0-day CyanogenMod project [LTE-A] - Galaxy S 4 General

Received the device at 16:30.
Got home at 18:24.
CyanogenMod booted at 19:12.
0-day CyanogenMod project.
My development device is SHV-E330S, a Korean variant.
Which is almost identical to GT-I9506.
- Working list -
Almost everything including full H/W accelerated graphics
- Not working list -
Data (probably due to incorrect APN settings)
Wi-Fi (kernel modules are missing for now)
Proximity sensor
In-call audio
Screenshots attached.
Hit "Thanks" if you're excited!
- UPDATE 1 -
Several more stuffs seems to be broken.
mpdecision, accelerometer, gyro, compass, proximity sensors are broken.
With the auto brightness disabled, it causes kernel panic during boot.
Wi-Fi was rather hard to fix; considering S4 has bcm4335 but Note 3 has bcm4339. Porting jflte's Wi-Fi firmwares and libraries has fixed Wi-Fi and bluetooth.
ART is working with BaNkS' gapps. Scored 29751 with AnTuTu (probably due to mpdecision being broken)
- UPDATE 2 -
This is really bad.
Literally, all the sensors are broken.... Have no idea how to solve it yet..
Will take a look at sensor libraries..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- UPDATE 3 -
Victory!
Sensors are working very well
Now, In-call audio and kernel panic is left to be solved
- UPDATE 4 -
Kernel panic with brightness settings has been worked-around with dirty method.
This is not very ideal, but should be daily-usable until we find a more permanent solution.
Several more issues has been found.
Graphics is working smoothly but you may notice some studderings with video playback (eg. MXplayer).
Time to wake-up is noticeably longer than stock firmwares but still not heavily annoying.
Also, besides In-call audio is not working, call receiving is also confirmed not working with LTE connected.
Call will only come through HSPA+ or other networking types than LTE.
This may be only targeted to Korean variant because this issue also happens on Galaxy Note 3 Korean variant.
I'll spend next few days and try to fix this issue.
Another news, which is very bad indeed.
As you may know, Korean variant received KitKat upgrades.
Which changes bootloader and kernel.
AFAIK, 4.4 kernel is only compatible with 4.4 bootloader.
And this CM is based on 4.4 kernel and I don't have much time to rebase it to 4.3 kernel source.
This means, you guys, i9506 users MAY NOT be able to use my CyanogenMod due to incompatibilities between 4.3 and 4.4 kernels & bootloaders.
I'll still upload it for E330 users but, i9506 users, flash it at your own risk!!
- UPDATE 5 -
Got mpdecision working.
This was the easiest thing to solve so far
- UPDATE 6 -
No, mpdecision will break after a bit running time.
Replaced from the kernel with intelli_plug from faux123
- UPDATE 7 -
CyanogenMod team has just pushed massive updates to hlte related to graphics and RIL.
I'm curious to see if the new RIL stuffs can help me solve telephony issues with S4 LTE-A, but the graphics is completely broken and doesn't works beyond March's nightlies.
I'll spend the next few days try to catch up hlte kernel source's graphics stuffs(which seems extremely hard).
- UPDATE 8 -
Fully merged all graphics drivers from CyanogenMod to S4 LTE-A.
Now, this has solved video studdering issue from UPDATE 4 and should provide better graphics performance overall now that we have a full, upstream-maintained, opensource hwcomposer implementation
Now digging in to RIL...
- UPDATE 9 -
Somehow, after merging graphics drivers, In-call audio is working...?
Confused, but still very good to have more stuffs working
Call receiving on LTE is still left to be solved...
- UPDATE 10 -
No progress on solving incoming calls...
I'd rather release despite the error..
<Unable-to-receive-incoming-calls-via-LTE error is only specific to e330s/e330k with 4.4 KitKat radio&bootloader. Which MAY mean everyone else(i9506) may not have this error and ready for daily driver out-of-the-box>
Can anyone confirm e330s kernel is compatible with i9506?
- RELEASED -
Go get 'em!!
http://forum.xda-developers.com/showthread.php?t=2691639

looking good.

Come on man! We are waiting like this news for a while!
"Envoyé depuis mon GT-I9506 avec Tapatalk"

Hey!
Nice news man, keep it going! Hopely you get it working properly.
Peace for all!!!

