Hello guys am using Samsung Galaxy Ace Plus..
Today while using my phone it got switched off automatically.
After that when i tried to turn it on only Samsung Logo Comes n cel starts vibrating and screen goes off....
Even i tried to go in Download Mode & Recovery Mode..after 2-3 seconds it it starts vibrating and screen goes off (so am not able to do anything)..
Help Me am really stuck over here..
Seems it 1st case like this..
Dnt knw actually wheather to call it bootloop or what..
Chinmay J said:
Hello guys am using Samsung Galaxy Ace Plus..
Today while using my phone it got switched off automatically.
After that when i tried to turn it on only Samsung Logo Comes n cel starts vibrating and screen goes off....
Even i tried to go in Download Mode & Recovery Mode..after 2-3 seconds it it starts vibrating and screen goes off (so am not able to do anything)..
Help Me am really stuck over here..
Seems it 1st case like this..
Dnt knw actually wheather to call it bootloop or what..
Click to expand...
Click to collapse
when you put the battery the phone auto turns on?
when it reboots it vibrates everytime?
Connect your phone to charger once it vibrates for the first time when you boot into recovery mode.
And do you have root access?
Guys did you solve this issue?
facing the same
Sent from my PC36100 using XDA Free mobile app
---------- Post added at 11:54 AM ---------- Previous post was at 11:26 AM ----------
ShadowsDie said:
when you put the battery the phone auto turns on?
when it reboots it vibrates everytime?
Click to expand...
Click to collapse
Yes just when i put the battery it auto turns on.
So what to do?
please help
Sent from my PC36100 using XDA Free mobile app
tayeb100 said:
Guys did you solve this issue?
facing the same
Sent from my PC36100 using XDA Free mobile app
---------- Post added at 11:54 AM ---------- Previous post was at 11:26 AM ----------
Yes just when i put the battery it auto turns on.
So what to do?
please help
Sent from my PC36100 using XDA Free mobile app
Click to expand...
Click to collapse
2 years passed... this brings some memories
yeah basically your power button is broken, just think about it. Think that your power button is always being pressed, that explains why it keeps rebooting and it autoboots. Just go to a service to request button change, shouldn't be expensive. Or you could try inspecting it yourself, maybe just some dust got in (usually its dirty there)
ShadowsDie said:
2 years passed... this brings some memories
yeah basically your power button is broken, just think about it. Think that your power button is always being pressed, that explains why it keeps rebooting and it autoboots. Just go to a service to request button change, shouldn't be expensive. Or you could try inspecting it yourself, maybe just some dust got in (usually its dirty there)
Click to expand...
Click to collapse
Dear shadowsDie
Thank you
I did all you mentioned above about power key and found it perfectly working.
After checking it the phone doesn't start itself.
But when i start it stuck in the first screen with yellow triangle for some time then it power Off and start automatically repeating the same steps.
I went to recovery mode and made factory rest and wiped every thing
and when trying to flash CWM.md5.trebon it say
Installation aborted
Then i tried another version of CWM using Odin it passed successfully
But when it reboot it stuck again
What can i do
Sent from my PC36100 using XDA Free mobile app
tayeb100 said:
Dear shadowsDie
Thank you
I did all you mentioned above about power key and found it perfectly working.
After checking it the phone doesn't start itself.
But when i start it stuck in the first screen with yellow triangle for some time then it power Off and start automatically repeating the same steps.
I went to recovery mode and made factory rest and wiped every thing
and when trying to flash CWM.md5.trebon it say
Installation aborted
Then i tried another version of CWM using Odin it passed successfully
But when it reboot it stuck again
What can i do
Sent from my PC36100 using XDA Free mobile app
Click to expand...
Click to collapse
buddy, you can try this http://forum.xda-developers.com/showthread.php?t=2426426
you should to whatever you can so you flash stock using odin, by stock i mean EVERYTHING including bootloader, recovery etc.
if odin gives you error, try to find out if its because of your phone or your pc, as odin tends to give a lot of errors based on drivers and usb ports.
in the case neither a full wipe on the system and all partition works, its totally a hardware issue.
honestly im pretty sure now that its a hardware thing, but the least i can do is to make you try the full wipe
edit: forgot to tell you about the power button.
if you say it didnt autobooted after checking it still could be the button, as when you powered the device up you still used the button which probably got stuck again and continued his buggy purpose.
to fix that , you should follow something like this www(dot)youtube(dot)com/watch?v=3Glllc7bEJs but specifically for the ace plus. I dont know if its connected or soldiered because i no longer have the device so cant help you here
Related
Hi, so i just rooted my sidekick 4g today with superoneclick, and it went well. After the rooting i downloaded the ROM manager tried to flash the ROM, because of the 3e problem on the CWM, i had to use the fix on this thread http://forum.xda-developers.com/showthread.php?t=1052991
So I got the fix and had the ROM i wanted (GingerClone+v2+[AospMod]+Update2), I went to recovery mode and everything started loading. Few seconds later my phone rebooted itself, when my phone turns up, and the flashy Samsung Sidekick 4G graphics came out, nothing else came up. The screen froze at the start up flash.
