As it shows from the title, this is the official Jelly Bean 4.3 room with a rooting method ( if you wish to root ) also a Google play installation.
Downloads: (Choose one link as you wish)
1- All files "Rom file + Recover file + Google Play file + SuperSU file"
file size: 1.3 GB
http://www.filefactory.com/file/4g3tedsq9tkp/I9502%204.3%20officia%20room%20%2B%20google%20play%20%2B%20rooting.rar
2- All of the above except The Rom file
file size: 24.3 MB
http://www.filefactory.com/file/5zjsz818rjl/I9502%204.3%20google%20play%20%2B%20rooting%20WITHOUT%20THE%20ROOM.rar
The steps are as the following: ( a text file explanation is included with the download)
"DO NOT EXTRACT ANY OF THE USED FILES"
First: Have an entire backup of your phone data, in case of a failure.
Second: Turn off your phone then start your phone in download mode "Down button + Home button + switch Button".
Then up button to say yes and enter the download mode.
Third: Open Odin program then put the update rom 4.3 in the PDA and start.
The phone will restart with the new update 4.3.s
Fourth: Again go to the download mode and also the same again with the Odin
and this time put the recovery file. the phone will restart.
Fifth: Before going to the recovery mode, make sure that you copy the two files.
The SuperSu and the Google play file (yourZgapps), to your local or external memory.
Sixth: Turn off your phone and go to the recovery mode, Up button + Home button + switch button.
Then up button to say yes and enter the recovery mode.
Seventh: Now you just need to install the two files (SuperSU and google store).
Unfortunately, yet, there is no English version in this recovery and instead this is
a Chinese version. However, you can see some English word in the choices.
In the first screen you can read "zip" click it then you go to another screen.
You can see "sdcard" in one option and "external" in another. Choose one of them
according to the place you have copied your files. The next screen you can navigate
to the file and install it as usual.
Do the installation to the both files and after you finish just touch the go back sign until it
goes out and reboot.
Congratulations: now you have an official rooted rom 4.3 with Google play in I9502
Issues may occure:
*Android upgrades whenever I turn my mobile on?
1. Download and install Root Explorer.
https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en
2. Navigate to “/system/framework/” using Root Explorer, click on “Mount R/W”.
3. Find these files:
com.google.widevine.software.drm.jar
com.google.widevine.software.drm.odex
4. Either add “.bak” to the end of the file names, or delete them.
* Change Boot animations and audio?
http://forum.xda-developers.com/showpost.php?p=44199700&postcount=682
*How do I remove the Chinese text in the phone app?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Navigate to Settings > My device > Call > Phone number locator
2. Uncheck “Enable PNL”
is there anybody success to do this root method?
Can you please tell me if somebody had already use this method to root and get the google playstore successfully on his phone?
I just buy a new GT-i9502 and want to root it.
If there is a video link or something else related to this I really appreciate.
Please help to answer here if someone already success to complete all above steps.
Thanks
roon randrianasolo said:
Can you please tell me if somebody had already use this method to root and get the google playstore successfully on his phone?
I just buy a new GT-i9502 and want to root it.
If there is a video link or something else related to this I really appreciate.
Please help to answer here if someone already success to complete all above steps.
Thanks
Click to expand...
Click to collapse
New update firmware is out now go to this link
Search in the youtube "I9502 I9502ZNUGNE2 Android 4.4.2 KitKat Official"
I cannot post a link here because of the website policy
No download link working
Related
Hi, I have just bought the STAR N9770 - 5.08 inch MTK6577 . I am relativly pleased with it but love to install cwm and root, but to be honest I'm a little confused as to what files I need.
I am not new to flasing rom/cwm/rooting but have always had HTC phones.
Can someone please help me with what files I need and where to get them and how to do it, I realise this is a lot to ask but I don't want to screw it up.
This is my phone, it running jb 4.1, this was how it came.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Root help
---
Do you have a recovery there? Maybe try making a backup and flashing a root binary from a different device (galaxy for instance). I heard it sometimes works and if not you have a backup.
BTW - How is this device? Seems solid?
Sent from my NexusHD2 using xda app-developers app
---
root script?
---
root via factory recovery
1.copy CWM-SuperSU-v0.93_tirannozaurus_madnorb.zip (post #107) to the sdcard of your n9770 phone
2.boot into stock recovery (power btn+ volume up).