Nice work !
"Envoyé depuis mon GT-I9506 avec Tapatalk"

Looking forwad to this..

Very nice news!!!!! :good:

Updated.

Quite excited to see how this progresses!

This is the best thing I have heard all week! Will be following this thread!
Thanks given.

Updated.

Awesome stuff.

thank you for working on this...
good luck.
it should be now day 2

can't wait to try this out

Good job!! keep trying!!

pure awsomeness. much love! :laugh:

no update today?
i check this thread every day...

Updated.

haigel said:
no update today?
i check this thread every day...
Click to expand...
Click to collapse
Thank you for waiting
I'm a busy student and development lacks due to studying
I'll try to update status as much as possible

Good!! Time to get my phone back, but i guess we have to wait untill Samsung release the source for the i9506 specifically..?

Related

[KERNEL][TF101] Nvidia 3.1.10 Divemaster --- nearly ready!

Android Nvidia Tegra 3.1 - Codename Divemaster
for
Asus TF101
Welcome to the first pre-alphas of the 3.1 Nvidia Tegra Kernel series.
This kernel is way smoother and faster than any other (2.6.39.4) kernel available.
Guevor's 3.1 kernel is a 2.6.39.4 kernel with few things backported.
I am very proud to finally be able to announce the first public preview of this.
I am the only developer for this (at the moment).
If you want to help me with developing, post in this thread or pm me !
Any help from any kernel developers is appreciated. The updated source is at GITHUB.
Please don't confuse the two commiters; RaymanFX is my GitHub account on Mac OS 10.7.4, skirata is my GitHub account in my virtual Ubuntu system.
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
WORKING lll NOT WORKING lll SIDENOTES
working
WiFi
GPS/SAT
FM34 voice processor
AL3000 ambient light driver
ATMEL_MT9 touchscreen driver
BQ20Z75 battery gauge driver
TCP_VENO
Hotplug governor
not working
Sound
sidenotes
there are some performance issues as of now, those will be taken care of later.
CAUTION
Flashing this is your own risk. I am not responsible in any ways if your device transforms, explodes or smth else. Always keep this in mind !
lll DOWNLOADS lll
v1.0 - recoded the kernel from ground-up
Code from http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/android-tegra-nv-3.1
Fixed up WiFi (BCMDHD)
Fixed suspend/resume & lp0, lp1, lp2 tegra states
New hotplug governor
lll CREDITS lll
Roach2010 - I stalked his GitHub many days to learn how to develop kernels
Guevor - my all time master and teacher
paulburton - your efforts will never be forgotten
Could you take a moment to explain the advantages of the newer drivers over what we have currently?
Just a general question. Isn't this a Tegra 2 Linux 3.1 Kernel? Your thread headline is somewhat misleading...
@ osho741 :
The improvements are countless. Please read the changelog at kernel.org to get an idea.
