[Q] Did I just brick my phone? - Samsung Galaxy S (4G Model)

So I'm completely new at this stuff and I followed this guide (http://forum.xda-developers.com/showthread.php?t=1470716). I got to the point where I had a custom ROM (Valhalla Black Edition) and it was working,but I decided I didn't like Valhalla Black Edition and I wanted to go back. So I went to CWM and selected backup and restore, selected my backup that I backed up earlier. It all seemed to work but now my phone is stuck at the boot screen. Any help would be greatly appreciated and sorry if I come across as a noob, it's because I actually am a noob.

Ur pretty screwed this point

Responded to your post in the other thread. Earlier versions of CWM had issues restoring on different versions of CWM than the back up was made from.

Hi. In the recovery menu try a full wipe before restoring the rom: wipe system, wipe cache, wipe dalvik cache.
Sent from my GT-I9300 using xda app-developers app

Taiwan671 said:
Ur pretty screwed this point
Click to expand...
Click to collapse
You should NOT be giving any advice!
@Fridge.....just flash back to stock using heimdal or Odin ....you will be just fine

I was just about to reply to that, but then i saw your post.
Sent from my SGH-T959V using xda premium

lumin30 said:
Responded to your post in the other thread. Earlier versions of CWM had issues restoring on different versions of CWM than the back up was made from.
Click to expand...
Click to collapse
Hey lumin, i understand u have some experience with the SGS4G, so i want to know if i can "revive" my phone, last night i was trying to restore a bad flash with odin but just before the bar fills to 100% it says "failed" now the phone does not turns on, even trying the battery out, volume buttons hold down, connect to pc and putting battery back. I hope you can help me, because i don't know what to do. I apologize for my bad english, it is not my native language.

Lacryma said:
Hey lumin, i understand u have some experience with the SGS4G, so i want to know if i can "revive" my phone, last night i was trying to restore a bad flash with odin but just before the bar fills to 100% it says "failed" now the phone does not turns on, even trying the battery out, volume buttons hold down, connect to pc and putting battery back. I hope you can help me, because i don't know what to do. I apologize for my bad english, it is not my native language.
Click to expand...
Click to collapse
What where you flashing with odin? First thing I would check is to make sure your battery has charge. These phones are really hard to brick but it can happen.

When you insert battery, does the computer see the phone? Sometimes, even with the black screen, you are still in dl mode.
Sent from my SGH-T959V using xda app-developers app

hechoen said:
What where you flashing with odin? First thing I would check is to make sure your battery has charge. These phones are really hard to brick but it can happen.
Click to expand...
Click to collapse
The stock rom, i was trying to flash the 2e recovery, but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Thanks for the reply, i will try to recharge the battery and see if the pc recognizes.
---------- Post added at 11:06 AM ---------- Previous post was at 10:54 AM ----------
champ1919 said:
When you insert battery, does the computer see the phone? Sometimes, even with the black screen, you are still in dl mode.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
I can not tell ,will try that after charge battery, thanks.

but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Wish you luck. Sounds like wrong firmware. If you have the sgs4g, use the link from first post and try the one click.
Sent from my SGH-T959V using xda app-developers app

champ1919 said:
but it was bad because after the recovery the phone was saying it was another galaxy s model, i can't remember t9000 whatever... after that, the screen was buggy ( various colors in the screen), and finally decided to go back to stock, the process was almost complete but before it finish says failed! so i disconnect the phone and restart it, and it did not turn on.
Wish you luck. Sounds like wrong firmware. If you have the sgs4g, use the link from first post and try the one click.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Ok, I just did that, and the phone does not apear connected in the comand prompt and in Heimdall, what can i do?
Thanks in advance!