So can anyone tell me is there any solution to this? i tried http://forum.xda-developers.com/showthread.php?t=775911 this thread and it didnt help, when i press those 3 buttons, only thing came out was the sign of battery charging and that was it, nothing happened.
You must have the bttery out then slide the usb in then do the 3 button combo with the download screen as the first screen to odin it
Sent from my SGH-T839 using XDA App
xtrem88 said:
You must have the bttery out then slide the usb in then do the 3 button combo with the download screen as the first screen to odin it
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
ye, i did.
I took out battery and then connect usb, then press 3 buttons and insert battery, the screen then freezes again at charging. The download mode didnt come up
sheolito said:
ye, i did.
I took out battery and then connect usb, then press 3 buttons and insert battery, the screen then freezes again at charging. The download mode didnt come up
Click to expand...
Click to collapse
keep trying, you shouldnt make it to the charging screen if you do it right
xmeatizmurderx said:
keep trying, you shouldnt make it to the charging screen if you do it right
Click to expand...
Click to collapse
ok.. now this is even worse
i got into download mode, i used odin3, run start, and at the end it says All threads completed (1 pass 1 failed), and now i cant even boot the phone
sheolito said:
ok.. now this is even worse
i got into download mode, i used odin3, run start, and at the end it says All threads completed (1 pass 1 failed), and now i cant even boot the phone
Click to expand...
Click to collapse
Make sure you have all the files in the right place in odin and correctly named, you shouldn't be having this many issues
I am in a state of fear, fear that if i turn off my phone and turn it back on it wil go straight into emergency mode.
Its very wierd,my pc running on windows 7 doesnt recognise my phone(all drivers are intact and installed) in both emergency mode and booted mode and even when the phone is off and i plug in usb,the yellow screen of emergency just pops up. Also i cant boot my phone cause one touch at the power button and yellow screen pops up. The good news though is,after countless attempt at taking out battery then inserting it again and trying to power on,the phone wil boot normaly again. And one more wierd thing is, if wen inserting the usb,the emergency screen doesnt pop up(happens rarely) but lg logo does,then my laptop recognises my phone,and in this way i change my rom from OpenOptimus 2.2.01 to stock v2.3 using kdz updater. Right now its booted and runing normaly except for usb mass storage mode and usb tethering(cuz my laptop doesnt recognize my phone)
I know smethng is wrng with my phone bt i dnt knw wat. Pls help me!
Sent from my LG-P500 using xda premium
Calm down man.
Let's try and go through the options.
Was it always like this with the yellow screen? WHat did you do to get it there?
Try a reset in settings manually. This will bring it back to brand new state.
Hopefully we will be able to resolve this.
Hit Thanks if you found this useful.
First thing if something is wrong is a factory reset.
second, be precise on what you did that soft-bricked your phone...
Thanx in advance for trying to help.
Wel i am nt realy sure how and wen the problem started.
As far as i remembered my phone had the folowing.
1. Cmw recovry(from rom manager)
2. Link2sd wit 500 mb ext2 partition in sd card.
3. Open optimus rom 2.2.02
4. Set cpu to enhance gaming.
And as far as i remember, the problem started wen i tried to boot into cmw recovery.
Pls help.
Sent from my LG-P500 using xda premium
Oh and i forgot to mention that i already did factory reset. It didnt help.
Sent from my LG-P500 using xda premium
Oh and i forgot to mention that i already did factory reset. It didnt help. Also i flash cmw recovery via lgmdp.
Sent from my LG-P500 using xda premium
Try this,
Switch off the phone then,turn on the phone pressing and holding Power + Home + Down volume key at the same time (for five seconds), the phone will turn on and perform factory reset immediately.
Hit thanks if you found this useful.
I already did factory reset but the problem persists. Any other way please.
Sent from my LG-P500 using xda premium
I forgot to mention i even flashed stock rom v10d,v20c and v20g several times hoping that wil fix it,but the problem persists. Pls help somebody.
Sent from my LG-P500 using xda premium
Maybe, it is a hardware issue. The phone being physically broken? Because if the prob persists even after a reset and a flash, well I am a bit unsure.
Could it be the bootloader?and if so, is there a way to fix it back to factory setting? Cuz i dnt think it wil boot at all if its hardware problem.
