Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
maxs8007 said:
don't format system after flashing ddlf2. directly install 10.2 over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2.
4) wipe data/reset. (optional)
(don't format anything or else it will give you that error)
hope this helps you.
Click to expand...
Click to collapse
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
flash cf root for ddlf2 first. and you posted on the wrong section.
Sent from my Nexus 4 using xda app-developers app
format system and sdcard bro !!!
dr_amjad said:
Hello every body
I have a problem during installing a new ROM
i have samsung galaxy SL i9003 and i this phone was in CM 10.1 alpha 8
I tried to upgrade my phone to CM10.2 Rom
and this is the link of the ROM : http://forum.xda-developers.com/showthread.php?t=2431402
first i return to DDLF2 then go to recovery mode
i do wipe data / factory rest
After that when i select the Rom zip folder from Sdcard to install
the phone tell me :
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "captivate" ||
getprop.("ro.build.product") || ... (and so on)
E:Error in /sdcard/#whateverpackage#.zip
Status 7
Installation aborted.
there is any help ??
Click to expand...
Click to collapse
Ok,i just encountered this problem just right now ,with clean install ,so after i clicked wipe data /factory reset , i clicked instal zip from rom ,chosed rom ,after this phone restarted and entered again in CWM ,when i chosed again install zip from sd etc... encountered this error ,so i go back in main menu and chose wipe data /factory reset again ,and after this it worked like a charm to install the rom ,no error was displayed. I hope it will work for you to !
LoLaTiOn said:
format system and sdcard bro !!!
Click to expand...
Click to collapse
formatting the system will remove the baseband which wont allow 10.2 to install. i'd encountered the same problem 2 days back and i'd solved the way I mentioned above.. to cross check the error again (2nd time) I formatted the system after clean flash of ddlf2 and I got the same error.. just installing 10.2 directly over ddlf2 won't cause any problem.
---------- Post added at 09:11 AM ---------- Previous post was at 09:05 AM ----------
dr_amjad said:
Thank you very much
i will try and tell you
but in the link of The ROM the installation instruction is :
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
so wipe data/factory rest is before installing the ROM zip and that what i did
Click to expand...
Click to collapse
"wiping date/factory reset " won't cause any problem. just don't format any thing.. if you want you can format SD Card for your satisfaction.. but don't format system or else that will lead to that error.
hey bro flash only cf-root or bam kernel and don't format system if the installation failed you will have to flash DDLF2 again.
THE SAME ERROR occur again ~~!!
I tried more that 10 times to return to DDLF2 then upgrade my phone to cm10.2 dhirru Rom 4.3 android and the same error appear in every time !!
ASSERT FAILED status 7
Now moment i returned to DDLF2 and upgrade my phone to cm10.2 alpha 8 dhirru ROM and it success upgrading
It's the only Rom which flashing occur Successfully
So , there is NO HELP ?!
Asset failed. Mean either wrong rom or wrong phone.
I saw your error show "captivate". Are you sure you in the right forum..? Btw. Here is galaxy sl gt-i9003 and 9003L
Sent from my Galaxy Nexus using Tapatalk 4
i had the same error while installing cm10.2 it gave me the same error(status 7).device only would go in recovery mode.after that i downloaded the rom again and it worked.the download was corrupt.so download again and try. :fingers-crossed:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
you try bypass the assert check by delete those line in rom zip file, the file is updater-script in folder
"CM10.1-GalaxySL-JDQ39E-Alpha7/META-INF/com/google/android"
Code:
assert(getprop("ro.product.device") == "galaxysl" || getprop("ro.build.product") == "galaxysl" ||
getprop("ro.product.device") == "GT-I9003" || getprop("ro.build.product") == "GT-I9003" ||
getprop("ro.product.device") == "GT-I9003L" || getprop("ro.build.product") == "GT-I9003L");
open up the zip without unzip it, just open with winrar than edit than save.
this is a try, never try it before for our phone.
---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------
dr_amjad said:
@chongns : I am sure that it's a right Rom and Right phone ~~ !
Click to expand...