3.press menu key to show menu
4.select update from sdcard menu point (navigate with vol keys)
4.select zip file and press the ok/home button (front middle button on your phone)
reboot
the zip file is CWM-SuperSU-v0.93_tirannozaurus_madnorb.zip
thnx madnorb post #107
http://forum.xda-developers.com/showthread.php?t=1825332&page=11
you do it on your own risk
I use this tutorial http://forum.xda-developers.com/showthread.php?p=38337401
Sent from my GT-I9300 using xda premium
---
update:
---
CWM RECOVERY and ROOT!
---
I'm getting a 'Download Warning' on my PC
It says:
Not ALL images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?
Any ideas what to do from here?
---
Thanks for the offer. I've sent the phone back
3G didn't work at all. I'll wait until the next one arrives and start the process again.
---
CWM Recovery & Root
I have successfully flashed a CWM recovery and root script on this phone. Everything works. Here's how its done:
Here is the "About" under settings on the phone that i have done this on:
First Download This:
http://www.mediafire.com/?eq9b28ua89wh8d1
This RAR Archive contains everything needed.
MAKE SURE YOUR PHONE IS ON JELLYBEAN. [4.1]
1: Installing CWM Recovery
Extract the downloaded zip and run the flash tool. (Flash_tool.exe)
In the flash tool, click where it says "scatter-loading", and browse for "MT6577_Android_scatter_emmc.txt" [It is in the: \CWM_recovery_4.1\recovery folder that was included in the downloaded archive]
Now, before flashing, MAKE SURE "RECOVERY" is the only thing ticked in the list of things to flash.
(Mine had two things ticked by default, just make sure the only thing that is ticked is the recovery.)
When the scatter file is loaded and only recovery is ticked, make sure your phone is off and the battery is out. Also make sure it is unplugged from the computer.
Now in the flash tool, click the download button at the top.
*Note: If you get: "Not ALL images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?", Just click "Yes"
Plug in your phone with the battery out and wait for it to finish flashing. If the flash tool doesnt detect the phone, it means the drivers probably aren't installed. install the drivers [included in download (MT6575_USB_VCOM_drivers)] and wait for it to finish flashing
When it flashes, you will get a popup window with a circle, showing that it has completed. you can now unplug your phone.
CWM recovery is now installed on the phone. Time to root!
2: Rooting VIA CWM Recovery
Copy the "CWM-SuperSU-v0.93_tirannozaurus.zip" to your phone's SD card.
Boot the phone into recovery. [hold volume+ and power while the phone is off]
Choose "Install zip from sd card" [using volume and power buttons] and navigate to "CWM-SuperSU-v0.93_tirannozaurus.zip"
Flash it, and then reboot the phone. You should now have root:
If you follow all of this properly in order, this should work! i am not responsible for anyone bricking their phone. Doing this is all on you.
*NOTE*
If your play store is not working [If it says there is no connection], Goto your phone's settings and set your date and time. This fixed it for me.
Also, credit to the original authors of the files. I have simply taken the required files and archived them for your convenience.
Hi, I'm not fairly new to this forum but I silent read from a long time ago and now I decided to share something I found.
Let's say you're tired with rooting and xposed as some apps refuses to run upon detection of either or both of those, and custom ROMs out there didn't float your boat, you decided to return to the stock. No recoveries, just a plain stock. But you need that SystemUI with netmeter, or you're too lazy to re-log in 6 different Twitter accounts onto the Twitter app you've previously backed up using TitaniumBackup or similar.
Without any words let me start:
What you need:
Obviously an unlocked bootloader since we will flash a recovery, and locked ones can't do so.
Any custom recovery, either CWM or TWRP that's fine. Don't worry about its compatibility with the stock, as it'll be wiped again (if you want)
Flashtool, it already includes fastboot for flashing stuffs, otherwise why is this called Flashtool?
Your current FTF file
OPTIONAL : AromaFM if your mods isn't a flashable zip
For TWRP you can also use its built-in file manager
Steps:
Download and set up Flashtool
After installation there will be some folders like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Install the drivers located in the Drivers folder, place your current firmware's FTF file to the firmwares folder, and for convenience, place your recovery in the x10flasher_lib folder, and rename it to something short and easy, like rec.img or similar.
Put your mods in the phone's storage/sdcard (and also your aromafm if you choose to use it).
Turn off your phone.
Open up Command Prompt (or console window of your choice, if you're not on Windows), and navigate to the flashtool/x10flasher_lib folder.
Run this on your console:
Code:
fastboot flash boot rec.img
change rec.img to your recovery's filename.
Plug in your phone with a USB cable while holding volume + button.