Related

need some help urgent plz

i think i bricked my phone..i was trying to flash CM7 so first i went to stock 2.1 for safety and then by mistake i flashed a 2.2 kernel the phone stuck at atnt screen.luckily i was able to get to recovery screen,so next i tried to follow CM7 instructions first i flashed efs backup in recovery and i rebooted to download mode from recovery itself coz i wasnt able to go to download mode directly.and when i selected the kernel and flashed it said "FAIL"..i removed the usb and connected again it still said fail..i thought that i need to go to download mode again so i removed battery and now whatever i do i get a screen with "phone ! pc" i tried so many things searching in this forum but nothing worked for me..someone please help me please please!!!
Sounds like you need a jig
Sent from my Captivate using XDA Premium App
The instructions clearly say that you're supposed to start from a custom rom and a kernel that has cwm. If you don't know what you're doing don't even attempt to flash.
As for a fix, it looks like jig time.
Sent from my SAMSUNG-SGH-I897 using XDA App
rurouni572 said:
The instructions clearly say that you're supposed to start from a custom rom and a kernel that has cwm. If you don't know what you're doing don't even attempt to flash.
As for a fix, it looks like jig time.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
try putting in the battery while holding both volume buttons and a usb already in. if that doesn't work, you will need a jig i guess
rnewton01 said:
try putting in the battery while holding both volume buttons and a usb already in. if that doesn't work, you will need a jig i guess
Click to expand...
Click to collapse
will jig definitely work? ill try to make one using the method posted here in forum..actually i already ordered it yesterday it may take a month before it reaches me i have no patience...!!

Samsung looping

phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?
aviationmech406 said:
phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?
Click to expand...
Click to collapse
Have you tried anything to fix this......??
if not just pull batt, hold power and both volume up/down at the same time....when the first samsung logo appears let go of power and continue to hold till you get into recovery. should be like 10 sec maybe 15
wipe data factory reset and you should boot past the loop....if not you most likely have to reflash or use the ultimate unbrick.
mine did this when i deleted the lagfix folder by accident (trying to fee up space) i ended up booting into red recovery and disabling voodo lagfix, rebooted then went back in to recovery and re enabled it.
Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?
aviationmech406 said:
Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?
Click to expand...
Click to collapse
Did you get this working? When I was running Infused I had to repeatedly do battery pulls and the three button meth. to get the recovery. Should seriously try to get recovery to start before doing a back to stock.
As for Odin recognizing the phone, did you make sure you have the kies with the drivers installed, did you try different usb ports and/or computers caus sometimes the drivers act funky. Have seen other people have problems with Odin and the drivers.
Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?
I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?
aviationmech406 said:
Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?
Click to expand...
Click to collapse
Even on stock? Ive seen this problem with custom roms like dlevrom 5.0 but not on stock? Cruise over there and see what he did to fix it. I believe there is a program called fastfix to force the locales to show up with North America. Nevertheless, check your locale and text in settings to make sure if the correct locale for your area is shown. If not there is a program in the market to force the correct one. Sorry, dont recall the programs name. Maybe the fastfix or fasterfix.
Sent from my SAMSUNG-SGH-I997 using XDA App
Astirnon said:
I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?
Click to expand...
Click to collapse
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App
Pull battery plug in USB cable hold volume s power buttons insert battery should put you at download screen to odin to stock.
Sent from my SAMSUNG-SGH-I997 using XDA App
JLR9914 said:
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.
aviationmech406 said:
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.
Click to expand...
Click to collapse
Sounds like the rainbow thing peeps were getting when they used gb leaks with the froyo bootloaders? You are still booting up fine so that is good. Head over to one of the leaks like UCKJ2 or 4 and study first because the gb bootloaders might solve your rainbow but they are to be used with caution, you could brick your phone real quick.
Sent from my SAMSUNG-SGH-I997 using XDA App

