IzerHD 4.4.2 in P3110 - Galaxy Tab 2 Q&A, Help & Troubleshooting

Good Day, I installed IzerHD in P3110, performance is good, i like the xperia style and apllication, but one thing is missing, the microphone is not working..
Is this can be FIXED?
Thank you

I will have a look at this issue..
Any1 else having this issue in P3110??
Microphone works very well in P3100.., and I believe in P3113 as well..
Try to port this ROM to a cyanogenmod base for your device.. That should fix the issue..
Edit: My friend has P3110, she confirmed the mic is working fine.
she used a mike fix..

Erbugs said:
Good Day, I installed IzerHD in P3110, performance is good, i like the xperia style and apllication, but one thing is missing, the microphone is not working..
Is this can be FIXED?
Thank you
Click to expand...
Click to collapse
Try the Mike Fix from the SensonicHD thread, it should work..

does IzerHD have a phone remover? I noticed that when I flash it the model was p3100 while my the version of my tab is p3110, it also tries to keep searching for a signal or 3G service which depletes the battery of my tab very quickly, I also have messaging icons and other 3G apps, and the mic doesn't work either, is it okay to flash the mic fix from sensonic? all in all the audio and performance are great! phone remover for V2 would be nice, also will you be adding more xperia apps? I'll report for more problems with the current version, see you in the next version! :cheers:
Sent from my GT-P3110 using xda app-developers app that crashes for no good reason.

