Database Info

[Q] SetCPU recommendations???

I have installed the clemsyn v4 kernel...what are the best SetCPU settings that seem to be the most stable? Im new to SetCPU and not quite sure how to set it? What should the scaling be set too? Right now i have it on "interactive" is that good or should it be "ondemand"???
What about profiles? What are some basic profiles i should set up? Charging, temp, ect...
Sorry noob here just trying to learn...

Interactive is fine. There's no right or wrong imo.
Play around with the settings to your liking.
Sent from my Transformer TF101 using Tapatalk

[Q]Least Laggy ROM/kernel?

So far I've tried revolver, prime, and android revolution. Revolver with blades2 and prime with clemsyn. They're all laggy on the app drawer fly-in, etc at 1.5 GHz. What rom/kernel can you guys recommend that has little to no lag?

Im on revolver with prime kernel using adw launcher ex no lag at all
Play with vm and read aheads your speed is fine
Also use sio or bfq for your schedular not the default vr because that is crap and causes lag
Sent from my tf101 using xda premium 1.54Ghz

Danzano said:
Im on revolver with prime kernel using adw launcher ex no lag at all
Play with vm and read aheads your speed is fine
Also use sio or bfq for your schedular not the default vr because that is crap and causes lag
Sent from my tf101 using xda premium 1.54Ghz
Click to expand...
Click to collapse
What is VM, how do I set bfq (I see no option in setcpu)?

Bumpity bump.

jwl12345 said:
What is VM, how do I set bfq (I see no option in setcpu)?
Click to expand...
Click to collapse
VM is virtual mem or memory management for android tweaking these settings slowly well help you find a sweet spot however it is different for different people depending on how they use there tf.
So as an example for me i dont multi task alot and want very low latency for you that set up could be bad because you want good multi tasking etc etc
I dont think you can in set cpu however apps like systune or voltage control have this option under IO settings or alternatively IO schedular.
Also with the IO settings i found the stock read aheads quite small so for mmcblk0 i use 1024 kb read ahead and for mmcblk1 i use 2048 kb
Also i slightly uped the min free value to 3512 kb
Hope this helps ya
Also if you use adw ex as your launcher tweak that abit to by lowering fling speed zoom speed and 0 bounce etc

Danzano said:
VM is virtual mem or memory management for android tweaking these settings slowly well help you find a sweet spot however it is different for different people depending on how they use there tf.
So as an example for me i dont multi task alot and want very low latency for you that set up could be bad because you want good multi tasking etc etc
I dont think you can in set cpu however apps like systune or voltage control have this option under IO settings or alternatively IO schedular.
Also with the IO settings i found the stock read aheads quite small so for mmcblk0 i use 1024 kb read ahead and for mmcblk1 i use 2048 kb
Also i slightly uped the min free value to 3512 kb
Hope this helps ya
Also if you use adw ex as your launcher tweak that abit to by lowering fling speed zoom speed and 0 bounce etc
Click to expand...
Click to collapse
How do you change the read aheads?

Best app for overclocking

Hi what is the best app for overclocking the Xperia Play i have only rooted and have a locked bootloader if that helps

I personally like SetCPU. It lets you create profiles for apps, so you can have your cpu run at a higher speed when playing games etc.

SetCPU.
It's very flexible, intuitive and it let to create custom profiles (when is connected to USB, screen off, call or using a specified app)
https://play.google.com/store/apps/details?id=com.mhuang.overclocking

Will Setcpu work on the stock kernel (2.3.4)?

Must boot loader unlocked for over clock.then install setcpu.

Frankieee said:
Will Setcpu work on the stock kernel (2.3.4)?
Click to expand...
Click to collapse
I think it will, but u can only set frequency between the factory values (~250-1000mhz). To go below or above you must install a custom kernel. I prefer Doomkernel, because you can set speed up to 2 ghz.

I would suggest loading DoomKernel, but first you need to have your bootloader unlocked.

hey guy,
have you tried "system tuner pro" yet ?
by that apk you can change CPU , tweaks , task manager , start up setting , SD booster ,....
please check that, that's realy useful

I use no-frills CPU
no problems here, and I think profiles are pointless since that's what governors are for.