Click to collapse
just found out the ROM download site having 2 type of CM10.2, one is for LG Optimus black others one for GT-i9003
makesure you download the correct one
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
dr_amjad said:
@chongns : Thanks very much for help
Every thing now i being OK
I download the Rom Again and download gapps
Then i tried to flash the rom and tell me the same error ( status 7 )
then i do Wipe Data / Factory Reset one time and repeat it again
Then i choose the ROM zip and it flashed OK
all what i do that i did Wipe Data / Factory Reset twice followed by each other
Thanks very much for helping me
Click to expand...
Click to collapse
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
chongns said:
although, you have flash through, but that still weird to have error status 7.
btw, the correct step should be factory reset than flash the zip, yous is flash the zip than factory reset.......
Click to expand...
Click to collapse
yes
i did first Wipe Data / Factory Reset two times each one follow the other then i flashed the Rom zip
Working method (tried several times with different roms):
-flash DDLF2
-flash cfroot
-recovery mode (the green one)
-flash your rom, then you'll be bringed to the new version of cwm (the blue one)
-wipe data/factory reset
-format system
-flash the rom
Hi all:
I'm also getting this issue lately, and I use to solve it going to mounts and storage and mounting all the filesystems, then try again.
Looks like the updater script can't mount the file systems automatically or something lately and so it gives that error.
Hope this solves your issue.
BTW, I also saw it extrange that the assert of the zip you were flashing indicated captivate, our device codename for CyanogenMod is galaxysl, not captivate, make sure you're flashing the right zip. (Also, captivate is not p970 either, so you should have mistakenly downloaded the zip from somewhere else).
Sent from my GT-I9003 using xda premium
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
sam_777 said:
Simply copy the file to internal SD card and flash it. Problem solved for me.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Here's the solution to this problem
Related
i seem to have fubar'ed my nexus s (uk version) i updated to ics, didnt like it so tried to restore to a backup i made earlier today...
at the moment when i turn on my phone it shows
fastboot mode- No Boot or Recovery img
lock state - unlocked
I can enter recovery. but cannot restore.
tried wiping cache,dalvik etc.
When hitting restore it returns with:
... system.img not found. skipping restore of /system/
also does the same with
data.img
cache.img
sd-ext.img
i have no idea what to do... if you could help it would be greatly appreciated.
Try flashing a rom. U can mount SD card within recovery.
Sent from my Nexus S 4G using xda premium
yeah tried flashing ...
gets stuck on google screen
Do you have a One Click return to stock available for your model? It wouldn't hurt to start fresh. I did that on my NS4G last week. Does your PC recognize the phone?
Sent from my SPH-D710 using Tapatalk
looking into the unbrickable mod atm... my phone seems to have no .img files.
tried restoring to stock and still the same issue... it says it cant find .img so skips them then when i try to re boot it sticks on the google screen
After trying to apply from zip (cm7, that i have used numerous times before)
i get this ---
Installing update...
assert failed: getprop("ro.product.device") =="crespo" ll getprop("ro.build.Product") == "crespo" ll getprop("ro.product.board") == "crespo"
E:Error in /sdcard/update-cm-7.0.3-NS-signed.zip
(Status 7)
Installation aborted.
i havent the faintest idea what to do...
Tried re-flashing CWM recovery?
yup tried re flash,
i think i need to replace the .img files... i just dont know how
it says that
system.img not found
data.img not found
cache.img not found
sd-ext.img not found.
it skips the restore of these say restore complete. yet there is obviously nothing to restore.
there must be a way of fixing this???
Do you have the latest version of CWM flashed? (5.0.2.0)
yeah re installed/reflashed (5.0.2.0)
it seems to be working
*~~~~~~*
Facepalm
*~~~~~~*
Such a noob
I have had a similar problem before, and even advised on that exact thing.
lesson learned.
KEEP RECOVERY.IMG UP TO DATE
Thank you for pointing out the obvious.
I'm such a ****
No problem flex59, best way to learn is the long and hard way . I had a similar status 7 problem on my move up to ICS. Figured the latest recovery will save me wasted hours down the track eventually, and hopefully someone elses.
To downgrade from ICS, you need to flash the full GB 2.3.6 ROM first...
I downgraded from OTA ICS 4.0.3 due to battery, Wifi & lag issues as well. A NANDroid backup does NOT contain the bootloader and radio AFAIK. Here's what I did.
