Would like to know if recoveries support this?
So instead to ADB push the files everytime I re-flash, just have it on my USB drive and just install it that way...
gd6noob said:
Would like to know if recoveries support this?
So instead to ADB push the files everytime I re-flash, just have it on my USB drive and just install it that way...
Click to expand...
Click to collapse
Yes, you can mount the otg in recovery
Sent from my Nexus 5
jd1639 said:
Yes, you can mount the otg in recovery
Sent from my Nexus 5
Click to expand...
Click to collapse
thanks...
Another question about OTG.. does the Nexus 5 able to provide enough power to use a 4 port USB hub?
gd6noob said:
thanks...
Another question about OTG.. does the Nexus 5 able to provide enough power to use a 4 port USB hub?
Click to expand...
Click to collapse
Don't know the answer but I would doubt it.
Sent from my Nexus 5
gd6noob said:
thanks...
Another question about OTG.. does the Nexus 5 able to provide enough power to use a 4 port USB hub?
Click to expand...
Click to collapse
Depends what you're connecting and what kind of hub it is
Sent from my Nexus 5 using Tapatalk
Some days ago i tried to mount the OTG on CWM Official but i failed! Can someone explain to me what i need to do? I want only to make nandroid on OTG!
gd6noob said:
Would like to know if recoveries support this?
So instead to ADB push the files everytime I re-flash, just have it on my USB drive and just install it that way...
Click to expand...
Click to collapse
jd1639 said:
Yes, you can mount the otg in recovery
Sent from my Nexus 5
Click to expand...
Click to collapse
I can back this. With TWRP you can save backups directly to your USB OTG storage, which I find extremely handy. Not sure about other recoveries though...
Sent from my Nexus 5 using Tapatalk
rootSU said:
Depends what you're connecting and what kind of hub it is
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Keyboard, mouse and flash drive.. what hub would be best?
This is the hub Im looking at Startech Mini 4 Port USB 2.0 Hub
gd6noob said:
Keyboard, mouse and flash drive.. what hub would be best?
This is the hub Im looking at Startech Mini 4 Port USB 2.0 Hub
Click to expand...
Click to collapse
That's the hub I've got. I'll test later with those 3 things.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
SedyBenoitPeace said:
Some days ago i tried to mount the OTG on CWM Official but i failed! Can someone explain to me what i need to do? I want only to make nandroid on OTG!
Click to expand...
Click to collapse
Its not an option in cwm itself I don't think. You'd need philz or twrp
Sent from my Nexus 5 using Tapatalk
rootSU said:
Its not an option in cwm itself I don't think. You'd need philz or twrp
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I should have clarified that I use twrp.
Sent from my Nexus 5
rootSU said:
That's the hub I've got. I'll test later with those 3 things.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Its not an option in cwm itself I don't think. You'd need philz or twrp
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ok thanks! I see someone on YouTube that has the clockworkmod working(on HTC One) with otg maybe it's a fake! I will install twrp! Is there something to do on recovery when I plug the otg? Thanks for all!
Inviato dal mio fantastico Nexus 5 con Franco's kernel
rootSU said:
That's the hub I've got. I'll test later with those 3 things.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks @rootSU
This is the video I saw and he had a hub connected.. it didnt see like it had an AC power connected..
http://www.youtube.com/watch?feature=player_detailpage&v=gZwPgyiEb84#t=292
There's nowhere to plug ac power into it
Sent from my Nexus 5 using Tapatalk
So i just bought the otg cable and that startech hub.. It works.. It read my flssh drive.. Just gotta wait til i get home to try keyboard, mouse and gamepad.. Does any gamepad work?
Sent from my Nexus 5 using Tapatalk
rootSU said:
Its not an option in cwm itself I don't think. You'd need philz or twrp
Click to expand...
Click to collapse
It may not be an option in the official CWM but Playfulgods unofficial swipe builds have it working. No need to mount it. It auto mounts after plugging in the OTG. It's my recovery of choice for the N5. I've been using his version 6.0.4.5 for a long time now without any issues.
theesotericone said:
It may not be an option in the official CWM but Playfulgods unofficial swipe builds have it working. No need to mount it. It auto mounts after plugging in the OTG. It's my recovery of choice for the N5. I've been using his version 6.0.4.5 for a long time now without any issues.
