First of all, you agree that you are doing
this in your responsibility, be careful how
you use this recovery. If anything goes
wrong it's your own fault.
Instructions:
1. Enable USB Debugging by going to
Menu -> Settings -> Applications ->
Development - Enable USB Debugging.
2. Download the CWM Recovery file + scatter file
recovery file download from here and scatter file from attachment
http://forum.xda-developers.com/attachment.php?attachmentid=1358551&d=1348750752
3.here is tutorial how to flash cwm recovery on mmx a45 using sp flash tool
http://droidpunk.wordpress.com/2012/10/02/how-to-use-sp-flash-tools-for-mmx-a45-3/
4. download all mtk drivers from this post
http://forum.xda-developers.com/showthread.php?t=1684690
4. Switch off your phone.Then boot into
recovery mode, you should be familiar if
you have rooted your phone. If not, then
hold Volume up button + Volume down button + Power button simulatenously.
5.After you boot int Recovery, you can
only use buttons to move. For up/down
use volume up/down, to do a selection
you press the Search button.
note:- put scatter file and recovery files in same folder
credit goes to prashanthca he make cwm for mmx a45
http://forum.xda-developers.com/member.php?u=4860387
sahil11 said:
first of all, you agree that you are doing
this in your responsibility, be careful how
you use this recovery. If anything goes
wrong it's your own fault.
Instructions:
1. Enable usb debugging by going to
menu -> settings -> applications ->
development - enable usb debugging.
2. Download the cwm recovery file + scatter file
recovery file download from here and scatter file from attachment
http://forum.xda-developers.com/attachment.php?attachmentid=1358551&d=1348750752
3.here is tutorial how to flash cwm recovery on mmx a45 using sp flash tool
http://droidpunk.wordpress.com/2012/10/02/how-to-use-sp-flash-tools-for-mmx-a45-3/
4. Download all mtk drivers from this post
http://forum.xda-developers.com/showthread.php?t=1684690
4. Switch off your phone.then boot into
recovery mode, you should be familiar if
you have rooted your phone. If not, then
hold volume up button + volume down button + power button simulatenously.
5.after you boot int recovery, you can
only use buttons to move. For up/down
use volume up/down, to do a selection
you press the search button.
Note:- put scatter file and recovery files in same folder
credit goes to prashanthca he make cwm for mmx a45
http://forum.xda-developers.com/member.php?u=4860387
Click to expand...
Click to collapse
hi dear all a45 user
i create a rom for a45 ,
but i dont have micromax a45 device so need test before release
so...... Please pm me here for test
[email protected]
[email protected]
minimum requirments
1. Cwm installed
2. Make sure that u have created nandroid backup of your stock rom in your sd.
...
BHARDIK said:
hi dear all a45 user
i create a rom for a45 ,
but i dont have micromax a45 device so need test before release
so...... Please pm me here for test
[email protected]
[email protected]
minimum requirments
1. Cwm installed
2. Make sure that u have created nandroid backup of your stock rom in your sd.
Click to expand...
Click to collapse
when u make rom for a45 u get bootloop and rom flashing method is different for mmx a45 my rom also ready
ok then tell me that methods u got, i just wanted to know.
Sent from my A90S using xda premium
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2
kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.
sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.
kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2
Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956
Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT
violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery
Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!
Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.
AFTER INSTALLING TWRP RECOVERY FROM THE BELOW STEPS OR IF INSTALLED CWM FROM MY EARLIER POST THEN FIRST TAKE AN BACKUP SO THAT YOU CAN RESTORE IF ANY ERROR HAPPENS BECAUSE I DONT HAVE THE ORIGINAL COPY OF THE OS..
AND IF YOU HAVE INSTALLED CWM FROM MY ROOTING METHOD THEN SKIP ALL THE BELOW STEPS AND DIRECTLY DOWNLOAD THE ROM AND INSTALL IT BY PLACING IT IN SD CARD AND FLASHING IT
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/...l_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/show....php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on a119 hd not Q hd
screenshots please
Can you post screenshots plz?
sure...
can we apply this rooting method and ROM for the quadcore(a119q) version too?
Yes give a try...it may work...and report back...
There is good for 119q version version which is quite easy
Sent from my Celkon A119Q using Tapatalk 4 Beta
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Coz quad core uses different chipset
Sent from my Celkon A119Q using Tapatalk 4 Beta
Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!
techpick said:
Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!
Click to expand...
Click to collapse
Please follow this thread for your device custom ROM.
http://forum.xda-developers.com/showthread.php?t=2374660
Press thanks button if it's helpful.
Sent from my Nexus 7 using Tapatalk 4
Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!
techpick said:
Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!
Click to expand...
Click to collapse
What happened? Are you having issues with flashing CWM recovery?
Sent from my Nexus 7 using Tapatalk 4
Yes. Basically got it rooted. Then I had issues with flashing recovery and in a hurry I think I screwed it up by installing a wrong recovery using mobile uncle. Now neither can I hard reset my phone not can I go to recovery. If I try doing hard reset, it does all the process but once the phone switches on, it comes back to the situation where in I started with resetting. I know it was stupid of me to screw up the recovery, but please help dude.
