Hi All,
Is there a way to edit Smartskey to allow using one of the hardware buttons to trigger the Speaker On/Off option?
Thanks!
Speakerphone?
It's already hardware button binded to press and hold green call button, during a call. Handy in the car when your bluetooth headset needs a charge, quick press the green button to answer, then immediately press and hold to switch to speaker.
Or do you mean use the speaker for other purposes?
Gajet said:
Speakerphone?
It's already hardware button binded to press and hold green call button, during a call. Handy in the car when your bluetooth headset needs a charge, quick press the green button to answer, then immediately press and hold to switch to speaker.
Or do you mean use the speaker for other purposes?
Click to expand...
Click to collapse
Tried it on my ETEN X500 and it places the call on hold instead.
In addition I'd like to be able to switch to speakerphone whenever, meaning
When I receive a call or place a call myself.
Not sure about Eten phone, but HTC's phone (most if not all), you will have to press and *keep holding* the green button long enough (while on call). Pressing it will give you 'Call on Hold'. Alt, you try PhoneAlarm .. or PocketPhone Zen (something like that) that gives you profiles (like Nokia phone) that enables you to have the option of getting speaker phone automatically upon receiving.
I am a Touch Pro which does not have a PTT button.
Any suggestions on how to reach the camera quickly? What is your quickest way to get to the camera?
remap the center button on your phone to start up camera
mobileSCR Gscroll, map the capacitive area of the screen(where the buttons are), really useful(can choose any sequence of taps to do anything, open application)
or AEButton... what' the use of a volume rocker? just use one button to get to the volume page and use the touch screen to change the setting...(one problem would be changing vol on the fly like during a phone call... that case, change the setting, one-button press = default volume behavior, two-button press = whanever you want, three -button, long press, whatever you want
mputtr said:
remap the center button on your phone to start up camera
Click to expand...
Click to collapse
Thanks! I will try to do this but I cannot find the built in remap ap on NRGs rom, still looking for it :-D
@paperWastage: Thanks for the tip! If I cannot find the built in software I will install AE buttons.
you cant remap the center button. i think he was being pedantic. maybe you can set a button to be voice command and say "start camera".
I just have the camera in the programs... Slide over to programs and press camera...
The Jack of Clubs said:
you cant remap the center button. i think he was being pedantic. maybe you can set a button to be voice command and say "start camera".
Click to expand...
Click to collapse
actually... i was serious. There is a fuze keyboard config software floating somewhere in the raphael forums. It might be able to let you remap the centerbutton.
but why would you want to remap your center button.
The Jack of Clubs said:
but why would you want to remap your center button.
Click to expand...
Click to collapse
I have to agree as this is a very important function.
Mayne a Long press center button maybe more appropriate.
I cant seem to find any remap built in software on the NRG rom. My Touch dual had one which allowed me to remap some basic buttons like volume button.
Looks like AEbuttons is the answer for me. Will try to test it first and update you guys.
If you go to Setting and on the Personal Tab there is a Buttons setting and you can change the receive call button (press and hold of course) to whatever you want, including the camera.
Also a good idea to go over to the Systems tab and change the Long Press End Key Setting to Lock Device or something else than Turn Airplane mode on/off, god that sound is annoying when Airplane mode is turned on
it depends on the rom or software if you have the unlocked all buttons. honestly theres no faster way to get there than start > camera or photos tab > camera. if you dont have an american phone with a ppt button, there wont really be a faster way.
i actually did not mean to map the single click. I thought it was obvious i meant the long press.
using softkey manager you can replace one of the softkeys on the homescreen, as ur using an NRG rom im guessing your two softkeys on the home tab are "action" and "contacts"? ive got rid of the contacts, because a. i could jus use the people tab, or b. jus press the call button to bring up the dialer... and have replaced it with camera
the softkey manager should be under utililites/tweaks... it is on mine and im using an NRG rom
hope this helps.
Hello, I am loving the sensation and mw600 pairing, however one key function does not seem to work - pressing the 'answer' button on the headset (short press) does not activate voice search. Long press triggers the mw600 device selection, double press triggers a last number redial... When the phone is ringing, short press answers the call successfully in the headset ..... I can hold down the search button on the phone itself successfully and this will activate voice search in the headset...
The key function of activating voice search from the headset itself by pressing the answer button fails.
I have tried workarounds with limited success, such as the headset button app, eg by assigning a double press on the play button to voice search... However I can get no functionality out of the main button itself other than answer and redial... Voice search capability via this button would be truly awesome.
Has anyone experienced this issue and / or any suggestions to make voice search via mw600 button functional?
I'm currently running the EnergyROM from 22nd December and it appears to work for me, though the results were awful - it never dialed the name I said, LOL.
When I hold down the home button, my voice features don't show up...I've searched but haven't found anything....I'm thinking the phone is defective...any ideas?
The feature is not available in your language.
Im a recent Blackberry convert and one thing I loved about it was the mute button (in the middle of the volume up and down on the bold 9900). Now that was great when Im always on conference calls for work and very easy to just hit that button to go on mute and hit it again to un-mute even with the screen locked.
Now I know the Skyrocket doesnt have one, and it sort of sucks to keep having to wake the phone to hit the mute softbutton, when you driving or doing other things you cant do it blindly.
So I was wondering since Im rooted, is there say any way to map out say the volume button that say if we hit both up and down at the same time it would initiate a mute for in call use and same again to un-mute it. That be nice to use without looking at the screen. I havent been able to find anyone who has done this or mapped out these buttons for other use.
Dixit