Hi everyone...I'm new here...I have a problem, I flashed as a secondary ROM the deodexed xwlpf ITALIA 4.0.3 *26-05-2012* and I want to flash the Jkay 14.1. When I go to flash I receive a message of error:
assert failed: getprop("ro.build.PDA") == "I9100 XWLPF"
E:Error in /emmc/CM10/ ROM Stock /JKay/ Deodexed (Custom ROMS)/XWLPF_JKay_Deluxe_v14_1_deodexed.zip
(Status 7)
Installation aborted.
What can I do??Thanks...
alemacis said:
Hi everyone...I'm new here...I have a problem, I flashed as a secondary ROM the deodexed xwlpf ITALIA 4.0.3 *26-05-2012* and I want to flash the Jkay 14.1. When I go to flash I receive a message of error:
assert failed: getprop("ro.build.PDA") == "I9100 XWLPF"
E:Error in /emmc/CM10/ ROM Stock /JKay/ Deodexed (Custom ROMS)/XWLPF_JKay_Deluxe_v14_1_deodexed.zip
(Status 7)
Installation aborted.
What can I do??Thanks...
Click to expand...
Click to collapse
try placing the zip file on the root of ur internal sdcard, then reboot to recovery.
go to 'Dual boot options' and there flash the file using the ' install zip to secondrom' and see
ensure that ur on latest siyah kernel v4.1.5
Sun90 said:
try placing the zip file on the root of ur internal sdcard, then reboot to recovery.
go to 'Dual boot options' and there flash the file using the ' install zip to secondrom' and see
ensure that ur on latest siyah kernel v4.1.5
Click to expand...
Click to collapse
I had already did like you suggested and the installation had abort.. Yes I have 4.1.5 because I have CMX as primary ROM...
Sorry for my bad english :angel:
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
The way I updated mine was real simple: (Also have the TF300TG)
1. copy correct zip file from Asus to microSD card.. (make sure its the only file on the card)
2. Use the tablet microSD slot not the docking station one.
3. Power off the Tablet and reboot
Mine rebooted and ran the update no issues at all.. Hope that helps
I did this before unlocking the bootloader etc
mydear2020 said:
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
Click to expand...
Click to collapse
mydear2020 said:
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
Click to expand...
Click to collapse
For you tablet to update as you first tried stock recovery needs to be in place. Not cwm or twrp and the file would be TW_epad-user-10.4.3.7.zip.
You should be able to flash TW_epad-user-10.4.3.7.zip with cwm to update ( install zip ). After this completes you will have stock recovery in place not cwm.
Good luck!
Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
maxs8007 said:
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
Click to expand...
Click to collapse
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
flash cf root for ddlf2 first. and you posted on the wrong section.
Sent from my Nexus 4 using xda app-developers app
format system and sdcard bro !!!
dr_amjad said:
Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
Click to expand...
Click to collapse
Ok,i just encountered this problem just right now ,with clean install ,so after i clicked wipe data /factory reset , i clicked instal zip from rom ,chosed rom ,after this phone restarted and entered again in CWM ,when i chosed again install zip from sd etc... encountered this error ,so i go back in main menu and chose wipe data /factory reset again ,and after this it worked like a charm to install the rom ,no error was displayed. I hope it will work for you to !
LoLaTiOn said:
format system and sdcard bro !!!
Click to expand...
Click to collapse
formatting the system will remove the baseband which wont allow 10.2 to install. i'd encountered the same problem 2 days back and i'd solved the way I mentioned above.. to cross check the error again (2nd time) I formatted the system after clean flash of ddlf2 and I got the same error.. just installing 10.2 directly over ddlf2 won't cause any problem.
---------- Post added at 09:11 AM ---------- Previous post was at 09:05 AM ----------
dr_amjad said:
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
Click to expand...
Click to collapse
"wiping date/factory reset " won't cause any problem. just don't format any thing.. if you want you can format SD Card for your satisfaction.. but don't format system or else that will lead to that error.
hey bro flash only cf-root or bam kernel and don't format system if the installation failed you will have to flash DDLF2 again.
THE SAME ERROR occur again ~~!!
I tried more that 10 times to return to DDLF2 then upgrade my phone to cm10.2 dhirru Rom 4.3 android and the same error appear in every time !!
ASSERT FAILED status 7
Now moment i returned to DDLF2 and upgrade my phone to cm10.2 alpha 8 dhirru ROM and it success upgrading
It's the only Rom which flashing occur Successfully
So , there is NO HELP ?!
Asset failed. Mean either wrong rom or wrong phone.
I saw your error show "captivate". Are you sure you in the right forum..? Btw. Here is galaxy sl gt-i9003 and 9003L
Sent from my Galaxy Nexus using Tapatalk 4
i had the same error while installing cm10.2 it gave me the same error(status 7).device only would go in recovery mode.after that i downloaded the rom again and it worked.the download was corrupt.so download again and try. :fingers-crossed:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
you try bypass the assert check by delete those line in rom zip file, the file is updater-script in folder
"CM10.1-GalaxySL-JDQ39E-Alpha7/META-INF/com/google/android"
Code:
assert(getprop("ro.product.device") == "galaxysl" || getprop("ro.build.product") == "galaxysl" ||
getprop("ro.product.device") == "GT-I9003" || getprop("ro.build.product") == "GT-I9003" ||
getprop("ro.product.device") == "GT-I9003L" || getprop("ro.build.product") == "GT-I9003L");
open up the zip without unzip it, just open with winrar than edit than save.
this is a try, never try it before for our phone.
---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
just found out the ROM download site having 2 type of CM10.2, one is for LG Optimus black others one for GT-i9003
makesure you download the correct one
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
dr_amjad said:
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
Click to expand...
Click to collapse
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
chongns said:
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
Click to expand...
Click to collapse
yes
i did first Wipe Data / Factory Reset two times each one follow the other then i flashed the Rom zip
Working method (tried several times with different roms):
-flash DDLF2
-flash cfroot
-recovery mode (the green one)
-flash your rom, then you'll be bringed to the new version of cwm (the blue one)
-wipe data/factory reset
-format system
-flash the rom
Hi all:
I'm also getting this issue lately, and I use to solve it going to mounts and storage and mounting all the filesystems, then try again.
Looks like the updater script can't mount the file systems automatically or something lately and so it gives that error.
Hope this solves your issue.
BTW, I also saw it extrange that the assert of the zip you were flashing indicated captivate, our device codename for CyanogenMod is galaxysl, not captivate, make sure you're flashing the right zip. (Also, captivate is not p970 either, so you should have mistakenly downloaded the zip from somewhere else).
Sent from my GT-I9003 using xda premium
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
sam_777 said:
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Here's the solution to this problem
I suggest stock C2305_b.2.16_Europe firmware to be installed through the custom recovery (CWM or TWRP) .
It odexed , non-rooted .
How to install:
- Download firmware to SD-card
- Go into recovery and make a backup .
- Do wipe data (factory reset) , cache, dalvik cache
- Install firmware C2305_b.2.16_Europe
- reboot
DOWNLOAD
I am from india Gujarat....can I flash this stock rom with vmw or not?
script aborted (no error message ) E: error in /sdcard/..............
(status 7 )
installation aborted
OP request
THREAD CLOSED