New drivers deliver more features and better qualitiy.
@Radenam :
No, this is the android-tegra branch right from nvidia, and the different SoCs (tegra2, tegra3) share some common features. This is basically applicible for the tf201 to some point for example.
I just got done flashing it. It is quite snappy, on e the WiFi bug is worked out I will
test it more as there is not a lot that can be tested with it at the moment. Booted just fine on eos jellybean build 60
Agreed very snappy, the wifi almost seems like it wants to connect, under settings the wifi on/off keeps switching back and forth every half a second and it does see my router when its on. im on eos #60 also, few bugs ive found so far:
it seems to power off or freeze when the screens off for more then 10 seconds
Im getting a few random full freezes that require a reboot
also auto rotate isnt working
Nice work,thanks man.
#Excited!
#OhBoy!
#TF101-k_v3.1.X
#WEEEEEEE
#Profit?
just kidding, all jokes aside, since ICS/JB are truly meant for K_v3+ I look forward to this refreshing the desire of the development community
Looks like I have something new to look forward to. Will be keeping a close eye on this. Great worm so far, will do some in-depth testing once wifi is corrected.
Sent from my Transformer TF101 using xda premium
can't wait for the ICS version!
Good luck!
P00t said:
can't wait for the ICS version!
Good luck!
Click to expand...
Click to collapse
You can test it, RaymanFX said it may work on ics
Everyone seems so excited about this., but what makes it better than guevor's #696?
nice try...
it boots but does not work.
Nice to see that development for our device isnt dead.
Great work!
No offence, I am sure this is super awesome, but I think you made a typo in the thread name - "Nvidida"!
Will try it soon, seems like it could be pretty awesome. Though, I still wish you continued your ROMs, your AOSP build was freakin' awesome
Gd luck for the future.
Will report back later.
lewishnl said:
No offence, I am sure this is super awesome, but I think you made a typo in the thread name - "Nvidida"!
Will try it soon, seems like it could be pretty awesome. Though, I still wish you continued your ROMs, your AOSP build was freakin' awesome
Gd luck for the future.
Will report back later.
Click to expand...
Click to collapse
AOSP development will be continued due to high user's request
Typo is corrected.
Thanks for letting me know.
I am working hard at the moment to provide the battery meter.
Overclocking support and undervolting is to follow.
Another nice job Rayman, I will be flashing this as soon as the sleep bug is fixed!
I am a little confused, did you+other kernel devs port 3.1, or did you base it off of a nvidia 3.1 source?
Either way, awesome work, and I am looking forward to seeing build #4 of AOSP soon! It's nice that a quickly aging device like this is getting such awesome support .