Sent from my LG-P500 using xda premium
Could it be the bootloader? If so, is there a way to fix it?
Cuz i dnt think it wil boot at all if its a hardware issue.
Sent from my LG-P500 using xda premium
Hey,
Anyway, it could be a small hardware issue like disconnected wire or broken circuit or somthing.
You could try and re-lock the bootloader.
definitely hardware failure coz my ancient z71 acting almost juz like that before
update
after looping in emergency mode for few days,and me trying to revive it my phone is now dead.
i cant do anything with it except take it to service centre.:crying:
Hi GUys,
flashed my note using the CWM method successfully (well..) and after it randomly reboots at different stages, sometime at samsung logo, somtimes ater its fully loaded and running, sometimes on the galaxy note load up screen.
\ive tried wiping, reset, caches, re-rooting
also tried downloading stock and installing with odin, it removes root and same thing.
tried kies, but it says no updates available, on current firmware
it never reboots when in download mode, but dos sometimes when in recovery modes if that helps?
someone please help!!
Maybe its a hardware issue... if you've tweaked around with the software and symptoms don't seem to change, then you might wanna think about sending it in for repair or replacement.
Sent from my GT-N8013 using xda app-developers app
yeh i was thinking that, just hoping it wouldnt be the case
just flashing a custom rom now to see if maybe the stock i installed was corrupt
anywhere i can get previous stock roms from?
ok finally flashed stock 4.0.4 with odin and it seems stable.
Although one problem now -
There is no lockscreen and no boot options while pressing and holding the power button with addition to this while holding power button it directly switches off it slef without any prompt.
i found a thread for a 7000 with a fix but im not rooted and a bit scared to do it again so the command doesnt work in teminal
http://forum.xda-developers.com/showthread.php?t=1853165
Any help please guys?
Seems like your device is in factory mode.
That often happens when your EFS partition screwd up.
Check your Imei number.
Sent from my GT-N8000 using XDA Premium HD app
returned it for another one - turned out the power btto was faulty, hence the rebooting.
brieuwers said:
Seems like your device is in factory mode.
That often happens when your EFS partition screwd up.
Check your Imei number.
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
I was going to start a New Topic but a search brought me to this post.....
Okay, I have an N8010 Wifi only model.
Where exactly does it list the IMEI number of the N8010?
Next, as the Wifi only N8010 does not have a Phone App how do you insert the *# Codes as in *#272 IMEI NUMBER*
Any post talking about an IMEI for the wifi only version is wrong... IMEI's are only for devices that have a phone modem, essentially 3G model only...
ultramag69 said:
Any post talking about an IMEI for the wifi only version is wrong... IMEI's are only for devices that have a phone modem, essentially 3G model only...
Click to expand...
Click to collapse
And with that it's also impossible to carry out any Samsung *# Codes
GT-N8010 stuck in bootloop, can't flash
Hey guys,
Today I was playing world at arms, and all of a sudden my tablet shut down and restarted.
Since then it is in a reboot loop, and doesn't respond to anything.
I run the latest official 4.4.2, which I rooted using the CF-Root method. It worked just fine for over a week, until this morning.
I tried to reflash the stock firware (from sammobile) without any luck. I tried to reflash the CF-Root without any luck.
It fails every time. I tried several versions of Odin (1.85, 3.07, and 3.09), but all of them failed.
I tried to reboot in recovery, but it doesn't work, the android robot appears, but then it restarts in the bootloop.
It goes up to the Samsung logo, before crasking again.
Sometimes I hear the music of World at arms playing before it crashes.
It seems real stuck, and I cannot think of anything else to do...
At the moment, I leave it in the loop until the battery dies off... And then I'll try charging it a bit and restart...
Any other suggestions?
Thanks,
J
Help wanted
Can anyone help me in this regard, my tablet is in Reboot loop.
---------- Post added at 01:41 PM ---------- Previous post was at 01:35 PM ----------
Please guide me if there is a solution to the problem, tablet's screen only shows the samsung logo and does not move ahead please suggest a solution if anyone can
hasanafzaal said:
Can anyone help me in this regard, my tablet is in Reboot loop.
---------- Post added at 01:41 PM ---------- Previous post was at 01:35 PM ----------
Please guide me if there is a solution to the problem, tablet's screen only shows the samsung logo and does not move ahead please suggest a solution if anyone can
Click to expand...
Click to collapse
Same with my Note .... stuck in boot loop... tried all but no luck
anyone to help?
So I'm completely new at this stuff and I followed this guide (http://forum.xda-developers.com/showthread.php?t=1470716). I got to the point where I had a custom ROM (Valhalla Black Edition) and it was working,but I decided I didn't like Valhalla Black Edition and I wanted to go back. So I went to CWM and selected backup and restore, selected my backup that I backed up earlier. It all seemed to work but now my phone is stuck at the boot screen. Any help would be greatly appreciated and sorry if I come across as a noob, it's because I actually am a noob.
