn't make sense though that it's a BIOS and/or driver issue if you also have a Note 3 and it's working through USB3. I know on mine, when I tried it in Linux (can't recall if I did under Windows), it was extremely flakey there too. The Note Pro just autodetected it, but still copied slowly. I'll have to try that under Windows as well now.
slaapliedje
Yes, you may want to update your BIOS.
(For the record, I'm using an Asus N76VB with the factory BIOS, no issue).
Hm, maybe a silly suggestion... Are you using any type of USB charging setting? I know some of these Asus motherboards come with an option to overvolt the USB port to enable fast charging.
slaapliedje said:
Added to that, my Note Pro won't charge from the USB port on my computer, but it will from the wall charger. It has a big red X over the battery when plugged into the PC. So I'm not sure if that's somehow related.
Click to expand...
Click to collapse
Not related. A USBport doesn't supply enough amperé to register as charging. Even my old Galaxy Tab 2 10,1 has that issue.
I know mine was a bit flakey for a bit there (as in I would plug it in, create a folder... then tried to rename it and it said it couldn't access the device... I had to try it three times after unplugging and plugging it back in.)
Click to expand...
Click to collapse
I have that issue with my Note 3 and even my TF700T since day 1. It's an MTP bug. And now since 4.4.2 I can't rename anything on my Note 3 without explorer.exe crashing. Different pc's, different OS's, different cables, no difference.
ShadowLea said:
Yes, you may want to update your BIOS.
(For the record, I'm using an Asus N76VB with the factory BIOS, no issue).
Hm, maybe a silly suggestion... Are you using any type of USB charging setting? I know some of these Asus motherboards come with an option to overvolt the USB port to enable fast charging.
Click to expand...
Click to collapse
I did read somewhere that Asus AI Suite (program to tune up voltage or something for usb charging) can somehow do "harm" to USB3 connection, but I don't have that one even installed.
Not related. A USBport doesn't supply enough amperé to register as charging. Even my old Galaxy Tab 2 10,1 has that issue.
Click to expand...
Click to collapse
Well... I too see that red x on top but my tablet charges anyway (slowly byt still charges)
The funny thing here is like I said: My Note 3 works perfectly when plugged to USB3, but my NP doesn't like recognize that it's plugged to 3.0 port. It just acts like using 2.0. Same PC, same cable, different device.
Spere said:
I did read somewhere that Asus AI Suite (program to tune up voltage or something for usb charging) can somehow do "harm" to USB3 connection, but I don't have that one even installed.
Well... I too see that red x on top but my tablet charges anyway (slowly byt still charges)
The funny thing here is like I said: My Note 3 works perfectly when plugged to USB3, but my NP doesn't like recognize that it's plugged to 3.0 port. It just acts like using 2.0. Same PC, same cable, different device.
Click to expand...
Click to collapse
Yeah, I know mine isn't charging because I watched, even after plugging it into my computer, it slowly go from 70% battery down to 65%.
When looking at what is hogging all the battery, it's the retarded Indexing service. I'm still in the process of seeing if there's a fix for that, but it really seems like it's having an issue (which would also explain why mounting it on the computer is flakey, since they could be trying to read the same file systems.) Oddly, my Note 3 doesn't have any of these issues (except actually mounting as USB3). In fact, I was starting to suspect my PC at work had crap USB ports, but it's just the stupid Blackberry cable (it only successfully charges the blackberry, not my Note 3 or anything besides my mouse that I've plugged into it.)
slaapliedje
Hello,
I recently flashed TWRP and CyanogenMod 13 on my Mi4. It was working quite well, I had some problems with the rotation sensor and some bugs in the software, but Quick Charge and also the Connection to the PC worked without problems.
Today when I was on my way home I was charging my Mi4 with a Qalcomm 2.0 Quick Charge Powerbank from Aukey (i have used it in the past on other phones, always worked great), but it seems that the USB cable was broken, it was charging very slowly and it also seemed to have a defective contact (the cable charged if i moved it around a bit, but in certain positions it wouldn't charge).