[Q] Sidekick 4G Bricked!!!!!!! odin dosent work

tried installing glorious overdose but I tried to wipe data, and it stayed there for about 10min so i pulled out the battery. i tried a second time but without wiping data (i didnt know WTH i was thinking) so it rebooted and was stuck at boot screen saying create new partition and system not avaliable (sumthing like that) so i decided to try odin so i can go back to stock firmware and it finished and now it stays at the bootscreen blinking i tried recovery im stuck.
before you odin, reinstall the phones drivers on your pc. connect the phone to the pc without the battery, hold the volume down button and the trackpad and reinsert the battery. when you odin, make sure only auto reboot is checked, and put the pit file in the pit slot and the tar file in the pda slot. if you use kies to update firmware, reinstall drivers again before updating.
You may need to check "Re-Partition" in Odin.
shouldnt need to repart, in fact it may be a bad idea. every time i odined and accidentally had repart checked, it screwed something up. most recently the stock messaging app didnt work after odin. i have since switched to go sms, but still made sure i had a clean firmware install. i would try odin without repartitioning first and see how that goes. if something is wrong, you can always odin again. the first time i tried to flash a rom i bricked because i flashed cwm through rom manager. the thread where i found the odin file said make sure only auto reboot is checked. besides, if the rom didnt flash correctly, then it didnt convert any partitions anyway.
ok i had the same problem for the first time i tried to install a custom rom, theres a way that you can fix it with out odin. follow this steps... i promise it will work.
1)boot into the red cwm voodoo lagfix recovery
2)wipe data/factory reset
3)wipe cache partion
4)after all the steps above are completed, go to apply sdcard:update.zip
the its going to take you to the regular cwm once there follow this steps...
1)install the custom you want to install, but make sure that it doesnt need special mounts and unmounts, so follow the instruction flash the rom and it should fix it
Heimdall worked perfectly when I bricked my phone.
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
WolfV2 said:
Heimdall worked perfectly when I bricked my phone.
Click to expand...
Click to collapse
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
flashing bootloader in that package doesn't break it.
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
My advice is do whatever it takes, and besides, don't worry about breaking something that's already broken, if you know what I mean...
johnwazhere said:
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
Click to expand...
Click to collapse
No problem, glad I could help
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
This is my current problem as well, except I have tried checking flash bootloader and have also tried Odin, but all to no avail. Can anyone help me? This is my situation:
I've had my sidekick for about a year now and have gone through the typical problems of a sidekick user. Then yesterday, my sidekick's alarm woke me as normal, but I was unable to turn it off because my touch screen wasn't working. So i battery pulled, restarted, and noticed that the screen stayed on the "T-Mobile Sidekick 4g SAMSUNG" start up screen and did not budge. I tried battery draining, more battery pulling, and nothing worked. So i did a lot of research on here and other websites and decided to use Odin. After initial problems of a newbie, I eventually figured it out and got it to RESET and PASS, but the subsequent reboot only caused my phone to be stuck in the same Sidekick start up screen it has been getting stuck in. Similarly, after many tries, Heimdall has done the same for me. Sorry if that was a long read (also, I hope its cool that i bumped this thread with my own problems), but is there anything else i can do? I'd really like to use my phone again..
I've been working for hours trying to figure out how to fix it, and I just don't know. The end result is always just the freezing at the t-mobile start up screen..Also, since i forgot to mention, I can only get into download mode with the volume down+trackball method because otherwise it would just go to the regular start up screen and freeze. I don't know if that means anything, but yeah.
Have you used heimdall yet? I bricked my SK4G the other day when flashing a rom and heimdall put it back to stock within 5 minutes of me bricking it.
Thank you for replying. Unfortunately yes, I did. With flash bootloader unchecked and checked. It says it disconnects after everything is done and it restarts, only to become frozen at the start screen again =/. I don't know if there is some silly detail that im missing that makes the flash rather than just restart, but all i can manage to make it do is restart.
Sigh. Guess im going phone shopping.
How did u get the phone in dl. Mode
Sent from my SGH-T839 using XDA
I had to plug the phone into my computer without the battery, hold volume and the track ball, then pop the battery in. Any other attempts would simply start it up/freeze it.
Ok did u have heimdall started first?
Sent from my SGH-T839 using XDA
And what rom did u last have?
Sent from my SGH-T839 using XDA
I'm not entirely sure if I had it started first, so I'll try it that way now. And the last ROM that I had? Honestly not really sure what that means =p, but i've never flashed one and I had the most recent sidekick update installed (though it is possible that I had done a factory reset at some point to fix an error).
---------- Post added at 01:04 PM ---------- Previous post was at 12:45 PM ----------
Just tried it. Without flashing bootloaders, it finishes and restarts to my frozen start up screen as normal. However, when i flash bootloaders, it gets to "uploading pit", but the upload fails and it reboots my phone. But this time, it reboots into download mode. A welcome change from my start up screen. Maybe there's hope.