Find the appropriate FULL ROM here and download and copy to your SD card.
Download this flashable Superuser here and copy to your SD card.
Make sure you are familiar with and set up for fastboot and have the latest CWM recovery img file. You will have to reinstall CWM. These instructions are assuming that CWM recovery is already installed on your device.
1. Make sure the full ROM and SU zip are on the root your SD card.
2. I did a full wipe of data, cache, dalvik.
3. Go into CWM recovery and flash the full ROM. Now flash the SU zip.
4. At this point, the full ROM flashed GB2.3.6, stock recovery, bootloader and radio back. But you should be rooted due to step 3.
5. Boot into Android. I installed ES File Explorer from the market. In ES File Explorer settings, select both root settings “Root Explorer” and “Mount File System” to navigate and modify root files. Allow permissions in SuperUser.
6. Navigate to /system/etc and rename (tap&hold on file) install-recovery.sh to install-recovery.sh.bak (this file reinstalls the stock recovery at every boot)
7. Using fastboot on your computer, flash CWM recovery again.
8. NOW using CWM, restore your GB 2.3.6 NANDroid backup.
Like nothing ever changed.
Hi all,
So here's the story.
Got the Galaxy Note (GT-N7000) about 3 or 4 months ago.
Got root and loaded ICS Stunner (1.4.26.1, if that's important).
For the most part, it was a good ROM, and I like the Apex launcher which came as part of that ROM.
The only hiccup was bluetooth. It would only lockup with my car's BT system about 1 time in 20. As you can imagine, that got old real quick.
So, earlier this week, I see that CM9RC1 came out with support for the N7000.
I've never run a Cyanogen ROM on any device, but I know they are considered to be one of the best custom ROMs out there, so I thought "what the hell... let's backup, wipe, and load the CM9RC1 build".
So, I boot into CWM recovery menu, backup to internal memory (ie the 16GB of data space), and then wiped everything.
And by everything, I mean:
* wipe data/factory reset
* wipe cache partition (redundant, I know, 'cause the factory reset does this anyway)
* advanced/wipe dalvik cache
* advanced/wipe battery stats
Then:
* install zip from sd card/choose zip from internal sd card/cm-9.0.0-rc1-n7000.zip
I then see:
Finding update package....
Opening update package....
Installing update...
assert failed: getprop("ro.product.device") == "galaxynote" || getprop("ro.build.product") == "galaxynote" || getprop("ro.product.device") == "n7000" || getprop("ro.build.product") == "n7000" || getprop("ro.product.device") == "GT-N7000" || getprop("ro.build.product") == "GT-N7000"
E:Error in /emmc/cm-9.0.0-rc1-n7000.zip
(Status 7)
Installation aborted
I didn't know what any of that meant, other than it was not what I was wanting to see.
So, I figured "oh well, that didn't work, let's just wipe everything again and reload the backup."
Upon selecting the restore file, I see:
Checking MD5 sums....
Erasing boot before restore...
Restoring boot image...
Restoring system...
At this point, I see hundred of file names cycling through.
Then suddenly, this:
Error while restoring /system!
Ahhh crap.
Oh well, I still have the ICS Stunner zip file, so I'll just wipe everything and reload that and rebuild everything from scratch. Slow, painful, but at least I'll be ok.
Except the load process never finishes. The progress bar (which takes up perhaps the middle 50% of the screen) proceeds nicely all the way to the end, but then keeps drawing all the way to the right hand edge of the screen and never terminates. Have to hold the keys for about 8 seconds to get the device to reboot... and then we're back to square one.
So, that's my tale of woe.
Anyone got any suggestions on how to get out of this situation?
Any advice would be greatly appreciated.
Cheers.
Bruce.
just flash the stock rom via odin when in download mode to get back to normal. they always say do these:* wipe data/factory reset
* wipe cache partition (redundant, I know, 'cause the factory reset does this anyway)
* advanced/wipe dalvik cache
* advanced/wipe battery stats
2x each just to be sure and also to format system under mounts and storage.
Thanks for the info.
Sorry to sound like a total noob, but what is the process for flashing a stock rom via Odin.