Ur pretty screwed this point
Responded to your post in the other thread. Earlier versions of CWM had issues restoring on different versions of CWM than the back up was made from.
Hi. In the recovery menu try a full wipe before restoring the rom: wipe system, wipe cache, wipe dalvik cache.
Sent from my GT-I9300 using xda app-developers app
Taiwan671 said:
Ur pretty screwed this point
Click to expand...
Click to collapse
You should NOT be giving any advice!
@Fridge.....just flash back to stock using heimdal or Odin ....you will be just fine
I was just about to reply to that, but then i saw your post.
Sent from my SGH-T959V using xda premium
lumin30 said:
Responded to your post in the other thread. Earlier versions of CWM had issues restoring on different versions of CWM than the back up was made from.
Click to expand...
Click to collapse
Hey lumin, i understand u have some experience with the SGS4G, so i want to know if i can "revive" my phone, last night i was trying to restore a bad flash with odin but just before the bar fills to 100% it says "failed" now the phone does not turns on, even trying the battery out, volume buttons hold down, connect to pc and putting battery back. I hope you can help me, because i don't know what to do. I apologize for my bad english, it is not my native language.
Lacryma said:
Hey lumin, i understand u have some experience with the SGS4G, so i want to know if i can "revive" my phone, last night i was trying to restore a bad flash with odin but just before the bar fills to 100% it says "failed" now the phone does not turns on, even trying the battery out, volume buttons hold down, connect to pc and putting battery back. I hope you can help me, because i don't know what to do. I apologize for my bad english, it is not my native language.
Click to expand...
Click to collapse
What where you flashing with odin? First thing I would check is to make sure your battery has charge. These phones are really hard to brick but it can happen.
When you insert battery, does the computer see the phone? Sometimes, even with the black screen, you are still in dl mode.
Sent from my SGH-T959V using xda app-developers app
hechoen said:
What where you flashing with odin? First thing I would check is to make sure your battery has charge. These phones are really hard to brick but it can happen.
Click to expand...
Click to collapse
The stock rom, i was trying to flash the 2e recovery, but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Thanks for the reply, i will try to recharge the battery and see if the pc recognizes.
---------- Post added at 11:06 AM ---------- Previous post was at 10:54 AM ----------
champ1919 said:
When you insert battery, does the computer see the phone? Sometimes, even with the black screen, you are still in dl mode.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
I can not tell ,will try that after charge battery, thanks.
but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Wish you luck. Sounds like wrong firmware. If you have the sgs4g, use the link from first post and try the one click.
Sent from my SGH-T959V using xda app-developers app
champ1919 said:
but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Wish you luck. Sounds like wrong firmware. If you have the sgs4g, use the link from first post and try the one click.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Ok, I just did that, and the phone does not apear connected in the comand prompt and in Heimdall, what can i do?
Thanks in advance!
when i was flashing latest Tiwan Rom, it fails via odin. After it fails it's not going to download mod, recovery mod, no boot screen, it only shows that mark - A PC & a Mobile Phone & a CAUTION mark. like http://www.careace.net/wp-content/uploads/2011/07/bricked-galaxy-s.png
ITs hard bricked or softbricked, may its hard. HELP
It's not hard bricked. Get to the screen showing PC and mobile device with the working sign.
Load rom to be flashed with Odin connect the tab to the PC on diffrent USB port (or same, experiment with the ports) till Odin detects it (it should be detected easely)
The start the flashing process.
This happend to me in the past and i was able to fix it this way. Best of luck.
Sent from my GT-I8190 using xda app-developers app
no download mod bro
I know flash during the wierd screen that you get... Worked for me in the past.
Sent from my GT-I8190 using xda app-developers app
your probably gonna get it back to stock in Odin...
happened to me when flashing sungsonic (forgot the 2nd davlik wipe)
if you cant get to odin mode (happened to me too) because when you shut off the machine it just starts
your gonna have to plug it into the charger...
hold the power button to turn it off,
wait for the batter indicator to come on...
wait 10 sec...
hold the power button to turn it off again
as soon as it shuts down hold the volume down and power button...
this should kick it into odin mode...
samsung service man says, 6750 RS. hardware change must.......
want to from big devs like @codeworkx, @pg101 can u help me??
Pezmet said:
I know flash during the wierd screen that you get... Worked for me in the past.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
+1.
I just went to SSC if I want to replace the board and in your case I am sure not needed.
EDIT: I agree if you send it to codeworkx so P31xx get better support
can codeworkx will help me??