[ROM][4.4.4][KTU84Q][OFFICIAL] SlimKat - Mondrianwifi-[+Weeklies]

SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
New thread http://forum.xda-developers.com/showthread.php?t=3158767
Disclaimer: SlimRoms are not responsible for any damages to your device.
Woot official.
Use apps like TricksterMod to play with kernel options
Kernel Features:
Linaro 4.9
Compiled with GCC Ofast
Graphite flags
Optimization GCC flags
A lot of kernel fixes
Intelliplug (Thanks Faux123) [Default still mpdecision]
Massive update for arm specific (Thanks Faux123)
Good deal of changes to Oom (Thanks Faux123)
Changes to Random & Frandom (Thanks Imoseyon)
Updates to Writeback
Arm optimized RWSEM (Thanks Faux123)
Zram [Default off]
Isn't this going to be official prbassplayer?
I will close my thread accordingly. Good work.
Looking forward to "Official" Slimkat for the Tab Pro 8.4! I am currently running the unofficial 7.9 and so far things are good. BT works! . Thanks for all your hard work!
Downloading now. I'll have to wait till tomorrow to flash. Thanks a ton @prbassplayer. Also thanks to @arrrghhh for his prior unofficial builds.
From my Tab Pro 8.4
Flashed and running. Tested Bluetooth with my MOGA controller. I'm thrilled to be able to use it again. Thanks, Josue. How are you liking this neat little tablet?
From my Tab Pro 8.4
Ugh I can't believe I'm back on a Samsung device, but I couldn't find anything as good for the price. Besides the fact the size imo is better than 7invh tabs. That being said Samsung needs to shoot the software engineers that made there Touchwiz launcher. By far the lagging launcher I've ever used... Of all time... Think my old captivate lagged less. As for aosp support it isn't half bad. Crpalmer has been working his ars off on this and many thanks to him.
prbassplayer said:
Ugh I can't believe I'm back on a Samsung device, but I couldn't find anything as good for the price. Besides the fact the size imo is better than 7invh tabs. That being said Samsung needs to shoot the software engineers that made there Touchwiz launcher. By far the lagging launcher I've ever used... Of all time... Think my old captivate lagged less. As for aosp support it isn't half bad. Crpalmer has been working his ars off on this and many thanks to him.
Click to expand...
Click to collapse
Absolutely, huge respect and gratitude are due to Mr Palmer.
The only knock on the Tab Pro I can find, once you remove TW, is the battery life. I'm actually fine with the 7-8 hours of screen on time I average with Slim, but there are tablets that do much better. The screen is,I think, the standout feature. Beautiful and just the right size. Are you thinking of tweaking the kernel any (once you get everything else straight, of course)?
From my Tab Pro 8.4
I already did on the build I released here. My personal build is using Linaro 4.9 with Ofast gcc optimizations. Not sure how much more though. I tried to get faux sound but I've been unable to get Ardmore gains to work . You can use apps like TricksterMod to play around with kernel settings
Sent from my Slim powered Galaxy Tab Pro 8.4
Any word on auto focus working in camera settings? It always defaults back to continuous, regardless what you choose
Sent from my SM-T320 using Tapatalk
Absolutely none. And honestly not priority
Sent from my Slim powered Galaxy Tab Pro 8.4
So much for not being priority...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not sure when I'm merging it's a mix of 4 or 5 commits need to narrow and polish
Sent from my Slim powered Galaxy Tab Pro 8.4
Sound issue.
No sound. Anyone has the same problem?
Moa1480 said:
No sound. Anyone has the same problem?
Click to expand...
Click to collapse
I've had this once. Rebooted and it was fine. I haven't been able to debug sadly. Next up in my todo list.
Moa1480 said:
No sound. Anyone has the same problem?
Click to expand...
Click to collapse
Yeah, I have had the same problem (reboot worked). I am sometimes getting "DSP Manager has stopped working" as well. One time it locked up my tablet completely and had to do a hard reset. Even with that, I love this ROM, especially TRDS!
prbassplayer said:
I've had this once. Rebooted and it was fine. I haven't been able to debug sadly. Next up in my todo list.
Click to expand...
Click to collapse
Works so far..
---------- Post added at 09:26 PM ---------- Previous post was at 09:23 PM ----------
ilatimer1 said:
Yeah, I have had the same problem (reboot worked). I am sometimes getting "DSP Manager has stopped working" as well. One time it locked up my tablet completely and had to do a hard reset. Even with that, I love this ROM, especially TRDS!
Click to expand...
Click to collapse
Got ``DSP Manager has stopped working`` also. Reboot worked...
there's times I don't have sound either, I have to reboot
Sent from my SM-T320 using Tapatalk
I've not yet experienced this. Not too helpful,I know, but just saying.
From my Tab Pro 8.4
prbassplayer said:
So much for not being priority...
Not sure when I'm merging it's a mix of 4 or 5 commits need to narrow and polish
Sent from my Slim powered Galaxy Tab Pro 8.4
Click to expand...
Click to collapse
hmmm, so the auto focus is being fixed? Or something else?
Sent from my SM-T320 using Tapatalk
Battery life is pretty darn good.
From my Tab Pro 8.4

