Database Info

can you boot into safestrap using adb? xt926

my phone is stuck in boot and it wont boot into safestrap, I have a rom slot that is backed up and will work but I need to get into safestrap!! any ideas??

nickmoogo said:
my phone is stuck in boot and it wont boot into safestrap, I have a rom slot that is backed up and will work but I need to get into safestrap!! any ideas??
Click to expand...
Click to collapse
Restore w/rsd lite then restore with ss.

aviwdoowks said:
Restore w/rsd lite then restore with ss.
Click to expand...
Click to collapse
rsd wont flash, it says unknown fastboot command

nickmoogo said:
rsd wont flash, it says unknown fastboot command
Click to expand...
Click to collapse
If it complains about the getvar, remove all lines w/ getvar.
Or post other errors

aviwdoowks said:
If it complains about the getvar, remove all lines w/ getvar.
Or post other errors
Click to expand...
Click to collapse
that's all it says. the site I got the firmware from said I might have to mess with the xml files but idk how

nickmoogo said:
rsd wont flash, it says unknown fastboot command
Click to expand...
Click to collapse
nickmoogo said:
that's all it says. the site I got the firmware from said I might have to mess with the xml files but idk how
Click to expand...
Click to collapse
Easy
Open the xml file in notepad not wordpad.
Just remove 1 or 2 at most of the whole lines with getvar. Create a bu first & have them both open.....

aviwdoowks said:
Easy
Open the xml file in notepad not wordpad.
Just remove 1 or 2 at most of the whole lines with getvar. Create a bu first & have them both open.....
Click to expand...
Click to collapse
a bu?

nickmoogo said:
a bu?
Click to expand...
Click to collapse
guessing you ment back up?

nickmoogo said:
a bu?
Click to expand...
Click to collapse
Copy, backup

aviwdoowks said:
Copy, backup
Click to expand...
Click to collapse
do I need to extract the .zip first? cause it wont open it

nickmoogo said:
do I need to extract the .zip first? cause it wont open it
Click to expand...
Click to collapse
So when you ran rsd you selected the xml.zip?
You need to do everything on/with the extracted zip.

aviwdoowks said:
So when you ran rsd you selected the xml.zip?
You need to do everything on/with the extracted zip.
Click to expand...
Click to collapse
yeah I did do that

nickmoogo said:
yeah I did do that
Click to expand...
Click to collapse
Do what?
The 1st is wrong
The 2nd is right
If you need to proceed to remove the getvar edit the ...xml file.

aviwdoowks said:
Do what?
The 1st is wrong
The 2nd is right
If you need to proceed to remove the getvar edit the ...xml file.
Click to expand...
Click to collapse
so I need to flash using the extracted files?

ive always flashed using the .zip

nickmoogo said:
yeah I did do that
Click to expand...
Click to collapse
nickmoogo said:
so I need to flash using the extracted files?
Click to expand...
Click to collapse
Once you extract all to a folder you can trash the zip!
It is a download container only.

but then it wont let me pull it up in rsd

nickmoogo said:
but then it wont let me pull it up in rsd
Click to expand...
Click to collapse
You browse to the .xml file by using the ... button in rsd.
---------- Post added at 11:09 AM ---------- Previous post was at 11:01 AM ----------
The xml is the instruction list for rsd to read. I may just show as vzr...98... but rsd only will recognize a xml extension.