I have odin, just not sure how to use it.
Thanks in advance.
what you got to do is find the stock firmware file (extension .tar) for your phone and carrier (probably in the development section for your device). Then download odin 1.85 and put your phone into download mode (can google this). Then in odin make sure the "re-partition" box is NOT checked and and click PDA and look for the file you have just downloaded (tar file). Then plug your phone into the pc and wait for odin to recognize then press start.
Hit thanks please
Sent from my SAMSUNG-SGH-I727
Stock firmware should be on sammobile.com
Irfdiddy, YOU ARE DA MAN!!!!
Unfortunately, I could only click 'thanks' once.
I am now smiling like a madman at the little green android on my Galaxy Note screen.
Thanks!
How is that ROM for you after you got it running?
Sent from my SGH-T989 using xda app-developers app
drewkj09 said:
How is that ROM for you after you got it running?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The stock gingerbread rom appeared to be fine, but I didn't keep it long!
I reacquired root, and updated to CM9RC1, as was my original intention.
That was at midnight last night.
It's now 7am and I'm about to head off to work. Got an hour on the train to reinstall apps. Oh joy!
Cheers.
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!
In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?
Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great
jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions
So...
I meant to install the PAC All-In-One ROM.
Darktitor specified that I had to flash a stock ROM through Odin. After making sure that I could flash a CF-Root DDLF2 instead of my stock XWLF2, I put my phone in Download Mode and flashed DDLF2 through Odin. I went in recovery mode, wiped data and formatted /system. I then tried installing the ROM (P.A.C. All-in-one, as I already specified elsewhere) through the "Install zip from SD card" button, but it displays the following errors: "assert failed: getprop ("ro.product.device") == "galaxysl" | | getprop ("ro.build.product") == "galaxysl"", repeated for GT-I9003 and GT-I9003L (yeah, it IS a Galaxy SL), and E:Error in /sdcard/i9003 blah,blah,blah (the filename of the ROM, obviously).
What should I do now?
EDIT: The signature verification for the update also fails.
MOAR EDIT: Same problem both with Dhiru's Alpha 7 and the LEMON build.
Try not to format the /system before flash.when u format the /system,build.prop was remove and the signature verification will failed.just wipe data/factury reset,wipe cache and then flash the rom./system will be formated automatically during the flash.
Sent from my GT-I9003 using xda premium
zhiyong said:
Try not to format the /system before flash.when u format the /system,build.prop was remove and the signature verification will failed.just wipe data/factury reset,wipe cache and then flash the rom./system will be formated automatically during the flash.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I managed to solve the problem on my own, but thank you very much! (I just had to flash XXKPE and DDLF2 before installing PAC.)
Hi guys
first of all: i am a total newb. Please be gentle :fingers-crossed:
I tried to install the latest build from here http://download.androidarmv6.org/_builds/beni/stable/
I did follow the beginners guide (partially because some links are dead).
What i did so far:
root (not from the beginners guide)
CWM 5 from the guide
then up to CWM 6.0.5.0 http://forum.xda-developers.com/galaxy-fit/orig-development/dev-cwm-recovery-upd-20140707-t2808196
wipe data / reset
wipe cache partition
wipe dalvik cache
install zip - > choose cm11 rc10 -> status 0 installation aborted
iSanecheck stated that the update-binary must be replaced: http://forum.xda-developers.com/showthread.php?t=2581415&page=41
But i have no clue how to do that. And i cant reply in this thread, because i am a total newb.
Please help me
Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.
I followed your instructions and tried it again. It now says Installation abort. Just without Status 0.
Try this by iSanechek:
iSanechek said:
use this recovery.img, maybe running.
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse
Pls. do post ur feedback.
Galaxy_Rohit said:
Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.
Click to expand...
Click to collapse
use this recovery. no need to replace binary. I checked, it works!
but
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse
Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x
rillrill said:
Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x
Click to expand...
Click to collapse
heh, only terminal, but give me a minute I'll think about .zip
Ps one moment, I'll check it works or not.))
Pss upload on google drive.)
CWM 6.0.5.3 in .zip
Thanks for the work!
I got it updated and it completed the installation of the latest nightly build (20140913). Thank you very much!