However, when i got home and plugged it in, I noticed that the phone also charged very slowly with the charger, so I thought that I would just flash MIUI back on the device to fix it, maybe it was a problem with Cyanogenmod. But that didn't work at all, the phone couldn't connect to the pc.
So, here's my problem: The PC can't detect the phone and it also seems, that the phone doesn't recognize, that its connected to a pc. Charging via the USB ist still working, but very slow. Also Quick Charging isn't working, it doesn't matter which charger or cable I use, it's always slow. When I connect the phone to the charger or the PC it takes like 5 seconds to recognize, that a cable is connected, then it starts (slow) charging.
The phone doesn't show up in the windows device manager at all (there are no unkown devices shown, the pc just doesn't react when you connect the phone). Also there is no message on the phone when you connect it (usually you can choose if you want the use your phone as a usb drive or just charge it). I also tried to activate MTP in the developer settings on the phone and turning USB Debugging On/Off, but it didn't help.
I managed to download a MIUI Rom from xiaomi.eu with the phone and installed it with TWRP, but it didn't help. So I think I actually broke the USB Port of my phone with a defective Micro USB Cable. The phone can still charge (very very slowly, no quick charge possible), but I can't connect it to the PC anymore. The pc also won't detect the phone when it's in fastboot mode.
I tried to look it up on the internet, but all I found were people with driver problems, and I don't think that I have a driver problem, because it seems like there is no connection between PC and Phone besides the charging.
Anyone knows something about this? Is it even possible to just break the data connection and the quick charging with a defective cable?
Hey, did you get your Mi working? I have a similar experience with mine.
Same Problem
hey i got the same problem did you find any solution ?
redstainedfriday said:
Hey, did you get your Mi working? I have a similar experience with mine.
Click to expand...
Click to collapse
Garling said:
hey i got the same problem did you find any solution ?
Click to expand...
Click to collapse
No, I didn't find a solution for the problem. Phone is still not working, I even ordered a new charging port, but I made a mistake and ordered one for the LTE version. I have the 3g version, so the new charging port didn't even work with my phone. I don't want to spend any more money on it, so I just gave up on fixing it.
Same problem, and I am also stucked in recovery for now, never will buy phone without SdCard now...
Somobody found solution?
So I've had my S7 for around two months now, and all of a sudden fast charging just stopped working. Thought, oh, must be using the wrong cable (have loads of them micro USB cables floating around)
Now I'm certain I'm using the official Samsung fast charge plug and cable that came with the phone, and still no fast charge. When I try to plug into my Windows 10 Desktop or Laptop I have a message that says the device can't be recognized
Phone has already been rooted and flashed with a custom rom. Didn't think that was the issue as it wouldn't even show the mounted storage in TWRP, or identify the phone in ODIN.
Now I've flashed back to the stock rom that I made a backup of when I had the phone, and I still have the same problem!! Can't access internal / external storage using the supplied USB cable and can't fast charge.
I'm thinking the USB port on the device is just knackard.. but really, I've looked after it so well I fail to see how this could happen, unless it's a common fault.
Might just get a wireless fast charger, but do you guys have anything else I can try before giving up on the USB connectivity?
Cheers
try to connect to a different pc, if same it means your usb connector is faulty
Sounds more like the cable is bad tbh, you won't get fast charge from a PC USB port, only from the Samsung charger
But if the device isn't recognised by the PC, and won't fast charge from the charger, the common thing between them is the cable
Possible it's the phone USB port, but more likely the cable is bad
Afaik certain cables can not fast charge either, so chances are the ones you have lying around that are not the official cable can not support it
Genuine Samsung USB cable is white with the USB port symbol on both ends and the phone end has two small ridges to grip when inserting and removing it, should help identify it
Yep I'm using the official cable and fast charger
I'm trying to fast charge via the fast charger and not USB. Only trying USB to access the internal / external storage.
Tried on my desktop and laptop and both have the same issue where my old HTC m8 connects without any issue.
clownstyle said:
where my old HTC m8 connects without any issue.
Click to expand...
Click to collapse
With the same cable?
*Detection* said:
With the same cable?
Click to expand...
Click to collapse
To fast charge I've tried the original Samsung cable with the fast charge plug.