Click to expand...
Click to collapse
Oh ok.
Philz automounts too
Sent from my Nexus 5 using Tapatalk
rootSU said:
Oh ok.
Philz automounts too
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
+1 for Philz!
OTG works in TWRP but needs to be manually mounted..
Related
hi
my sony smartwatch 2 is working fine i only need to update the firmware.by using sony software updater when i plug in usb and press power button nothing happens and its a black screen.and shows on pc usb not recognised...
Have you tried all the USB ports on your computer? Some of my accessories are only recognized on specific ports of my Dell...
Sent from my GT-N7100 using xda app-developers app
Tonio78370 said:
Have you tried all the USB ports on your computer? Some of my accessories are only recognized on specific ports of my Dell...
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
yes i tried all three ports...uninstalled the driver aswell from device manager
The Sony Smartwatch firmware updates automatically via the Bluetooth connection with the phone. My watch updated its firmware the first time I paired it with the phone and had the software installed. Is there a particular reason to struggle with the USB method?
Mine did the same. Checked this morning through USB just to see but was up to date.
I don't think it's necessary to struggle with the USB as it'll come automatically through Playstore and Bleutooth.
I uninstalled...
Sent from my GT-N7100 using xda app-developers app
jonstatt said:
The Sony Smartwatch firmware updates automatically via the Bluetooth connection with the phone. My watch updated its firmware the first time I paired it with the phone and had the software installed. Is there a particular reason to struggle with the USB method?
Click to expand...
Click to collapse
What's your software version?
Sean473 said:
What's your software version?
Click to expand...
Click to collapse
My version is " 1.0.b.0.60" how about you guys?
MikeKKLau said:
My version is " 1.0.b.0.60" how about you guys?
Click to expand...
Click to collapse
:laugh::good:my software versioon is same as yours " 1.0.b.0.60"...
jonstatt said:
The Sony Smartwatch firmware updates automatically via the Bluetooth connection with the phone. My watch updated its firmware the first time I paired it with the phone and had the software installed. Is there a particular reason to struggle with the USB method?
Click to expand...
Click to collapse
thanks... i didn't knew about the Bluetooth update
zargham khan said:
:laugh::good:my software versioon is same as yours " 1.0.b.0.60"...
Click to expand...
Click to collapse
We are all the same If any future update arrives, you will be able to update it through the phone app.
zargham khan said:
:laugh::good:my software versioon is same as yours " 1.0.b.0.60"...
Click to expand...
Click to collapse
Same here...
dead after failed update
I tried to update thought sony update service. the update failed and now the watch won't turn on. it isn't recognized by usb anymore. anyone any idea how i can get my watch going again.
i tried holding the power button for a long time
Sean473 said:
Same here...
Click to expand...
Click to collapse
Mine is 10.B.3.46
Sent from my HTC One using Tapatalk
mjybarr said:
Mine is 10.B.3.46
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
same here
mjybarr said:
Mine is 10.B.3.46
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
+1
My Software: 10.B.3.46/1.0.A.3.8
Sent from my C6906 using XDA Premium 4 mobile app
zargham khan said:
:laugh::good:my software versioon is same as yours " 1.0.b.0.60"...
Click to expand...
Click to collapse
Hmm, that's curious, mine is still at .46, .80 is supposed to be the big update so I wonder what .60 is? Any noticeable changes on your watch? Could you head to the Play Store on your phone and check the version number of the SmartWatch 2 app from Sony, not Smart Connect. Mine is showing as 13 Dec, the 1.3.19 version.
As far as I am aware, there are no USB drivers for the smartwatch, so trying to plug it in to your PC shouldn't get you very far at all, unless there's some new tool from Sony I don't know about.
Tom.
toyface said:
Hmm, that's curious, mine is still at .46, .80 is supposed to be the big update so I wonder what .60 is? Any noticeable changes on your watch? Could you head to the Play Store on your phone and check the version number of the SmartWatch 2 app from Sony, not Smart Connect. Mine is showing as 13 Dec, the 1.3.19 version.