[Q&A] [ROM][P900][UNOFFICIAL] Cyanogenmod 11

Q&A for [ROM][P900][UNOFFICIAL] Cyanogenmod 11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
GPS functionality
The 20141014 build seems to have issues resolving GPS signals versus 20141010 and prior.
I can only "lock" signal under clear skies and no cover with the new build.
Prior builds, rooted TouchScreen builds and the "stock" builds have no issues finding /locking GPS under cover (within reason anyhow, effective Faraday buildings notwithstanding), e.g. while sitting at my desk.
Even as little shelter as my car provides "blocks" signal for the 20141014 build, but not for the others as mentioned above.
Hopefully this can be fixed in the next release along with the vibration bug.
No issues whatsoever with GPS lock on 10/14 build. This is from the bottom floor of a three story brick condo. Agreed that vibe not working though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys! Thanks u so much for the ROM is AWESOME
But i have a problem, with samsung stock based roms, when i use S-pen, the physical buttons dont works, so if i hold accidentaly recents or back button while im writing the buttons dont works, What can i do to disable while im writing like in samsung stock? It is possible? Its importante for me becausei use this tablet for taking notes at university
Thanks 4 all guys
Can anyone help me with the Sleep of dead :/?
Aurondios said:
Can anyone help me with the Sleep of dead :/?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B-6nm7Jks0W5NHktYUROOTVSNFU/view?usp=sharing
use this firmware ar temporary fix of sod
With all this great work, providing CM11 on the P900; does that mean we may one day see CM12 for this machine? i.e. will the P900 become a fully supported member of the CM family?
First off thanks for the much needed custom rom! I am very greatfull!
Here are some issues i am having
1 . printing to myhp printer doesnt work properly on cm i tried installing hp app but it dosnt find the printer a lot of the time, and on stock it wrked flawlessly, also on stock when i printed a photo from galary i had both hp print option and a red samsung logo print option that had more capabilities such as greyscale and resizing , now there is no samsung option ,i reallyvlikevthat samsung printing so i tried installing samsung print from playstore but it doesnt connect to the hp printer and its not what was on stock cause there is no red logo option when i print from galary.
2. How do i extract snote from stock nandroid backup to install on cm i tried com.snote blah blah and it didnt work if someone could point me to the apk that would be great
3. Cifs/samba kernal support for mounting windows shares to the local filesystem, Could someone release a kernal supporting cifs or a kernal module i feel it is appropriate function for this tablet , was surprised samsung had not included it for thier " productivity tablet"
Camera is not working on my device (P900).
"Cant connect to camera" or something.
Otherwise runs fine.
Will this work on the 907 AT&T version?
Drew489 said:
Will this work on the 907 AT&T version?
Click to expand...
Click to collapse
No. P900 only, must have Exynos CPU.
Newest CM11 Build
Had the latest build and am experiencing no camera functionality and longer boot times. But, the ROM is otherwise stable and smoother than Touch Wiz.
This is on the P900 also.
whats about the battery life?
And could anyone post a antutu score?
thank ya
I am loving my note pro like never before. Thanks to all who have worked on this.
Question: I am only able to connect to my 2.4 ghz part of my router not the 5G speed. I have installed the extra kernel with VT. Should I flash original kernel?
ROM "Flavors"...
I have to agree with bonuzz's "Option #2" - less frequent updates (barring bugfixes), stable versions, maintain good battery life.
If you decide to support only one or two flavors of AOSP ROM, I'd vote for CM, followed by Omni.
While custom kernels are always great - as long as I can set the included kernel to "ondemand", I'm a pretty happy camper.
Thanks!
Hi everybody
Now that my SM-P900 works again (the touchscreen functionality was broken) I would love to be able to play some SNES/N64 ROMs on that huge tablet.
Unfortunately I had to realize that my XBOX 360 Controllers doesn't work with this CM11 version.. after asking Google I found out that it may be caused by the not loaded xpad.ko kernel module.
Is there a way to load it manually? Or do I have to recompile the ROM with the module enabled? If yes, how to do this?
http://www.reddit.com/r/cyanogenmod/comments/2ehlbv/galaxy_s4_cm11_game_pad_support/
Volans21 said:
Hi everybody
Now that my SM-P900 works again (the touchscreen functionality was broken) I would love to be able to play some SNES/N64 ROMs on that huge tablet.
Unfortunately I had to realize that my XBOX 360 Controllers doesn't work with this CM11 version.. after asking Google I found out that it may be caused by the not loaded xpad.ko kernel module.
Is there a way to load it manually? Or do I have to recompile the ROM with the module enabled? If yes, how to do this?
http://www.reddit.com/r/cyanogenmod/comments/2ehlbv/galaxy_s4_cm11_game_pad_support/
Click to expand...
Click to collapse
ask Valera to turn on xpad module in kernel on next release.
Nando14sunny said:
whats about the battery life?
And could anyone post a antutu score?
thank ya
Click to expand...
Click to collapse
Battery life is about 6-hr SOT, mixed lighting
I don't believe in benchmarks when comparing ROMs
Increase Volume?
Is there any way to increase the volume? The sounds, media, ringtones, etc sound really low even when they are at the maximum level.
Missing Options From Menu
So far loving this rom. However, I can't find the "Stylus Gestures" or "Show icon when using stylus" under the Language and input category. When I search the menu they are list as results, but they are not actually in the menu. Am I missing something?