[Q] Wrong Cwm installed

Hello, I have installed a wrong CWM on my phone and now the phone won't boot, what can i do?

bbo139 said:
Hello, I have installed a wrong CWM on my phone and now the phone won't boot, what can i do?
Click to expand...
Click to collapse
try to flash the correct recovery.img

rzr86 said:
try to flash the correct recovery.img
Click to expand...
Click to collapse
I can t start the phone. Even when i try to charge it the led will not work.
Is there another anyway?

bbo139 said:
I can t start the phone. Even when i try to charge it the led will not work.
Is there another anyway?
Click to expand...
Click to collapse
do you even have access to the bootloader?
if not then see the unbricking project thread

rzr86 said:
do you even have access to the bootloader?
if not then see the unbricking project thread
Click to expand...
Click to collapse
With unbricking i can t see the phone.
Is it possible to damage it hardware because of this?

bbo139 said:
With unbricking i can t see the phone.
Is it possible to damage it hardware because of this?
Click to expand...
Click to collapse
i think you damaged the recovery partition

rzr86 said:
i think you damaged the recovery partition
Click to expand...
Click to collapse
... And no solution ?

bbo139 said:
... And no solution ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2775115
if you don't know how to do it go the device to a local shop which supports jtag
besides that i am out of ideas

[Q] bootloader loop

hey i tried to make my htc one m8 a google play edition one and i successfully done that but after Astarte my phone just goes back in to bootloader. what should i do?

oriagranat9 said:
hey i tried to make my htc one m8 a google play edition one and i successfully done that but after Astarte my phone just goes back in to bootloader. what should i do?
Click to expand...
Click to collapse
Go back to your stock setup via RUU.

Tigerstown said:
Go back to your stock setup via RUU.
Click to expand...
Click to collapse
how do i do that?

oriagranat9 said:
how do i do that?
Click to expand...
Click to collapse
Use fastboot to flash the file I posted via ruu. Do u know how to fast boot?
https://www.androidfilehost.com/?fid=95784891001602648

Someone please help, bricked my honor 8!!!

I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me

dussycole92 said:
I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me
Click to expand...
Click to collapse
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?

Gus194 said:
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?
Click to expand...
Click to collapse
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?

dussycole92 said:
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?
Click to expand...
Click to collapse
What error does it say when you try to flash TWRP?

Gus194 said:
What error does it say when you try to flash TWRP?
Click to expand...
Click to collapse
says '"error mode" please update system again then it says error! func no : 16 (lmp3 image) error no : 1 (security verify faild!) then it will keep looping and the Huawei update extrator wont load the update.app, im just a mess right now cause this is my work phone and im freaking out right now

Have you tried flashing the system files and the rest of the files by fastboot yet?

Gus194 said:
Have you tried flashing the system files and the rest of the files by fastboot yet?
Click to expand...
Click to collapse
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0

dussycole92 said:
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0
Click to expand...
Click to collapse
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader

Gus194 said:
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader
Click to expand...
Click to collapse
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!

dussycole92 said:
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!
Click to expand...
Click to collapse
It's most likely a corrupted update.app thats probably the problem. Redownload it

Gus194 said:
It's most likely a corrupted update.app thats probably the problem. Redownload it
Click to expand...
Click to collapse
okay i got it! what are the steps exactly? btw thanks so much for the help!!!

dussycole92 said:
okay i got it! what are the steps exactly? btw thanks so much for the help!!!
Click to expand...
Click to collapse
Just download the stock firmware again for your phone model

Gus194 said:
Just download the stock firmware again for your phone model
Click to expand...
Click to collapse
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?

dussycole92 said:
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?
Click to expand...
Click to collapse
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?

Gus194 said:
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?
Click to expand...
Click to collapse
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed

dussycole92 said:
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed
Click to expand...
Click to collapse
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost

Gus194 said:
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost
Click to expand...
Click to collapse
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing

dussycole92 said:
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing
Click to expand...
Click to collapse
Well you can try to use the SRK toolkit if u want

I need help too, I have a 64 gig US version. Just rooted it today and got TWRP, made a back up. Flashed 2 roms, and none would go past the boot screen so I tried to do my back up and it error'd out at the last minute. I would like to just revert everything back to stock and lock the bootloader. IS this possible? if I do the EMUI update it fails, prob cause the boot loader is locked.

Gus194 said:
Well you can try to use the SRK toolkit if u want
Click to expand...
Click to collapse
i just need to know how the step by step why to get the stock recovery and system on the phone?