As far as I am aware, there are no USB drivers for the smartwatch, so trying to plug it in to your PC shouldn't get you very far at all, unless there's some new tool from Sony I don't know about.
Tom.
Click to expand...
Click to collapse
The one you quoted was the old firmware. Look carefully in your firmware version. There is a 3 instead of a 0 somewhere which makes yours the latest at the moment.
Sent from my HTC One SV using Tapatalk
1.0.B.3.46
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Damurray616 said:
1.0.B.3.46
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1
I tried 2 different portable USB fat32 / NTFS (500GB) neither of them worked. I tested the fat32 with note 3 N900 and note 10.1 2014 both worked with no problems.
Help needed is it hardware or software issue ?
Test and feedback
Note Pro 12.2 owners pls test and advice.
If you are rooted, try installing Stickmount from the Play Store.
Sent from my SM-P900 using Tapatalk
Rooting Will Void warranty so I need some body to test before I send it back for repair.
It's a permissions problem. Only way I could fix is root and use an app like stick Mount and folder Mount
Sent from my SM-P900 using XDA Premium HD app
Which format fat32 / NTFS worked ? Suggested root should I use safely ( 4G ) version.
link.
thanks & BR
icem237 said:
It's a permissions problem. Only way I could fix is root and use an app like stick Mount and folder Mount
Sent from my SM-P900 using XDA Premium HD app
Click to expand...
Click to collapse
Pls explain your problem and how you solve it. my mass storage keep Ticking sound (fat32) and the other one NTFS need external power. is it hardware problem or what ??
I am using a portable 500gb hard drive fat32 w otg cable....no issues.
Sent from my SM-P900 using xda app-developers app
souless poet said:
I am using a portable 500gb hard drive fat32 w otg cable....no issues.
Sent from my SM-P900 using xda app-developers app
Click to expand...
Click to collapse
Are you rooted?
Samsung Galaxy Note Pro 12.2 will not mount NTFS until SELinux is changed from Enforced to Permissive,this can only be done through Custom Kernel compiling.
I have managed to compile a custom Kernel and now I can change the tablet's SELinux from Enforcing to Permissive and vice versa and can also mount NTFS hard drives using Stickmount.
Those hard drives are available to any app that need to access them,like MX player or ES file explorer.
Please check the attached images
moodyboy said:
I tried 2 different portable USB fat32 / NTFS (500GB) neither of them worked. I tested the fat32 with note 3 N900 and note 10.1 2014 both worked with no problems.
Help needed is it hardware or software issue ?
Click to expand...
Click to collapse
Finally both Mass storage devices worked with the help of external power supply ( used the wall charger ) but what a hell of wiring. I can't believe that note pro 12.2 can't generate enough power to do the job? maybe some developer can write custom kernel with the correct permission I HOPE.
moodyboy said:
Finally both Mass storage devices worked with the help of external power supply ( used the wall charger ) but what a hell of wiring. I can't believe that note pro 12.2 can't generate enough power to do the job? maybe some developer can write custom kernel with the correct permission I HOPE.
Click to expand...
Click to collapse
What kind of otg cable are you using ? 5-pin or 10-pin? Because the 5 more pin of 10-pin otg cable delivers more power!
Sent from my SM-P901 using Tapatalk
francesco totti said:
What kind of otg cable are you using ? 5-pin or 10-pin? Because the 5 more pin of 10-pin otg cable delivers more power!
Sent from my SM-P901 using Tapatalk
Click to expand...
Click to collapse
5 pin OTG cable tested with note 3 & note 10.1 2014 edition both working smoothly.
Is your note P901 rooted? did u test it before rooting?
Thanks
moodyboy said:
5 pin OTG cable tested with note 3 & note 10.1 2014 edition both working smoothly.
Is your note P901 rooted? did u test it before rooting?
Thanks
Click to expand...
Click to collapse
I'm not rooted! and I'm using 10-pin otg cable! I have tried flash drive, mouse, Joystick and all of them worked fine!