Related

CM10 UNOFFICIAL Nightleys

Hello, I take no credit for this at all. Just throwing it out in the open so its not burred on the TeamChopsticks cm10 post.
See OP rpr69 here http://forum.xda-developers.com/showpost.php?p=30788002&postcount=904
Thank rpr69 for the builds then download them from his link.
I have been using the 9/4 build for a day or so and everything seams fine with it.
IF you need instructions on how to flash this then you should not be using a unofficial nightly.
And if you like these builds dont thank me thank rpr69
For Flickergs2usr figured out how to stop the flickering over on the PA thread:
Open build.Prop with any text editor of your choice, find the line that says "debug.mdpcomp.maxlayer=3"
And change it to say "debug.mdpcomp.maxlayer=2" save it then reboot, this will fix the flickering problem
I Have found that the new quick messaging causes lockups. when turned on
As of 9/12 nightly BT stereo audio is still going through the speaker. BT Stereo audio still not working.
As of 9/18 BT stereo audio is working correctly & stil most stable
Is the camera and YouTube working correctly now? Can't tell from the thread. Looked in there for 10 minutes...
Jessical said:
Is the camera and YouTube working correctly now? Can't tell from the thread. Looked in there for 10 minutes...
Click to expand...
Click to collapse
I have been using 9/4 for a day and have no problems with the camera
dont use youtube or even have it installed
Me either, LOL, was just making sure because I use the camera pretty much everyday.
Love the new boot animation. Installed over CM9 stable (just formatted the cache/system/fixed permissions) with no issues.
EDIT: YouTube works fine, btw.
EDIT 2: I have no signal...
EDIT 3: Works okay now, re-ran fix permissions.
Jessical said:
Me either, LOL, was just making sure because I use the camera pretty much everyday.
Love the new boot animation. Installed over CM9 stable (just formatted the cache/system/fixed permissions) with no issues.
EDIT: YouTube works fine, btw.
EDIT: I have no signal...
Click to expand...
Click to collapse
No signal? What modem are you using?
No issues with this modem.
http://d-h.st/XYa
tjsooley said:
No signal? What modem are you using?
Click to expand...
Click to collapse
Everything's okay now, it was a permissions issue.
I originally made them for myself, but I realized I could share them easily so I did. Camera, camcorder and YouTube have been working since I think the 08/26 build. If I know something doesn't work I note it in the file description. They are usually up by 7am EST, and are plain builds from CM10 and Team Chopsticks repository.
Tom
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
About to flash it right now! Will let you know about Camera/Camcorder/Youtube!
Also, does anyone know if CRT-Off Animation is working on 4.1 yet?
knawraz said:
About to flash it right now! Will let you know about Camera/Camcorder/Youtube!
Also, does anyone know if CRT-Off Animation is working on 4.1 yet?
Click to expand...
Click to collapse
Nope. And cam/YouTube is working.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
rpr69 said:
Nope. And cam/YouTube is working.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
oops... just read the previous post about anything not working being in the filename.
smooth rom! I miss CRT though </3
How's the stability? My main problem with alpha3 was it crashed about twice a day. I was going to try out AOKP then try the nightlies. Still on r4ins AOKP build. Pretty smooth but one reboot.
Where ican download it
Sent from my SAMSUNG-SGH-I727 using xda premium
djoneal said:
Where ican download it
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
First page of this thread
How are the softkey lights on this build? Do they work properly or are they still kinda funky?
Sent from my SAMSUNG-SGH-I727
Gtavo704 said:
How are the softkey lights on this build? Do they work properly or are they still kinda funky?
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
There is still a delay when they first light up, but work fine after the initial delay. And bln works correctly.
As an FYI, the builds finish around 6:30-7am EST, I usually flash it by 8, if there is anything obviously wrong, I will pull it, or at least add a comment to the description. I don't use BLN so I can't comment on that feature. I usually check gmail, exchange, camera, camcorder, youtube and GPS as a quick smoke test.
To see the change log, go here: http://changelog.bbqdroid.org/#skyrocket/cm10/next
Anything committed before 5am EST will be in my builds.
Tom
whosgotlag said:
How's the stability? My main problem with alpha3 was it crashed about twice a day. I was going to try out AOKP then try the nightlies. Still on r4ins AOKP build. Pretty smooth but one reboot.
Click to expand...
Click to collapse
I had mine crash a couple times yesterday. The screen goes black and won't do anything unless you hard reboot. Meaning hold power 10 sec. I found some music and media players don't work, and stock appolo musics doubled.
Edit: Reinstalled a backup of cm9.1.0 then upgraded from there with 9/6 everything seems good so far. Will post back if I get crashes or find anything.
Update: So far I have found intermitten sound issues. Plus after 6 hours use no crash so far but I soft rebooted and there was no signal or data plus data in settings menu, the cycle changed and was no way to turn off and on to see if that would help. Toggle switch didn't help but everything came back after 2 more reboots.
Using Stock kernel with this no over or under clocking.
pcidiot said:
I had mine crash a couple times yesterday. The screen goes black and won't do anything unless you hard reboot. Meaning hold power 10 sec. I found some music and media players don't work, and stock appolo musics doubled.
Edit: Reinstalled a backup of cm9.1.0 then upgraded from there with 9/6 everything seems good so far. Will post back if I get crashes or find anything.
Click to expand...
Click to collapse
Is anyone with the crashing issue either overclocking and/or undervolting?
So far i have had 0 problems... im running 05/09 with instagator x and UCLF3 ( debating switching to 6 but i have rogers in canada so i think mine is recommended for signal) ... as well i have a few sound enhancements and gapps 26/7 .... i have had 0 reboots and everything runs clean as **** so far.... the only thing ive noticed is when im playing music ocassionally it cuts out for a split second.
thejbomb87 said:
So far i have had 0 problems... im running 05/09 with instagator x and UCLF3 ( debating switching to 6 but i have rogers in canada so i think mine is recommended for signal) ... as well i have a few sound enhancements and gapps 26/7 .... i have had 0 reboots and everything runs clean as **** so far.... the only thing ive noticed is when im playing music ocassionally it cuts out for a split second.
Click to expand...
Click to collapse
I am in the Toronto area, and I have had very good results with UCLF6 on Rogers, so there is that. I am also using InstgatorX kernel, are you using the eXtreme sound thing that was pulled?
Tom

Hows cm-9.2.2-ICS-PLUS FINAL?