When done, plug it out and boot to your recovery by powering it on and pressing volume - button when the illumination bar lights up (depends on your recovery).
Apply your mods (flash mods, replace system files, remove bloatware etc.).
You may skip steps below if you change your mind to having a (compatible) custom recovery
When done turn off your phone again.
Open up your Flashtool, if asked for admin rights just say yes.
Click the bolt icon above the window, leave the Flashmode selected, and click OK
find your firmware, select it but don't flash it yet. Uncheck/check these options, you don't want to wipe your data, right?
Click to expand...
Click to collapse
Now press the flash button, located on the bottom-right of the window. When a window pops out (instructions to connect your phone while holding the back button), connect your phone with the Volume - pressed.
Wait the flash to finish, and unplug your phone.
Now you have your mods back and your app datas restored 'without root'~!
NOTE: I've done this on my Xperia E, for other phones I can't yet verify if this method works, so if anyone is interested to try this out go ahead and don't forget to report it back to me whether it's worked or not~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
password: rootjoy
How to Install Custom ROMs with Rootjoy
Step 1.
Download, unrar and install Rootjoy on a Windows PC if you haven't done it yet, then run it. You might need to disable your antivirus app for the period of the installation process, then set the Rootjoy folder as an exception.
Step 2.
Enable USB debugging on your phone and connect it to a USB port of your PC. - Don't use a USB hub.
For the first time you have to enable on your phone to be accessed by your PC. Check the screen of your device.
WARNING! Updating the ROM of your phone with Rootjoy will erase your user data. To get a perfectly stable system by this update, that's recommended to manually process a factory data reset before installing a new ROM.
Step 3.
Click on the 'Flash' button
Step 4.
If you haven't got a ROM file already downloaded, you'll get the following screen. Click on the 'Download' button and after a few seconds you get a list of downloadable ROMs that fit your specific device.
You need a working internet connection.
Step 5.
Choose a ROM from the list and click on the Download button next to it.
Step 6.
Click on 'Download Manager' at the bottom right corner of the app window. Now you can see as your ROM file is being downloaded.
Step 7.
Click on 'completed', then Flash.
Step 8.
Here you can choose to make a backup of your old installation or skip it. Let's skip it now.
Step 9.
In the next step the Rootjoy recovery will be downloaded, then Rootjoy copies the ROM file to the memory of your phone and installs the Rootjoy recovery.
Step 10.
After finished, your phone boots into recovery and the update process begins. You may close the Rootjoy app now.
Step 11.
Check the screen of your phone. The installation of your custom (or even stock) ROM is starting.
The progress bar can be stuck at 50% for a long time but don't be afraid, the installation process is running smoothly in the background. It can take for up the 10 minutes.
Step 11.
After finishing, your phone automatically reboots into the newly flashed Android system.
No more tasks to do.
For further information and the available products, please check UMI's official website: www.umidigi.com
The official page of Rootjoy is here: www.umidigi.com/page-ROOTJOY
I encourage you to join UMI's user community: community.umidigi.com/forum
It is removed from Mediafire.
Can you upload it on a different website or service?
Download access denied by mediafire
as stated above, the DL of rootjoy is blocked by the hoster. Any known reasons or issues? Pls, advise
tnx, Luthor
found a mirror of rootjoy 1.0.4.16516
http://www.filefactory.com/file/uuj0rnp8qot/Umi%20Super%20MTK6755%20Android%206.0%20Smartphone%20Firmware%20206153%20160706.rar
Any due date to support UMI S2 PRO?
junalmeida said:
Any due date to support UMI S2 PRO?
Click to expand...
Click to collapse
Rootjoy is a discontinued product, the UMi Rome was the last supported model.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good afternoon
I root my Samsung tablet t285m
someone knows how i try and root with vroot and kingorot and nothing
I need root please help
I come to this forum because they are the master of the android
[IMG="TABLET SM T-285 TABLET A"]
[/IMG]
please see my PM (private message) maybe set you in some direction maybe not...also need help from you if possible advice/guidance
thanks
needed root file
gencom said:
needed root file
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-tab-s/help/looking-to-direction-root-galaxy-tab-a6-t3390941
(T285M,....modified system image for debloat etc-tar.md5 fails on flash in odin-not sure if some signing is needed-have the system folder if anyone interested...took out some apps, added csc folder with some xmls for control on data on off auto for mms, added two fonts...nothing more than that)
also see page 14 here
http://forum.xda-developers.com/and...ng-tab-e-sm-sm-smnu-smp-t3302935/post66585078
I just got my T285 yesterday. Noticed that in Setting, App manager I can move some app to sdcard but after restart, the moved app disappear.