Sent from my SM-P901 using Tapatalk
francesco totti said:
I'm not rooted! and I'm using 10-pin otg cable! I have tried flash drive, mouse, Joystick and all of them worked fine!
Sent from my SM-P901 using Tapatalk
Click to expand...
Click to collapse
I'm talking about USB Mass Storage Device (500GB +) not flash drive. I tested all kind of USB flash drive & wireless mouse all working smoothly.
moodyboy said:
I'm talking about USB Mass Storage Device (500GB +) not flash drive. I tested all kind of USB flash drive & wireless mouse all working smoothly.
Click to expand...
Click to collapse
I have a western digital 1Tb hard drive but I haven't tested it because it's NTFS!
Sent from my SM-P901 using Tapatalk
francesco totti said:
I have a western digital 1Tb hard drive but I haven't tested it because it's NTFS!
Sent from my SM-P901 using Tapatalk
Click to expand...
Click to collapse
You can use nexus media importer to read NTFS Hard drives.
moodyboy said:
You can use nexus media importer to read NTFS Hard drives.
Click to expand...
Click to collapse
it doesn't need root?
Sent from my SM-P901 using Tapatalk
francesco totti said:
it doesn't need root?
Sent from my SM-P901 using Tapatalk
Click to expand...
Click to collapse
no need for root
francesco totti said:
What kind of otg cable are you using ? 5-pin or 10-pin? Because the 5 more pin of 10-pin otg cable delivers more power!
Sent from my SM-P901 using Tapatalk
Click to expand...
Click to collapse
So no external power....500gb hard drive recognized by tablet... Powered by tablet. Yes rooted but nothing done other than some xposed mods.
Sent from my C6806_GPe using xda app-developers app
Hi here i bring to you TWRP Touch Recovery.
It looks like everything is working.
Main features successfully tested.
Installation:
flash it with flashify from play store or via fastboot using following command:
Code:
fastboot flash recovery a70x_twrp-2.7.1.0.img
Download:
a70x_twrp-2.7.1.0.img
Additional info:
official site including changelog
source
Device specific changelog:
look at my github it's up to date
Code:
20140707:
- change vold to auto to allow more fs
credits to pawitp and TWRP Team
just press thanks
XDA:DevDB Information
[A700/A701] TWRP Touch Recovery, Tool/Utility for the Acer Iconia A700 and A510
Contributors
Elibl
Version Information
Status: Stable
Created 2014-07-16
Last Updated 2014-07-16
Is there a chance to get an updated version. The reason why I am asking is that I always get errno=13 unable to create folder /external_sd/TWRP when I try to make a backup on my 64gb microsdxc with exFAT. It seems there is a problem in TWRP while writing on exFAT formatted flash media.
I would do it myself compiling TWRP from sources but this is far beyond my knowledge.
Greetings
Peter
Sent from my A700 using XDA Premium HD app
peter_altherr said:
Is there a chance to get an updated version. The reason why I am asking is that I always get errno=13 unable to create folder /external_sd/TWRP when I try to make a backup on my 64gb microsdxc with exFAT. It seems there is a problem in TWRP while writing on exFAT formatted flash media.
I would do it myself compiling TWRP from sources but this is far beyond my knowledge.
Greetings
Peter
Sent from my A700 using XDA Premium HD app
Click to expand...
Click to collapse
For sure going to compile as soon as i've got time I think I know the fix need to have a look just was to lazy to investigate it further
Gesendet von meinem Galaxy Nexus mit Tapatalk
peter_altherr said:
Is there a chance to get an updated version. The reason why I am asking is that I always get errno=13 unable to create folder /external_sd/TWRP when I try to make a backup on my 64gb microsdxc with exFAT. It seems there is a problem in TWRP while writing on exFAT formatted flash media.
I would do it myself compiling TWRP from sources but this is far beyond my knowledge.
Greetings
Peter
Sent from my A700 using XDA Premium HD app
Click to expand...
Click to collapse
what kind of rom are u using in which exfat is working??? shouldn't at all as i need to add exfat to kernel
peter_altherr said:
Is there a chance to get an updated version. The reason why I am asking is that I always get errno=13 unable to create folder /external_sd/TWRP when I try to make a backup on my 64gb microsdxc with exFAT. It seems there is a problem in TWRP while writing on exFAT formatted flash media.