Sent from my Celkon A119Q using xda app-developers app
Issue Sorted!
CWM Recovery 6.0.4.4 for SPICE MI 535
CWM 6.0.4.4 with touch buttons menu. It has all functionality of CWM Recovery, and 1 added extra feature, Aroma File Manager support.
Requirements:
1.Root and MOBILE UNCLE TOOLS APP(if u want to flash through Mobile)
2.Sp Flash Tool(If u want to flash it From PC)
Downloads:
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 2.2)
http://d-h.st/I3l
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 2)
http://d-h.st/UM7
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 1.1)
http://d-h.st/TFi
CWM Recovery 6.0.4.0
http://d-h.st/pXD
https://rapidshare.com/download/share/1E9C7DB102DA653756BFAB4C59B13B01?_e_pi_=7,PAGE_ID10,4600211908
https://docs.google.com/file/d/0B_FSn054nUXkZzJLM0c4eEdkV0U/preview
Instructions for flashing in your phone:
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash recovery file
4.Done
Instructions For getting Aroma File manager in CTR
1.Download the flashable zip from here
2.Extract to root of your SD card
3.Next boot into recovery goto Carliv option and Choose Aroma File manager
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone using SPICE MI 535 Driver.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
CREDIT
@michfood
@yuweng
@carlivfor his CTR Recovery
@amarullz- For AROMA File Manager
@ suhas.holla
@Mtkdroidtools
Press thanks button and feel free to DONATE if you want to encourage my works.
USERS AND DEVELOPERS OF SPICE MI 535 ANDHIKE 818 ARE WELCOMED TO JOIN THIS GROUP:https://www.facebook.com/groups/218101215033991/
It works bro. thanks.
I'll add it in device working list.
@Carliv
Sorry brother if its hurt's you . The intention behind porting this is only that people who are using SPICE MI 535 may use this and benefited. Sorry again bro.
Atrvscet said:
Sorry brother if its hurt's you . The intention behind porting this is only that people who are using SPICE MI 535 may use this and benefited. Sorry again bro.
Click to expand...
Click to collapse
I know. That's the reason I made all these (guide, ported resolutions, and so on) to help as many people as I can, to get a custom touch recovery in their phones. But is not very easy to accept to be removed from your work.
It's ok now that you added proper credits.
carliv said:
I'll add it in device working list.
Click to expand...
Click to collapse
Ok, bro.
Am making this post to solve A120 users problems and anybody can post their questions and i will surely try helping in finding them the solution and fixing the issue
Thanks to @drprateekluthra for suggesting me to make this tutorial
Most of the users dunno how to flash stock roms or change the base and flash clones stock roms n all...
So here is the tutorial to flash wiko stock rom on A120.. u can use this procedure to flash any stock rom on MTK device
1. U need drivers for the phone..
Download from here -> A120 DRIVERS
2. U need SP Flash Tool to flash the rom..
Download from here -> SP flash tools
3. U need Stock SP flashable Rom
Download WIKO Kitkat from here -> WIKO KitKat
4. Install the drivers in your laptop/pc if its windows 7 you wont have any problem but if its windows 8 or 8.1 then follow this tutorial to install drivers -> How to install drivers on windows 8?
5. Extract SP tools and rom.zip in some folder..
6. open Sptools folder and run Flash_tool application and a window will open..
7 Click on Scatter-Loading and go where you have extracted the rom.zip and select the MT6582_Android_scatter.txt or scatterfile.txt
8. Now select Firmware Upgrade and Click on Download Button..
9. Now switch off your phone and take out the battery and connect your device to the laptop/pc via data cable [Make sure USB-Debuggins is on]
10. Wait for few minutes and you will get the stock rom flashed..
11. Disconnect the device and insert the battery and switch on your phone and wait for sometime.. it might take few mins to boot.. so just dont freak out..
12. Its done
Enjoy the rom
So many people asked me to make a tutorial to flash vionicL on wiko base.. So here it is
How To Flash VionicL on any base?
1. Download the Rom from here and Hit thanks -> VionicL original thread
2. Keep the zip in root of your SD card
3. Reboot into Recovery by holding volume up, volume down and power keys together and then press volume up button for recovery mode
4. This will boot into recovery
5. Now go to wipe and format options and wipe Data, Cache & Dalvik Cache
6. Now go back and select install zip from SD then choose zip from storage/sdcard1
7. Select the rom and press yes
8. Now wait for installation and then press back button and select reboot device
9. Sit back and relax it might take few mins so dont freak out
10. Enjoy the ROM
So manyPeople Texted me and asked me how to fix their IMEI problem
How to solve IMEI issue?
Here is a tutorial to fix IMEI problem Follow this -> IMEI FIX
or else folow this tutorial -> IMEI FIX
Anything else? Feel free to post here and ask I will surely try helping you
Post your problems or questions in this post.. I will try replying for every simgle peson
HIT THANKS IF AM HELPING YOU [/CENTER]
Anyone? Having difficulties mounting usb storage in VionicL?
ktsarlz said:
Anyone? Having difficulties mounting usb storage in VionicL?
Click to expand...
Click to collapse
enable usb debugging and connect to laptop and use MTP[media device]