[ROM][11.0][TULIP][OFFICIAL] Pixel Extended [AOSP][20201/11/21]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for Xiaomi Redmi Note 6 Pro[tulip]
What is this?
PixelExtended ROM (or PEX for short), We are Combining Pixel Goodies with some essential features you were missing in Pixel Experience, delivering a ROM that promise you stabilty and being feature-rich at the same time . TBH this ROM will keep it's Pixel' idea intact and won't be bloat with unwanted features .
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11 (R)
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound / vibration
Known issues
Night light
Features That are Available At the Moment
This Is very Initial Build Of Android 11 (Stock) , some features will be adapted in near future .
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Sourceforge Host
Donate
Liked my work? Give me a beer
Stay tuned
Device Support Group​
Android OS version: 11
Security patch level: October 2020
Build author/Device Maintainer: Niteshkumar
Kernel Source: https://github.com/xiaomi-sdm660/android_kernel_xiaomi_sdm660
Source code: https://github.com/PixelExtended
PixelExtended Developer: Aryan Gupta
​
Update November 2020!
Device side changelogs:-
- Coral Nov FP
- Safety Net passes by default
- Rounded corners while hiding notch
- Added back Doze and XiaomiParts
- Enabled HAL3 for whatsapp , fixed Web login too
- Switched to AOSP location support
- Updated Qcom Hals
- Used ATOM-X kernel as default
- Kernel upstream 4.4.244
Thank you for your work.
Camera didn't work for me. (Force stop)
Formatting sd card as portable did not work but formatting as phone storage works.
Berkelium said:
Thank you for your work.
Camera didn't work for me. (Force stop)
Formatting sd card as portable did not work but formatting as phone storage works.
Click to expand...
Click to collapse
Please disable default cam and install other gcam, I'll fix it in next update
Rom works very well!!
But I have 2 problems now, the camera doesn't work and the background of the song on the lock screen when I'm using any player (PowerAMP, Spotify, YT Music) doesn't work
Skidrow26 said:
Rom works very well!!
But I have 2 problems now, the camera doesn't work and the background of the song on the lock screen when I'm using any player (PowerAMP, Spotify, YT Music) doesn't work
Click to expand...
Click to collapse
This should work.
https://forum.xda-developers.com/apps/google-camera-mods/google-camera-urnyx05-t3937515
Berkelium said:
Thank you for your work.
Camera didn't work for me. (Force stop)
Formatting sd card as portable did not work but formatting as phone storage works.
Click to expand...
Click to collapse
I second this.. can't access SD card as storage so all music ROMs etc stored there I can't copy or use. Couldn't get a fast operating useful gcam to work. Went back to 10.0 version.
some sensors no work good. like orientation. when i use lever apps. bubbles no move
I appreciate your work but I found are several problems in the rom.
These are the follows:
1, The pocked mode is not working, when you get out the device from your pocket the screen stays dark, even if any notification is still not opened.
2, if you switch on the screen on option for a tilt angle also not working.
3, The waving over the screen by your hand to wake up the screen also not working. It worked after the first install.
4, The knock wake up is problematic, when the phone is in deep sleep the know still not wake up the screen.
5, In a call when you plug the headset it's randomly mute the microphone.
A pre installed camera working in the messaging apps (whatsAPP, Viber) but not in a standalone. I installed another camera app.
I found an issue with the stock launcher. Sometimes when I open an app it freezes on the splash screen and it won't let me close or open other apps. Only reboot fixes it. Using another launcher right now
I found another bug.
The tethering can be start, and can be connect to the phone but doesn't provide mobile network.
Hello everyone, I see there are minor issues here and there like nightlight, usb and others idk, it's an alpha build as we see android 11 development just started, hopefully next build should fix everything and should be usable as daily driver even now it's usable as daily driver I guess, thanks for reporting the issues and supporting the ROM.
Niteshkumar2k said:
Hello everyone, I see there are minor issues here and there like nightlight, usb and others idk, it's an alpha build as we see android 11 development just started, hopefully next build should fix everything and should be usable as daily driver even now it's usable as daily driver I guess, thanks for reporting the issues and supporting the ROM.
Click to expand...
Click to collapse
Do you have any idea when the new build will gonna be released?
Hi. Excellent work. Congratulations to the team. Keep in that way. Cheers,
Gyroscope sensor and few sensors are not working properly in this ROM. Please try to fix this as soon as possible. Over-all the pixel extended experience was good and very free to use.
gabrielgaldino said:
Do you have any idea when the new build will gonna be released?
Click to expand...
Click to collapse
We have some work going on source, It might take some more time but worth a wait, There should be an update for this month.
pentakalyan said:
Gyroscope sensor and few sensors are not working properly in this ROM. Please try to fix this as soon as possible. Over-all the pixel extended experience was good and very free to use.
Click to expand...
Click to collapse
Yeah noted! It's issue with source we're fixing it
Niteshkumar2k said:
We have some work going on source, It might take some more time but worth a wait, There should be an update for this month.
Click to expand...
Click to collapse
Thank you for the answer, i love this ROM and your work. You guys are the real heroes!
Is it FBE?
manavas said:
Is it FBE?
Click to expand...
Click to collapse
Yes it is but since it's an alpha release the encryption seems to be broken