(XT2005-3) "bad key" error when trying to boot TWRP

Hi, and sorry for posting about another issue, but this will probably be the last time.
I recently unlocked the bootloader of my Moto E6, and then followed this ([unofficialtwrp. com/twrp-3-3-1-root-moto-e6/) tutorial on flashing TWRP to it. I got stuck on the booting the image part. It says that it would boot into TWRP, but instead I got a black screen with text that says "bad key" at the top left. I think that the reason could be no-verity-opt-encrypt, but I could be wrong. I think that the problem is that I need to boot into TWRP to flash it, but I'm not sure I can without using TWRP. Am I even right? How could I get TWRP to work?
Many thanks,
Collin

EnokiPPT said:
..., but instead I got a black screen with text that says "bad key" at the top left.
Many thanks,
Collin
Click to expand...
Click to collapse
Bad key or N/A screen is a Motorola warning that the firmware may not be stock.
The bootloader is unlocked, unsigned firmware was flashed...

sd_shadow said:
Bad key or N/A screen is a Motorola warning that the firmware may not be stock.
The bootloader is unlocked, unsigned firmware was flashed...
Click to expand...
Click to collapse
Is there a way to get to TWRP even with the warning there?

EnokiPPT said:
Is there a way to get to TWRP even with the warning there?
Click to expand...
Click to collapse
The warning has nothing to do with TWRP
It's just a standard Motorola screen you see after unlocking the bootloader.

sd_shadow said:
The warning has nothing to do with TWRP
It's just a standard Motorola screen you see after unlocking the bootloader.
Click to expand...
Click to collapse
I understand that, but it prevents me from even booting into TWRP at all.

EnokiPPT said:
I understand that, but it prevents me from even booting into TWRP at all.
Click to expand...
Click to collapse
Where did you find a twrp for E6?

sd_shadow said:
Where did you find a twrp for E6?
Click to expand...
Click to collapse
It's an unofficial port.

EnokiPPT said:
It's an unofficial port.
Click to expand...
Click to collapse
This one, that no one has reported that it works?
https://forum.xda-developers.com/moto-e6/development/dirty-porting-twrp-to-moto-e6-t3976715

sd_shadow said:
This one, that no one has reported that it works?
https://forum.xda-developers.com/moto-e6/development/dirty-porting-twrp-to-moto-e6-t3976715
Click to expand...
Click to collapse
No, it's from an external site.

EnokiPPT said:
No, it's from an external site.
Click to expand...
Click to collapse
Well you should ask there.
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
Well you should ask there.
Click to expand...
Click to collapse
There isn't a forums section there

EnokiPPT said:
There isn't a forums section there
Click to expand...
Click to collapse
I'm pretty sure that the issue is TWRP is faulty.
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
I'm pretty sure that the issue is TWRP is faulty.
Click to expand...
Click to collapse
I forgot to mention this, but I also tried the one you linked to the same result. Does that mean both are faulty?

EnokiPPT said:
I forgot to mention this, but I also tried the one you linked to the same result. Does that mean both are faulty?
Click to expand...
Click to collapse
There is no working twrp for your device that I know of.
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
There is no working twrp for your device that I know of.
Click to expand...
Click to collapse
So I found a no-verity boot IMG for a G6, would that work on an E6 or would that brick it? Even if it does, the recovery would still be the same so it wouldn't be hard to just use adb and flash the stock E6 boot img.

sd_shadow said:
I'm pretty sure that the issue is TWRP is faulty.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
I got a few steps farther! I'm not sure how or why, but I flashed the stock recovery back and then flashed TWRP again, and now it will say "N/A" instead of "Bad Key" and then hangs on the splash screen. There are multiple unofficial ports for the E6, so I'll try the other ones and see if that works.
EDIT: Looked through the threads, the only TWRP images that exist get stuck on the splash screen. Thank you for your help!