I would do it myself compiling TWRP from sources but this is far beyond my knowledge.
Greetings
Peter
Sent from my A700 using XDA Premium HD app
Click to expand...
Click to collapse
please test if exfat is working:good:
but to be on the safe side don't have indispensable files on your card
i am using pawitp's cm11 m5 with its original kernel or iodaks 9.95 cm11 kernel. both provide exfat support for my microsdxc 64gb.
Sent from my LG-P880 using XDA Premium 4 mobile app
---------- Post added at 06:35 AM ---------- Previous post was at 06:34 AM ----------
I am traveling right now but as soon as I get home tonight I am going to test your recovery image. thanks a lot
peter
Sent from my LG-P880 using XDA Premium 4 mobile app
peter_altherr said:
i am using pawitp's cm11 m5 with its original kernel or iodaks 9.95 cm11 kernel. both provide exfat support for my microsdxc 64gb.
Sent from my LG-P880 using XDA Premium 4 mobile app
---------- Post added at 06:35 AM ---------- Previous post was at 06:34 AM ----------
I am traveling right now but as soon as I get home tonight I am going to test your recovery image. thanks a lot
peter
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Strange as I can't see exfat in the cyanogenmod t30 kernel may be possible to handle it from userland!?
Gesendet von meinem Galaxy Nexus mit Tapatalk
forget my comment about iodak kernel as I mixed it with my other android device. I am using original cm11 or z-kernel. but its true I have exfat support. maybe its what you say and it comes from a userland module.
Sent from my LG-P880 using XDA Premium 4 mobile app
peter_altherr said:
forget my comment about iodak kernel as I mixed it with my other android device. I am using original cm11 or z-kernel. but its true I have exfat support. maybe its what you say and it comes from a userland module.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ow damn maybe I just needed to change fstype to auto :silly:
i have tested the new image but no luck. same error message.
greetings
peter
Sent from my A700 using XDA Premium HD app
peter_altherr said:
i have tested the new image but no luck. same error message.
greetings
peter
Sent from my A700 using XDA Premium HD app
Click to expand...
Click to collapse
Can you give me a kmsg?
Gesendet von meinem Galaxy Nexus mit Tapatalk
Elibl said:
Can you give me a kmsg?
Gesendet von meinem Galaxy Nexus mit Tapatalk
Click to expand...
Click to collapse
hi elibl,
please find attached the recovery kmsg taken right after trying to make a nandroid backup to external_sd with exfat fs. kmsg also contains info about my attempt to copy kmsg.text from internal sdcard to external_sd (without any luck of course).
anything else i can do? just let me know.
greetings
peter
peter_altherr said:
hi elibl,
please find attached the recovery kmsg taken right after trying to make a nandroid backup to external_sd with exfat fs. kmsg also contains info about my attempt to copy kmsg.text from internal sdcard to external_sd (without any luck of course).
anything else i can do? just let me know.
greetings
peter
Click to expand...
Click to collapse
Exfat partition mounts fine it's selinux denying labeling of the partition. I need you to test some imgs to know what is necessary and what redundant when I'm ready with building them...
okidoki, i am ready. just let me know.
ps: just for my curiosity. i am going to test if the twrp 2.7.0.1 recovery of my lg o4x is doing the nandroid backup on external_sd with exfat. let's see...
peter_altherr said:
okidoki, i am ready. just let me know.
ps: just for my curiosity. i am going to test if the twrp 2.7.0.1 recovery of my lg o4x is doing the nandroid backup on external_sd with exfat. let's see...
Click to expand...
Click to collapse
it depends if it's supported in the source tree the recovery was built with or even supported from the kernel
this is with exfat as module from userland (pa just added it the last days ;-P) if it works this should be the best solution i think
bad news. i flashed the image with flashify and tried to make the backup. same error message as before. if you need another kmsg, let me know.
Sent from my A700 using XDA Premium HD app
ps: it worked on my lg o4x using twrp 2.7.0.1 and 64gb microsdxc with exfat.
peter_altherr said:
bad news. i flashed the image with flashify and tried to make the backup. same error message as before. if you need another kmsg, let me know.