I just logged in after a really long time and just found out about androidmeda's new cm-9.2.2-ICS-PLUS FINAL and am getting really excited about it:fingers-crossed:. Can you tell how it is? what kind of bugs it has, etc? Also which kernel works and gives the best overall results with it without breaking anything including "offline charging"? I would have tested it myself but right now I am travelling and cant risk messing up the sole phone I have. So please spare some time and give me your reviews. Thank you:angel:
No major bug. Kernel v3.0.8.
You should try it.
Thank you....
rr0yy said:
No major bug. Kernel v3.0.8.
You should try it.
Click to expand...
Click to collapse
Yes, its 3.0.8 kernel. But which other kernel from the development section or otherwise would you recommend flashing for the best result without breaking anything in the ROM?
@others
would you care to post for a quick review as well if you have used the ROM. Thank you
sweettaniyaa said:
Yes, its 3.0.8 kernel. But which other kernel from the development section or otherwise would you recommend flashing for the best result without breaking anything in the ROM?
@others
would you care to post for a quick review as well if you have used the ROM. Thank you
Click to expand...
Click to collapse
S&S 7d 9c
/\ |\| /\ |< |\| | |\|
pls hit thanks to show gratitude fr help
:: peace
Sent from Legendary Pandoras Box unlocked with my Rooted LG P500 Optimus One ...
Tethering working?
Can anyone tell me whether the USB and WiFi tethering are working? I absolutely need that, and in the first version of CM 9.2 that I tried out, I couldn't get them to work.
I didn't test the native tether options but I did try USB tethering using pdanet and it works like a charm
Sent from my LG-P500 using xda app-developers app
zeratos said:
I didn't test the native tether options but I did try USB tethering using pdanet and it works like a charm
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Hmm.. not good enough.. don't want to buy the PDA net app.. even Foxfi is paid now.
aravindsagar said:
Can anyone tell me whether the USB and WiFi tethering are working? I absolutely need that, and in the first version of CM 9.2 that I tried out, I couldn't get them to work.
Click to expand...
Click to collapse
Wi-Fi tether works tested. About kernel the best performance beta 5djnox. The best for me it's discover by yourself Rom characteristics so make a backup and flash! c'mon.
renzetti.s said:
Wi-Fi tether works tested. About kernel the best performance beta 5djnox. The best for me it's discover by yourself Rom characteristics so make a backup and flash! c'mon.
Click to expand...
Click to collapse
Definitely going to try out..
USB Tethering works flawlessly using native option.
Sent from my GT-I9082 using xda premium
usb tethering & Bluetooth tethering works great .. i m using it .Previously it was not working but after 9.2.1. it works like charm without disconnect problem
Hi! I own an LGo1, curently runing Bytecode's ParanoidAndroid 3.15 which is a pretty good one (good baterry life and sleep mode, very snappy), except for a few annoing bugs. I want to ask the users who have tried ICSplus if : speaker is working, input PIN screen is being showed corectly, baterry drain (if exists), sudden sdcard unmount and whatever bugs have they encountered etc.
Waiting for your reply .
Thanks
Wooaw
Just installed it. Very smooth and snappy. 'till now stable as a rock : speaker is working, the PIN code screen is displayed correctly, comes with Gplay installed. Me ... like it so far . Still testing
Is there is any OC kernel for hephappy's 9.2.2. ..??? as 600 MHz is the max frequency shown..!!
I have this rom installed again since it seems impossible to find a rom that has all features of the phone working and no random reboots or fc's . I am happy with the rom for the most part and thrilled that it has offline charging. I dont like the battery usage though there seems to be something draining the battery pretty quickly. Anyone have suggestions on improving battery like a different kernel or settings to adjust? I use wifi and 3g a lot but other rom's seem to have much better battery even with those on.
TdiGuy said:
I have this rom installed again since it seems impossible to find a rom that has all features of the phone working and no random reboots or fc's . I am happy with the rom for the most part and thrilled that it has offline charging. I dont like the battery usage though there seems to be something draining the battery pretty quickly. Anyone have suggestions on improving battery like a different kernel or settings to adjust? I use wifi and 3g a lot but other rom's seem to have much better battery even with those on.
Click to expand...
Click to collapse
Trebuchet launcher
Replace it
Sent from my GT-I9082 using Tapatalk 2
Anybody knows if the new security fix that CyanogenMod just released (http://www.cyanogenmod.org/blog/cyanogenmod-10-1-1-release) will be backported to this ROM?
kunnaliskinng said:
usb tethering & Bluetooth tethering works great .. i m using it .Previously it was not working but after 9.2.1. it works like charm without disconnect problem
Click to expand...
Click to collapse
Yes, me too :good:
Where i can dowload this? Becouse its hard to find anything about this rom or hephappy.
Edit- i found some download links but all has been set to private.
Bananek said:
Where i can dowload this? Becouse its hard to find anything about this rom or hephappy.
Edit- i found some download links but all has been set to private.
Click to expand...
Click to collapse
http://p500.evlice.com/