To connect to the PC I've used x3 different cables that all work with my HTC one m8. With all of them I get device not recognised. Already tried installing Samsung switch and reinstalling drivers which didn't work.
clownstyle said:
To fast charge I've tried the original Samsung cable with the fast charge plug.
To connect to the PC I've used x3 different cables that all work with my HTC one m8. With all of them I get device not recognised. Already tried installing Samsung switch and reinstalling drivers which didn't work.
Click to expand...
Click to collapse
I mean for the HTC, does the Samsung fast charge cable work to connect to the PC?
Does sound possible the phones USB port is faulty if you can't get any connection at all to the PC with multiple cables
Try changing the USB mode in developer options
Networking > Select USB configuration
*Detection* said:
I mean for the HTC, does the Samsung fast charge cable work to connect to the PC?
Does sound possible the phones USB port is faulty if you can't get any connection at all to the PC with multiple cables
Try changing the USB mode in developer options
Networking > Select USB configuration
Click to expand...
Click to collapse
Yep the genuine Samsung cable works when connecting the htc to the computer.
I've tried enabling USB debugging and switching between charging, MTP, PTP, RNDIS, Audio Source and Midi.. all of them come back with the windows popup
clownstyle said:
Yep the genuine Samsung cable works when connecting the htc to the computer.
I've tried enabling USB debugging and switching between charging, MTP, PTP, RNDIS, Audio Source and Midi.. all of them come back with the windows popup
Click to expand...
Click to collapse
Unfortunately it is starting to sound like the phone is at fault
Still under warranty? (KNOX 0x0)
*Detection* said:
Unfortunately it is starting to sound like the phone is at fault
Still under warranty? (KNOX 0x0)
Click to expand...
Click to collapse
Unfortunately not. Well it's been rooted and flashed so I guess not.
Ordered a wireless fast charger so hopefully that will see me through and WiFi network for file transfers.
I reckon the USB port will need replacing but I'm not really inclined to do that myself.
Just noticed you said you flashed back to stock using a backup you made
Have you tried stock using ODIN and 100% stock files, using CSC to reset?
My dad has a5 2016 with the same issue, and no warranty. I bought flex + connector , replaced it and still nothing. No fast charge ( it takes cca 4hrs to charge it fully ) and no usb connectivity. I gave up on that
@ClowsTyle
Any luck? I seen your recent post in another thread and it sounds like you tried to replace the USB but that didn't work.
I'm having the exact same issue now. Device suddenly stopped fast charging, Windows does not recognize it when plugged into PC. I ordered a new cable to double check and also tried on different computers. I also tried reinstalling drivers, but nothing has worked.
Hi my is doing the same thing no Fast charge and no pc connection, did anybody find out what happen with yours ?
You have to change power ic s535 for s7 edge.
When usb gets moisture power ic will damage.
I have same problem my phone charging 0-100 6hours but ı install notorious kernel and it takes 3 hours it is better than 6 hours
Same Issue
I've had the same issue for the past 3 weeks now and I've tried everything I know...
1. Tested cable and charger with another S7 and they work fine.
2. Factory Reset.
3. Changed the USB port chip.
4. Turned on "Low Battery Dump".
So far, the issue hasn't changed.
was this issue solved?
I´m having same issues whit my galaxy s7 active, I can not fast charge my phone no matter what cable I use, then noticed that evrytime I plug it to any computer it says the devicescan not be recognized, I´m about to buy a new charging port and install it, but I want to make shure this is not a software related issue.
I´ve tried several cables and several laptops/ pc´s
I´ve factory reseted my device and turned on low battery dump, wiped cache partition, and problem still there...
The charger could be faulty/damaged did you try a different charger?
---------- Post added at 06:43 PM ---------- Previous post was at 06:40 PM ----------
Dial *#08# and select the first option (mtp and another option i am on a custom rom that seems to not have the *#0808# setting
I also have the same issue with my phone the phone charges but not recognize and also tried to change settings on phone and nothing? And my other samsung phone works and nothing wrong with USB tried to install smansung drivers on PC and still same issue.
I tried a different USB and nothing works and different ports on my comp.
My ports works with my other samsung phone so not sure why not with the S7?
Is the USB faulty?