Sent from my A700 using XDA Premium HD app
Click to expand...
Click to collapse
for sure always
well, almost as the version number of your builds always tells 2.7.0.0 i am not really sure wether the new version has been flashed or its still the old version. i trust in flashify as i did not get any error messages during flashing process.
peter_altherr said:
well, almost as the version number of your builds always tells 2.7.0.0 i am not really sure wether the new version has been flashed or its still the old version. i trust in flashify as i did not get any error messages during flashing process.
Click to expand...
Click to collapse
i ment for the kmsg that i need^^ but you're right i'll change the version the next time
ups. the classical misunderstanding going to get the kmsg...
hey guys,
I need some assistance please. I cannot get the USB OTG to work/enable in TWRP on my N920T Note 5.
I am running:
Darthstalker V6
SkyHigh TW v3.0
TWRP 2.8.7.1
I did some research on google and still, no USB OTG access. I am seeing the option but when i select it, it stays blank. I have ROMS and backups stored on my USB and would like to access them please.
many thanks in advance guys.
File
grymmy said:
hey guys,
I need some assistance please. I cannot get the USB OTG to work/enable in TWRP on my N920T Note 5.
I am running:
Darthstalker V6
SkyHigh TW v3.0
TWRP 2.8.7.1
I did some research on google and still, no USB OTG access. I am seeing the option but when i select it, it stays blank. I have ROMS and backups stored on my USB and would like to access them please.
many thanks in advance guys.
Click to expand...
Click to collapse
I just noticed that myself, in the same situation as you. This is wierd
I did some more research and still...unsuccessful. however, Philz is working perfectly. ..I can read and restore from saved back-ups from USB.
Did you guys mount the otg?
Sent from my SM-N920T using Tapatalk
Jammol said:
Did you guys mount the otg?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I didn't do that
---------- Post added at 02:05 AM ---------- Previous post was at 01:48 AM ----------
Jammol said:
Did you guys mount the otg?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Thanks @Jammol, that's what was missing. Did that and the items showed up in recovery in twrp
Jammol said:
Did you guys mount the otg?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I tried, but the box says blank. How do I get it to work?
Hi guys I came across the same problem, installing this version will fix it. https://www.androidfilehost.com/?fid=24052804347813095
Make sure ur using big biff top not the one that is floating around.
Sent from my SM-N920T using Tapatalk
After enter twrp ,connect USB otg device, then click mount usn otg , now its working.
BACARDILIMON said:
Make sure ur using big biff top not the one that is floating around.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
+1 There was another 2.8.7.1 where OTG didn't work if still can't get it working. Funny thing is I never have to mount my OTG and it always works.
When I connect my phone to my PC, it shows up as a MTP device.
How do I make it show up as a USB Mass Storage device (aka like a pendrive)?
Techguy18 said:
When I connect my phone to my PC, it shows up as a MTP device.
How do I make it show up as a USB Mass Storage device (aka like a pendrive)?
Click to expand...
Click to collapse
Simple, you can't... That hasn't been possible in Android for years.
Sent from my MotoG3 using Tapatalk
acejavelin said:
Simple, you can't... That hasn't been possible in Android for years.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
IIRC it works on the oneplus one.
Techguy18 said:
IIRC it works on the oneplus one.
Click to expand...
Click to collapse
Pretty sure it doesn't, unless OPO completely rewrote the USB volume mounting routines... Android support for it was completely removed in Jellybean or KitKat I believe.
Sent from my MotoG3 using Tapatalk
acejavelin said:
Pretty sure it doesn't, unless OPO completely rewrote the USB volume mounting routines... Android support for it was completely removed in Jellybean or KitKat I believe.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
MTP isn't nice to use, SMB servers are too slow.
Techguy18 said:
MTP isn't nice to use, SMB servers are too slow.
Click to expand...
Click to collapse
Not arguing with you, but it is what it is... http://www.howtogeek.com/192732/android-usb-connections-explained-mtp-ptp-and-usb-mass-storage/
Sent from my MotoG3 using Tapatalk