Any Performance Booster?

Hey guys, I'm using the CM10 Rom right now and I was wondering if there was any ways to improve the performance of the Infuse. I checked geekbench and got a score of around the 330s. I tried the supercharger and things still seem quite slow, and often games lag and kill my battery.. Any help?

bboysamm said:
Hey guys, I'm using the CM10 Rom right now and I was wondering if there was any ways to improve the performance of the Infuse. I checked geekbench and got a score of around the 330s. I tried the supercharger and things still seem quite slow, and often games lag and kill my battery.. Any help?
Click to expand...
Click to collapse
Install Scotts custom kernel and clock it to 1600mhz. Also, clean out all the unnecessary crap to make the ROM lighter. I typically look at what's loaded in memory to see what would be good to un-install with Titanium that is not needed.

DaMeatMan said:
Install Scotts custom kernel and clock it to 1600mhz. Also, clean out all the unnecessary crap to make the ROM lighter. I typically look at what's loaded in memory to see what would be good to un-install with Titanium that is not needed.
Click to expand...
Click to collapse
I'm sorry, but I'm rather new. Where would I find this? I tried looking for it and I see no one labeled as Scott

Scott is the man who brought us cm10.
Look in the cm10 OP for the OC kernel and flash it on cwm.
Sent from my sweet & buttery Infuse

bboysamm said:
I'm sorry, but I'm rather new. Where would I find this? I tried looking for it and I see no one labeled as Scott
Click to expand...
Click to collapse
The guy who makes CM10 available for the Infuse is named Scott. He means the OC kernel 3_1. It's in the OP. To overclock, (once you have flashed the ROM), go to Settings --> System --> Performance.
Use these settings under Processor:
1. CPU Govorner: SmartassV2
2. CPU Maximum: 1600 Mhz
3 CPU Minimum: 100 Mhz
4. Checkmark "Set On Boot"
Use these settings under I/O Scheduler:
1. IO Scheduler: NOOP
2. Checkmark "Set On Boot"
Use these settings under Memory Management:
1. Checkmark "Allow Purging of Assets"
2. Checkmark "Kernel Samepage Merging"
Use these settings under Surface Improvement:
1. Select radio button labled "Fix Color Banding and Blur Effect"
Exit settings by pressing "Back" until you get to homescreen.
Reset your device.
Enjoy a fast phone.
Don't ***** about battery life if you use these settings.

CM10 Performance settings + SetCPU

Although I love Instigator's Kernel, I believe that it is time to move on from the aging kernel code.
I have started to use the stock kernel with the Paranoid Android by gs2usr, but I wanted more options to my cpu usage so I got set cpu.
Now my question is, will set cpu interfere with the performance settings originally in CM10? I have set the setcpu governor to the same gorvernor in the performance settings. The addition I have is the profile at certain battery points. Did anyone experience anything that caused the app and the CM10 settings to interfere each other causing even more waste in battery?? (like putting teo anivirus software on one computer? )

jee'sgalaxy said:
Although I love Instigator's Kernel, I believe that it is time to move on from the aging kernel code.
I have started to use the stock kernel with the Paranoid Android by gs2usr, but I wanted more options to my cpu usage so I got set cpu.
Now my question is, will set cpu interfere with the performance settings originally in CM10? I have set the setcpu governor to the same gorvernor in the performance settings. The addition I have is the profile at certain battery points. Did anyone experience anything that caused the app and the CM10 settings to interfere each other causing even more waste in battery?? (like putting teo anivirus software on one computer? )
Click to expand...
Click to collapse
Best option is to stick to the performance setting built into Cm10 because it's had all the correct paths on how to adjust the kernel properly .
I don't use set CPU anymore I now use system.tuner pro as an alternate that's it
Sent from my SAMSUNG-SGH-I727 using xda premium

crashpsycho said:
Best option is to stick to the performance setting built into Cm10 because it's had all the correct paths on how to adjust the kernel properly .
I don't use set CPU anymore I now use system.tuner pro as an alternate that's it
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
From what I've been reading the performance module in cm10/aokp is still a bit iffy, but I do agree with the system tuner pro recommendations