[CLOSED][ROM][UNOFFICIAL][12.0][Crystal] AospExtended [2021/11/12]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - Iam Not Responsible for bricked devices
About AospExtended
AOSP Extended is an AOSP based ROM which provides stock UI/UX experience with useful customizations. Being based on AOSP it provides a smooth experience. We have added useful customizations from various other open-source projects and have tried to keep our things simple. A ROM by a user, for a user. #BeExtended.
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Fingerprint
Installation procedure
Note - I don't recommend to flash any other custom kernels on this rom just to avoid issues .
Click Here for Installation process
Credits
* AEX & CO (For ROM Source Code)
* All the authors in my git sources
* Nokia For kernel Source
* Moderators (For Giving Freedom To Post Threads)
* Nokia 7.1 community Thank you all for your massive support Again
​Join Nokia 7.1 Community​
Download Rom
Download Official Twrp
Android OS version: 12.0.0_r2
Security patch level: October 2021
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/aex-tmp
Changelog Tue Oct 12 05:14:17 UTC 2021
=============================
• initial android 12 build
• based on latest stable sources
• october 2021 security patch
• improved system stability
• user interface enhancements
• GAaps included
You're among the very first developers to port android 12 so thank you very much for your efforts ,also are there any bugs I should be aware of before installing this rom?
So here's my experience after a couple of hours with your port.
I'll start with the bad and then the good stuff.
Bad:
1- there are frame drops when opening settings and when opening notification panel
2- When rotating, the animation seems to be too fast so it needs to be tweaked.
3- The haptic feedback is just too strong when typing that it makes me uncomfortable
4- The Bluetooth is not working (stuck on "turning on" and when I close the notification panel it goes back to off like it wasn't pressed at all)
Good:
1- the rom is quite smooth aside from the laggy animations I mentioned before.
2- The rom is almost bug free so I had a fun experience with it.
3- The battery life is really good, I wish I could still see screen on time numbers from settings like on previous android versions though but that's out of your hand.
also: which Gcam do you recommend for this rom? And is there a customization page in settings?
PS: Excited to see your coming works.
I'd Like to start with a thanks for creating this port
My experience after a couple of hours with your rom is similar to Kamikaze1336 but I found some extra bugs
Screen Recording- Whenever I take a recording and try to playback it doesn't playback rather it just sticks to a frame
Mobile data- Tho I was able to fix this easily in the mobile data setting I did notice some throttle and sometimes it doesn't just work ........... My Internet speed is really fast so I figured it isn't from the carrier
Bluetooth- It wouldn't just turn on so I guess that's a major bug to watch out for
Excluding all these bugs the port is just amazing as the whole ui is smooth, there's little to no frame drop, and the interface is perfect. It'll be captivating to see extra fixes to this rom and porting of other roms.. Thanks
Update*
Upon more experimentation I decided to check out how the ROM will cope after a factory reset and these are the things I noticed
Lag- There were multiple Frame drops as I continued to use this ROM
Apps - There was a multitude of seizures when opening Apps forcing me to reopen them over and over to ensure a working state and sometimes they just don't respond after some seconds
Bluetooth- This is a major bug that would be perfect if fixed .. just pointing it out
For now I'll port back to lineage OS 11 and wait for updates on this ROM ... Thanks again for the wonderful Port
any updates regarding this rom ?
Islam Gomaa said:
any updates regarding this rom ?
Click to expand...
Click to collapse
Raghu is currently working on his private builds (you can access them on his telegram by donating to his project) and I don't think he will be updating this build soon.
News for everyone having bugs with the rom: Raghu has released a new kernel with the fixes on his SourceForge page.
https://sourceforge.net/projects/drg-sprout/files/Black_Caps-Edition/Black_caps-12.0-CLANG-FIH-SDM660-2018-20211117.zip/download
So what does this kernel do? well for me it fixed my bluetooth issues and the system feels more responsive and stable over all.
Hi!
I have some problem in latest build 12 with video players, like NewPipe , can't start play video, got message. " unsupported player" , or " player error "
I don't know where is problem, maybe missing some codec or in vendor stuff ?
Can someone help me?
Loknic4 said:
Hi!
I have some problem in latest build 12 with video players, like NewPipe , can't start play video, got message. " unsupported player" , or " player error "
I don't know where is problem, maybe missing some codec or in vendor stuff ?
Can someone help me?
Click to expand...
Click to collapse
I had a similar problem, whatsapp can't play any videos, it is just stuck at 0 seconds when I press play, doesn't even give any error.
Thread closed on request of OP @Raghu varma

Categories

Resources