GS3 Stuck on Samsung Logo

I have been looking at forums and have not been able to find a workable solution. I rooted my GS3. I created a backup, wiped data, and tried to restore from backup. When i tried to restore, it said that an error occurred. I tried wiping data and cache again and rebooting, but the phone stays on the Samsung logo. Any assistance would be greatly appreciated.
Wipe data and reflash rom or odin back to stock and start over.
Tried Odin but it won't recognize my device. I boot my phone into CWM and try flashing Odin, but it cannot find the phone.
cmatg said:
Tried Odin but it won't recognize my device. I boot my phone into CWM and try flashing Odin, but it cannot find the phone.
Click to expand...
Click to collapse
1)Open Odin on your computer
2) turn off your phone
3) Hold: power button, volume down, and home button. This takes you to download mode.
4) Now connect your phone to your computer.
Sent from my SCH-I535 using xda app-developers app
Thank you so much. I have no idea why i forgot to boot into download mode. after rooting 4 different devices, i would have expected better from myself.
cmatg said:
Thank you so much. I have no idea why i forgot to boot into download mode. after rooting 4 different devices, i would have expected better from myself.
Click to expand...
Click to collapse
Haha gotta start somewhere. Everything installing ok via Odin?
Sent from my SCH-I535 using xda app-developers app
Everything worked perfectly from Odin. Such a great help. Sorry for the late response. I have a seven-day old that is taking up some of my attention. . Thanks again, all! I can't express my full appreciation.
cmatg said:
Everything worked perfectly from Odin. Such a great help. Sorry for the late response. I have a seven-day old that is taking up some of my attention. . Thanks again, all! I can't express my full appreciation.
Click to expand...
Click to collapse
Congrats on the seven day old! Stay away from xda in the meantime haha gotta have a stable phone for family pictures!
Sent from my SCH-I535 using xda app-developers app

[Q] Help Me I really effed up!