Sorry if I have mislead anyone.
Now I am also facing memory shortage with this 8G device.
I have lost all hope for root on the SM-T285. Why such a low profile device gets a locked down bootloader annoys me.
However I'm trying to customize its system.img, I'm stuck though as Heimdall fails at 3% upload everytime I try to use a repacked system.img file. Flashing the original image works fine though so it could just be in the way that I repackage the image. tune2fs shows some difference which I am still trying to sort out.
I'm willing to help if there are things that I can try.
jaritico said:
i found this on web, seems fake but, uses a beta root file of cf auto root webpage:
HOW TO ROOT GALAXY TAB A 7.0 (2016)
Note: This is a developing story. As far, we have found only one way to root your phone. But if someone invent more tricks of rooting in future, we will try to share with you.
You can install Chainfire’s SuperSU manually using a custom recovery such as TWRP (In this method we are showing how to install SuperSU.zip file with TWRP). If you are interested, check details below but take a backup of your device’s data first. This method should work with any variant of tab including SM-T280 (Wi-Fi only) and SM-T285 (4G/Wi-Fi)
Step One: Download Chainfire’s SuperSu.zip file.
Step Two: Copy the downloaded zip file to your device.
Step Three: Turn off your Samsung device and boot into recovery mode (boot device by pressing and holding down volume up, home, and power keys at the same time to enter in recovery mode).
Step Four: Take a backup, it is optional but important because if something happen bad in rooting, backup file will help you to restore previous state easily. So press ‘backup’ button, check all the boxes for backing up everything and then swipe to start the game.
Step Five: Once you have taken the backup file, press ‘install’ button, locate the SuperSu.zip file and confirm you want to install it.
Step Six: Reboot the device and your device is rooted.
Credits: http://lifeatsamsung.com/root-galaxy-tab-7-0-2016/
Click to expand...
Click to collapse
Yeah it's fake. To even be able to follow that, you need a custom recovery, but there is no way to install custom recovery right now with a locked bootloader.
Hi everyone,
I need to root my note edge, as this is my first time plz guide me step to step. attaching screenshot of my device info.
Hope to receive fast and positive news.
Thank u
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey mate. I rooted my N915F +/- 2 weeks ago. I was also lost. Googled allot, but I am rooted and running smooth. I wished I made bookmarks so I could share it with you.
But from what I can remember. First go to this site: https://autoroot.chainfire.eu/
Then download the software for N915G.
Install Odin to PC.
Put phone in download mode (Turn phone off, hold volume down+home button and push the power key. The phone will show a warning. Push volume up to continue.)
Connect phone to PC.
Open the installed application on you PC (Odin)
Remember the comm in cf-autoroot must be green. You will see a message on the left saying "Added"
Put the file in in PA button. Browse for the file(it was downloaded with the .zip file where cf-autoroot was in. It will be a ".tar.md5" file)
Let the phone reboot.
Go to this site: http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Download your phones CWM file from the site.
Put phone in download mode again.
Open Odin.
Connect phone.
Put the CWM file in PA button in Odin.
Click start.
Let it reboot.
Go to Playstore and update SuperSU app.
Remember, if you boot into CWM recovery (Phone off , volume up+home button+power) and you select "exit and reboot" , ClockWorksMod will sometimes say that your phone is not rooted of does not have SuperUser installed. It will ask to install it. Say NO.
If you say yes, my phone went into a bootloop.
Watch this video : https://www.youtube.com/watch?v=DIj-FL1K7To
Also, READ what on the websites. I dont take responsibility for a broken phone.
My steps is just for you to be sure you are on the right track of what you read on the websites. I may have missed some steps. But as far as I remember , this is what worked for me.
Also , you bootloader must be unlocked to root your phone. I dont know how to check that. I just took a chance and my phone works.
And remember, warranty is void.
Hope this helps a bit
It's very simple
ashishtheboss00 said:
Hi everyone,
I need to root my note edge, as this is my first time plz guide me step to step. attaching screenshot of my device info.
Hope to receive fast and positive news.
Thank u
Click to expand...
Click to collapse
First go into download mode
Press Power button down volume key and home button at the same time then press volume up
Now ur in download mode
Flash twrp using Odin
Phone will reboot now
Switch off the phone then press volume up power button and home button to get into twrp
Flash supersu from recovery