Viper4android

Did anyone manage to install this? Mine just doesn't install things, no errors or anything, after reboot just prompts me to install again!
Yep same thing for me
Sent From My Beaned Razr I
Not support for x86 yet. You should talk with zhuhang about this.
Enviado desde mi XT890 usando Tapatalk 4
Now working! Not optimised so warning about battery use. Will report back. Seems very impressive improvement in sound quality though, best on headphones, of course.
mervluk said:
Now working! Not optimised so warning about battery use. Will report back. Seems very impressive improvement in sound quality though, best on headphones, of course.
Click to expand...
Click to collapse
can you tell me how to make it work...
please..
Thanks..
illall said:
can you tell me how to make it work...
please..
Thanks..
Click to expand...
Click to collapse
It's temperamental. So, sadly I can't tell you how to get it to work. I will say the sound improvement is marginal after listening a bit more, not nearly as good on RAZRi as on later phones. May be a hardware limitation. Did you open it after installation, check speaker and/or headphone, and get asked for and successfully install the drivers (being rooted on your RAZRi - essential). Many people have a problem here though I had no problem. The Guide to set up I used is here, and I've kept to the "model" settings so far: http://vipersaudio.com/blog/?page_id=43.
A lot of people have problems with getting it working, though. And there is no simple solution. If you can make it a system app, that can help, though I've not found it necessary, as can checking force Viper. The blog above again gives the only published advice that I'm aware of. Sorry, and good luck.
UPDATE:
the app Viper4audio, it can support 86x plataform...i installed today and it works like charm...
the link: http://forum.xda-developers.com/showthread.php?t=2191223
but i prefer the sound of xperia phones (walkman).
In XDA, there is a MOD of this app (walkman) and their configuration (xloud,etc.) for all android system, but i cant made work in my phone... i left the link: http://forum.xda-developers.com/showthread.php?t=2730431
i hope anyone can port it and made it work
Awesome!
It really works well and can increase and improve the audio levels. I recommend it
What viper settings help increase volume level on bluetooth headset?
Can anyone share this secret...
Sent from my XT890 using XDA Free mobile app

CM 11 on GT-I9505

Haven't seen this get posted yet. Not even sure who built it, just saw the link on G+ and thought I should share. DLing now to flash on my TMo GS4. We'll see what happens!
:victory::victory::victory:
http://www.droidcrave.com/install-a...galaxy-s4-i9505-lte-via-cyanogenmod-11-guide/
Build is labeled with Albinoman887 so, I guess he is to thank?
I've been running CM11 for the Tmo s4 on my i9505 for 2 days now and have had no FC or anything (apart from the known issues with compass and ir etc). Been really impressed with it
Kurtis.UK said:
I've been running CM11 for the Tmo s4 on my i9505 for 2 days now and have had no FC or anything (apart from the known issues with compass and ir etc). Been really impressed with it
Click to expand...
Click to collapse
How about camera? Does it work?
om22 said:
How about camera? Does it work?
Click to expand...
Click to collapse
Yeah the camera works fine
i9505 KitKat 4.4 port by Jamal2367 http://forum.xda-developers.com/showthread.php?t=2521384
T-Mobile S4 KitKat 4.4 by albinoman887 http://forum.xda-developers.com/showthread.php?t=2520972
I9505 and T-SG4 KitKat 4.4 KangGang by Master http://forum.xda-developers.com/showthread.php?t=2524837
Yeah I'm pretty impressed with this ROM. No fc at all. Only some problems like browser is crap. Market has a bit of a hissy fit. But all good on the 20131114 at the moment
Sent from my GT-I9505 using Tapatalk
Did install the latest Build 7, seems to work fine & extremly fast for me, except syncing with my Google account. It doesn't sync my apps and configurations from it... Anyone else with this issue?
Anyway, really, really great work!:good:
CM11 Break
Hello guys. I've installed 4.4.4 with CM11 installer in my s4 i9505 and everything went good. But sometimes my phone, when is locked, "breaks".. i push the "on/off" button and i've to wait 5 seconds tou see the screen and when my phone is locked and someone try to call me the screen still black but if a touch the screen and turn to the right to answer the call it works. Someone know what i've to do? sorry for the english, i'm portuguese. Congratz

