Related
[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile
EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
FreakLikeChewy said:
EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
It's good to hear that you managed to revive your phone. Many of us find it convenient to install a custom recovery such as TWRP which makes backing up and restoring, switching ROMs, and many such activities much easier. XDA happens to have an active and friendly area dedicated to the Samsung Galaxy S5, and specifically to the T-Mobile version at http://forum.xda-developers.com/tmobile-galaxy-s5. I suggest you search that area or simply post your question in the Q&A forum there at http://forum.xda-developers.com/tmobile-galaxy-s5/help where our experts will be most likely to be able to guide you.
Another boot loop
Hello!
First of, I would like to apologize if you have seen this same thread title for nth time.
I have a problem with my note 10.1 (prior 2014 version) and warranty has expired already so I'm searching for the solution in the internet and it always lead me to xda site.
I have tried almost all guides and help I found in the internet and I think I'm going in circles. I have not done installing a custom rom in any of my android devices as I'm afraid to encounter an issue and not be able to resolve. But even though I update with only the official software update, I encountered my worst fear. My note is brick (I think). So here's what happen.
More that a month ago, I saw my note installing some updates. Then after some minutes, it re-started and the screen with something like "Downloading..do not turn off target" message appeared. I let it be until I sleep at night, I just connected the charger to ensure my note will not turn off. But when I wake up in the morning, my note is still showing the same screen and as I know, the software update wont take 8hrs to complete. I tried to re-start and the screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message. At that time, I did not know what Kies is, so I searched the internet. After I downloaded Kies, I restart my note but Kies does not recognize it.
And so my search for the solution in the internet has started, trying to follow all guides I encounter. For weeks I have tried but to no avail, until one day, I tried to install auto root. For the first time, I saw odin with the "PASS" message and I saw the samsung logo again. It continued to boot until I saw my wallpaper again. So I thought I have fixed it already. But when I was setting up the time zone, my note hang and I have no choice but to re-start. After the re-start, I'm back to where it all started.
I tried the same procedure I did when I had a temporary success but this time it always failed.
Sorry for the long story as I was trying to give the complete background as I think it will be helpful. Hopefully, you guys can help me resolve my issue. I really like Android but I never thought that it will be this hard to resolve an issue with it.
Thanks in advance! :good:
during my search, some guides will advise to use a specific odin version. why is this so?
I thought the latest version is always the best? maybe not thru with Android?
Hi guys, anyone kind enough to provide a working pit file for note 10.1 (GT-N8000) the old version?
I think there's a 2014 edition of Note 10.1. Mine is older version.
hello all.
I'm still unsuccessful in making my tablet useful again. May I know that is it possible for software update to damage the hardware of a tablet or any mobile device? This is the first time I heard of such thing. If it's true, then Samsung is not making it's devices a software friendly device. I hope this is not true and I can still fix my tablet.
hi
i am trying to get this thing on , but it keep showing me "Samsung Galaxy Note 10.1" screen , nothing else
tried to hard reset , so i pressed power+ vol up and asked me to restart or continue
so i continue , and i am stuck at a creen showing me android logo with "Downloading... do not turn off target!!"
its been like this for 4-5 hours
there is something written in the upper left corner
ODIN MODE
product name : GT-N8000
custom binary download : No
current binary : Samsung official
system status : Official
any help please ?
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
furkey said:
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
Click to expand...
Click to collapse
the tablet is not mine , my niece was using it
it was running good until several days and stopped working
when i go to download mode , it keep restarting for ever
i went to some local shop in my area and they said they can't fix it ( maybe its a hardware issue ? )
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
furkey said:
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
no , i didn't tried to flash it
my PC wont recognize it
aos10 said:
no , i didn't tried to flash it
my PC wont recognize it
Click to expand...
Click to collapse
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
furkey said:
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
installed kies , but the logo keep running on my desktop
ok , now my niece told me there is some important files and photos on it
how to restore those files without formatting ?
i can't even access to the device , and no microSD card
Just install the firmware. That's the only way you can open up your files with the resources you have. If it's that important, I strongly suggest you to go to a Samsung service and tell them your story. If you want to do it yourself, search for: installing custom recovery, installing rom. When you switch between different roms you don't have to format your data but I can't remember the case with the Odin.
Sent from my D6503 using Tapatalk
Hi, i have the same problem.
I have a galaxy note 10.1 2013. It originally had ics. I updated my software in the middle of this year.
Today, my tab worked fine, as it usually, does. I placed it in my bag at 5:30 pm after playing and surfing the internet. At 11pm, i took it out and it was a bit hot and it seemed to be stuck at the screen where it says "samsung galaxy note 10.1".
I tried to restart my tab but it still remains stuck in the same screen. When i plugged it in, it shows that im charging. But when i start it up, its still stuck in the same screen.
When i pressed the power button and the volume up button, it gets to this screen which says
Warning!! (Blahblah something about custom os blahblah) volume up: continue volume down: cancel(restart phone)
What do i do? I didnt do anything weird or different today than i would have any other day.
Please, i need your help. Thank you!
Sent from my GT-I9505 using XDA Free mobile app
Sent from my GT-I9505 using XDA Free mobile app
Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
Hi,
I see that you have already posted your problem in the correct fora.
Thread closed