Good Morning Everyone, This is my first post. I try to never post just read. I have read and read but to no avail. I have a AT&T Samsung infuse 4g. it WAS running froyo. What I mean by WAS, is that I was trying to install the modded 3e recovery so I could install clockworkmod recovery. During this process I read that I need to mount the /system partition as read/write I did this using the tool box that was created by some of your developers. It is awsome by the way. Well I did that and put a new recovery file in the /bin but it did not work as the website claimed so I thought well I should delete the old one. Bad Idea when I did the reboot it stopped me at the samsung screen. I tried to hard reboot it pulled the battery talked to it with a really kind voice and nothing happend. So I decided to use GEG's Ultimate Unbrick because this has worked for me in the past when i have messed up. So I put my phone into download mode and started the process with Odin. And here is where it gets bad.... one of my children was talking with me during the process and he decided to unplug my phone.. AHH EFFFFFF! I thought. Well when I tried to fix it it was to late. My phone will no longer turn on or even pretend to start. I am broke and cannot afford a new phone plus my wife would kill me seeing we have 6 children and it is right before christmas if I came home with a new galaxy note 2 Please Please can any one help a desperate dad with a busted Samsung Infuse. Thank you all for this awesome website that has taught me alot.. Please dont kill me for posting something someone has already posted because I could not find anything that was helpful for this situation with my phone.
Xda is awesome!
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
MerkTheMedia said:
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
Click to expand...
Click to collapse
Awesome! Glad you got your phone functioning again. Being persistent in searching and reading and trying to find answers usually results in good outcomes. :thumbup:
Sent from a de-Funkt Infuse
Okay now I have really done it this time. So I worked a 18 hour day and thought well instead of getting some rest i will install Gingerbread on my infuse. To make a long story short while I was using odin to install it paused for a long time at the format stage, so I thought well I will just turn it off even though it says not to and then.....well it did a rainbow colored screen I tried to figure it out last night with no luck. So I have been working on it all morning the rainbow screen is gone but now it just goes from black to all white screen. I have tried every possible way to get into download mode with no luck. Am I screwed or what? Does anyone have any suggestions. If I am out of luck does anyone know if bestbuy's warrenty covers rooted phones that are [email protected] bricked?
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
saxk said:
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
MerkTheMedia said:
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
Click to expand...
Click to collapse
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
qkster said:
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
Click to expand...
Click to collapse
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
MerkTheMedia said:
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
Click to expand...
Click to collapse
You're too kind, Merk.
I'm not sure what happened to your phone. The Infuse is pretty sturdy. Flashing should not cause much of an issue. The faulty power button and corrosion of the circuit board were the most I've seen reported.
This is what I use to force the phone into download mode:
http://www.ebay.com/itm/Micro-USB-J...665854?pt=PDA_Accessories&hash=item3f201c4f3e
Once in DL mode, it's a matter of choosing Odin or Heimdall to bring it back to stock.
One other thought, try a different battery as well.
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
Well im going to give it a shot I still have the old infuse I tried to make my own jig which didnt work for me so I took it into bestbuy and they gave me a brand new phone and in all of the hustle and bustle of christmas shopping going on around me they did not take my bricked infuse so now I have a spare to tinker with. Thanks I will definately give it a try and report with my findings
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
okay I tried but that didnt work either. Can you go ahead and explain "exactly" what you did maybe it will work!
Thanks again for everyones help!
Ok first I downloaded the unbrick package from this website. I downloaded the drivers for the infuse (not sure exactly where I got them from). I would just Google them. Then I tried every USB port on the laptop. Then switched cables and it finally worked. Opened Odin 1.7 and clicked pit, then flashed. Then I unplugged it, took the battery out and put back in and tried to boot. Didn't work. Then flashed PDA. Did same steps as before and still didn't work. Then flashed phone file. Tried to boot and still didn't work. Then I flashed all 3 files at once. Also, not sure if you know or not but the only thing that should be checked in Odin is f: reset time. Then the phone booted up and it stayed on at&t screen for about 5 minutes then finally came on. Also, you could also try to flash this other PDA file on there. I have the link saved on my computer but I'm not at home right now so I'll have to post that later. In easier steps
1. Put phone in Download mode and plug into pc.
2. Run Odin as admin and only thing checked is f reset time.
3.Flash pit then try to boot
4. Flash PDA then try to boot
5. Flash phone then try to boot
6. Flash all three at once
7. After flash While in download mode, unplug USB cable, take battery out and put back in
8. Reboot phone.
Sorry everything is all jumbled, I just got back to my home state from a road trip and I'm running on about 6 hours of sleep in 3 days. I hope this works for you. Also, there is a video on YouTube of a unbrick service for the phone. Its $30. I personally would not try it but its just an idea if you would want to.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the issue where I had the phone, the exclamation mark, and the computer symbol (The Black Screen of Death: Imaged Attached), that is all it would show when I turned it on. I thought the phone was completely bricked until I did the following, which put it into a hidden download mode and allowed ODIN to recognize it. I DID NOT NEED TO BUY A USB JIG.
1. Make sure you have Odin already downloaded and ready to go.
2. Remove the SIM and SD Cards
3. Load up Odin and make sure it is up and running on the computer. DO NOT plug your phone into the computer yet.
4. Reinstall the Battery and plug the phone to the USB cable to the computer.
5. Hold down both Volume keys and then push and hold the power button
6. Keep holding the buttons until it goes to black, KEEP HOLDING A SECOND TIME until it goes to black and the icon comes back on.
7. Now when it goes Black the second time release the Power button only.
8. You should now be in Download mode. The key is holding the buttons, letting it go to black once, and then letting it go to black again, and then release only the power button while your fingers are still on the volume buttons.
9. Now Odin should recognize the phone on a Com port (turn yellow).
10. You are now ready to return it back to stock.
I hope this helps!
did you ever get your infuse fixed man?
Sent from my SAMSUNG-SGH-I747 running CM10 JB 4.1.2 using xda premium
Yes I tried to make my own jig but my fat shaky hands could get the end of the wires to hit the correct contacts so I ordered one online and that got me into download mode! Now I'm running jelly bean! Thanks to everyone that helped out I love you guys!!!! PS. Don't skip backing up your efs folder!! Unless you want a headache. But with all my problems it has taught me a lot. My number one tip is to read read read there is always an answer! Thanks again everyone! Always hit the thanks button its the least we can do for all of these brilliant hard working developers.
Sent from my SGH-I997 using xda app-developers app

Categories

Resources