KK 4.4.2 Camera does not work

I am writting this on the Gen Forum since I am a new user.
I am having issues with the 4.4.2 ROM. I love how light weight and non-sense it is but the camera is broken in the 12-25-2013 build. Even though the title of the rom thread says it does work, it doesnt. I am using JB cam from Market but would love to have the default KK app work.
I am also having issue with battery. I did a full charge with the phone off and it was down 20-25% after just a few hours of use. I didnt know if reseting the batt stats would help or is that just BS?
I DO LOVE the fact that MAP (Message Access Protocol) for Bluetooth is working in the ROM! Finally, my car (2013 Nissan Altima) can send text messages for me! This was supported by Android after 4.4 according to Wikipedia. Now I don't have to buy a new phone!
MODS: IF you need to move this, please do. Just know that I am a new user so I have not gotten my 10 posts...
Thanks for the help in advanced!
It is a gapps bug. Flash a other gapps package
Sent from my HTC Sensation using xda app-developers app
Its a bug in the rom it will be fixed so be patient and use this app
https://play.google.com/store/apps/details?id=com.zoonapp.free.gallery3d
Sent from my HTC Sensation using Tapatalk
Thanks! I will try this out! ... Could someone notify the OP that they should change the thread title to "Camera not working"?
JCG3 said:
Thanks! I will try this out! ... Could someone notify the OP that they should change the thread title to "Camera not working"?
Click to expand...
Click to collapse
With 29.12. build camera is working again
There isnt any completly 'stable' KitKat stock camera ported yet... but we are getting there! The meaning of 'camera is working' is that previously camera didnt work at all with the first kitkat ports! It took some weeks to finally port a 'working' solution that alloves to use the camera!
in the meantime you can try to flash this gapps camera : http://forum.xda-developers.com/showthread.php?t=2012857
primary this stock camera is working! Few glitches here and there but at least you can take pics or record video and you dont need to install 3rd party apps!
Try this, https://play.google.com/store/apps/details?id=com.radcam.camera
Nexus KitKat cam on Google Store
The issue that I have now is that the camera only takes half a picture. its the strangest thing...
+-------------------------------------------------------+
PPPPPPPPPPPPPPPPPPPPPPPPP
PPPPPPPPPPPPPPPPPPPPPPPPP
PPPPPPPPPPPPPPPPPPPPPPPPP
+-------------------------------------------------------+
Thats what it looks like... its really odd... I have tried the stock camera after I just flashed the ROM (12/30/2013) after a FULL wipe of all partitions. I even tried the nexus camera as suggested and it failed in the same way
EDIT: Played around some more and the front camera is fine. Now the back camera is taking pics where there is a green bar in the middle and some there is slight distortion at the bottom. Then the grean bar is at the bottom... I am i the only unlucky one? haha
EDIT 2: Tried flashing the google camera and same thing. Is there something wrong with my phone?
Thanks for the help!
Did u Try latest build??
all camera Work
try a stock ROM to know if its only a ROM or an hardware issue
Get this ...
the panarama works, the globe view works, video works ..... yeah and now the camera works.... argh... dang it.... sorry... I will see if I can break it again... haha.
Thanks again
I think i got it figured out....
So it only happens with in the first couple load cycles after reboot.... then it mellows out or something....
anyway, I will keep an eye on it....
I have attached the image that I was talking about...
On 4.2.2 ROMS at first build of superXE ROM, it was the same thing, to solve that i remember we was able to instal FOCAL...
Maybe that's the way, try it
FOCAL (Beta)
It works on the latest [ROM][4.4.2][UNOFFICIAL]CarbonRom for Sensation[03 Jan]
I am on CM11 by android1234567 with Kernel 52 and for me the camera works fine.
Ok now I am totally lost.... haha. I just downloaded Focal and the camera looks great and the pictures are showing up in preview. Here is where is gets weird:
In the gallery, when I look at the picture in tile mode they all look fine and they have no errors. However, when I select one to view, I get blue shades, grey block, distortion, etc.
I am uploading the pics with this post.
I blurred a few things out that I did not want the whole world to see. Notice the purple in the bigger pic. When I look at the same pic on the computer it has the grey box and the purple what-ever-it-is.
I hope this helps in seeing my issue. And, yes, I have formatted my SD card a few times now. It is S-ON, HBOOT 1.27.00, bootloader unlocked.
Thank you for all your help!
use other app , for example snap camera
im using snap camera and it's perfect
huzaljoe said:
I am on CM11 by android1234567 with Kernel 52 and for me the camera works fine.
Click to expand...
Click to collapse
Same here, with this Rom camera works well
Gesendet von meinem HTC Sensation mit Tapatalk
its working just flash the PA stock Gapps and the camera should work fine
I have moved on to Venom 5.x
The camera works in that ROM just fine. I am just not sure what is wrong with the MAP feature of the Bluetooth.
I will create a new thread for that one.
Camera never did work no matter how I flash it. frustrating really. I will track both ROMs for fixes.
Thanks for the help
[CLOSE THREAD]

Categories

Resources